@ -1,32 +1,2 @@ | |||
#include "lets_split.h" | |||
#ifdef AUDIO_ENABLE | |||
float tone_startup[][2] = SONG(STARTUP_SOUND); | |||
float tone_goodbye[][2] = SONG(GOODBYE_SOUND); | |||
#endif | |||
void matrix_init_kb(void) { | |||
#ifdef AUDIO_ENABLE | |||
_delay_ms(20); // gets rid of tick | |||
PLAY_NOTE_ARRAY(tone_startup, false, 0); | |||
#endif | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
void shutdown_user(void) { | |||
#ifdef AUDIO_ENABLE | |||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0); | |||
_delay_ms(150); | |||
stop_all_notes(); | |||
#endif | |||
} |
@ -1,25 +1,13 @@ | |||
#ifndef LETS_SPLIT_H | |||
#define LETS_SPLIT_H | |||
#include "quantum.h" | |||
void promicro_bootloader_jmp(bool program); | |||
#ifdef SUBPROJECT_rev1 | |||
#include "rev1.h" | |||
#endif | |||
#ifdef SUBPROJECT_rev2 | |||
#include "rev2.h" | |||
#endif | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ | |||
k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ | |||
k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ | |||
k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05 }, \ | |||
{ k10, k11, k12, k13, k14, k15 }, \ | |||
{ k20, k21, k22, k23, k24, k25 }, \ | |||
{ k30, k31, k32, k33, k34, k35 }, \ | |||
{ k40, k41, k42, k43, k44, k45 }, \ | |||
{ k50, k51, k52, k53, k54, k55 }, \ | |||
{ k60, k61, k62, k63, k64, k65 }, \ | |||
{ k70, k71, k72, k73, k74, k75 } \ | |||
} | |||
#include "quantum.h" | |||
#endif |
@ -0,0 +1,3 @@ | |||
ifndef MAKEFILE_INCLUDED | |||
include ../../Makefile | |||
endif |
@ -0,0 +1,102 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x3060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Wootpatoot | |||
#define PRODUCT Lets Split | |||
#define DESCRIPTION A split keyboard for the cheap makers | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 6 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { B5, B4, E6, D7 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } | |||
#define CATERINA_BOOTLOADER | |||
// #define USE_I2C | |||
// Use serial if not using I2C | |||
#ifndef USE_I2C | |||
# define USE_SERIAL | |||
#endif | |||
// #define EE_HANDS | |||
#define I2C_MASTER_LEFT | |||
// #define I2C_MASTER_RIGHT | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D4 | |||
#define RGBLIGHT_TIMER | |||
#define RGBLED_NUM 8 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
// #define NO_DEBUG | |||
/* disable print */ | |||
// #define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,32 @@ | |||
#include "lets_split.h" | |||
#ifdef AUDIO_ENABLE | |||
float tone_startup[][2] = SONG(STARTUP_SOUND); | |||
float tone_goodbye[][2] = SONG(GOODBYE_SOUND); | |||
#endif | |||
void matrix_init_kb(void) { | |||
#ifdef AUDIO_ENABLE | |||
_delay_ms(20); // gets rid of tick | |||
PLAY_NOTE_ARRAY(tone_startup, false, 0); | |||
#endif | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
void shutdown_user(void) { | |||
#ifdef AUDIO_ENABLE | |||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0); | |||
_delay_ms(150); | |||
stop_all_notes(); | |||
#endif | |||
} |
@ -0,0 +1,25 @@ | |||
#ifndef REV1_H | |||
#define REV1_H | |||
#include "../lets_split.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ | |||
k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ | |||
k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ | |||
k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05 }, \ | |||
{ k10, k11, k12, k13, k14, k15 }, \ | |||
{ k20, k21, k22, k23, k24, k25 }, \ | |||
{ k30, k31, k32, k33, k34, k35 }, \ | |||
{ k40, k41, k42, k43, k44, k45 }, \ | |||
{ k50, k51, k52, k53, k54, k55 }, \ | |||
{ k60, k61, k62, k63, k64, k65 }, \ | |||
{ k70, k71, k72, k73, k74, k75 } \ | |||
} | |||
#endif |
@ -0,0 +1,5 @@ | |||
BACKLIGHT_ENABLE = no | |||
ifndef QUANTUM_DIR | |||
include ../../../Makefile | |||
endif |
@ -0,0 +1,3 @@ | |||
ifndef MAKEFILE_INCLUDED | |||
include ../../Makefile | |||
endif |
@ -0,0 +1,102 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x3060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Wootpatoot | |||
#define PRODUCT Lets Split v2 | |||
#define DESCRIPTION A split keyboard for the cheap makers | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 6 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D7, E6, B4, B5 } | |||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } | |||
#define CATERINA_BOOTLOADER | |||
// #define USE_I2C | |||
// Use serial if not using I2C | |||
#ifndef USE_I2C | |||
# define USE_SERIAL | |||
#endif | |||
// #define EE_HANDS | |||
#define I2C_MASTER_LEFT | |||
// #define I2C_MASTER_RIGHT | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_TIMER | |||
#define RGBLED_NUM 12 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
// #define NO_DEBUG | |||
/* disable print */ | |||
// #define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,32 @@ | |||
#include "lets_split.h" | |||
#ifdef AUDIO_ENABLE | |||
float tone_startup[][2] = SONG(STARTUP_SOUND); | |||
float tone_goodbye[][2] = SONG(GOODBYE_SOUND); | |||
#endif | |||
void matrix_init_kb(void) { | |||
#ifdef AUDIO_ENABLE | |||
_delay_ms(20); // gets rid of tick | |||
PLAY_NOTE_ARRAY(tone_startup, false, 0); | |||
#endif | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
void shutdown_user(void) { | |||
#ifdef AUDIO_ENABLE | |||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0); | |||
_delay_ms(150); | |||
stop_all_notes(); | |||
#endif | |||
} |
@ -0,0 +1,25 @@ | |||
#ifndef REV2_H | |||
#define REV2_H | |||
#include "../lets_split.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ | |||
k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ | |||
k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ | |||
k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05 }, \ | |||
{ k10, k11, k12, k13, k14, k15 }, \ | |||
{ k20, k21, k22, k23, k24, k25 }, \ | |||
{ k30, k31, k32, k33, k34, k35 }, \ | |||
{ k40, k41, k42, k43, k44, k45 }, \ | |||
{ k50, k51, k52, k53, k54, k55 }, \ | |||
{ k60, k61, k62, k63, k64, k65 }, \ | |||
{ k70, k71, k72, k73, k74, k75 } \ | |||
} | |||
#endif |
@ -0,0 +1,5 @@ | |||
BACKLIGHT_ENABLE = no | |||
ifndef QUANTUM_DIR | |||
include ../../../Makefile | |||
endif |
@ -0,0 +1,3 @@ | |||
ifndef MAKEFILE_INCLUDED | |||
include ../../Makefile | |||
endif |
@ -0,0 +1,162 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER You | |||
#define PRODUCT maxipad | |||
#define DESCRIPTION A custom keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 6 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { B6, F7, B2, B3, B1 } | |||
#define MATRIX_COL_PINS { F6, C6, D7, F5, B4, B5 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
// #define BACKLIGHT_PIN B7 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,21 @@ | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
ifndef QUANTUM_DIR | |||
include ../../../../Makefile | |||
endif |
@ -0,0 +1,8 @@ | |||
#ifndef CONFIG_USER_H | |||
#define CONFIG_USER_H | |||
#include "../../config.h" | |||
// place overrides here | |||
#endif |
@ -0,0 +1,54 @@ | |||
#include "maxipad.h" | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = KEYMAP( /* Base */ | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, \ | |||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, \ | |||
KC_LCTL, KC_LALT, MO(1), KC_ENT,KC_GRV,KC_SPC \ | |||
), | |||
[1] = KEYMAP( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \ | |||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ | |||
), | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
}; | |||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||
{ | |||
// MACRODOWN only works in this function | |||
switch(id) { | |||
case 0: | |||
if (record->event.pressed) { | |||
register_code(KC_RSFT); | |||
} else { | |||
unregister_code(KC_RSFT); | |||
} | |||
break; | |||
} | |||
return MACRO_NONE; | |||
}; | |||
void matrix_init_user(void) { | |||
} | |||
void matrix_scan_user(void) { | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
return true; | |||
} | |||
void led_set_user(uint8_t usb_led) { | |||
} |
@ -0,0 +1 @@ | |||
# The default keymap for maxipad |
@ -0,0 +1,28 @@ | |||
#include "maxipad.h" | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// put your per-action keyboard code here | |||
// runs for every action, just before processing by the firmware | |||
return process_record_user(keycode, record); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} |
@ -0,0 +1,25 @@ | |||
#ifndef MAXIPAD_H | |||
#define MAXIPAD_H | |||
#include "quantum.h" | |||
// This a shortcut to help you visually see your layout. | |||
// The following is an example using the Planck MIT layout | |||
// The first section contains all of the arguements | |||
// The second converts the arguments into a two-dimensional array | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, \ | |||
k10, k11, k12, k13, k14, k15, \ | |||
k20, k21, k22, k23, k24, k25, \ | |||
k30, k31, k32, k33, k34, k35, \ | |||
k40, k41, k42, k43, k44, k45 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05 }, \ | |||
{ k10, k11, k12, k13, k14, k15 }, \ | |||
{ k20, k21, k22, k23, k24, k25 }, \ | |||
{ k30, k31, k32, k33, k34, k35 }, \ | |||
{ k40, k41, k42, k43, k44, k45} \ | |||
} | |||
#endif |
@ -0,0 +1,28 @@ | |||
maxipad keyboard firmware | |||
====================== | |||
## Quantum MK Firmware | |||
For the full Quantum feature list, see [the parent readme](/). | |||
## Building | |||
Download or clone the whole firmware and navigate to the keyboards/maxipad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. | |||
Depending on which keymap you would like to use, you will have to compile slightly differently. | |||
### Default | |||
To build with the default keymap, simply run `make default`. | |||
### Other Keymaps | |||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. | |||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this: | |||
``` | |||
$ make [default|jack|<name>] | |||
``` | |||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. |
@ -0,0 +1,67 @@ | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=512 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE ?= yes # Console for debug(+400) | |||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE ?= no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default | |||
MIDI_ENABLE ?= no # MIDI controls | |||
UNICODE_ENABLE ?= no # Unicode | |||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE ?= no # Audio output on port C6 |