Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Pablo Martínez <58857054+elpekenin@users.noreply.github.com>pull/20460/head
@ -0,0 +1,13 @@ | |||
// Copyright 2022 Markus Knutsson (@TweetyDaBird) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#pragma once | |||
// Options not yet fully implemented in info.json | |||
#define RGBLIGHT_LIMIT_VAL 175 | |||
#define RGBLIGHT_DEFAULT_VAL ( RGBLIGHT_LIMIT_VAL / 2 ) | |||
#define SPLIT_HAND_PIN B5 | |||
#define SPLIT_LAYER_STATE_ENABLE | |||
#define SPLIT_LED_STATE_ENABLE | |||
#define SPLIT_OLED_ENABLE |
@ -0,0 +1,3 @@ | |||
{ | |||
"bootloader": "atmel-dfu" | |||
} |
@ -0,0 +1 @@ | |||
# This file intentionally left blank |
@ -0,0 +1,136 @@ | |||
{ | |||
"manufacturer": "Tweetys Wild Thinking", | |||
"keyboard_name": "Lotus 58 Glow (QMK)", | |||
"maintainer": "TweetyDaBird", | |||
"bootloader_instructions": "Short marked pads on PCB, or hold top-outer key when plugging in each hand.", | |||
"build": { | |||
"lto": true | |||
}, | |||
"diode_direction": "COL2ROW", | |||
"encoder": { | |||
"rotary": [ | |||
{ "pin_a": "F5", "pin_b": "F4", "resolution": 2 } | |||
] | |||
}, | |||
"features": { | |||
"bootmagic": true, | |||
"command": false, | |||
"console": false, | |||
"extrakey": true, | |||
"mousekey": true, | |||
"nkro": true, | |||
"oled": true, | |||
"encoder": true, | |||
"rgblight": true, | |||
"split": true, | |||
"tri_layer": true | |||
}, | |||
"matrix_pins": { | |||
"cols": ["B1", "B2", "B3", "B6", "F7", "F6"], | |||
"rows": ["D4", "C6", "D7", "E6", "B4"] | |||
}, | |||
"pin_compatible": "promicro", | |||
"processor": "atmega32u4", | |||
"rgblight": { | |||
"led_count": 70, | |||
"pin": "D3", | |||
"split": true, | |||
"split_count": [35, 35], | |||
"sleep": true | |||
}, | |||
"split": { | |||
"bootmagic": { | |||
"matrix": [5, 0] | |||
}, | |||
"enabled": true, | |||
"encoder": { | |||
"right": { | |||
"rotary": [ | |||
{ "pin_a": "F4", "pin_b": "F5", "resolution": 2 } | |||
] | |||
} | |||
}, | |||
"soft_serial_pin": "D2", | |||
"transport": { | |||
"protocol": "serial", | |||
"sync_matrix_state": true, | |||
"sync_modifiers": true | |||
}, | |||
"usb_detect": { | |||
"enabled": true | |||
} | |||
}, | |||
"url": "https://lectronz.com/stores/tweetys-wild-thinking", | |||
"usb": { | |||
"vid": "0xFEED", | |||
"pid": "0x23B0", | |||
"device_version": "1.2.3", | |||
"force_nkro": true | |||
}, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ "label": "Esc", "matrix": [0, 0], "x": 0, "y": 0.75 }, | |||
{ "label": "1", "matrix": [0, 1], "x": 1, "y": 0.5 }, | |||
{ "label": "2", "matrix": [0, 2], "x": 2, "y": 0.25 }, | |||
{ "label": "3", "matrix": [0, 3], "x": 3, "y": 0 }, | |||
{ "label": "4", "matrix": [0, 4], "x": 4, "y": 0.25 }, | |||
{ "label": "5", "matrix": [0, 5], "x": 5, "y": 0.5 }, | |||
{ "label": "Left ENC", "matrix": [4, 0], "x": 6.25, "y": 0.75 }, | |||
{ "label": "Right ENC", "matrix": [9, 0], "x": 7.75, "y": 0.75 }, | |||
{ "label": "6", "matrix": [5, 5], "x": 9, "y": 0.5 }, | |||
{ "label": "7", "matrix": [5, 4], "x": 10, "y": 0.25 }, | |||
{ "label": "8", "matrix": [5, 3], "x": 11, "y": 0 }, | |||
{ "label": "9", "matrix": [5, 2], "x": 12, "y": 0.25 }, | |||
{ "label": "0", "matrix": [5, 1], "x": 13, "y": 0.5 }, | |||
{ "label": "-", "matrix": [5, 0], "x": 14, "y": 0.75 }, | |||
{ "label": "Tab", "matrix": [1, 0], "x": 0, "y": 1.75 }, | |||
{ "label": "Q", "matrix": [1, 1], "x": 1, "y": 1.5 }, | |||
{ "label": "W", "matrix": [1, 2], "x": 2, "y": 1.25 }, | |||
{ "label": "E", "matrix": [1, 3], "x": 3, "y": 1 }, | |||
{ "label": "R", "matrix": [1, 4], "x": 4, "y": 1.25 }, | |||
{ "label": "T", "matrix": [1, 5], "x": 5, "y": 1.5 }, | |||
{ "label": "Y", "matrix": [6, 5], "x": 9, "y": 1.5 }, | |||
{ "label": "U", "matrix": [6, 4], "x": 10, "y": 1.25 }, | |||
{ "label": "I", "matrix": [6, 3], "x": 11, "y": 1 }, | |||
{ "label": "O", "matrix": [6, 2], "x": 12, "y": 1.25 }, | |||
{ "label": "P", "matrix": [6, 1], "x": 13, "y": 1.5 }, | |||
{ "label": "{", "matrix": [6, 0], "x": 14, "y": 1.75 }, | |||
{ "label": "Caps Lock", "matrix": [2, 0], "x": 0, "y": 2.75 }, | |||
{ "label": "A", "matrix": [2, 1], "x": 1, "y": 2.5 }, | |||
{ "label": "S", "matrix": [2, 2], "x": 2, "y": 2.25 }, | |||
{ "label": "D", "matrix": [2, 3], "x": 3, "y": 2 }, | |||
{ "label": "F", "matrix": [2, 4], "x": 4, "y": 2.25 }, | |||
{ "label": "G", "matrix": [2, 5], "x": 5, "y": 2.5 }, | |||
{ "label": "H", "matrix": [7, 5], "x": 9, "y": 2.5 }, | |||
{ "label": "J", "matrix": [7, 4], "x": 10, "y": 2.25 }, | |||
{ "label": "K", "matrix": [7, 3], "x": 11, "y": 2 }, | |||
{ "label": "L", "matrix": [7, 2], "x": 12, "y": 2.25 }, | |||
{ "label": ":", "matrix": [7, 1], "x": 13, "y": 2.5 }, | |||
{ "label": "\"", "matrix": [7, 0], "x": 14, "y": 2.75 }, | |||
{ "label": "L_Ctrl", "matrix": [3, 0], "x": 0, "y": 3.75 }, | |||
{ "label": "Z", "matrix": [3, 1], "x": 1, "y": 3.5 }, | |||
{ "label": "X", "matrix": [3, 2], "x": 2, "y": 3.25 }, | |||
{ "label": "C", "matrix": [3, 3], "x": 3, "y": 3 }, | |||
{ "label": "V", "matrix": [3, 4], "x": 4, "y": 3.25 }, | |||
{ "label": "B", "matrix": [3, 5], "x": 5, "y": 3.5 }, | |||
{ "label": "Down", "matrix": [4, 5], "x": 6, "y": 3 }, | |||
{ "label": "Up", "matrix": [9, 5], "x": 8, "y": 3 }, | |||
{ "label": "N", "matrix": [8, 5], "x": 9, "y": 3.5 }, | |||
{ "label": "M", "matrix": [8, 4], "x": 10, "y": 3.25 }, | |||
{ "label": ",", "matrix": [8, 3], "x": 11, "y": 3 }, | |||
{ "label": ".", "matrix": [8, 2], "x": 12, "y": 3.25 }, | |||
{ "label": "?", "matrix": [8, 1], "x": 13, "y": 3.5 }, | |||
{ "label": "R_Ctrl", "matrix": [8, 0], "x": 14, "y": 3.75 }, | |||
{ "label": "Win", "matrix": [4, 1], "x": 2.5, "y": 4.25 }, | |||
{ "label": "Lower", "matrix": [4, 2], "x": 3.5, "y": 4.25 }, | |||
{ "label": "Alt", "matrix": [4, 3], "x": 4.5, "y": 4.5 }, | |||
{ "label": "Space", "matrix": [4, 4], "x": 6, "y": 4.25, "h": 1.25 }, | |||
{ "label": "Enter", "matrix": [9, 4], "x": 8, "y": 4.25, "h": 1.25 }, | |||
{ "label": "AltGr", "matrix": [9, 3], "x": 9.5, "y": 4.5 }, | |||
{ "label": "Raise", "matrix": [9, 2], "x": 10.5, "y": 4.25 }, | |||
{ "label": "BckSp", "matrix": [9, 1], "x": 11.5, "y": 4.25 } | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,86 @@ | |||
// Copyright 2022 Markus Knutsson (@TweetyDaBird) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MPLY, KC_MPLY, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
LCTL_T(KC_LEFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DOWN, KC_UP, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RCTL_T(KC_RGHT), | |||
KC_LGUI, TG(2), KC_LALT, LSFT_T(KC_SPC), RSFT_T(KC_ENT), KC_RALT, TG(1), RGUI_T(KC_BSPC) | |||
), | |||
[1] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_CIRC, KC_KP_7, KC_KP_8, KC_KP_9, XXXXXXX, XXXXXXX, | |||
_______, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, KC_HASH, KC_KP_4, KC_KP_5, KC_KP_6, XXXXXXX, XXXXXXX, | |||
XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT,KC_LBRC, KC_RBRC, KC_AMPR, KC_KP_1, KC_KP_2, KC_KP_3, XXXXXXX, XXXXXXX, | |||
_______, XXXXXXX, KC_PAST, KC_PPLS, KC_PSLS, KC_EQL, _______, _______, KC_DLR, KC_KP_0, KC_PDOT, KC_COLN, KC_PMNS, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[2] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[3] = LAYOUT( | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_SAI, RGB_TOG, | |||
QK_BOOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_RMOD,RGB_SAD, RGB_M_P, | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAPS, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUI, RGB_VAI, RGB_M_B, | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUD, RGB_VAD, RGB_M_R, | |||
_______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
#if defined(ENCODER_MAP_ENABLE) | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { | |||
[0] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, | |||
[1] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, | |||
[2] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, | |||
[3] = { ENCODER_CCW_CW(KC_VOLD, KC_VOLU), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) } | |||
}; | |||
#endif | |||
#ifdef OLED_ENABLE | |||
static void print_status_narrow(void) { | |||
// Create OLED content | |||
oled_write_P(PSTR("\n"), false); | |||
oled_write_P(PSTR(""), false); | |||
oled_write_P(PSTR("Lotus -58-"), false); | |||
oled_write_P(PSTR("\n"), false); | |||
// Print current layer | |||
oled_write_P(PSTR("Layer"), false); | |||
switch (get_highest_layer(layer_state)) { | |||
case 0: | |||
oled_write_P(PSTR("-Base\n"), false); | |||
break; | |||
case 1: | |||
oled_write_P(PSTR("-Num \n"), false); | |||
break; | |||
case 2: | |||
oled_write_P(PSTR("-Func\n"), false); | |||
break; | |||
case 3: | |||
oled_write_P(PSTR("-Sys \n"), false); | |||
break; | |||
default: | |||
oled_write_P(PSTR("Undef"), false); | |||
} | |||
oled_write_P(PSTR("\n"), false); | |||
led_t led_usb_state = host_keyboard_led_state(); | |||
oled_write_ln_P(PSTR("Caps- lock"), led_usb_state.caps_lock); | |||
} | |||
bool oled_task_user(void) { | |||
// Render the OLED | |||
print_status_narrow(); | |||
return false; | |||
} | |||
#endif |
@ -0,0 +1,2 @@ | |||
ENCODER_MAP_ENABLE = yes | |||
AUTO_SHIFT_ENABLE = yes |
@ -0,0 +1,29 @@ | |||
// Copyright 2022 Markus Knutsson (@TweetyDaBird) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include "quantum.h" | |||
#ifdef OLED_ENABLE | |||
oled_rotation_t oled_init_kb(oled_rotation_t rotation) { | |||
return OLED_ROTATION_90; | |||
} | |||
void render_logo(void) { | |||
// QMK Logo | |||
static const char PROGMEM qmk_logo[] = { | |||
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, | |||
0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, | |||
0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 | |||
}; | |||
oled_write_P(qmk_logo, false); | |||
} | |||
bool oled_task_kb(void) { | |||
if (!oled_task_user()) { | |||
return false; | |||
} | |||
render_logo(); | |||
return false; | |||
} | |||
#endif |
@ -0,0 +1,2 @@ | |||
BOOTLOADER = qmk-hid | |||
BOOTLOADER_SIZE = 512 |
@ -0,0 +1,3 @@ | |||
{ | |||
"bootloader": "caterina" | |||
} |
@ -0,0 +1 @@ | |||
# This file intentionally left blank |
@ -0,0 +1,37 @@ | |||
# Lotus 58 Glow | |||
![lotus58](https://i.imgur.com/WWgpp0Sh.jpeg) | |||
* Lotus 58 Glow is a fully programmable 58-key split, ortho-columnar keyboard with a 4x6 main matrix and 4+1 thumb-keys per hand. Optional support for one OLED screen per hand/side showing information such as active layer, CapsLock/NumLock etc. as well as one Rotary Encoder per hand, with optional placement. | |||
* Keyboard Maintainer: [TweetyDaBird](https://github.com/TweetyDaBird) | |||
* Hardware Supported: *Lotus 58 Glow v1.11 - 1.2x PCB, Pro Micro or pin-compatible* | |||
* Hardware Availability: [Lectronz Store](https://lectronz.com/stores/tweetys-wild-thinking) | |||
* Hardware Design: [GitHub](https://github.com/TweetyDaBird/Lotus58) | |||
#### This keyboard firmware contains three different versions, all for the same PCB/hardware, but depending on your choice of controller/bootloader. | |||
* promicro - This uses the default Caterina bootloader. | |||
* elite_c - This uses the Atmel-DFU bootloader. | |||
* nanoBoot - A tiny 512 byte bootloader giving far more usable memory for features (can be used on both Elite C and Pro Micro). | |||
Make example for this keyboard (after setting up your build environment): | |||
make tweetydabird/lotus58/promicro:default | |||
Flashing example for this keyboard: | |||
make tweetydabird/lotus58/elite_c:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader | |||
Enter the bootloader in 3 ways: | |||
* **Bootmagic reset**: Hold down the top outer key for each hand as it is plugged in | |||
* **Physical reset**: Briefly short the marked pads on PCB | |||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if mapped (not in default keymap) |