* adding noah keyboard * Update keyboards/matrix/noah/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/matrix/noah/noah.c Co-Authored-By: Drashna Jaelre <drashna@live.com>pull/7498/head
@ -0,0 +1,131 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/* | |||||
* This file has been automatically generated using ChibiStudio board | |||||
* generator plugin. Do not edit manually. | |||||
*/ | |||||
#include "hal.h" | |||||
#if HAL_USE_PAL || defined(__DOXYGEN__) | |||||
/** | |||||
* @brief PAL setup. | |||||
* @details Digital I/O ports static configuration as defined in @p board.h. | |||||
* This variable is used by the HAL when initializing the PAL driver. | |||||
*/ | |||||
const PALConfig pal_default_config = { | |||||
#if STM32_HAS_GPIOA | |||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, | |||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOB | |||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, | |||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOC | |||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, | |||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOD | |||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, | |||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOE | |||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, | |||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOF | |||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, | |||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOG | |||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, | |||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOH | |||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, | |||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, | |||||
#endif | |||||
#if STM32_HAS_GPIOI | |||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, | |||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} | |||||
#endif | |||||
}; | |||||
#endif | |||||
void enter_bootloader_mode_if_requested(void); | |||||
/** | |||||
* @brief Early initialization code. | |||||
* @details This initialization must be performed just after stack setup | |||||
* and before any other initialization. | |||||
*/ | |||||
void __early_init(void) { | |||||
enter_bootloader_mode_if_requested(); | |||||
stm32_clock_init(); | |||||
} | |||||
#if HAL_USE_SDC || defined(__DOXYGEN__) | |||||
/** | |||||
* @brief SDC card detection. | |||||
*/ | |||||
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { | |||||
(void)sdcp; | |||||
/* TODO: Fill the implementation.*/ | |||||
return true; | |||||
} | |||||
/** | |||||
* @brief SDC card write protection detection. | |||||
*/ | |||||
bool sdc_lld_is_write_protected(SDCDriver *sdcp) { | |||||
(void)sdcp; | |||||
/* TODO: Fill the implementation.*/ | |||||
return false; | |||||
} | |||||
#endif /* HAL_USE_SDC */ | |||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) | |||||
/** | |||||
* @brief MMC_SPI card detection. | |||||
*/ | |||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { | |||||
(void)mmcp; | |||||
/* TODO: Fill the implementation.*/ | |||||
return true; | |||||
} | |||||
/** | |||||
* @brief MMC_SPI card write protection detection. | |||||
*/ | |||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) { | |||||
(void)mmcp; | |||||
/* TODO: Fill the implementation.*/ | |||||
return false; | |||||
} | |||||
#endif | |||||
/** | |||||
* @brief Board-specific initialization code. | |||||
* @todo Add your board-specific code, if any. | |||||
*/ | |||||
void boardInit(void) { | |||||
} |
@ -0,0 +1,5 @@ | |||||
# List of all the board related files. | |||||
BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c | |||||
# Required include directories | |||||
BOARDINC = $(BOARD_PATH)/boards/noah_bd |
@ -0,0 +1,7 @@ | |||||
/* Address for jumping to bootloader on STM32 chips. */ | |||||
/* It is chip dependent, the correct number can be looked up here: | |||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf | |||||
* This also requires a patch to chibios: | |||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch | |||||
*/ | |||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 |
@ -0,0 +1,527 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/** | |||||
* @file templates/chconf.h | |||||
* @brief Configuration file template. | |||||
* @details A copy of this file must be placed in each project directory, it | |||||
* contains the application specific kernel settings. | |||||
* | |||||
* @addtogroup config | |||||
* @details Kernel related settings and hooks. | |||||
* @{ | |||||
*/ | |||||
#ifndef CHCONF_H | |||||
#define CHCONF_H | |||||
#define _CHIBIOS_RT_CONF_ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name System timers settings | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief System time counter resolution. | |||||
* @note Allowed values are 16 or 32 bits. | |||||
*/ | |||||
#define CH_CFG_ST_RESOLUTION 32 | |||||
/** | |||||
* @brief System tick frequency. | |||||
* @details Frequency of the system timer that drives the system ticks. This | |||||
* setting also defines the system tick time unit. | |||||
*/ | |||||
#define CH_CFG_ST_FREQUENCY 10000 | |||||
/** | |||||
* @brief Time delta constant for the tick-less mode. | |||||
* @note If this value is zero then the system uses the classic | |||||
* periodic tick. This value represents the minimum number | |||||
* of ticks that is safe to specify in a timeout directive. | |||||
* The value one is not valid, timeouts are rounded up to | |||||
* this value. | |||||
*/ | |||||
#define CH_CFG_ST_TIMEDELTA 2 | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Kernel parameters and options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Round robin interval. | |||||
* @details This constant is the number of system ticks allowed for the | |||||
* threads before preemption occurs. Setting this value to zero | |||||
* disables the preemption for threads with equal priority and the | |||||
* round robin becomes cooperative. Note that higher priority | |||||
* threads can still preempt, the kernel is always preemptive. | |||||
* @note Disabling the round robin preemption makes the kernel more compact | |||||
* and generally faster. | |||||
* @note The round robin preemption is not supported in tickless mode and | |||||
* must be set to zero in that case. | |||||
*/ | |||||
#define CH_CFG_TIME_QUANTUM 0 | |||||
/** | |||||
* @brief Managed RAM size. | |||||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||||
* then the whole available RAM is used. The core memory is made | |||||
* available to the heap allocator and/or can be used directly through | |||||
* the simplified core memory allocator. | |||||
* | |||||
* @note In order to let the OS manage the whole RAM the linker script must | |||||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||||
*/ | |||||
#define CH_CFG_MEMCORE_SIZE 0 | |||||
/** | |||||
* @brief Idle thread automatic spawn suppression. | |||||
* @details When this option is activated the function @p chSysInit() | |||||
* does not spawn the idle thread. The application @p main() | |||||
* function becomes the idle thread and must implement an | |||||
* infinite loop. | |||||
*/ | |||||
#define CH_CFG_NO_IDLE_THREAD FALSE | |||||
/* Use __WFI in the idle thread for waiting. Does lower the power | |||||
* consumption. */ | |||||
#define CORTEX_ENABLE_WFI_IDLE TRUE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Performance options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief OS optimization. | |||||
* @details If enabled then time efficient rather than space efficient code | |||||
* is used when two possible implementations exist. | |||||
* | |||||
* @note This is not related to the compiler optimization options. | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_OPTIMIZE_SPEED TRUE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Subsystem options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Time Measurement APIs. | |||||
* @details If enabled then the time measurement APIs are included in | |||||
* the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_TM TRUE | |||||
/** | |||||
* @brief Threads registry APIs. | |||||
* @details If enabled then the registry APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_REGISTRY TRUE | |||||
/** | |||||
* @brief Threads synchronization APIs. | |||||
* @details If enabled then the @p chThdWait() function is included in | |||||
* the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_WAITEXIT TRUE | |||||
/** | |||||
* @brief Semaphores APIs. | |||||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_SEMAPHORES TRUE | |||||
/** | |||||
* @brief Semaphores queuing mode. | |||||
* @details If enabled then the threads are enqueued on semaphores by | |||||
* priority rather than in FIFO order. | |||||
* | |||||
* @note The default is @p FALSE. Enable this if you have special | |||||
* requirements. | |||||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||||
*/ | |||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||||
/** | |||||
* @brief Mutexes APIs. | |||||
* @details If enabled then the mutexes APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MUTEXES TRUE | |||||
/** | |||||
* @brief Enables recursive behavior on mutexes. | |||||
* @note Recursive mutexes are heavier and have an increased | |||||
* memory footprint. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||||
*/ | |||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||||
/** | |||||
* @brief Conditional Variables APIs. | |||||
* @details If enabled then the conditional variables APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||||
*/ | |||||
#define CH_CFG_USE_CONDVARS TRUE | |||||
/** | |||||
* @brief Conditional Variables APIs with timeout. | |||||
* @details If enabled then the conditional variables APIs with timeout | |||||
* specification are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||||
*/ | |||||
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE | |||||
/** | |||||
* @brief Events Flags APIs. | |||||
* @details If enabled then the event flags APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_EVENTS TRUE | |||||
/** | |||||
* @brief Events Flags APIs with timeout. | |||||
* @details If enabled then the events APIs with timeout specification | |||||
* are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_EVENTS. | |||||
*/ | |||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||||
/** | |||||
* @brief Synchronous Messages APIs. | |||||
* @details If enabled then the synchronous messages APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MESSAGES TRUE | |||||
/** | |||||
* @brief Synchronous Messages queuing mode. | |||||
* @details If enabled then messages are served by priority rather than in | |||||
* FIFO order. | |||||
* | |||||
* @note The default is @p FALSE. Enable this if you have special | |||||
* requirements. | |||||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||||
*/ | |||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||||
/** | |||||
* @brief Mailboxes APIs. | |||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||||
* included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||||
*/ | |||||
#define CH_CFG_USE_MAILBOXES TRUE | |||||
/** | |||||
* @brief Core Memory Manager APIs. | |||||
* @details If enabled then the core memory manager APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MEMCORE TRUE | |||||
/** | |||||
* @brief Heap Allocator APIs. | |||||
* @details If enabled then the memory heap allocator APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||||
* @p CH_CFG_USE_SEMAPHORES. | |||||
* @note Mutexes are recommended. | |||||
*/ | |||||
#define CH_CFG_USE_HEAP TRUE | |||||
/** | |||||
* @brief Memory Pools Allocator APIs. | |||||
* @details If enabled then the memory pools allocator APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
#define CH_CFG_USE_MEMPOOLS TRUE | |||||
/** | |||||
* @brief Dynamic Threads APIs. | |||||
* @details If enabled then the dynamic threads creation APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||||
*/ | |||||
#define CH_CFG_USE_DYNAMIC TRUE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Debug options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Debug option, kernel statistics. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_STATISTICS FALSE | |||||
/** | |||||
* @brief Debug option, system state check. | |||||
* @details If enabled the correct call protocol for system APIs is checked | |||||
* at runtime. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE | |||||
/** | |||||
* @brief Debug option, parameters checks. | |||||
* @details If enabled then the checks on the API functions input | |||||
* parameters are activated. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_ENABLE_CHECKS FALSE | |||||
/** | |||||
* @brief Debug option, consistency checks. | |||||
* @details If enabled then all the assertions in the kernel code are | |||||
* activated. This includes consistency checks inside the kernel, | |||||
* runtime anomalies and port-defined checks. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_ENABLE_ASSERTS FALSE | |||||
/** | |||||
* @brief Debug option, trace buffer. | |||||
* @details If enabled then the trace buffer is activated. | |||||
* | |||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||||
*/ | |||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||||
/** | |||||
* @brief Trace buffer entries. | |||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||||
*/ | |||||
#define CH_DBG_TRACE_BUFFER_SIZE 128 | |||||
/** | |||||
* @brief Debug option, stack checks. | |||||
* @details If enabled then a runtime stack check is performed. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note The stack check is performed in a architecture/port dependent way. | |||||
* It may not be implemented or some ports. | |||||
* @note The default failure mode is to halt the system with the global | |||||
* @p panic_msg variable set to @p NULL. | |||||
*/ | |||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE | |||||
/** | |||||
* @brief Debug option, stacks initialization. | |||||
* @details If enabled then the threads working area is filled with a byte | |||||
* value when a thread is created. This can be useful for the | |||||
* runtime measurement of the used stack. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
#define CH_DBG_FILL_THREADS FALSE | |||||
/** | |||||
* @brief Debug option, threads profiling. | |||||
* @details If enabled then a field is added to the @p thread_t structure that | |||||
* counts the system ticks occurred while executing the thread. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note This debug option is not currently compatible with the | |||||
* tickless mode. | |||||
*/ | |||||
#define CH_DBG_THREADS_PROFILING FALSE | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Kernel hooks | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Threads descriptor structure extension. | |||||
* @details User fields added to the end of the @p thread_t structure. | |||||
*/ | |||||
#define CH_CFG_THREAD_EXTRA_FIELDS \ | |||||
/* Add threads custom fields here.*/ | |||||
/** | |||||
* @brief Threads initialization hook. | |||||
* @details User initialization code added to the @p chThdInit() API. | |||||
* | |||||
* @note It is invoked from within @p chThdInit() and implicitly from all | |||||
* the threads creation APIs. | |||||
*/ | |||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||||
/* Add threads initialization code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Threads finalization hook. | |||||
* @details User finalization code added to the @p chThdExit() API. | |||||
*/ | |||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||||
/* Add threads finalization code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Context switch hook. | |||||
* @details This hook is invoked just before switching between threads. | |||||
*/ | |||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||||
/* Context switch code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief ISR enter hook. | |||||
*/ | |||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ | |||||
/* IRQ prologue code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief ISR exit hook. | |||||
*/ | |||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ | |||||
/* IRQ epilogue code here.*/ \ | |||||
} | |||||
#define ARM_WFI_IMPL __WFI | |||||
/** | |||||
* @brief Idle thread enter hook. | |||||
* @note This hook is invoked within a critical zone, no OS functions | |||||
* should be invoked from here. | |||||
* @note This macro can be used to activate a power saving mode. | |||||
*/ | |||||
#define CH_CFG_IDLE_ENTER_HOOK() { \ | |||||
/* Idle-enter code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Idle thread leave hook. | |||||
* @note This hook is invoked within a critical zone, no OS functions | |||||
* should be invoked from here. | |||||
* @note This macro can be used to deactivate a power saving mode. | |||||
*/ | |||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||||
/* Idle-leave code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Idle Loop hook. | |||||
* @details This hook is continuously invoked by the idle thread loop. | |||||
*/ | |||||
#define CH_CFG_IDLE_LOOP_HOOK() { \ | |||||
/* Idle loop code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief System tick event hook. | |||||
* @details This hook is invoked in the system tick handler immediately | |||||
* after processing the virtual timers queue. | |||||
*/ | |||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||||
/* System tick event code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief System halt hook. | |||||
* @details This hook is invoked in case to a system halting error before | |||||
* the system is halted. | |||||
*/ | |||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||||
/* System halt code here.*/ \ | |||||
} | |||||
/** | |||||
* @brief Trace hook. | |||||
* @details This hook is invoked each time a new record is written in the | |||||
* trace buffer. | |||||
*/ | |||||
#define CH_CFG_TRACE_HOOK(tep) { \ | |||||
/* Trace code here.*/ \ | |||||
} | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||||
/*===========================================================================*/ | |||||
#endif /* CHCONF_H */ | |||||
/** @} */ |
@ -0,0 +1,54 @@ | |||||
/** | |||||
* config.h | |||||
* | |||||
*/ | |||||
#pragma once | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0x4D58 // MX | |||||
#define PRODUCT_ID 0x0065 // noah 65 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER matrix | |||||
#define PRODUCT NOAH | |||||
#define DESCRIPTION 65% keybaord of the Matrix abel family | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 5 | |||||
#define MATRIX_COLS 15 | |||||
#define DIODE_DIRECTION COL2ROW | |||||
#define DEBOUNCING_DELAY 5 | |||||
// i2c setting | |||||
#define USE_I2CV1 | |||||
#define I2C1_SCL 8 | |||||
#define I2C1_SDA 9 | |||||
#define I2C1_CLOCK_SPEED 400000 | |||||
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 | |||||
#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN (PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN) | |||||
// rgb matrix setting | |||||
#define DRIVER_ADDR_1 0b1110100 | |||||
#define DRIVER_ADDR_2 0b1110110 | |||||
#define DRIVER_COUNT 2 | |||||
#define DRIVER_1_LED_TOTAL 36 | |||||
#define DRIVER_2_LED_TOTAL 36 | |||||
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) | |||||
/* indicator rgb */ | |||||
#define WS2812_LED_N 7 | |||||
#define RGBLED_NUM WS2812_LED_N | |||||
#define WS2812_TIM_N 3 | |||||
#define WS2812_TIM_CH 3 | |||||
#define PORT_WS2812 GPIOB | |||||
#define PIN_WS2812 1 | |||||
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) | |||||
#define WS2812_DMA_CHANNEL 5 // DMA channel for TIMx_UP | |||||
#define RGBLIGHT_ANIMATIONS | |||||
//#define WS2812_EXTERNAL_PULLUP | |||||
// tapping setting | |||||
#define TAPPING_TERM 200 | |||||
#define RETRO_TAPPING | |||||
#define PERMISSIVE_HOLD |
@ -0,0 +1,822 @@ | |||||
/** | |||||
****************************************************************************** | |||||
* @file EEPROM/EEPROM_Emulation/src/eeprom.c | |||||
* @author MCD Application Team | |||||
* @brief This file provides all the EEPROM emulation firmware functions. | |||||
****************************************************************************** | |||||
* @attention | |||||
* | |||||
* <h2><center>© Copyright � 2017 STMicroelectronics International N.V. | |||||
* All rights reserved.</center></h2> | |||||
* | |||||
* Redistribution and use in source and binary forms, with or without | |||||
* modification, are permitted, provided that the following conditions are met: | |||||
* | |||||
* 1. Redistribution of source code must retain the above copyright notice, | |||||
* this list of conditions and the following disclaimer. | |||||
* 2. Redistributions in binary form must reproduce the above copyright notice, | |||||
* this list of conditions and the following disclaimer in the documentation | |||||
* and/or other materials provided with the distribution. | |||||
* 3. Neither the name of STMicroelectronics nor the names of other | |||||
* contributors to this software may be used to endorse or promote products | |||||
* derived from this software without specific written permission. | |||||
* 4. This software, including modifications and/or derivative works of this | |||||
* software, must execute solely and exclusively on microcontroller or | |||||
* microprocessor devices manufactured by or for STMicroelectronics. | |||||
* 5. Redistribution and use of this software other than as permitted under | |||||
* this license is void and will automatically terminate your rights under | |||||
* this license. | |||||
* | |||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" | |||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT | |||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A | |||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY | |||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT | |||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, | |||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, | |||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |||||
* | |||||
****************************************************************************** | |||||
*/ | |||||
/** @addtogroup EEPROM_Emulation | |||||
* @{ | |||||
*/ | |||||
/* Includes ------------------------------------------------------------------*/ | |||||
#include "eeprom_f4.h" | |||||
/* Private typedef -----------------------------------------------------------*/ | |||||
/* Private define ------------------------------------------------------------*/ | |||||
/* Private macro -------------------------------------------------------------*/ | |||||
/* Private variables ---------------------------------------------------------*/ | |||||
/* Global variable used to store variable value in read sequence */ | |||||
uint16_t DataVar = 0; | |||||
/* Virtual address defined by the user: 0xFFFF value is prohibited */ | |||||
extern uint16_t VirtAddVarTab[NB_OF_VAR]; | |||||
/* Private function prototypes -----------------------------------------------*/ | |||||
/* Private functions ---------------------------------------------------------*/ | |||||
static HAL_StatusTypeDef EE_Format(void); | |||||
static uint16_t EE_FindValidPage(uint8_t Operation); | |||||
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data); | |||||
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data); | |||||
static uint16_t EE_VerifyPageFullyErased(uint32_t Address); | |||||
/** | |||||
* @brief Restore the pages to a known good state in case of page's status | |||||
* corruption after a power loss. | |||||
* @param None. | |||||
* @retval - Flash error code: on write Flash error | |||||
* - FLASH_COMPLETE: on success | |||||
*/ | |||||
uint16_t EE_Init(void) | |||||
{ | |||||
uint16_t PageStatus0 = 6, PageStatus1 = 6; | |||||
uint16_t VarIdx = 0; | |||||
uint16_t EepromStatus = 0, ReadStatus = 0; | |||||
int16_t x = -1; | |||||
HAL_StatusTypeDef FlashStatus; | |||||
FLASH_UnlockF4(); | |||||
/* Get Page0 status */ | |||||
PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS); | |||||
/* Get Page1 status */ | |||||
PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS); | |||||
/* Check for invalid header states and repair if necessary */ | |||||
switch (PageStatus0) | |||||
{ | |||||
case ERASED: | |||||
if (PageStatus1 == VALID_PAGE) /* Page0 erased, Page1 valid */ | |||||
{ | |||||
/* Erase Page0 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE0_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
} | |||||
else if (PageStatus1 == RECEIVE_DATA) /* Page0 erased, Page1 receive */ | |||||
{ | |||||
/* Erase Page0 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
/* Mark Page1 as valid */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
else /* First EEPROM access (Page0&1 are erased) or invalid state -> format EEPROM */ | |||||
{ | |||||
/* Erase both Page0 and Page1 and set Page0 as valid page */ | |||||
FlashStatus = EE_Format(); | |||||
/* If erase/program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
break; | |||||
case RECEIVE_DATA: | |||||
if (PageStatus1 == VALID_PAGE) /* Page0 receive, Page1 valid */ | |||||
{ | |||||
/* Transfer data from Page1 to Page0 */ | |||||
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) | |||||
{ | |||||
if (( *(__IO uint16_t*)(PAGE0_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx]) | |||||
{ | |||||
x = VarIdx; | |||||
} | |||||
if (VarIdx != x) | |||||
{ | |||||
/* Read the last variables' updates */ | |||||
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); | |||||
/* In case variable corresponding to the virtual address was found */ | |||||
if (ReadStatus != 0x1) | |||||
{ | |||||
/* Transfer the variable to the Page0 */ | |||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (EepromStatus != HAL_OK) | |||||
{ | |||||
return EepromStatus; | |||||
} | |||||
} | |||||
} | |||||
} | |||||
/* Mark Page0 as valid */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
/* Erase Page1 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
} | |||||
else if (PageStatus1 == ERASED) /* Page0 receive, Page1 erased */ | |||||
{ | |||||
/* Erase Page1 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
/* Mark Page0 as valid */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
else /* Invalid state -> format eeprom */ | |||||
{ | |||||
/* Erase both Page0 and Page1 and set Page0 as valid page */ | |||||
FlashStatus = EE_Format(); | |||||
/* If erase/program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
break; | |||||
case VALID_PAGE: | |||||
if (PageStatus1 == VALID_PAGE) /* Invalid state -> format eeprom */ | |||||
{ | |||||
/* Erase both Page0 and Page1 and set Page0 as valid page */ | |||||
FlashStatus = EE_Format(); | |||||
/* If erase/program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
else if (PageStatus1 == ERASED) /* Page0 valid, Page1 erased */ | |||||
{ | |||||
/* Erase Page1 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
} | |||||
else /* Page0 valid, Page1 receive */ | |||||
{ | |||||
/* Transfer data from Page0 to Page1 */ | |||||
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) | |||||
{ | |||||
if ((*(__IO uint16_t*)(PAGE1_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx]) | |||||
{ | |||||
x = VarIdx; | |||||
} | |||||
if (VarIdx != x) | |||||
{ | |||||
/* Read the last variables' updates */ | |||||
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); | |||||
/* In case variable corresponding to the virtual address was found */ | |||||
if (ReadStatus != 0x1) | |||||
{ | |||||
/* Transfer the variable to the Page1 */ | |||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (EepromStatus != HAL_OK) | |||||
{ | |||||
return EepromStatus; | |||||
} | |||||
} | |||||
} | |||||
} | |||||
/* Mark Page1 as valid */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
/* Erase Page0 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE0_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
} | |||||
break; | |||||
default: /* Any other state -> format eeprom */ | |||||
/* Erase both Page0 and Page1 and set Page0 as valid page */ | |||||
FlashStatus = EE_Format(); | |||||
/* If erase/program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
break; | |||||
} | |||||
return HAL_OK; | |||||
} | |||||
/** | |||||
* @brief Verify if specified page is fully erased. | |||||
* @param Address: page address | |||||
* This parameter can be one of the following values: | |||||
* @arg PAGE0_BASE_ADDRESS: Page0 base address | |||||
* @arg PAGE1_BASE_ADDRESS: Page1 base address | |||||
* @retval page fully erased status: | |||||
* - 0: if Page not erased | |||||
* - 1: if Page erased | |||||
*/ | |||||
uint16_t EE_VerifyPageFullyErased(uint32_t Address) | |||||
{ | |||||
uint32_t ReadStatus = 1; | |||||
uint16_t AddressValue = 0x5555; | |||||
/* Check each active page address starting from end */ | |||||
while (Address <= PAGE0_END_ADDRESS) | |||||
{ | |||||
/* Get the current location content to be compared with virtual address */ | |||||
AddressValue = (*(__IO uint16_t*)Address); | |||||
/* Compare the read address with the virtual address */ | |||||
if (AddressValue != ERASED) | |||||
{ | |||||
/* In case variable value is read, reset ReadStatus flag */ | |||||
ReadStatus = 0; | |||||
break; | |||||
} | |||||
/* Next address location */ | |||||
Address = Address + 4; | |||||
} | |||||
/* Return ReadStatus value: (0: Page not erased, 1: Sector erased) */ | |||||
return ReadStatus; | |||||
} | |||||
/** | |||||
* @brief Returns the last stored variable data, if found, which correspond to | |||||
* the passed virtual address | |||||
* @param VirtAddress: Variable virtual address | |||||
* @param Data: Global variable contains the read variable value | |||||
* @retval Success or error status: | |||||
* - 0: if variable was found | |||||
* - 1: if the variable was not found | |||||
* - NO_VALID_PAGE: if no valid page was found. | |||||
*/ | |||||
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data) | |||||
{ | |||||
uint16_t ValidPage = PAGE0; | |||||
uint16_t AddressValue = 0x5555, ReadStatus = 1; | |||||
uint32_t Address = EEPROM_START_ADDRESS, PageStartAddress = EEPROM_START_ADDRESS; | |||||
/* Get active Page for read operation */ | |||||
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE); | |||||
/* Check if there is no valid page */ | |||||
if (ValidPage == NO_VALID_PAGE) | |||||
{ | |||||
return NO_VALID_PAGE; | |||||
} | |||||
/* Get the valid Page start Address */ | |||||
PageStartAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE)); | |||||
/* Get the valid Page end Address */ | |||||
Address = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE)); | |||||
/* Check each active page address starting from end */ | |||||
while (Address > (PageStartAddress + 2)) | |||||
{ | |||||
/* Get the current location content to be compared with virtual address */ | |||||
AddressValue = (*(__IO uint16_t*)Address); | |||||
/* Compare the read address with the virtual address */ | |||||
if (AddressValue == VirtAddress) | |||||
{ | |||||
/* Get content of Address-2 which is variable value */ | |||||
*Data = (*(__IO uint16_t*)(Address - 2)); | |||||
/* In case variable value is read, reset ReadStatus flag */ | |||||
ReadStatus = 0; | |||||
break; | |||||
} | |||||
else | |||||
{ | |||||
/* Next address location */ | |||||
Address = Address - 4; | |||||
} | |||||
} | |||||
/* Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) */ | |||||
return ReadStatus; | |||||
} | |||||
/** | |||||
* @brief Writes/upadtes variable data in EEPROM. | |||||
* @param VirtAddress: Variable virtual address | |||||
* @param Data: 16 bit data to be written | |||||
* @retval Success or error status: | |||||
* - FLASH_COMPLETE: on success | |||||
* - PAGE_FULL: if valid page is full | |||||
* - NO_VALID_PAGE: if no valid page was found | |||||
* - Flash error code: on write Flash error | |||||
*/ | |||||
uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data) | |||||
{ | |||||
uint16_t Status = 0; | |||||
/* Write the variable virtual address and value in the EEPROM */ | |||||
Status = EE_VerifyPageFullWriteVariable(VirtAddress, Data); | |||||
/* In case the EEPROM active page is full */ | |||||
if (Status == PAGE_FULL) | |||||
{ | |||||
/* Perform Page transfer */ | |||||
Status = EE_PageTransfer(VirtAddress, Data); | |||||
} | |||||
/* Return last operation status */ | |||||
return Status; | |||||
} | |||||
/** | |||||
* @brief Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE | |||||
* @param None | |||||
* @retval Status of the last operation (Flash write or erase) done during | |||||
* EEPROM formating | |||||
*/ | |||||
static HAL_StatusTypeDef EE_Format(void) | |||||
{ | |||||
HAL_StatusTypeDef FlashStatus = HAL_OK; | |||||
/* Erase Page0 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE0_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
/* Set Page0 as valid page: Write VALID_PAGE at Page0 base address */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
/* Erase Page1 */ | |||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS)) | |||||
{ | |||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
} | |||||
return HAL_OK; | |||||
} | |||||
/** | |||||
* @brief Find valid Page for write or read operation | |||||
* @param Operation: operation to achieve on the valid page. | |||||
* This parameter can be one of the following values: | |||||
* @arg READ_FROM_VALID_PAGE: read operation from valid page | |||||
* @arg WRITE_IN_VALID_PAGE: write operation from valid page | |||||
* @retval Valid page number (PAGE or PAGE1) or NO_VALID_PAGE in case | |||||
* of no valid page was found | |||||
*/ | |||||
static uint16_t EE_FindValidPage(uint8_t Operation) | |||||
{ | |||||
uint16_t PageStatus0 = 6, PageStatus1 = 6; | |||||
/* Get Page0 actual status */ | |||||
PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS); | |||||
/* Get Page1 actual status */ | |||||
PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS); | |||||
/* Write or read operation */ | |||||
switch (Operation) | |||||
{ | |||||
case WRITE_IN_VALID_PAGE: /* ---- Write operation ---- */ | |||||
if (PageStatus1 == VALID_PAGE) | |||||
{ | |||||
/* Page0 receiving data */ | |||||
if (PageStatus0 == RECEIVE_DATA) | |||||
{ | |||||
return PAGE0; /* Page0 valid */ | |||||
} | |||||
else | |||||
{ | |||||
return PAGE1; /* Page1 valid */ | |||||
} | |||||
} | |||||
else if (PageStatus0 == VALID_PAGE) | |||||
{ | |||||
/* Page1 receiving data */ | |||||
if (PageStatus1 == RECEIVE_DATA) | |||||
{ | |||||
return PAGE1; /* Page1 valid */ | |||||
} | |||||
else | |||||
{ | |||||
return PAGE0; /* Page0 valid */ | |||||
} | |||||
} | |||||
else | |||||
{ | |||||
return NO_VALID_PAGE; /* No valid Page */ | |||||
} | |||||
case READ_FROM_VALID_PAGE: /* ---- Read operation ---- */ | |||||
if (PageStatus0 == VALID_PAGE) | |||||
{ | |||||
return PAGE0; /* Page0 valid */ | |||||
} | |||||
else if (PageStatus1 == VALID_PAGE) | |||||
{ | |||||
return PAGE1; /* Page1 valid */ | |||||
} | |||||
else | |||||
{ | |||||
return NO_VALID_PAGE ; /* No valid Page */ | |||||
} | |||||
default: | |||||
return PAGE0; /* Page0 valid */ | |||||
} | |||||
} | |||||
/** | |||||
* @brief Verify if active page is full and Writes variable in EEPROM. | |||||
* @param VirtAddress: 16 bit virtual address of the variable | |||||
* @param Data: 16 bit data to be written as variable value | |||||
* @retval Success or error status: | |||||
* - FLASH_COMPLETE: on success | |||||
* - PAGE_FULL: if valid page is full | |||||
* - NO_VALID_PAGE: if no valid page was found | |||||
* - Flash error code: on write Flash error | |||||
*/ | |||||
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data) | |||||
{ | |||||
HAL_StatusTypeDef FlashStatus = HAL_OK; | |||||
uint16_t ValidPage = PAGE0; | |||||
uint32_t Address = EEPROM_START_ADDRESS, PageEndAddress = EEPROM_START_ADDRESS+PAGE_SIZE; | |||||
/* Get valid Page for write operation */ | |||||
ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE); | |||||
/* Check if there is no valid page */ | |||||
if (ValidPage == NO_VALID_PAGE) | |||||
{ | |||||
return NO_VALID_PAGE; | |||||
} | |||||
/* Get the valid Page start Address */ | |||||
Address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE)); | |||||
/* Get the valid Page end Address */ | |||||
PageEndAddress = (uint32_t)((EEPROM_START_ADDRESS - 1) + (uint32_t)((ValidPage + 1) * PAGE_SIZE)); | |||||
/* Check each active page address starting from begining */ | |||||
while (Address < PageEndAddress) | |||||
{ | |||||
/* Verify if Address and Address+2 contents are 0xFFFFFFFF */ | |||||
if ((*(__IO uint32_t*)Address) == 0xFFFFFFFF) | |||||
{ | |||||
/* Set variable data */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(Address, Data); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
/* Set variable virtual address */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(Address + 2, VirtAddress); | |||||
/* Return program operation status */ | |||||
return FlashStatus; | |||||
} | |||||
else | |||||
{ | |||||
/* Next address location */ | |||||
Address = Address + 4; | |||||
} | |||||
} | |||||
/* Return PAGE_FULL in case the valid page is full */ | |||||
return PAGE_FULL; | |||||
} | |||||
/** | |||||
* @brief Transfers last updated variables data from the full Page to | |||||
* an empty one. | |||||
* @param VirtAddress: 16 bit virtual address of the variable | |||||
* @param Data: 16 bit data to be written as variable value | |||||
* @retval Success or error status: | |||||
* - FLASH_COMPLETE: on success | |||||
* - PAGE_FULL: if valid page is full | |||||
* - NO_VALID_PAGE: if no valid page was found | |||||
* - Flash error code: on write Flash error | |||||
*/ | |||||
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data) | |||||
{ | |||||
HAL_StatusTypeDef FlashStatus = HAL_OK; | |||||
uint32_t NewPageAddress = EEPROM_START_ADDRESS; | |||||
uint16_t OldPageId=0; | |||||
uint16_t ValidPage = PAGE0, VarIdx = 0; | |||||
uint16_t EepromStatus = 0, ReadStatus = 0; | |||||
/* Get active Page for read operation */ | |||||
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE); | |||||
if (ValidPage == PAGE1) /* Page1 valid */ | |||||
{ | |||||
/* New page address where variable will be moved to */ | |||||
NewPageAddress = PAGE0_BASE_ADDRESS; | |||||
/* Old page ID where variable will be taken from */ | |||||
OldPageId = PAGE1_ID; | |||||
} | |||||
else if (ValidPage == PAGE0) /* Page0 valid */ | |||||
{ | |||||
/* New page address where variable will be moved to */ | |||||
NewPageAddress = PAGE1_BASE_ADDRESS; | |||||
/* Old page ID where variable will be taken from */ | |||||
OldPageId = PAGE0_ID; | |||||
} | |||||
else | |||||
{ | |||||
return NO_VALID_PAGE; /* No valid Page */ | |||||
} | |||||
/* Set the new Page status to RECEIVE_DATA status */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, RECEIVE_DATA); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
/* Write the variable passed as parameter in the new active page */ | |||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (EepromStatus != HAL_OK) | |||||
{ | |||||
return EepromStatus; | |||||
} | |||||
/* Transfer process: transfer variables from old to the new active page */ | |||||
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++) | |||||
{ | |||||
if (VirtAddVarTab[VarIdx] != VirtAddress) /* Check each variable except the one passed as parameter */ | |||||
{ | |||||
/* Read the other last variable updates */ | |||||
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar); | |||||
/* In case variable corresponding to the virtual address was found */ | |||||
if (ReadStatus != 0x1) | |||||
{ | |||||
/* Transfer the variable to the new active page */ | |||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (EepromStatus != HAL_OK) | |||||
{ | |||||
return EepromStatus; | |||||
} | |||||
} | |||||
} | |||||
} | |||||
/* Erase the old Page: Set old Page status to ERASED status */ | |||||
FlashStatus = FLASH_EraseSectorF4(OldPageId); | |||||
/* If erase operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
/* Set new Page status to VALID_PAGE status */ | |||||
FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, VALID_PAGE); | |||||
/* If program operation was failed, a Flash error code is returned */ | |||||
if (FlashStatus != HAL_OK) | |||||
{ | |||||
return FlashStatus; | |||||
} | |||||
/* Return last operation flash status */ | |||||
return FlashStatus; | |||||
} | |||||
/* flash operation */ | |||||
#define EraseTimeout ((uint32_t)0x00000FFF) | |||||
#define ProgramTimeout ((uint32_t)0x0000001F) | |||||
#define FLASH_PSIZE_BYTE 0 | |||||
#define FLASH_PSIZE_HFWORD FLASH_CR_PSIZE_0 | |||||
#define FLASH_PSIZE_WORD FLASH_CR_PSIZE_1 | |||||
#define FLASH_CR_SNB_Pos 3 | |||||
#define FLASH_KEY1_F4 0x45670123 | |||||
#define FLASH_KEY2_F4 0xCDEF89AB | |||||
#define ASSERT(exp) (void)((0)) | |||||
static void Flash_Delay(void) | |||||
{ | |||||
__IO uint32_t i = 0; | |||||
for(i = 0xFF; i != 0; i--) { } | |||||
} | |||||
static HAL_StatusTypeDef FLASH_GetStatus(void) | |||||
{ | |||||
if ((FLASH->SR & FLASH_SR_BSY) == FLASH_SR_BSY) | |||||
return HAL_BUSY; | |||||
if ((FLASH->SR & (FLASH_SR_PGSERR|FLASH_SR_PGPERR|FLASH_SR_PGAERR)) != 0) | |||||
return HAL_ERROR; | |||||
if ((FLASH->SR & FLASH_SR_WRPERR) != 0 ) | |||||
return HAL_ERROR; | |||||
if ((FLASH->SR & FLASH_SR_SOP) != 0 ) | |||||
return HAL_ERROR; | |||||
return HAL_OK; | |||||
} | |||||
static HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t timeout) | |||||
{ | |||||
/* Check for the Flash Status */ | |||||
HAL_StatusTypeDef status = FLASH_GetStatus(); | |||||
/* Wait for a Flash operation to complete or a TIMEOUT to occur */ | |||||
while ((status == HAL_BUSY) && (timeout != 0x00)) | |||||
{ | |||||
Flash_Delay(); | |||||
status = FLASH_GetStatus(); | |||||
timeout--; | |||||
} | |||||
if (timeout == 0) | |||||
status = HAL_TIMEOUT; | |||||
return status; | |||||
} | |||||
HAL_StatusTypeDef FLASH_UnlockF4(void) | |||||
{ | |||||
FLASH->KEYR = FLASH_KEY1_F4; | |||||
FLASH->KEYR = FLASH_KEY2_F4; | |||||
return HAL_OK; | |||||
} | |||||
HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector) | |||||
{ | |||||
HAL_StatusTypeDef status = HAL_OK; | |||||
/* Wait for last operation to be completed */ | |||||
status = FLASH_WaitForLastOperation(EraseTimeout); | |||||
if(status == HAL_OK) { | |||||
/* if the previous operation is completed, proceed to erase the page */ | |||||
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE); | |||||
FLASH->CR |= FLASH_PSIZE_WORD; | |||||
CLEAR_BIT(FLASH->CR, FLASH_CR_SNB); | |||||
FLASH->CR |= FLASH_CR_SER | (sector << FLASH_CR_SNB_Pos); | |||||
FLASH->CR |= FLASH_CR_STRT; | |||||
/* Wait for last operation to be completed */ | |||||
status = FLASH_WaitForLastOperation(EraseTimeout); | |||||
if(status != HAL_TIMEOUT) | |||||
{ | |||||
/* if the erase operation is completed, disable the PER Bit */ | |||||
FLASH->CR &= ~FLASH_CR_SNB; | |||||
FLASH->CR &= ~FLASH_CR_SER; | |||||
} | |||||
FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_WRPERR); | |||||
} | |||||
/* Return the Erase Status */ | |||||
return status; | |||||
} | |||||
HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data) | |||||
{ | |||||
HAL_StatusTypeDef status = HAL_ERROR; | |||||
if (IS_FLASH_ADDRESS(address)) | |||||
{ | |||||
/* Wait for last operation to be completed */ | |||||
status = FLASH_WaitForLastOperation(ProgramTimeout); | |||||
if(status == HAL_OK) { | |||||
// set size to byte | |||||
FLASH->CR &= ~FLASH_CR_PSIZE; | |||||
FLASH->CR |= FLASH_PSIZE_HFWORD; | |||||
FLASH->CR |= FLASH_CR_PG; | |||||
*(__IO uint16_t*)address = data; | |||||
/* Wait for last operation to be completed */ | |||||
status = FLASH_WaitForLastOperation(ProgramTimeout); | |||||
if(status != HAL_TIMEOUT) | |||||
{ | |||||
/* if the program operation is completed, disable the PG Bit */ | |||||
FLASH->CR &= ~FLASH_CR_PG; | |||||
} | |||||
FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR | FLASH_SR_WRPERR); | |||||
} | |||||
} | |||||
return status; | |||||
} | |||||
/** | |||||
* @} | |||||
*/ | |||||
/******************* (C) COPYRIGHT 2017 STMicroelectronics *****END OF FILE****/ |
@ -0,0 +1,130 @@ | |||||
/** | |||||
****************************************************************************** | |||||
* @file EEPROM/EEPROM_Emulation/inc/eeprom.h | |||||
* @author MCD Application Team | |||||
* @brief This file contains all the functions prototypes for the EEPROM | |||||
* emulation firmware library. | |||||
****************************************************************************** | |||||
* @attention | |||||
* | |||||
* <h2><center>© Copyright � 2017 STMicroelectronics International N.V. | |||||
* All rights reserved.</center></h2> | |||||
* | |||||
* Redistribution and use in source and binary forms, with or without | |||||
* modification, are permitted, provided that the following conditions are met: | |||||
* | |||||
* 1. Redistribution of source code must retain the above copyright notice, | |||||
* this list of conditions and the following disclaimer. | |||||
* 2. Redistributions in binary form must reproduce the above copyright notice, | |||||
* this list of conditions and the following disclaimer in the documentation | |||||
* and/or other materials provided with the distribution. | |||||
* 3. Neither the name of STMicroelectronics nor the names of other | |||||
* contributors to this software may be used to endorse or promote products | |||||
* derived from this software without specific written permission. | |||||
* 4. This software, including modifications and/or derivative works of this | |||||
* software, must execute solely and exclusively on microcontroller or | |||||
* microprocessor devices manufactured by or for STMicroelectronics. | |||||
* 5. Redistribution and use of this software other than as permitted under | |||||
* this license is void and will automatically terminate your rights under | |||||
* this license. | |||||
* | |||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" | |||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT | |||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A | |||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY | |||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT | |||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, | |||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, | |||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |||||
* | |||||
****************************************************************************** | |||||
*/ | |||||
/* Define to prevent recursive inclusion -------------------------------------*/ | |||||
#ifndef __EEPROM_H | |||||
#define __EEPROM_H | |||||
/* Includes ------------------------------------------------------------------*/ | |||||
#include "hal.h" | |||||
typedef enum | |||||
{ | |||||
HAL_OK = 0x00U, | |||||
HAL_ERROR = 0x01U, | |||||
HAL_BUSY = 0x02U, | |||||
HAL_TIMEOUT = 0x03U | |||||
} HAL_StatusTypeDef; | |||||
/* Exported constants --------------------------------------------------------*/ | |||||
/* EEPROM emulation firmware error codes */ | |||||
#define EE_OK (uint32_t)HAL_OK | |||||
#define EE_ERROR (uint32_t)HAL_ERROR | |||||
#define EE_BUSY (uint32_t)HAL_BUSY | |||||
#define EE_TIMEOUT (uint32_t)HAL_TIMEOUT | |||||
/* Define the size of the sectors to be used */ | |||||
#define PAGE_SIZE (uint32_t)0x4000 /* Page size = 16KByte */ | |||||
/* Device voltage range supposed to be [2.7V to 3.6V], the operation will | |||||
be done by word */ | |||||
#define VOLTAGE_RANGE (uint8_t)VOLTAGE_RANGE_3 | |||||
/* EEPROM start address in Flash */ | |||||
#define EEPROM_START_ADDRESS ((uint32_t)0x08008000) /* EEPROM emulation start address: | |||||
from sector2 : after 16KByte of used | |||||
Flash memory */ | |||||
/* Pages 0 and 1 base and end addresses */ | |||||
#define PAGE0_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x0000)) | |||||
#define PAGE0_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (PAGE_SIZE - 1))) | |||||
#define PAGE0_ID 2//FLASH_SECTOR_2 | |||||
#define PAGE1_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x4000)) | |||||
#define PAGE1_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (2 * PAGE_SIZE - 1))) | |||||
#define PAGE1_ID 3//FLASH_SECTOR_3 | |||||
/* Used Flash pages for EEPROM emulation */ | |||||
#define PAGE0 ((uint16_t)0x0000) | |||||
#define PAGE1 ((uint16_t)0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/ | |||||
/* No valid page define */ | |||||
#define NO_VALID_PAGE ((uint16_t)0x00AB) | |||||
/* Page status definitions */ | |||||
#define ERASED ((uint16_t)0xFFFF) /* Page is empty */ | |||||
#define RECEIVE_DATA ((uint16_t)0xEEEE) /* Page is marked to receive data */ | |||||
#define VALID_PAGE ((uint16_t)0x0000) /* Page containing valid data */ | |||||
/* Valid pages in read and write defines */ | |||||
#define READ_FROM_VALID_PAGE ((uint8_t)0x00) | |||||
#define WRITE_IN_VALID_PAGE ((uint8_t)0x01) | |||||
/* Page full define */ | |||||
#define PAGE_FULL ((uint8_t)0x80) | |||||
/* Variables' number */ | |||||
#define NB_OF_VAR ((uint8_t)0x16) | |||||
/* Exported types ------------------------------------------------------------*/ | |||||
/* Exported macro ------------------------------------------------------------*/ | |||||
/* Exported functions ------------------------------------------------------- */ | |||||
HAL_StatusTypeDef FLASH_UnlockF4(void); | |||||
HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector); | |||||
HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data); | |||||
uint16_t EE_Init(void); | |||||
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data); | |||||
uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data); | |||||
#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= EEPROM_START_ADDRESS) && ((ADDRESS) < PAGE1_END_ADDRESS)) | |||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) >= PAGE0_ID) && ((SECTOR) <= PAGE1_ID)) | |||||
#endif /* __EEPROM_H */ | |||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
@ -0,0 +1,388 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/** | |||||
* @file templates/halconf.h | |||||
* @brief HAL configuration header. | |||||
* @details HAL configuration file, this file allows to enable or disable the | |||||
* various device drivers from your application. You may also use | |||||
* this file in order to override the device drivers default settings. | |||||
* | |||||
* @addtogroup HAL_CONF | |||||
* @{ | |||||
*/ | |||||
#ifndef HALCONF_H | |||||
#define HALCONF_H | |||||
#include "mcuconf.h" | |||||
/** | |||||
* @brief Enables the PAL subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||||
#define HAL_USE_PAL TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the ADC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_ADC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the CAN subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||||
#define HAL_USE_CAN FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the DAC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_DAC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the EXT subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) | |||||
#define HAL_USE_EXT FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the GPT subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||||
#define HAL_USE_GPT TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the I2C subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||||
#define HAL_USE_I2C TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the I2S subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||||
#define HAL_USE_I2S FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the ICU subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||||
#define HAL_USE_ICU FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the MAC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_MAC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the MMC_SPI subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||||
#define HAL_USE_MMC_SPI FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the PWM subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||||
#define HAL_USE_PWM TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the QSPI subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) | |||||
#define HAL_USE_QSPI FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the RTC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_RTC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SDC subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SDC FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SERIAL subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SERIAL FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SERIAL over USB subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SERIAL_USB FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the SPI subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||||
#define HAL_USE_SPI TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the UART subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||||
#define HAL_USE_UART FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the USB subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||||
#define HAL_USE_USB TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the WDG subsystem. | |||||
*/ | |||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||||
#define HAL_USE_WDG FALSE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* ADC driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||||
#define ADC_USE_WAIT TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* CAN driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Sleep mode related APIs inclusion switch. | |||||
*/ | |||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||||
#define CAN_USE_SLEEP_MODE TRUE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* I2C driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||||
*/ | |||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* MAC driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables an event sources for incoming packets. | |||||
*/ | |||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||||
#define MAC_USE_ZERO_COPY FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables an event sources for incoming packets. | |||||
*/ | |||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||||
#define MAC_USE_EVENTS TRUE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* MMC_SPI driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Delays insertions. | |||||
* @details If enabled this options inserts delays into the MMC waiting | |||||
* routines releasing some extra CPU time for the threads with | |||||
* lower priority, this may slow down the driver a bit however. | |||||
* This option is recommended also if the SPI driver does not | |||||
* use a DMA channel and heavily loads the CPU. | |||||
*/ | |||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||||
#define MMC_NICE_WAITING TRUE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* SDC driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Number of initialization attempts before rejecting the card. | |||||
* @note Attempts are performed at 10mS intervals. | |||||
*/ | |||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||||
#define SDC_INIT_RETRY 100 | |||||
#endif | |||||
/** | |||||
* @brief Include support for MMC cards. | |||||
* @note MMC support is not yet implemented so this option must be kept | |||||
* at @p FALSE. | |||||
*/ | |||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||||
#define SDC_MMC_SUPPORT FALSE | |||||
#endif | |||||
/** | |||||
* @brief Delays insertions. | |||||
* @details If enabled this options inserts delays into the MMC waiting | |||||
* routines releasing some extra CPU time for the threads with | |||||
* lower priority, this may slow down the driver a bit however. | |||||
*/ | |||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||||
#define SDC_NICE_WAITING TRUE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* SERIAL driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Default bit rate. | |||||
* @details Configuration parameter, this is the baud rate selected for the | |||||
* default configuration. | |||||
*/ | |||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||||
#define SERIAL_DEFAULT_BITRATE 38400 | |||||
#endif | |||||
/** | |||||
* @brief Serial buffers size. | |||||
* @details Configuration parameter, you can change the depth of the queue | |||||
* buffers depending on the requirements of your application. | |||||
* @note The default is 16 bytes for both the transmission and receive | |||||
* buffers. | |||||
*/ | |||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||||
#define SERIAL_BUFFERS_SIZE 16 | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* SERIAL_USB driver related setting. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Serial over USB buffers size. | |||||
* @details Configuration parameter, the buffer size must be a multiple of | |||||
* the USB data endpoint maximum packet size. | |||||
* @note The default is 256 bytes for both the transmission and receive | |||||
* buffers. | |||||
*/ | |||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||||
#define SERIAL_USB_BUFFERS_SIZE 256 | |||||
#endif | |||||
/** | |||||
* @brief Serial over USB number of buffers. | |||||
* @note The default is 2 buffers. | |||||
*/ | |||||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||||
#define SERIAL_USB_BUFFERS_NUMBER 2 | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* SPI driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||||
#define SPI_USE_WAIT TRUE | |||||
#endif | |||||
/** | |||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
#define SPI_USE_MUTUAL_EXCLUSION FALSE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* UART driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||||
#define UART_USE_WAIT FALSE | |||||
#endif | |||||
/** | |||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
#define UART_USE_MUTUAL_EXCLUSION FALSE | |||||
#endif | |||||
/*===========================================================================*/ | |||||
/* USB driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||||
#define USB_USE_WAIT TRUE | |||||
#endif | |||||
#endif /* HALCONF_H */ | |||||
/** @} */ |
@ -0,0 +1,721 @@ | |||||
{ | |||||
"keyboard_name": "NOAH", | |||||
"url": "", | |||||
"maintainer": "astro", | |||||
"width": 16, | |||||
"height": 5, | |||||
"layouts": { | |||||
"LAYOUT_default": { | |||||
"key_count": 68, | |||||
"layout": [ | |||||
{ | |||||
"label": "~", | |||||
"x": 0, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "!", | |||||
"x": 1, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "@", | |||||
"x": 2, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "#", | |||||
"x": 3, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "$", | |||||
"x": 4, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "%", | |||||
"x": 5, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "^", | |||||
"x": 6, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "&", | |||||
"x": 7, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "*", | |||||
"x": 8, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "(", | |||||
"x": 9, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": ")", | |||||
"x": 10, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "_", | |||||
"x": 11, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "+", | |||||
"x": 12, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "|", | |||||
"x": 13, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label":"Backspace", | |||||
"x": 14, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label":"Print Screen", | |||||
"x": 15, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "Tab", | |||||
"x": 0, | |||||
"y": 1, | |||||
"w": 1.5 | |||||
}, | |||||
{ | |||||
"label": "Q", | |||||
"x": 1.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "W", | |||||
"x": 2.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "E", | |||||
"x": 3.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "R", | |||||
"x": 4.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "T", | |||||
"x": 5.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "Y", | |||||
"x": 6.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "U", | |||||
"x": 7.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "I", | |||||
"x": 8.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "O", | |||||
"x": 9.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "P", | |||||
"x": 10.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "{", | |||||
"x": 11.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "}", | |||||
"x": 12.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "|", | |||||
"x": 13.5, | |||||
"y": 1, | |||||
"w": 1.5 | |||||
}, | |||||
{ "label": "Page Up", | |||||
"x": 15, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "Caps Lock", | |||||
"x": 0, | |||||
"y": 2, | |||||
"w": 1.75 | |||||
}, | |||||
{ | |||||
"label": "A", | |||||
"x": 1.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "S", | |||||
"x": 2.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "D", | |||||
"x": 3.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "F", | |||||
"x": 4.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "G", | |||||
"x": 5.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "H", | |||||
"x": 6.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "J", | |||||
"x": 7.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "K", | |||||
"x": 8.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "L", | |||||
"x": 9.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": ":", | |||||
"x": 10.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "\"", | |||||
"x": 11.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "Enter", | |||||
"x": 12.75, | |||||
"y": 2, | |||||
"w": 2.25 | |||||
}, | |||||
{ | |||||
"label": "Page Down", | |||||
"x": 15, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "Shift", | |||||
"x": 0, | |||||
"y": 3, | |||||
"w": 2.25 | |||||
}, | |||||
{ | |||||
"label": "Z", | |||||
"x": 2.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "X", | |||||
"x": 3.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "C", | |||||
"x": 4.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "V", | |||||
"x": 5.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "B", | |||||
"x": 6.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "N", | |||||
"x": 7.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "M", | |||||
"x": 8.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "<", | |||||
"x": 9.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": ">", | |||||
"x": 10.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "?", | |||||
"x": 11.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "Shift", | |||||
"x": 12.25, | |||||
"y": 3, | |||||
"w": 1.75 | |||||
}, | |||||
{ | |||||
"label": "Up", | |||||
"x": 14, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "End" | |||||
"x": 15, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "Ctrl", | |||||
"x": 0, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Win", | |||||
"x": 1.25, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Alt", | |||||
"x": 2.5, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"x": 3.75, | |||||
"y": 4, | |||||
"w": 6.25 | |||||
}, | |||||
{ | |||||
"label": "Alt", | |||||
"x": 10, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Win", | |||||
"x": 11.25, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Left", | |||||
"x": 13, | |||||
"y": 4 | |||||
}, | |||||
{ | |||||
"label": "Down", | |||||
"x": 14, | |||||
"y": 4 | |||||
}, | |||||
{ | |||||
"label": "Right", | |||||
"x": 15, | |||||
"y": 4 | |||||
} | |||||
] | |||||
}, | |||||
"LAYOUT_iso": { | |||||
"key_count": 68, | |||||
"layout": [ | |||||
{ | |||||
"label": "~", | |||||
"x": 0, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "!", | |||||
"x": 1, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "@", | |||||
"x": 2, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "#", | |||||
"x": 3, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "$", | |||||
"x": 4, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "%", | |||||
"x": 5, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "^", | |||||
"x": 6, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "&", | |||||
"x": 7, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "*", | |||||
"x": 8, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "(", | |||||
"x": 9, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": ")", | |||||
"x": 10, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "_", | |||||
"x": 11, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "+", | |||||
"x": 12, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "Backspace", | |||||
"x": 13, | |||||
"y": 0, | |||||
"w": 2 | |||||
}, | |||||
{ | |||||
"label": "Print Screen", | |||||
"x": 15, | |||||
"y": 0 | |||||
}, | |||||
{ | |||||
"label": "Tab", | |||||
"x": 0, | |||||
"y": 1, | |||||
"w": 1.5 | |||||
}, | |||||
{ | |||||
"label": "Q", | |||||
"x": 1.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "W", | |||||
"x": 2.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "E", | |||||
"x": 3.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "R", | |||||
"x": 4.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "T", | |||||
"x": 5.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "Y", | |||||
"x": 6.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "U", | |||||
"x": 7.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "I", | |||||
"x": 8.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "O", | |||||
"x": 9.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "P", | |||||
"x": 10.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "{", | |||||
"x": 11.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "}", | |||||
"x": 12.5, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "Enter", | |||||
"x": 13.75, | |||||
"y": 1, | |||||
"w": 1.25, | |||||
"h": 2 | |||||
}, | |||||
{ | |||||
"label": "Page Up", | |||||
"x": 15, | |||||
"y": 1 | |||||
}, | |||||
{ | |||||
"label": "Caps Lock", | |||||
"x": 0, | |||||
"y": 2, | |||||
"w": 1.75 | |||||
}, | |||||
{ | |||||
"label": "A", | |||||
"x": 1.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "S", | |||||
"x": 2.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "D", | |||||
"x": 3.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "F", | |||||
"x": 4.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "G", | |||||
"x": 5.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "H", | |||||
"x": 6.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "J", | |||||
"x": 7.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "K", | |||||
"x": 8.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "L", | |||||
"x": 9.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": ":", | |||||
"x": 10.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "\"", | |||||
"x": 11.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "|", | |||||
"x": 12.75, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "Page Down", | |||||
"x": 15, | |||||
"y": 2 | |||||
}, | |||||
{ | |||||
"label": "Shift", | |||||
"x": 0, | |||||
"y": 3, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label":"Win", | |||||
"x": 1.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "Z", | |||||
"x": 2.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "X", | |||||
"x": 3.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "C", | |||||
"x": 4.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "V", | |||||
"x": 5.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "B", | |||||
"x": 6.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "N", | |||||
"x": 7.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "M", | |||||
"x": 8.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "<", | |||||
"x": 9.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": ">", | |||||
"x": 10.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "?", | |||||
"x": 11.25, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "Shift", | |||||
"x": 12.25, | |||||
"y": 3, | |||||
"w": 1.75 | |||||
}, | |||||
{ | |||||
"label": "Up", | |||||
"x": 14, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "End", | |||||
"x": 15, | |||||
"y": 3 | |||||
}, | |||||
{ | |||||
"label": "Ctrl", | |||||
"x": 0, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Win", | |||||
"x": 1.25, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Alt", | |||||
"x": 2.5, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"x": 3.75, | |||||
"y": 4, | |||||
"w": 6.25 | |||||
}, | |||||
{ | |||||
"label": "Alt", | |||||
"x": 10, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Win", | |||||
"x": 11.25, | |||||
"y": 4, | |||||
"w": 1.25 | |||||
}, | |||||
{ | |||||
"label": "Left", | |||||
"x": 13, | |||||
"y": 4 | |||||
}, | |||||
{ | |||||
"label": "Down", | |||||
"x": 14, | |||||
"y": 4 | |||||
}, | |||||
{ | |||||
"label": "Right", | |||||
"x": 15, | |||||
"y": 4 | |||||
} | |||||
] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,20 @@ | |||||
/** | |||||
* keymap.c | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_default( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, | |||||
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, | |||||
KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), | |||||
[1] = LAYOUT_default( | |||||
KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, | |||||
RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______,_______, _______, _______, _______), | |||||
}; |
@ -0,0 +1,20 @@ | |||||
/** | |||||
* keymap.c | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_default_splitspace( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, | |||||
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, | |||||
KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), | |||||
[1] = LAYOUT_default_splitspace( | |||||
KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, | |||||
RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), | |||||
}; |
@ -0,0 +1,85 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/* | |||||
* STM32F411xE memory setup. | |||||
*/ | |||||
MEMORY | |||||
{ | |||||
flash0 : org = 0x08020000, len = 512k-128k | |||||
flash1 : org = 0x00000000, len = 0 | |||||
flash2 : org = 0x00000000, len = 0 | |||||
flash3 : org = 0x00000000, len = 0 | |||||
flash4 : org = 0x00000000, len = 0 | |||||
flash5 : org = 0x00000000, len = 0 | |||||
flash6 : org = 0x00000000, len = 0 | |||||
flash7 : org = 0x00000000, len = 0 | |||||
ram0 : org = 0x20000000, len = 128k | |||||
ram1 : org = 0x00000000, len = 0 | |||||
ram2 : org = 0x00000000, len = 0 | |||||
ram3 : org = 0x00000000, len = 0 | |||||
ram4 : org = 0x00000000, len = 0 | |||||
ram5 : org = 0x00000000, len = 0 | |||||
ram6 : org = 0x00000000, len = 0 | |||||
ram7 : org = 0x00000000, len = 0 | |||||
} | |||||
/* For each data/text section two region are defined, a virtual region | |||||
and a load region (_LMA suffix).*/ | |||||
/* Flash region to be used for exception vectors.*/ | |||||
REGION_ALIAS("VECTORS_FLASH", flash0); | |||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash0); | |||||
/* Flash region to be used for constructors and destructors.*/ | |||||
REGION_ALIAS("XTORS_FLASH", flash0); | |||||
REGION_ALIAS("XTORS_FLASH_LMA", flash0); | |||||
/* Flash region to be used for code text.*/ | |||||
REGION_ALIAS("TEXT_FLASH", flash0); | |||||
REGION_ALIAS("TEXT_FLASH_LMA", flash0); | |||||
/* Flash region to be used for read only data.*/ | |||||
REGION_ALIAS("RODATA_FLASH", flash0); | |||||
REGION_ALIAS("RODATA_FLASH_LMA", flash0); | |||||
/* Flash region to be used for various.*/ | |||||
REGION_ALIAS("VARIOUS_FLASH", flash0); | |||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); | |||||
/* Flash region to be used for RAM(n) initialization data.*/ | |||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); | |||||
/* RAM region to be used for Main stack. This stack accommodates the processing | |||||
of all exceptions and interrupts.*/ | |||||
REGION_ALIAS("MAIN_STACK_RAM", ram0); | |||||
/* RAM region to be used for the process stack. This is the stack used by | |||||
the main() function.*/ | |||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0); | |||||
/* RAM region to be used for data segment.*/ | |||||
REGION_ALIAS("DATA_RAM", ram0); | |||||
REGION_ALIAS("DATA_RAM_LMA", flash0); | |||||
/* RAM region to be used for BSS segment.*/ | |||||
REGION_ALIAS("BSS_RAM", ram0); | |||||
/* RAM region to be used for the default heap.*/ | |||||
REGION_ALIAS("HEAP_RAM", ram0); | |||||
/* Generic rules inclusion.*/ | |||||
INCLUDE rules.ld |
@ -0,0 +1,166 @@ | |||||
/** | |||||
* matrix.c | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <string.h> | |||||
#include "hal.h" | |||||
#include "quantum.h" | |||||
#include "timer.h" | |||||
#include "wait.h" | |||||
#include "printf.h" | |||||
#include "matrix.h" | |||||
/** | |||||
* | |||||
* Row pins are input with internal pull-down. | |||||
* Column pins are output and strobe with high. | |||||
* Key is high or 1 when it turns on. | |||||
* | |||||
*/ | |||||
/* matrix state(1:on, 0:off) */ | |||||
static matrix_row_t matrix[MATRIX_ROWS]; | |||||
static matrix_row_t matrix_debouncing[MATRIX_COLS]; | |||||
static bool debouncing = false; | |||||
static uint16_t debouncing_time = 0; | |||||
void matrix_init(void) | |||||
{ | |||||
//debug_enable = true; | |||||
palSetLineMode(LINE_COL_1, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_2, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_3, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_4, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_5, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_6, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_7, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_8, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_9, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_10, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_11, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_12, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_13, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_14, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_COL_15, PAL_MODE_OUTPUT_PUSHPULL); | |||||
palSetLineMode(LINE_ROW_1, PAL_MODE_INPUT_PULLDOWN); | |||||
palSetLineMode(LINE_ROW_2, PAL_MODE_INPUT_PULLDOWN); | |||||
palSetLineMode(LINE_ROW_3, PAL_MODE_INPUT_PULLDOWN); | |||||
palSetLineMode(LINE_ROW_4, PAL_MODE_INPUT_PULLDOWN); | |||||
palSetLineMode(LINE_ROW_5, PAL_MODE_INPUT_PULLDOWN); | |||||
palClearLine(LINE_COL_1); | |||||
palClearLine(LINE_COL_2); | |||||
palClearLine(LINE_COL_3); | |||||
palClearLine(LINE_COL_4); | |||||
palClearLine(LINE_COL_5); | |||||
palClearLine(LINE_COL_6); | |||||
palClearLine(LINE_COL_7); | |||||
palClearLine(LINE_COL_8); | |||||
palClearLine(LINE_COL_9); | |||||
palClearLine(LINE_COL_10); | |||||
palClearLine(LINE_COL_11); | |||||
palClearLine(LINE_COL_12); | |||||
palClearLine(LINE_COL_13); | |||||
palClearLine(LINE_COL_14); | |||||
palClearLine(LINE_COL_15); | |||||
memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); | |||||
memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); | |||||
matrix_init_quantum(); | |||||
} | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
for (int col = 0; col < MATRIX_COLS; col++) { | |||||
matrix_row_t data = 0; | |||||
switch (col) { | |||||
case 0: palSetLine(LINE_COL_1); break; | |||||
case 1: palSetLine(LINE_COL_2); break; | |||||
case 2: palSetLine(LINE_COL_3); break; | |||||
case 3: palSetLine(LINE_COL_4); break; | |||||
case 4: palSetLine(LINE_COL_5); break; | |||||
case 5: palSetLine(LINE_COL_6); break; | |||||
case 6: palSetLine(LINE_COL_7); break; | |||||
case 7: palSetLine(LINE_COL_8); break; | |||||
case 8: palSetLine(LINE_COL_9); break; | |||||
case 9: palSetLine(LINE_COL_10); break; | |||||
case 10: palSetLine(LINE_COL_11); break; | |||||
case 11: palSetLine(LINE_COL_12); break; | |||||
case 12: palSetLine(LINE_COL_13); break; | |||||
case 13: palSetLine(LINE_COL_14); break; | |||||
case 14: palSetLine(LINE_COL_15); break; | |||||
} | |||||
// need wait to settle pin state | |||||
wait_us(20); | |||||
data = ( | |||||
(palReadLine(LINE_ROW_1) << 0 ) | | |||||
(palReadLine(LINE_ROW_2) << 1 ) | | |||||
(palReadLine(LINE_ROW_3) << 2 ) | | |||||
(palReadLine(LINE_ROW_4) << 3 ) | | |||||
(palReadLine(LINE_ROW_5) << 4 ) | |||||
); | |||||
switch (col) { | |||||
case 0: palClearLine(LINE_COL_1); break; | |||||
case 1: palClearLine(LINE_COL_2); break; | |||||
case 2: palClearLine(LINE_COL_3); break; | |||||
case 3: palClearLine(LINE_COL_4); break; | |||||
case 4: palClearLine(LINE_COL_5); break; | |||||
case 5: palClearLine(LINE_COL_6); break; | |||||
case 6: palClearLine(LINE_COL_7); break; | |||||
case 7: palClearLine(LINE_COL_8); break; | |||||
case 8: palClearLine(LINE_COL_9); break; | |||||
case 9: palClearLine(LINE_COL_10); break; | |||||
case 10: palClearLine(LINE_COL_11); break; | |||||
case 11: palClearLine(LINE_COL_12); break; | |||||
case 12: palClearLine(LINE_COL_13); break; | |||||
case 13: palClearLine(LINE_COL_14); break; | |||||
case 14: palClearLine(LINE_COL_15); break; | |||||
} | |||||
if (matrix_debouncing[col] != data) { | |||||
matrix_debouncing[col] = data; | |||||
debouncing = true; | |||||
debouncing_time = timer_read(); | |||||
} | |||||
} | |||||
if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCING_DELAY) { | |||||
for (int row = 0; row < MATRIX_ROWS; row++) { | |||||
matrix[row] = 0; | |||||
for (int col = 0; col < MATRIX_COLS; col++) { | |||||
matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); | |||||
} | |||||
} | |||||
debouncing = false; | |||||
} | |||||
matrix_scan_quantum(); | |||||
return 1; | |||||
} | |||||
bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1<<col)); } | |||||
matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } | |||||
void matrix_print(void) | |||||
{ | |||||
printf("\nr/c 01234567\n"); | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
printf("%X0: ", row); | |||||
matrix_row_t data = matrix_get_row(row); | |||||
for (int col = 0; col < MATRIX_COLS; col++) { | |||||
if (data & (1<<col)) | |||||
printf("1"); | |||||
else | |||||
printf("0"); | |||||
} | |||||
printf("\n"); | |||||
} | |||||
} |
@ -0,0 +1,268 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
#ifndef MCUCONF_H | |||||
#define MCUCONF_H | |||||
/* | |||||
* STM32F4xx drivers configuration. | |||||
* The following settings override the default settings present in | |||||
* the various device driver implementation headers. | |||||
* Note that the settings for each driver only have effect if the whole | |||||
* driver is enabled in halconf.h. | |||||
* | |||||
* IRQ priorities: | |||||
* 15...0 Lowest...Highest. | |||||
* | |||||
* DMA priorities: | |||||
* 0...3 Lowest...Highest. | |||||
*/ | |||||
#define STM32F4xx_MCUCONF | |||||
/* | |||||
* HAL driver system settings. | |||||
*/ | |||||
#define STM32_NO_INIT FALSE | |||||
#define STM32_HSI_ENABLED TRUE | |||||
#define STM32_LSI_ENABLED TRUE | |||||
#define STM32_HSE_ENABLED TRUE | |||||
#define STM32_LSE_ENABLED FALSE | |||||
#define STM32_CLOCK48_REQUIRED TRUE | |||||
#define STM32_SW STM32_SW_PLL | |||||
#define STM32_PLLSRC STM32_PLLSRC_HSE | |||||
#define STM32_PLLM_VALUE 8 | |||||
#define STM32_PLLN_VALUE 192 | |||||
#define STM32_PLLP_VALUE 2 | |||||
#define STM32_PLLQ_VALUE 4 | |||||
#define STM32_HPRE STM32_HPRE_DIV1 | |||||
#define STM32_PPRE1 STM32_PPRE1_DIV2 | |||||
#define STM32_PPRE2 STM32_PPRE2_DIV2 | |||||
#define STM32_RTCSEL STM32_RTCSEL_LSI | |||||
#define STM32_RTCPRE_VALUE 8 | |||||
#define STM32_MCO1SEL STM32_MCO1SEL_HSI | |||||
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 | |||||
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK | |||||
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 | |||||
#define STM32_I2SSRC STM32_I2SSRC_PLLI2S | |||||
#define STM32_PLLI2SN_VALUE 192 | |||||
#define STM32_PLLI2SR_VALUE 2 | |||||
#define STM32_PVD_ENABLE FALSE | |||||
#define STM32_PLS STM32_PLS_LEV0 | |||||
#define STM32_BKPRAM_ENABLE FALSE | |||||
/* | |||||
* ADC driver system settings. | |||||
*/ | |||||
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 | |||||
#define STM32_ADC_USE_ADC1 FALSE | |||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) | |||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||||
#define STM32_ADC_IRQ_PRIORITY 6 | |||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 | |||||
/* | |||||
* EXT driver system settings. | |||||
*/ | |||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 | |||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 | |||||
#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 | |||||
/* | |||||
* GPT driver system settings. | |||||
*/ | |||||
#define STM32_GPT_USE_TIM1 FALSE | |||||
#define STM32_GPT_USE_TIM2 FALSE | |||||
#define STM32_GPT_USE_TIM3 FALSE | |||||
#define STM32_GPT_USE_TIM4 TRUE | |||||
#define STM32_GPT_USE_TIM5 FALSE | |||||
#define STM32_GPT_USE_TIM9 FALSE | |||||
#define STM32_GPT_USE_TIM11 FALSE | |||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7 | |||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7 | |||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7 | |||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7 | |||||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7 | |||||
#define STM32_GPT_TIM9_IRQ_PRIORITY 7 | |||||
#define STM32_GPT_TIM11_IRQ_PRIORITY 7 | |||||
/* | |||||
* I2C driver system settings. | |||||
*/ | |||||
#define STM32_I2C_USE_I2C1 TRUE | |||||
#define STM32_I2C_USE_I2C2 FALSE | |||||
#define STM32_I2C_USE_I2C3 FALSE | |||||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) | |||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) | |||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) | |||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 | |||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 | |||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5 | |||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3 | |||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3 | |||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3 | |||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||||
/* | |||||
* I2S driver system settings. | |||||
*/ | |||||
#define STM32_I2S_USE_SPI2 FALSE | |||||
#define STM32_I2S_USE_SPI3 FALSE | |||||
#define STM32_I2S_SPI2_IRQ_PRIORITY 10 | |||||
#define STM32_I2S_SPI3_IRQ_PRIORITY 10 | |||||
#define STM32_I2S_SPI2_DMA_PRIORITY 1 | |||||
#define STM32_I2S_SPI3_DMA_PRIORITY 1 | |||||
#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) | |||||
#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||||
#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||||
#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||||
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") | |||||
/* | |||||
* ICU driver system settings. | |||||
*/ | |||||
#define STM32_ICU_USE_TIM1 FALSE | |||||
#define STM32_ICU_USE_TIM2 FALSE | |||||
#define STM32_ICU_USE_TIM3 FALSE | |||||
#define STM32_ICU_USE_TIM4 FALSE | |||||
#define STM32_ICU_USE_TIM5 FALSE | |||||
#define STM32_ICU_USE_TIM9 FALSE | |||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7 | |||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7 | |||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7 | |||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7 | |||||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7 | |||||
#define STM32_ICU_TIM9_IRQ_PRIORITY 7 | |||||
/* | |||||
* PWM driver system settings. | |||||
*/ | |||||
#define STM32_PWM_USE_ADVANCED FALSE | |||||
#define STM32_PWM_USE_TIM1 TRUE | |||||
#define STM32_PWM_USE_TIM2 FALSE | |||||
#define STM32_PWM_USE_TIM3 TRUE | |||||
#define STM32_PWM_USE_TIM4 FALSE | |||||
#define STM32_PWM_USE_TIM5 FALSE | |||||
#define STM32_PWM_USE_TIM9 FALSE | |||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7 | |||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7 | |||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7 | |||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7 | |||||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7 | |||||
#define STM32_PWM_TIM9_IRQ_PRIORITY 7 | |||||
/* | |||||
* SERIAL driver system settings. | |||||
*/ | |||||
#define STM32_SERIAL_USE_USART1 FALSE | |||||
#define STM32_SERIAL_USE_USART2 FALSE | |||||
#define STM32_SERIAL_USE_USART3 FALSE | |||||
#define STM32_SERIAL_USE_USART6 FALSE | |||||
#define STM32_SERIAL_USART1_PRIORITY 12 | |||||
#define STM32_SERIAL_USART2_PRIORITY 12 | |||||
#define STM32_SERIAL_USART3_PRIORITY 12 | |||||
#define STM32_SERIAL_USART6_PRIORITY 12 | |||||
/* | |||||
* SPI driver system settings. | |||||
*/ | |||||
#define STM32_SPI_USE_SPI1 TRUE | |||||
#define STM32_SPI_USE_SPI2 FALSE | |||||
#define STM32_SPI_USE_SPI3 FALSE | |||||
#define STM32_SPI_USE_SPI4 FALSE | |||||
#define STM32_SPI_USE_SPI5 FALSE | |||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) | |||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) | |||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) | |||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) | |||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||||
#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) | |||||
#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) | |||||
#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) | |||||
#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) | |||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI4_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI5_DMA_PRIORITY 1 | |||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_SPI4_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_SPI5_IRQ_PRIORITY 10 | |||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||||
/* | |||||
* ST driver system settings. | |||||
*/ | |||||
#define STM32_ST_IRQ_PRIORITY 8 | |||||
#define STM32_ST_USE_TIMER 2 | |||||
/* | |||||
* UART driver system settings. | |||||
*/ | |||||
#define STM32_UART_USE_USART1 FALSE | |||||
#define STM32_UART_USE_USART2 FALSE | |||||
#define STM32_UART_USE_USART3 FALSE | |||||
#define STM32_UART_USE_USART6 FALSE | |||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) | |||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) | |||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) | |||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) | |||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) | |||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) | |||||
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) | |||||
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) | |||||
#define STM32_UART_USART1_IRQ_PRIORITY 12 | |||||
#define STM32_UART_USART2_IRQ_PRIORITY 12 | |||||
#define STM32_UART_USART3_IRQ_PRIORITY 12 | |||||
#define STM32_UART_USART6_IRQ_PRIORITY 12 | |||||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||||
#define STM32_UART_USART3_DMA_PRIORITY 0 | |||||
#define STM32_UART_USART6_DMA_PRIORITY 0 | |||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||||
/* | |||||
* USB driver system settings. | |||||
*/ | |||||
#define STM32_USB_USE_OTG1 TRUE | |||||
#define STM32_USB_OTG1_IRQ_PRIORITY 14 | |||||
#define STM32_USB_OTG1_RX_FIFO_SIZE 512 | |||||
#define STM32_USB_OTG_THREAD_PRIO LOWPRIO | |||||
#define STM32_USB_OTG_THREAD_STACK_SIZE 128 | |||||
#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 | |||||
/* | |||||
* WDG driver system settings. | |||||
*/ | |||||
#define STM32_WDG_USE_IWDG FALSE | |||||
#endif /* MCUCONF_H */ |
@ -0,0 +1,243 @@ | |||||
/** | |||||
* noah.c | |||||
*/ | |||||
#include "noah.h" | |||||
#ifdef RGBLIGHT_ENABLE | |||||
#include <string.h> | |||||
#include "rgblight.h" | |||||
#include "ws2812_f4.h" | |||||
extern rgblight_config_t rgblight_config; | |||||
// led 0 for caps lock, led 1 for scroll lock, led 3 for num lock | |||||
// led 4 for layer 1, led 5 for layer 2, led 6 for layer 3, led 7 for layer 4 | |||||
#if RGBLED_NUM < 7 | |||||
#error "MUST set the RGBLED_NUM bigger than 7" | |||||
#endif | |||||
LED_TYPE noah_leds[RGBLED_NUM]; | |||||
static bool noah_led_mode = false; | |||||
void rgblight_set(void) { | |||||
memset(&noah_leds[0], 0, sizeof(noah_leds)); | |||||
if (!rgblight_config.enable) { | |||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||||
led[i].r = 0; | |||||
led[i].g = 0; | |||||
led[i].b = 0; | |||||
} | |||||
} | |||||
if (noah_led_mode) { | |||||
uint8_t ind_led = host_keyboard_leds(); | |||||
if (IS_LED_ON(ind_led, USB_LED_CAPS_LOCK)) { | |||||
noah_leds[0] = led[0]; | |||||
} | |||||
if (IS_LED_ON(ind_led, USB_LED_SCROLL_LOCK)) { | |||||
noah_leds[1] = led[1]; | |||||
} | |||||
if (IS_LED_ON(ind_led, USB_LED_NUM_LOCK)) { | |||||
noah_leds[2] = led[2]; | |||||
} | |||||
for (int32_t i = 0; i < 4; i++) { | |||||
if(layer_state_is(i+1)) { | |||||
noah_leds[i + 3] = led[i + 3]; | |||||
} | |||||
} | |||||
} else { | |||||
memcpy(&noah_leds[0], &led[0], sizeof(noah_leds)); | |||||
} | |||||
ws2812_setleds(noah_leds, RGBLED_NUM); | |||||
} | |||||
#endif | |||||
void matrix_scan_kb(void) { matrix_scan_user(); } | |||||
void matrix_init_kb(void) { | |||||
matrix_init_user(); | |||||
} | |||||
__attribute__((weak)) | |||||
void matrix_init_user(void) { | |||||
#ifdef RGBLIGHT_ENABLE | |||||
ws2812_init(); | |||||
rgblight_enable(); | |||||
#endif | |||||
#ifdef RGB_MATRIX_ENABLE | |||||
rgb_matrix_disable(); | |||||
#endif | |||||
} | |||||
__attribute__((weak)) | |||||
void matrix_scan_user(void) { | |||||
#ifdef RGBLIGHT_ENABLE | |||||
rgblight_task(); | |||||
#endif | |||||
} | |||||
#ifdef RGB_MATRIX_ENABLE | |||||
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { | |||||
/* Refer to IS31 manual for these locations | |||||
* driver | |||||
* | R location | |||||
* | | G location | |||||
* | | | B location | |||||
* | | | | */ | |||||
// left CB | |||||
{0, C1_9, C3_10, C4_10}, | |||||
{0, C1_10, C2_10, C4_11}, | |||||
{0, C1_11, C2_11, C3_11}, | |||||
{0, C1_12, C2_12, C3_12}, | |||||
{0, C1_13, C2_13, C3_13}, | |||||
{0, C1_14, C2_14, C3_14}, | |||||
{0, C1_15, C2_15, C3_15}, | |||||
{0, C1_16, C2_16, C3_16}, | |||||
{0, C5_9, C4_9, C6_9}, | |||||
{0, C5_16, C4_16, C6_16}, | |||||
{0, C9_9, C8_9, C7_9}, | |||||
{0, C9_10, C8_10, C7_10}, | |||||
{0, C9_11, C8_11, C7_11}, | |||||
{0, C9_12, C8_12, C7_12}, | |||||
{0, C9_13, C8_13, C7_13}, | |||||
{0, C9_14, C8_14, C7_14}, | |||||
{0, C9_15, C8_15, C6_14}, | |||||
{0, C9_16, C7_15, C6_15}, | |||||
// left CA | |||||
{0, C1_1, C3_2, C4_2}, | |||||
{0, C1_2, C2_2, C4_3}, | |||||
{0, C1_3, C2_3, C3_3}, | |||||
{0, C1_4, C2_4, C3_4}, | |||||
{0, C1_5, C2_5, C3_5}, | |||||
{0, C1_6, C2_6, C3_6}, | |||||
{0, C1_7, C2_7, C3_7}, | |||||
{0, C1_8, C2_8, C3_8}, | |||||
{0, C5_1, C4_1, C6_1}, | |||||
{0, C5_8, C4_8, C6_8}, | |||||
{0, C9_1, C8_1, C7_1}, | |||||
{0, C9_2, C8_2, C7_2}, | |||||
{0, C9_3, C8_3, C7_3}, | |||||
{0, C9_4, C8_4, C7_4}, | |||||
{0, C9_5, C8_5, C7_5}, | |||||
{0, C9_6, C8_6, C7_6}, | |||||
{0, C9_7, C8_7, C6_6}, | |||||
{0, C9_8, C7_7, C6_7}, | |||||
// right CA | |||||
{1, C1_1, C3_2, C4_2}, | |||||
{1, C1_2, C2_2, C4_3}, | |||||
{1, C1_3, C2_3, C3_3}, | |||||
{1, C1_4, C2_4, C3_4}, | |||||
{1, C1_5, C2_5, C3_5}, | |||||
{1, C1_6, C2_6, C3_6}, | |||||
{1, C1_7, C2_7, C3_7}, | |||||
{1, C1_8, C2_8, C3_8}, | |||||
{1, C5_1, C4_1, C6_1}, | |||||
{1, C5_8, C4_8, C6_8}, | |||||
{1, C9_1, C8_1, C7_1}, | |||||
{1, C9_2, C8_2, C7_2}, | |||||
{1, C9_3, C8_3, C7_3}, | |||||
{1, C9_4, C8_4, C7_4}, | |||||
{1, C9_5, C8_5, C7_5}, | |||||
{1, C9_6, C8_6, C7_6}, | |||||
{1, C9_7, C8_7, C6_6}, | |||||
{1, C9_8, C7_7, C6_7}, | |||||
// right CB | |||||
{1, C1_9, C3_10, C4_10}, | |||||
{1, C1_10, C2_10, C4_11}, | |||||
{1, C1_11, C2_11, C3_11}, | |||||
{1, C1_12, C2_12, C3_12}, | |||||
{1, C1_13, C2_13, C3_13}, | |||||
{1, C1_14, C2_14, C3_14}, | |||||
{1, C1_15, C2_15, C3_15}, | |||||
{1, C1_16, C2_16, C3_16}, | |||||
{1, C5_9, C4_9, C6_9}, | |||||
{1, C5_16, C4_16, C6_16}, | |||||
{1, C9_9, C8_9, C7_9}, | |||||
{1, C9_10, C8_10, C7_10}, | |||||
{1, C9_11, C8_11, C7_11}, | |||||
{1, C9_12, C8_12, C7_12}, | |||||
{1, C9_13, C8_13, C7_13}, | |||||
{1, C9_14, C8_14, C7_14}, | |||||
{1, C9_15, C8_15, C6_14}, | |||||
{1, C9_16, C7_15, C6_15}, | |||||
}; | |||||
led_config_t g_led_config = { | |||||
{ | |||||
{ 1, 2, 3, 4, 5, 6, 7, 36, 37, 38, 39, 40, NO_LED, 41}, | |||||
{ 0, 8, 10, 11, 12, 13, 14, 44, 46, 47, 48, 49, 50, 51}, | |||||
{ 30, 18, 26, 9, 19, 15, 16, 17, 55, 56, 57, 58, 59, 60}, | |||||
{ 29, 31, 32, 33, 20, 21, 23, 22, 54, 62, 64, 65, 66, 63}, | |||||
{ 34, 35, 27, 25, 67, 68, 69, 70, 71, 61, 53, 45, 42, 43}, | |||||
}, | |||||
{ | |||||
{ 0, 16},{ 0, 0},{ 15, 0},{ 30, 0},{ 45, 0},{ 60, 0},{ 75, 0},{ 90, 0}, | |||||
{ 20, 16},{ 42, 32}, | |||||
{ 45, 16},{ 50, 16},{ 65, 16},{ 80, 16},{ 95, 16},{ 70, 32},{ 84, 32},{ 98, 32}, | |||||
{ 14, 32},{ 56, 32},{ 50, 48},{ 80, 48},{110, 48},{ 95, 48},{100, 64},{112, 64}, | |||||
{ 42, 32},{ 38, 64}, | |||||
{ 0, 32},{ 10, 48},{ 0, 48},{ 20, 48},{ 35, 48},{ 65, 48},{ 0, 64},{ 19, 64}, | |||||
{105, 0},{120, 0},{135, 0},{150, 0},{165, 0},{180, 0},{202, 0},{224, 0}, | |||||
{110, 16},{224, 16}, | |||||
{125, 16},{140, 16},{155, 16},{172, 16},{187, 16},{202, 16},{210, 32},{224, 32}, | |||||
{125, 48},{112, 32},{126, 32},{140, 32},{154, 32},{168, 32},{182, 32},{224, 48}, | |||||
{140, 48},{200, 48}, | |||||
{155, 48},{170, 48},{185, 48},{150, 64},{173, 64},{195, 64},{210, 64},{224, 64} | |||||
}, | |||||
{ | |||||
1, 1, 4, 4, 4, 4, 4, 4, | |||||
4, 4, | |||||
4, 4, 4, 4, 4, 4, 4, 4, | |||||
4, 4, 4, 4, 4, 4, 4, 4, | |||||
4, 4, | |||||
1, 1, 1, 4, 4, 4, 1, 1, | |||||
4, 4, 4, 4, 4, 4, 1, 1, | |||||
4, 1, | |||||
4, 4, 4, 4, 4, 4, 4, 1, | |||||
4, 4, 4, 4, 4, 4, 4, 1, | |||||
4, 4, | |||||
4, 4, 4, 1, 1, 1, 1, 1, | |||||
} | |||||
}; | |||||
#endif | |||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||||
if (record->event.pressed) { | |||||
switch(keycode) { | |||||
#ifdef RGBLIGHT_ENABLE | |||||
case KC_F24: // switch the led mode on or off | |||||
noah_led_mode = !noah_led_mode; | |||||
return false; | |||||
#ifdef RGB_MATRIX_ENABLE | |||||
case KC_F13: // toggle rgb matrix | |||||
rgb_matrix_toggle(); | |||||
return false; | |||||
case KC_F14: | |||||
rgb_matrix_step(); | |||||
return false; | |||||
#endif | |||||
#endif | |||||
default: | |||||
break; | |||||
} | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,91 @@ | |||||
/** | |||||
* noah.h | |||||
*/ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
#define LAYOUT_default( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ | |||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ | |||||
k40, k41, k42, k43, k44, k45, k46, k47, k48) \ | |||||
{ \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ | |||||
{k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ | |||||
{k40, k41, k42,KC_NO,k43,KC_NO,k44, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ | |||||
} | |||||
#define LAYOUT_wkl( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ | |||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ | |||||
k40, k41, k42, k43, k45, k46, k47, k48 \ | |||||
) { \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ | |||||
{k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ | |||||
{k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ | |||||
} | |||||
#define LAYOUT_iso( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ | |||||
k40, k41, k42, k43, k45, k46, k47, k48 \ | |||||
) { \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \ | |||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ | |||||
{k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \ | |||||
} | |||||
#define LAYOUT_default_splitspace( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ | |||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ | |||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a \ | |||||
) { \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ | |||||
{k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ | |||||
{k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \ | |||||
} | |||||
#define LAYOUT_wkl_splitspace( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ | |||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ | |||||
k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a \ | |||||
) { \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \ | |||||
{k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ | |||||
{k40, k41, k42, k43, k45,KC_NO,k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \ | |||||
} | |||||
#define LAYOUT_iso_splitspace( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ | |||||
k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a \ | |||||
) { \ | |||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ | |||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \ | |||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \ | |||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \ | |||||
{k40, k41, k42, k43, k45,KC_NO,k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \ | |||||
} |
@ -0,0 +1,19 @@ | |||||
# NOAH 65 keyboard | |||||
![NOAH](https://raw.githubusercontent.com/yulei/qmk_webusb_tool/master/public/noah.jpg) | |||||
This was the first 65% keyboard made by the Matrix team, it had the following features: | |||||
- per key rgb led | |||||
- 7 RGB led for caps, scroll , num lock and layer state indicator, or just play light animation effects | |||||
- ansi and iso layouts, and split spacebar supported | |||||
- pre-programmed bootloader which emulated usb stick to ease firmware updating | |||||
Keyboard Maintainer: [astro](https://github.com/yulei) | |||||
Hardware Supported: Matrix NOAH keyboard | |||||
Hardware Availability: [NOAH Keybaord](https://geekhack.org/index.php?topic=102300.0) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make matrix/noah:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,57 @@ | |||||
## chip/board settings | |||||
# - the next two should match the directories in | |||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) | |||||
MCU_FAMILY = STM32 | |||||
MCU_SERIES = STM32F4xx | |||||
# Linker script to use | |||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ | |||||
# or <this_dir>/ld/ | |||||
MCU_LDSCRIPT = noah_boot | |||||
# Startup code to use | |||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ | |||||
MCU_STARTUP = stm32f4xx | |||||
# Board: it should exist either in <chibios>/os/hal/boards/ | |||||
# or <this_dir>/boards | |||||
BOARD = noah_bd | |||||
# Cortex version | |||||
MCU = cortex-m4 | |||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 | |||||
ARMV = 7 | |||||
USE_FPU = yes | |||||
# Vector table for application | |||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ | |||||
OPT_DEFS = | |||||
# Options to pass to dfu-util when flashing | |||||
#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave | |||||
#DFU_SUFFIX_ARGS = -p DF11 -v 0483 | |||||
# Build Options | |||||
# comment out to disable the options. | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration | |||||
MOUSEKEY_ENABLE = no # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = no # Console for debug | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
NKRO_ENABLE = no # USB Nkey Rollover | |||||
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in | |||||
CUSTOM_MATRIX = yes | |||||
RGB_MATRIX_ENABLE = yes | |||||
RGBLIGHT_ENABLE = yes | |||||
RGBLIGHT_CUSTOM_DRIVER = yes | |||||
# project specific files | |||||
SRC += \ | |||||
matrix.c \ | |||||
ws2812_f4.c \ | |||||
eeprom_f4.c |
@ -0,0 +1,272 @@ | |||||
/** | |||||
* @file ws2812.c | |||||
* @author Austin Glaser <austin.glaser@gmail.com>, Joerg Wangemann <joerg.wangemann@gmail.com> | |||||
* @brief WS2812 LED driver | |||||
* | |||||
* Copyright (C) 2016 Austin Glaser, 2017 Joerg Wangemann | |||||
* | |||||
* This software may be modified and distributed under the terms | |||||
* of the MIT license. See the LICENSE file for details. | |||||
* | |||||
* @todo Put in names and descriptions of variables which need to be defined to use this file | |||||
* | |||||
* @addtogroup WS2812 | |||||
* @{ | |||||
*/ | |||||
/* --- PRIVATE DEPENDENCIES ------------------------------------------------- */ | |||||
// This Driver | |||||
#include "ws2812_f4.h" | |||||
// Standard | |||||
#include <stdint.h> | |||||
// ChibiOS | |||||
#include "ch.h" | |||||
#include "hal.h" | |||||
#include "wait.h" | |||||
// Application | |||||
//#include "board.h" | |||||
// TODO: Add these #define's to the headers of your project. | |||||
// Pin, timer and dma are all connected, check them all if you change one. | |||||
// Tested with STM32F4, working at 144 or 168 MHz. | |||||
//#define WS2812_LED_N 2 // Number of LEDs | |||||
//#define PORT_WS2812 GPIOB | |||||
//#define PIN_WS2812 9 | |||||
//#define WS2812_TIM_N 4 // timer, 1-11 | |||||
//#define WS2812_TIM_CH 3 // timer channel, 0-3 | |||||
//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection) | |||||
//#define WS2812_DMA_CHANNEL 6 // DMA channel for TIMx_UP | |||||
// The WS2812 expects 5V signal level (or at least 0.7 * VDD). Sometimes it works | |||||
// with a 3V signal level, otherwise the easiest way to get the signal level to 5V | |||||
// is to add an external pullup resistor from the DI pin to 5V (10k will do) and | |||||
// configure the pin as open drain. | |||||
// (An SMD resistor is easily solders on the connections of a light strip) | |||||
// Uncomment the next line if an external pullup resistor is used. | |||||
//#define WS2812_EXTERNAL_PULLUP | |||||
/* --- CONFIGURATION CHECK -------------------------------------------------- */ | |||||
#if !defined(WS2812_LED_N) | |||||
#error WS2812 LED chain length not specified | |||||
#elif WS2812_LED_N <= 0 | |||||
#error WS2812 LED chain length set to invalid value | |||||
#endif | |||||
#if !defined(WS2812_TIM_N) | |||||
#error WS2812 timer not specified | |||||
#endif | |||||
#if defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32F7XX) | |||||
#if WS2812_TIM_N <= 2 | |||||
#define WS2812_AF 1 | |||||
#elif WS2812_TIM_N <= 5 | |||||
#define WS2812_AF 2 | |||||
#elif WS2812_TIM_N <= 11 | |||||
#define WS2812_AF 3 | |||||
#endif | |||||
#elif !defined(WS2812_AF) | |||||
#error WS2812_AF timer alternate function not specified | |||||
#endif | |||||
#if !defined(WS2812_TIM_CH) | |||||
#error WS2812 timer channel not specified | |||||
#elif WS2812_TIM_CH >= 4 | |||||
#error WS2812 timer channel set to invalid value | |||||
#endif | |||||
/* --- PRIVATE CONSTANTS ---------------------------------------------------- */ | |||||
#define WS2812_PWM_FREQUENCY (STM32_SYSCLK/2) /**< Clock frequency of PWM, must be valid with respect to system clock! */ | |||||
#define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY/800000) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */ | |||||
/** | |||||
* @brief Number of bit-periods to hold the data line low at the end of a frame | |||||
* | |||||
* The reset period for each frame must be at least 50 uS; so we add in 50 bit-times | |||||
* of zeroes at the end. (50 bits)*(1.25 uS/bit) = 62.5 uS, which gives us some | |||||
* slack in the timing requirements | |||||
*/ | |||||
#define WS2812_RESET_BIT_N (50) | |||||
#define WS2812_COLOR_BIT_N (WS2812_LED_N*24) /**< Number of data bits */ | |||||
#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */ | |||||
/** | |||||
* @brief High period for a zero, in ticks | |||||
* | |||||
* Per the datasheet: | |||||
* WS2812: | |||||
* - T0H: 200 nS to 500 nS, inclusive | |||||
* - T0L: 650 nS to 950 nS, inclusive | |||||
* WS2812B: | |||||
* - T0H: 200 nS to 500 nS, inclusive | |||||
* - T0L: 750 nS to 1050 nS, inclusive | |||||
* | |||||
* The duty cycle is calculated for a high period of 350 nS. | |||||
*/ | |||||
#define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY/(1000000000/450)) | |||||
/** | |||||
* @brief High period for a one, in ticks | |||||
* | |||||
* Per the datasheet: | |||||
* WS2812: | |||||
* - T1H: 550 nS to 850 nS, inclusive | |||||
* - T1L: 450 nS to 750 nS, inclusive | |||||
* WS2812B: | |||||
* - T1H: 750 nS to 1050 nS, inclusive | |||||
* - T1L: 200 nS to 500 nS, inclusive | |||||
* | |||||
* The duty cycle is calculated for a high period of 800 nS. | |||||
* This is in the middle of the specifications of the WS2812 and WS2812B. | |||||
*/ | |||||
#define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY/(1000000000/900)) | |||||
/* --- PRIVATE MACROS ------------------------------------------------------- */ | |||||
/** | |||||
* @brief Generates a reference to a numbered PWM driver | |||||
* | |||||
* @param[in] n: The driver (timer) number | |||||
* | |||||
* @return A reference to the driver | |||||
*/ | |||||
#define PWMD(n) CONCAT_EXPANDED_SYMBOLS(PWMD, n) | |||||
#define WS2812_PWMD PWMD(WS2812_TIM_N) /**< The PWM driver to use for the LED chain */ | |||||
/** | |||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given bit | |||||
* | |||||
* @param[in] led: The led index [0, @ref WS2812_LED_N) | |||||
* @param[in] byte: The byte number [0, 2] | |||||
* @param[in] bit: The bit number [0, 7] | |||||
* | |||||
* @return The bit index | |||||
*/ | |||||
#define WS2812_BIT(led, byte, bit) (24*(led) + 8*(byte) + (7 - (bit))) | |||||
/** | |||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit | |||||
* | |||||
* @note The red byte is the middle byte in the color packet | |||||
* | |||||
* @param[in] led: The led index [0, @ref WS2812_LED_N) | |||||
* @param[in] bit: The bit number [0, 7] | |||||
* | |||||
* @return The bit index | |||||
*/ | |||||
#define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit)) | |||||
/** | |||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit | |||||
* | |||||
* @note The green byte is the first byte in the color packet | |||||
* | |||||
* @param[in] led: The led index [0, @ref WS2812_LED_N) | |||||
* @param[in] bit: The bit number [0, 7] | |||||
* | |||||
* @return The bit index | |||||
*/ | |||||
#define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit)) | |||||
/** | |||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit | |||||
* | |||||
* @note The blue byte is the last byte in the color packet | |||||
* | |||||
* @param[in] led: The led index [0, @ref WS2812_LED_N) | |||||
* @param[in] bit: The bit index [0, 7] | |||||
* | |||||
* @return The bit index | |||||
*/ | |||||
#define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit)) | |||||
/* --- PRIVATE VARIABLES ---------------------------------------------------- */ | |||||
static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */ | |||||
/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */ | |||||
/* | |||||
* Gedanke: Double-buffer type transactions: double buffer transfers using two memory pointers for | |||||
the memory (while the DMA is reading/writing from/to a buffer, the application can | |||||
write/read to/from the other buffer). | |||||
*/ | |||||
void ws2812_init(void) | |||||
{ | |||||
// Initialize led frame buffer | |||||
uint32_t i; | |||||
for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle | |||||
for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero | |||||
// Configure pin as AF output. If there's an external pull up resistor the signal level is brought to 5V using open drain mode. | |||||
#ifdef WS2812_EXTERNAL_PULLUP | |||||
palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_OPENDRAIN); | |||||
#else | |||||
palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_PUSHPULL); //PAL_MODE_STM32_ALTERNATE_PUSHPULL); | |||||
#endif | |||||
//palClearPad(PORT_WS2812, PIN_WS2812); | |||||
//wait_ms(1); | |||||
// PWM Configuration | |||||
#pragma GCC diagnostic ignored "-Woverride-init" // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config | |||||
static const PWMConfig ws2812_pwm_config = { | |||||
.frequency = WS2812_PWM_FREQUENCY, | |||||
.period = WS2812_PWM_PERIOD, //Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben | |||||
.callback = NULL, | |||||
.channels = { | |||||
[0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled | |||||
[WS2812_TIM_CH] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}, // Turn on the channel we care about | |||||
}, | |||||
.cr2 = 0, | |||||
.dier = TIM_DIER_UDE, // DMA on update event for next period | |||||
}; | |||||
#pragma GCC diagnostic pop // Restore command-line warning options | |||||
// Configure DMA | |||||
//dmaInit(); // Joe added this | |||||
dmaStreamAllocate(WS2812_DMA_STREAM, 10, NULL, NULL); | |||||
dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWMD.tim->CCR[WS2812_TIM_CH])); // Ziel ist der An-Zeit im Cap-Comp-Register | |||||
dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer); | |||||
dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N); | |||||
dmaStreamSetMode(WS2812_DMA_STREAM, | |||||
STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | | |||||
STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3)); | |||||
// M2P: Memory 2 Periph; PL: Priority Level | |||||
// Start DMA | |||||
dmaStreamEnable(WS2812_DMA_STREAM); | |||||
// Configure PWM | |||||
// NOTE: It's required that preload be enabled on the timer channel CCR register. This is currently enabled in the | |||||
// ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer, | |||||
// disable counting, enable the channel, and then make whatever configuration changes we need. | |||||
pwmStart(&WS2812_PWMD, &ws2812_pwm_config); | |||||
pwmEnableChannel(&WS2812_PWMD, WS2812_TIM_CH, 0); // Initial period is 0; output will be low until first duty cycle is DMA'd in | |||||
} | |||||
ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b) | |||||
{ | |||||
// Check for valid LED | |||||
if (led_number > WS2812_LED_N) return WS2812_LED_INVALID; | |||||
// Write color to frame buffer | |||||
for (uint32_t bit = 0; bit < 8; bit++) { | |||||
ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; | |||||
ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; | |||||
ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; | |||||
} | |||||
// Success | |||||
return WS2812_SUCCESS; | |||||
} | |||||
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) | |||||
{ | |||||
for(int i = 0; i < number_of_leds; i++) { | |||||
ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b); | |||||
} | |||||
} | |||||
/** @} addtogroup WS2812 */ |
@ -0,0 +1,102 @@ | |||||
/** | |||||
* @file ws2812.h | |||||
* @author Austin Glaser <austin.glaser@gmail.com> | |||||
* @brief Interface to WS2812 LED driver | |||||
* | |||||
* Copyright (C) 2016 Austin Glaser | |||||
* | |||||
* This software may be modified and distributed under the terms | |||||
* of the MIT license. See the LICENSE file for details. | |||||
* | |||||
* @todo Put in names and descriptions of variables which need to be defined to use this file | |||||
*/ | |||||
#ifndef WS2812_H_ | |||||
#define WS2812_H_ | |||||
/** | |||||
* @defgroup WS2812 WS2812 Driver | |||||
* @{ | |||||
* | |||||
* @brief DMA-based WS2812 LED driver | |||||
* | |||||
* A driver for WS2812 LEDs | |||||
*/ | |||||
/* --- PUBLIC DEPENDENCIES -------------------------------------------------- */ | |||||
// Standard | |||||
#include <stdint.h> | |||||
#include "color.h" | |||||
/* --- PUBLIC MACROS -------------------------------------------------------- */ | |||||
/** | |||||
* @brief Concatenates two symbols s1 and s2 exactly, without expanding either | |||||
* | |||||
* @param[in] s1: The first symbol to concatenate | |||||
* @param[in] s2: The second symbol to concatenate | |||||
* | |||||
* @return A single symbol containing s1 and s2 concatenated without expansion | |||||
*/ | |||||
#define CONCAT_SYMBOLS(s1, s2) s1##s2 | |||||
/** | |||||
* @brief Concatenate the symbols s1 and s2, expanding both of them | |||||
* | |||||
* This is important because simply applying s1##s2 doesn't expand them if they're | |||||
* preprocessor tokens themselves | |||||
* | |||||
* @param[in] s1: The first symbol to concatenate | |||||
* @param[in] s2: The second symbol to concatenate | |||||
* | |||||
* @return A single symbol containing s1 expanded followed by s2 expanded | |||||
*/ | |||||
#define CONCAT_EXPANDED_SYMBOLS(s1, s2) CONCAT_SYMBOLS(s1, s2) | |||||
/* --- PUBLIC CONSTANTS ----------------------------------------------------- */ | |||||
/** | |||||
* @brief Return codes from ws2812 interface functions | |||||
*/ | |||||
typedef enum { | |||||
WS2812_SUCCESS = 0x00, /**< Operation completeed successfully */ | |||||
WS2812_LED_INVALID, /**< Attempted to index an invalid LED (@ref WS2812_N_LEDS) */ | |||||
MAX_WS2812_ERR, /**< Total number of possible error codes */ | |||||
WS2812_ERR_INVALID /**< Invalid error value */ | |||||
} ws2812_err_t; | |||||
/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */ | |||||
/** | |||||
* @brief Initialize the driver | |||||
* | |||||
* After this function is called, all necessary background tasks will be started. | |||||
* The frame is initially dark. | |||||
*/ | |||||
void ws2812_init(void); | |||||
/** | |||||
* @brief Write the value of a single LED in the chain | |||||
* | |||||
* The color value is written to a frame buffer, and will not | |||||
* be updated until the next frame is written. Frames are written | |||||
* at the maximum possible speed -- the longest latency between a | |||||
* call to this function and the value being displayed is | |||||
* 1.25uS*(24*@ref WS2812_LED_N + 50) | |||||
* | |||||
* @param[in] led_number: The index of the LED to be written. Must be strictly less than | |||||
* @ref WS2812_N_LEDS | |||||
* @param[in] r: The red level of the LED | |||||
* @param[in] g: The green level of the LED | |||||
* @param[in] b: The blue level of the LED | |||||
* | |||||
* @retval WS2812_SUCCESS: The write was successful | |||||
* @retval WS2812_LED_INVALID: The write was to an invalid LED index | |||||
*/ | |||||
ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b); | |||||
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds); | |||||
/** @} defgroup WS2812 */ | |||||
#endif // ifndef WS2812_H_ |