* initial commit TGR Jane * lighting support * use the default keymap lifted from community layouts for LAYOUT_tkl_ansi * add information regarding reset key, hardware supported, and hardware availability * document that it supports v1.1 as well thanks to nickheller's confirmation * update some verbage in the readme * add QMK Configurator support * establish switch matrix for three main layouts * add community layout support * readme fixes * Update keyboards/tgr/jane/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/tgr/jane/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/tgr/jane/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com>pull/6423/head
@ -0,0 +1,38 @@ | |||
/* | |||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
#define VENDOR_ID 0x20A0 | |||
#define PRODUCT_ID 0x422D | |||
#define MANUFACTURER TGR | |||
#define PRODUCT Jane | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 15 | |||
// 0 1 2 3 4 5 6 7 8 9 A B C D E | |||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } | |||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } | |||
#define UNUSED_PINS | |||
#define DIODE_DIRECTION COL2ROW | |||
#define DEBOUNCE 5 | |||
#define BACKLIGHT_LEVELS 1 |
@ -0,0 +1,20 @@ | |||
{ | |||
"keyboard_name": "TGR Jane v2", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 18.25, | |||
"height": 6.5, | |||
"layouts": { | |||
"LAYOUT_all": { | |||
"layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5}, {"x":2.25, "y":5.5}, {"x":3.25, "y":5.5, "w":1.25}, {"x":4.5, "y":5.5, "w":1.25}, {"x":5.75, "y":5.5, "w":1.25}, {"x":7, "y":5.5, "w":1.25}, {"x":8.25, "y":5.5, "w":1.25}, {"x":9.5, "y":5.5, "w":1.25}, {"x":10.75, "y":5.5}, {"x":11.75, "y":5.5}, {"x":12.75, "y":5.5}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] | |||
}, | |||
"LAYOUT_tkl_ansi": { | |||
"layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] | |||
}, | |||
"LAYOUT_tkl_iso": { | |||
"layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] | |||
} | |||
} | |||
} |
@ -0,0 +1,88 @@ | |||
/* Copyright 2019 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "i2c_master.h" | |||
#include "quantum.h" | |||
#ifdef RGBLIGHT_ENABLE | |||
#include "rgblight.h" | |||
extern rgblight_config_t rgblight_config; | |||
void rgblight_set(void) { | |||
if (!rgblight_config.enable) { | |||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||
led[i].r = 0; | |||
led[i].g = 0; | |||
led[i].b = 0; | |||
} | |||
} | |||
i2c_init(); | |||
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
#ifdef RGBLIGHT_ENABLE | |||
if (rgblight_config.enable) { | |||
i2c_init(); | |||
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); | |||
} | |||
#endif | |||
// call user level keymaps, if any | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
#ifdef RGBLIGHT_ENABLE | |||
rgblight_task(); | |||
#endif | |||
matrix_scan_user(); | |||
/* Nothing else for now. */ | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_scan_user(void) { | |||
} | |||
void backlight_init_ports(void) { | |||
// initialize pins D0, D1, D4 and D6 as output | |||
setPinOutput(D0); | |||
setPinOutput(D1); | |||
setPinOutput(D4); | |||
setPinOutput(D6); | |||
// turn backlight LEDs on | |||
writePinHigh(D0); | |||
writePinHigh(D1); | |||
writePinHigh(D4); | |||
writePinHigh(D6); | |||
} | |||
void backlight_set(uint8_t level) { | |||
if (level == 0) { | |||
// turn backlight LEDs off | |||
writePinLow(D0); | |||
writePinLow(D1); | |||
writePinLow(D4); | |||
writePinLow(D6); | |||
} else { | |||
// turn backlight LEDs on | |||
writePinHigh(D0); | |||
writePinHigh(D1); | |||
writePinHigh(D4); | |||
writePinHigh(D6); | |||
} | |||
} |
@ -0,0 +1,77 @@ | |||
/* Copyright 2019 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
// This a shortcut to help you visually see your layout. | |||
// The first section contains all of the arguments | |||
// The second converts the arguments into a two-dimensional array | |||
#define LAYOUT_all( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k6B, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k6C, k6D, k6E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k7C, k7D, k7E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ | |||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k2E, \ | |||
k50, k51, k52, k53, k54, k55, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, k3E, k4E \ | |||
){ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E }, \ | |||
{ k50, k51, k52, k53, k54, k55, KC_NO, k57, k58, k59, k5A, k5B, k5C, k5D, k5E }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6B, k6C, k6D, k6E }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ | |||
} | |||
#define LAYOUT_tkl_ansi( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k6B, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k6C, k6D, k6E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k7C, k7D, k7E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, \ | |||
k40, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k2E, \ | |||
k50, k51, k52, k55, k58, k59, k5A, k5D, k5E, k3E, k4E \ | |||
){ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, KC_NO, k3D, k3E }, \ | |||
{ k40, KC_NO, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, k4E }, \ | |||
{ k50, k51, k52, KC_NO, KC_NO, k55, KC_NO, KC_NO, k58, k59, k5A, KC_NO, KC_NO, k5D, k5E }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6B, k6C, k6D, k6E }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ | |||
} | |||
#define LAYOUT_tkl_iso( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k6B, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k6C, k6D, k6E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k7C, k7D, k7E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ | |||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k2E, \ | |||
k50, k51, k52, k55, k58, k59, k5A, k5D, k5E, k3E, k4E \ | |||
){ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, KC_NO, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, k4E }, \ | |||
{ k50, k51, k52, KC_NO, KC_NO, k55, KC_NO, KC_NO, k58, k59, k5A, KC_NO, KC_NO, k5D, k5E }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6B, k6C, k6D, k6E }, \ | |||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ | |||
} |
@ -0,0 +1,19 @@ | |||
/* Copyright 2018 amnesia0287 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
// place overrides here |
@ -0,0 +1,27 @@ | |||
/* Copyright 2019 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_tkl_ansi(\ | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN, \ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, \ | |||
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT) \ | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for Jane |
@ -0,0 +1,47 @@ | |||
# Jane v2 | |||
TKL Custom Keyboard. | |||
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) | |||
Hardware Supported: TGR Jane (Pontoporia) PCB v1.1, v1.2 | |||
Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=97552.1200) | |||
Make example for this keyboard (after setting up your build environment): | |||
make tgr/jane:default | |||
Flashing | |||
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. | |||
**Reset Key:** Hold down the key located at `K00`, commonly programmed as `Esc` while plugging in the keyboard. | |||
Windows: | |||
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). | |||
2. Place your keyboard into reset. | |||
3. Press the `Find Device` button and ensure that your keyboard is found. | |||
4. Press the `Open .hex File` button and locate the `.hex` file you created. | |||
5. Press the `Flash Device` button and wait for the process to complete. | |||
macOS: | |||
1. Install homebrew by typing the following: | |||
``` | |||
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" | |||
``` | |||
2. Install `crosspack-avr`. | |||
``` | |||
brew cask install crosspack-avr | |||
``` | |||
3. Install the following packages: | |||
``` | |||
brew install python3 | |||
pip3 install pyusb | |||
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb | |||
``` | |||
4. Place your keyboard into reset. | |||
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,50 @@ | |||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||
# | |||
# This program is free software: you can redistribute it and/or modify | |||
# it under the terms of the GNU General Public License as published by | |||
# the Free Software Foundation, either version 2 of the License, or | |||
# (at your option) any later version. | |||
# | |||
# This program is distributed in the hope that it will be useful, | |||
# but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
# GNU General Public License for more details. | |||
# | |||
# You should have received a copy of the GNU General Public License | |||
# along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
# MCU name | |||
MCU = atmega32a | |||
PROTOCOL = VUSB | |||
# unsupported features for now | |||
NO_UART = yes | |||
NO_SUSPEND_POWER_DOWN = yes | |||
# processor frequency | |||
F_CPU = 12000000 | |||
# Bootloader | |||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||
# different sizes, comment this out, and the correct address will be loaded | |||
# automatically (+60). See bootloader.mk for all options. | |||
BOOTLOADER = bootloadHID | |||
# build options | |||
BOOTMAGIC_ENABLE = no | |||
MOUSEKEY_ENABLE = yes | |||
EXTRAKEY_ENABLE = yes | |||
CONSOLE_ENABLE = yes | |||
COMMAND_ENABLE = yes | |||
BACKLIGHT_ENABLE = yes | |||
RGBLIGHT_ENABLE = no | |||
RGBLIGHT_CUSTOM_DRIVER = no | |||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||
QUANTUM_LIB_SRC = i2c_master.c | |||
# programming options | |||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex | |||
LAYOUTS = tkl_ansi tkl_iso |
@ -0,0 +1,393 @@ | |||
/* Name: usbconfig.h | |||
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers | |||
* Author: Christian Starkjohann | |||
* Creation Date: 2005-04-01 | |||
* Tabsize: 4 | |||
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH | |||
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) | |||
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ | |||
*/ | |||
#pragma once | |||
#include "config.h" | |||
/* | |||
General Description: | |||
This file is an example configuration (with inline documentation) for the USB | |||
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is | |||
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may | |||
wire the lines to any other port, as long as D+ is also wired to INT0 (or any | |||
other hardware interrupt, as long as it is the highest level interrupt, see | |||
section at the end of this file). | |||
*/ | |||
/* ---------------------------- Hardware Config ---------------------------- */ | |||
#define USB_CFG_IOPORTNAME D | |||
/* This is the port where the USB bus is connected. When you configure it to | |||
* "B", the registers PORTB, PINB and DDRB will be used. | |||
*/ | |||
#define USB_CFG_DMINUS_BIT 3 | |||
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. | |||
* This may be any bit in the port. | |||
*/ | |||
#define USB_CFG_DPLUS_BIT 2 | |||
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. | |||
* This may be any bit in the port. Please note that D+ must also be connected | |||
* to interrupt pin INT0! [You can also use other interrupts, see section | |||
* "Optional MCU Description" below, or you can connect D- to the interrupt, as | |||
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the | |||
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame | |||
* markers every millisecond.] | |||
*/ | |||
#define USB_CFG_CLOCK_KHZ (F_CPU/1000) | |||
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, | |||
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code | |||
* require no crystal, they tolerate +/- 1% deviation from the nominal | |||
* frequency. All other rates require a precision of 2000 ppm and thus a | |||
* crystal! | |||
* Since F_CPU should be defined to your actual clock rate anyway, you should | |||
* not need to modify this setting. | |||
*/ | |||
#define USB_CFG_CHECK_CRC 0 | |||
/* Define this to 1 if you want that the driver checks integrity of incoming | |||
* data packets (CRC checks). CRC checks cost quite a bit of code size and are | |||
* currently only available for 18 MHz crystal clock. You must choose | |||
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option. | |||
*/ | |||
/* ----------------------- Optional Hardware Config ------------------------ */ | |||
/* #define USB_CFG_PULLUP_IOPORTNAME D */ | |||
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of | |||
* V+, you can connect and disconnect the device from firmware by calling | |||
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). | |||
* This constant defines the port on which the pullup resistor is connected. | |||
*/ | |||
/* #define USB_CFG_PULLUP_BIT 4 */ | |||
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined | |||
* above) where the 1.5k pullup resistor is connected. See description | |||
* above for details. | |||
*/ | |||
/* --------------------------- Functional Range ---------------------------- */ | |||
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 | |||
/* Define this to 1 if you want to compile a version with two endpoints: The | |||
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint | |||
* number). | |||
*/ | |||
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 | |||
/* Define this to 1 if you want to compile a version with three endpoints: The | |||
* default control endpoint 0, an interrupt-in endpoint 3 (or the number | |||
* configured below) and a catch-all default interrupt-in endpoint as above. | |||
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. | |||
*/ | |||
#define USB_CFG_EP3_NUMBER 3 | |||
/* If the so-called endpoint 3 is used, it can now be configured to any other | |||
* endpoint number (except 0) with this macro. Default if undefined is 3. | |||
*/ | |||
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ | |||
/* The above macro defines the startup condition for data toggling on the | |||
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. | |||
* Since the token is toggled BEFORE sending any data, the first packet is | |||
* sent with the oposite value of this configuration! | |||
*/ | |||
#define USB_CFG_IMPLEMENT_HALT 0 | |||
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature | |||
* for endpoint 1 (interrupt endpoint). Although you may not need this feature, | |||
* it is required by the standard. We have made it a config option because it | |||
* bloats the code considerably. | |||
*/ | |||
#define USB_CFG_SUPPRESS_INTR_CODE 0 | |||
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't | |||
* want to send any data over them. If this macro is defined to 1, functions | |||
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if | |||
* you need the interrupt-in endpoints in order to comply to an interface | |||
* (e.g. HID), but never want to send any data. This option saves a couple | |||
* of bytes in flash memory and the transmit buffers in RAM. | |||
*/ | |||
#define USB_CFG_INTR_POLL_INTERVAL 1 | |||
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll | |||
* interval. The value is in milliseconds and must not be less than 10 ms for | |||
* low speed devices. | |||
*/ | |||
#define USB_CFG_IS_SELF_POWERED 0 | |||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the | |||
* device is powered from the USB bus. | |||
*/ | |||
#define USB_CFG_MAX_BUS_POWER 500 | |||
/* Set this variable to the maximum USB bus power consumption of your device. | |||
* The value is in milliamperes. [It will be divided by two since USB | |||
* communicates power requirements in units of 2 mA.] | |||
*/ | |||
#define USB_CFG_IMPLEMENT_FN_WRITE 1 | |||
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out | |||
* transfers. Set it to 0 if you don't need it and want to save a couple of | |||
* bytes. | |||
*/ | |||
#define USB_CFG_IMPLEMENT_FN_READ 0 | |||
/* Set this to 1 if you need to send control replies which are generated | |||
* "on the fly" when usbFunctionRead() is called. If you only want to send | |||
* data from a static buffer, set it to 0 and return the data from | |||
* usbFunctionSetup(). This saves a couple of bytes. | |||
*/ | |||
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 | |||
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. | |||
* You must implement the function usbFunctionWriteOut() which receives all | |||
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number | |||
* can be found in 'usbRxToken'. | |||
*/ | |||
#define USB_CFG_HAVE_FLOWCONTROL 0 | |||
/* Define this to 1 if you want flowcontrol over USB data. See the definition | |||
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in | |||
* usbdrv.h. | |||
*/ | |||
#define USB_CFG_DRIVER_FLASH_PAGE 0 | |||
/* If the device has more than 64 kBytes of flash, define this to the 64 k page | |||
* where the driver's constants (descriptors) are located. Or in other words: | |||
* Define this to 1 for boot loaders on the ATMega128. | |||
*/ | |||
#define USB_CFG_LONG_TRANSFERS 0 | |||
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes | |||
* in a single control-in or control-out transfer. Note that the capability | |||
* for long transfers increases the driver size. | |||
*/ | |||
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ | |||
/* This macro is a hook if you want to do unconventional things. If it is | |||
* defined, it's inserted at the beginning of received message processing. | |||
* If you eat the received message and don't want default processing to | |||
* proceed, do a return after doing your things. One possible application | |||
* (besides debugging) is to flash a status LED on each packet. | |||
*/ | |||
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ | |||
/* This macro is a hook if you need to know when an USB RESET occurs. It has | |||
* one parameter which distinguishes between the start of RESET state and its | |||
* end. | |||
*/ | |||
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ | |||
/* This macro (if defined) is executed when a USB SET_ADDRESS request was | |||
* received. | |||
*/ | |||
#define USB_COUNT_SOF 1 | |||
/* define this macro to 1 if you need the global variable "usbSofCount" which | |||
* counts SOF packets. This feature requires that the hardware interrupt is | |||
* connected to D- instead of D+. | |||
*/ | |||
/* #ifdef __ASSEMBLER__ | |||
* macro myAssemblerMacro | |||
* in YL, TCNT0 | |||
* sts timer0Snapshot, YL | |||
* endm | |||
* #endif | |||
* #define USB_SOF_HOOK myAssemblerMacro | |||
* This macro (if defined) is executed in the assembler module when a | |||
* Start Of Frame condition is detected. It is recommended to define it to | |||
* the name of an assembler macro which is defined here as well so that more | |||
* than one assembler instruction can be used. The macro may use the register | |||
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages | |||
* immediately after an SOF pulse may be lost and must be retried by the host. | |||
* What can you do with this hook? Since the SOF signal occurs exactly every | |||
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in | |||
* designs running on the internal RC oscillator. | |||
* Please note that Start Of Frame detection works only if D- is wired to the | |||
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! | |||
*/ | |||
#define USB_CFG_CHECK_DATA_TOGGLING 0 | |||
/* define this macro to 1 if you want to filter out duplicate data packets | |||
* sent by the host. Duplicates occur only as a consequence of communication | |||
* errors, when the host does not receive an ACK. Please note that you need to | |||
* implement the filtering yourself in usbFunctionWriteOut() and | |||
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable | |||
* for each control- and out-endpoint to check for duplicate packets. | |||
*/ | |||
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 | |||
/* define this macro to 1 if you want the function usbMeasureFrameLength() | |||
* compiled in. This function can be used to calibrate the AVR's RC oscillator. | |||
*/ | |||
#define USB_USE_FAST_CRC 0 | |||
/* The assembler module has two implementations for the CRC algorithm. One is | |||
* faster, the other is smaller. This CRC routine is only used for transmitted | |||
* messages where timing is not critical. The faster routine needs 31 cycles | |||
* per byte while the smaller one needs 61 to 69 cycles. The faster routine | |||
* may be worth the 32 bytes bigger code size if you transmit lots of data and | |||
* run the AVR close to its limit. | |||
*/ | |||
/* -------------------------- Device Description --------------------------- */ | |||
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) | |||
/* USB vendor ID for the device, low byte first. If you have registered your | |||
* own Vendor ID, define it here. Otherwise you may use one of obdev's free | |||
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! | |||
* *** IMPORTANT NOTE *** | |||
* This template uses obdev's shared VID/PID pair for Vendor Class devices | |||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand | |||
* the implications! | |||
*/ | |||
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) | |||
/* This is the ID of the product, low byte first. It is interpreted in the | |||
* scope of the vendor ID. If you have registered your own VID with usb.org | |||
* or if you have licensed a PID from somebody else, define it here. Otherwise | |||
* you may use one of obdev's free shared VID/PID pairs. See the file | |||
* USB-IDs-for-free.txt for details! | |||
* *** IMPORTANT NOTE *** | |||
* This template uses obdev's shared VID/PID pair for Vendor Class devices | |||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand | |||
* the implications! | |||
*/ | |||
#define USB_CFG_DEVICE_VERSION 0x00, 0x02 | |||
/* Version number of the device: Minor number first, then major number. | |||
*/ | |||
#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' | |||
#define USB_CFG_VENDOR_NAME_LEN 13 | |||
/* These two values define the vendor name returned by the USB device. The name | |||
* must be given as a list of characters under single quotes. The characters | |||
* are interpreted as Unicode (UTF-16) entities. | |||
* If you don't want a vendor name string, undefine these macros. | |||
* ALWAYS define a vendor name containing your Internet domain name if you use | |||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for | |||
* details. | |||
*/ | |||
#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' | |||
#define USB_CFG_DEVICE_NAME_LEN 8 | |||
/* Same as above for the device name. If you don't want a device name, undefine | |||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if | |||
* you use a shared VID/PID. | |||
*/ | |||
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ | |||
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ | |||
/* Same as above for the serial number. If you don't want a serial number, | |||
* undefine the macros. | |||
* It may be useful to provide the serial number through other means than at | |||
* compile time. See the section about descriptor properties below for how | |||
* to fine tune control over USB descriptors such as the string descriptor | |||
* for the serial number. | |||
*/ | |||
#define USB_CFG_DEVICE_CLASS 0 | |||
#define USB_CFG_DEVICE_SUBCLASS 0 | |||
/* See USB specification if you want to conform to an existing device class. | |||
* Class 0xff is "vendor specific". | |||
*/ | |||
#define USB_CFG_INTERFACE_CLASS 3 /* HID */ | |||
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ | |||
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ | |||
/* See USB specification if you want to conform to an existing device class or | |||
* protocol. The following classes must be set at interface level: | |||
* HID class is 3, no subclass and protocol required (but may be useful!) | |||
* CDC class is 2, use subclass 2 and protocol 1 for ACM | |||
*/ | |||
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 | |||
/* Define this to the length of the HID report descriptor, if you implement | |||
* an HID device. Otherwise don't define it or define it to 0. | |||
* If you use this define, you must add a PROGMEM character array named | |||
* "usbHidReportDescriptor" to your code which contains the report descriptor. | |||
* Don't forget to keep the array and this define in sync! | |||
*/ | |||
/* #define USB_PUBLIC static */ | |||
/* Use the define above if you #include usbdrv.c instead of linking against it. | |||
* This technique saves a couple of bytes in flash memory. | |||
*/ | |||
/* ------------------- Fine Control over USB Descriptors ------------------- */ | |||
/* If you don't want to use the driver's default USB descriptors, you can | |||
* provide our own. These can be provided as (1) fixed length static data in | |||
* flash memory, (2) fixed length static data in RAM or (3) dynamically at | |||
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more | |||
* information about this function. | |||
* Descriptor handling is configured through the descriptor's properties. If | |||
* no properties are defined or if they are 0, the default descriptor is used. | |||
* Possible properties are: | |||
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched | |||
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is | |||
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if | |||
* you want RAM pointers. | |||
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found | |||
* in static memory is in RAM, not in flash memory. | |||
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), | |||
* the driver must know the descriptor's length. The descriptor itself is | |||
* found at the address of a well known identifier (see below). | |||
* List of static descriptor names (must be declared PROGMEM if in flash): | |||
* char usbDescriptorDevice[]; | |||
* char usbDescriptorConfiguration[]; | |||
* char usbDescriptorHidReport[]; | |||
* char usbDescriptorString0[]; | |||
* int usbDescriptorStringVendor[]; | |||
* int usbDescriptorStringDevice[]; | |||
* int usbDescriptorStringSerialNumber[]; | |||
* Other descriptors can't be provided statically, they must be provided | |||
* dynamically at runtime. | |||
* | |||
* Descriptor properties are or-ed or added together, e.g.: | |||
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) | |||
* | |||
* The following descriptors are defined: | |||
* USB_CFG_DESCR_PROPS_DEVICE | |||
* USB_CFG_DESCR_PROPS_CONFIGURATION | |||
* USB_CFG_DESCR_PROPS_STRINGS | |||
* USB_CFG_DESCR_PROPS_STRING_0 | |||
* USB_CFG_DESCR_PROPS_STRING_VENDOR | |||
* USB_CFG_DESCR_PROPS_STRING_PRODUCT | |||
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER | |||
* USB_CFG_DESCR_PROPS_HID | |||
* USB_CFG_DESCR_PROPS_HID_REPORT | |||
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) | |||
* | |||
* Note about string descriptors: String descriptors are not just strings, they | |||
* are Unicode strings prefixed with a 2 byte header. Example: | |||
* int serialNumberDescriptor[] = { | |||
* USB_STRING_DESCRIPTOR_HEADER(6), | |||
* 'S', 'e', 'r', 'i', 'a', 'l' | |||
* }; | |||
*/ | |||
#define USB_CFG_DESCR_PROPS_DEVICE 0 | |||
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC | |||
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 | |||
#define USB_CFG_DESCR_PROPS_STRINGS 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_0 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 | |||
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 | |||
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC | |||
//#define USB_CFG_DESCR_PROPS_HID 0 | |||
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC | |||
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 | |||
#define USB_CFG_DESCR_PROPS_UNKNOWN 0 | |||
#define usbMsgPtr_t unsigned short | |||
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to | |||
* a scalar type here because gcc generates slightly shorter code for scalar | |||
* arithmetics than for pointer arithmetics. Remove this define for backward | |||
* type compatibility or define it to an 8 bit type if you use data in RAM only | |||
* and all RAM is below 256 bytes (tiny memory model in IAR CC). | |||
*/ | |||
/* ----------------------- Optional MCU Description ------------------------ */ | |||
/* The following configurations have working defaults in usbdrv.h. You | |||
* usually don't need to set them explicitly. Only if you want to run | |||
* the driver on a device which is not yet supported or with a compiler | |||
* which is not fully supported (such as IAR C) or if you use a differnt | |||
* interrupt than INT0, you may have to define some of these. | |||
*/ | |||
/* #define USB_INTR_CFG MCUCR */ | |||
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ | |||
/* #define USB_INTR_CFG_CLR 0 */ | |||
/* #define USB_INTR_ENABLE GIMSK */ | |||
/* #define USB_INTR_ENABLE_BIT INT0 */ | |||
/* #define USB_INTR_PENDING GIFR */ | |||
/* #define USB_INTR_PENDING_BIT INTF0 */ | |||
/* #define USB_INTR_VECTOR INT0_vect */ | |||
/* Set INT1 for D- falling edge to count SOF */ | |||
/* #define USB_INTR_CFG EICRA */ | |||
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) | |||
/* #define USB_INTR_CFG_CLR 0 */ | |||
/* #define USB_INTR_ENABLE EIMSK */ | |||
#define USB_INTR_ENABLE_BIT INT1 | |||
/* #define USB_INTR_PENDING EIFR */ | |||
#define USB_INTR_PENDING_BIT INTF1 | |||
#define USB_INTR_VECTOR INT1_vect |