Co-authored-by: Drashna Jaelre <drashna@live.com>pull/13978/head
@ -0,0 +1,151 @@ | |||
/* | |||
Copyright 2021 takashicompany | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x7463 // tc = takashicompany | |||
#define PRODUCT_ID 0x0006 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER takashicompany | |||
#define PRODUCT EndZone34 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 10 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { B3, B2, B6, B5 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, D4, C6, D7, E6, B4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||
//#define LED_NUM_LOCK_PIN B0 | |||
//#define LED_CAPS_LOCK_PIN B1 | |||
//#define LED_SCROLL_LOCK_PIN B2 | |||
//#define LED_COMPOSE_PIN B3 | |||
//#define LED_KANA_PIN B4 | |||
//#define BACKLIGHT_PIN B7 | |||
//#define BACKLIGHT_LEVELS 3 | |||
//#define BACKLIGHT_BREATHING | |||
#define RGB_DI_PIN D3 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLED_NUM 9 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
#define RGBLIGHT_EFFECT_BREATHING | |||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
#define RGBLIGHT_EFFECT_SNAKE | |||
#define RGBLIGHT_EFFECT_KNIGHT | |||
#define RGBLIGHT_EFFECT_CHRISTMAS | |||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
#define RGBLIGHT_EFFECT_RGB_TEST | |||
#define RGBLIGHT_EFFECT_ALTERNATING | |||
#define RGBLIGHT_EFFECT_TWINKLE | |||
/*== customize breathing effect ==*/ | |||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
/*==== use exp() and sin() ====*/ | |||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,17 @@ | |||
/* Copyright 2021 takashicompany | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "endzone34.h" |
@ -0,0 +1,39 @@ | |||
/* Copyright 2021 takashicompany | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, \ | |||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, \ | |||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, \ | |||
k31, k32, k33, k34 \ | |||
) { \ | |||
{ k01, k02, k03, k04, k05, k06, k07, k08, k09, k10 }, \ | |||
{ k11, k12, k13, k14, k15, k16, k17, k18, k19, k20 }, \ | |||
{ k21, k22, k23, k24, k25, k26, k27, k28, k29, k30 }, \ | |||
{ KC_NO, KC_NO, KC_NO, k31, k32, k33, k34, KC_NO, KC_NO, KC_NO } \ | |||
} |
@ -0,0 +1,183 @@ | |||
{ | |||
"keyboard_name": "EndZone34", | |||
"url": "https://github.com/takashicompany/endzone34", | |||
"maintainer": "takashicompany", | |||
"width": 12, | |||
"height": 4, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ | |||
"label": "W", | |||
"x": 1, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "E", | |||
"x": 2, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "R", | |||
"x": 3, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "T", | |||
"x": 4, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "Y", | |||
"x": 7, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "U", | |||
"x": 8, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "I", | |||
"x": 9, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "O", | |||
"x": 10, | |||
"y": 0 | |||
}, | |||
{ | |||
"label": "Q", | |||
"x": 0, | |||
"y": 0.5 | |||
}, | |||
{ | |||
"label": "P", | |||
"x": 11, | |||
"y": 0.5 | |||
}, | |||
{ | |||
"label": "S", | |||
"x": 1, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "D", | |||
"x": 2, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "F", | |||
"x": 3, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "G", | |||
"x": 4, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "H", | |||
"x": 7, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "J", | |||
"x": 8, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "K", | |||
"x": 9, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "L", | |||
"x": 10, | |||
"y": 1 | |||
}, | |||
{ | |||
"label": "A", | |||
"x": 0, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "Enter", | |||
"x": 11, | |||
"y": 1.5 | |||
}, | |||
{ | |||
"label": "X", | |||
"x": 1, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": "C", | |||
"x": 2, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": "V", | |||
"x": 3, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": "B", | |||
"x": 4, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": "N", | |||
"x": 7, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": "M", | |||
"x": 8, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": ",", | |||
"x": 9, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": ".", | |||
"x": 10, | |||
"y": 2 | |||
}, | |||
{ | |||
"label": "Z", | |||
"x": 0, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "Back Space", | |||
"x": 11, | |||
"y": 2.5 | |||
}, | |||
{ | |||
"label": "⇓", | |||
"x": 4, | |||
"y": 3 | |||
}, | |||
{ | |||
"label": "Tab", | |||
"x": 5, | |||
"y": 3 | |||
}, | |||
{ | |||
"label": "Space", | |||
"x": 6, | |||
"y": 3 | |||
}, | |||
{ | |||
"label": "⇑", | |||
"x": 7, | |||
"y": 3 | |||
} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,112 @@ | |||
/* Copyright 2021 takashicompany | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT( | |||
LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, | |||
KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, | |||
SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, | |||
ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1)), | |||
LAYOUT( | |||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, | |||
CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, | |||
KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
LAYOUT( | |||
KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, | |||
KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, | |||
KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
LAYOUT( | |||
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, | |||
RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, | |||
RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) | |||
}; | |||
oled_rotation_t oled_init_user(oled_rotation_t rotation) { | |||
return OLED_ROTATION_270; | |||
} | |||
//Variable that stores the number of times the key was pressed | |||
static uint16_t press_count = 0; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
// Increment the counter when a key is pressed | |||
if (record->event.pressed) { | |||
press_count++; | |||
} | |||
return true; | |||
} | |||
#ifdef OLED_DRIVER_ENABLE | |||
static void render_logo(void) { | |||
static const char PROGMEM my_logo[] = { | |||
0x00, 0x00, 0x00, 0xff, 0x01, 0x01, 0x39, 0x29, 0x29, 0x29, 0x29, 0x29, 0xe9, 0x0f, 0x00, 0x00, | |||
0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xf8, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, | |||
0x80, 0x80, 0x80, 0xbf, 0xa0, 0xa0, 0xa7, 0xa5, 0xa5, 0xa5, 0xa5, 0x25, 0x25, 0x3c, 0x00, 0x1f, | |||
0x20, 0x3e, 0x02, 0x3e, 0x20, 0x1f, 0x20, 0x2e, 0x2a, 0x2e, 0x20, 0x1f, 0x00, 0x00, 0x00, 0x00, | |||
0x87, 0x44, 0x24, 0x14, 0x0c, 0x00, 0xc0, 0xa0, 0x90, 0x88, 0x87, 0x00, 0xe0, 0x10, 0xd0, 0x50, | |||
0xd0, 0x10, 0xe0, 0x10, 0xd0, 0x50, 0xd0, 0x10, 0xe0, 0x10, 0xd0, 0x50, 0x50, 0x10, 0xf0, 0x00, | |||
0x07, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x04, 0x07, 0x00, 0x03, 0x04, 0x05, 0x05, | |||
0x05, 0x04, 0x03, 0x04, 0x07, 0x00, 0x07, 0x04, 0x03, 0x04, 0x05, 0x05, 0x05, 0x05, 0x07, 0x00 | |||
}; | |||
oled_write_raw_P(my_logo, sizeof(my_logo)); | |||
} | |||
void oled_task_user(void) { | |||
render_logo(); | |||
oled_set_cursor(0, 5); | |||
oled_write_ln_P(PSTR("Layer"), false); | |||
uint8_t n = get_highest_layer(layer_state); | |||
char layer_str[4]; | |||
layer_str[3] = '\0'; | |||
layer_str[2] = '0' + n % 10; | |||
layer_str[1] = (n /= 10) % 10 ? '0' + (n) % 10 : (n / 10) % 10 ? '0' : ' '; | |||
layer_str[0] = n / 10 ? '0' + n / 10 : ' '; | |||
oled_write_ln(layer_str, false); | |||
oled_write_ln_P(PSTR(" "), false); | |||
oled_write_ln_P(PSTR(" "), false); | |||
oled_write_ln_P(PSTR("Count"), false); | |||
uint16_t m = press_count; | |||
char count_str[6]; | |||
count_str[5] = '\0'; | |||
count_str[4] = '0' + m % 10; | |||
count_str[3] = (m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' '; | |||
count_str[2] = (m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' '; | |||
count_str[1] = (m /= 10) % 10 ? '0' + (m) % 10 : (m / 10) % 10 ? '0' : ' '; | |||
count_str[0] = m / 10 ? '0' + m / 10 : ' '; | |||
oled_write_ln(count_str, false); | |||
} | |||
#endif |
@ -0,0 +1,43 @@ | |||
/* Copyright 2021 takashicompany | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT( | |||
LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, | |||
KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, | |||
SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, | |||
ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1)), | |||
LAYOUT( | |||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, | |||
CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, | |||
KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
LAYOUT( | |||
KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, | |||
KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, | |||
KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
LAYOUT( | |||
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, | |||
RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, | |||
RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) | |||
}; |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,20 @@ | |||
# EndZone34 | |||
![endzone34](https://github.com/takashicompany/endzone34/blob/master/images/main_qmk.jpg?raw=true) | |||
A simple yet fun to use 30% keyboard. | |||
Also supports MX sockets and OLED. | |||
* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) | |||
* Hardware Supported: EndZone34 PCB, Pro Micro | |||
* Hardware Availability: https://github.com/takashicompany/endzone34 | |||
Make example for this keyboard (after setting up your build environment): | |||
make takashicompany/endzone34:default | |||
Flashing example for this keyboard: | |||
make takashicompany/endzone34:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
OLED_DRIVER_ENABLE = yes |