Browse Source

Improve readme and PID codes for Atreus.

pull/1728/head
Phil Hagelberg 6 years ago
committed by Jack Humbert
parent
commit
2a02df84b6
3 changed files with 5 additions and 10 deletions
  1. +3
    -3
      keyboards/atreus/config.h
  2. +2
    -4
      keyboards/atreus/readme.md
  3. +0
    -3
      keyboards/atreus/rules.mk

+ 3
- 3
keyboards/atreus/config.h View File

@ -22,9 +22,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define VENDOR_ID 0x1209
#define PRODUCT_ID 0xA1E5
#define DEVICE_VER 0x0008
#define MANUFACTURER Technomancy
#define PRODUCT Atreus
#define DESCRIPTION q.m.k. keyboard firmware for Atreus


+ 2
- 4
keyboards/atreus/readme.md View File

@ -3,9 +3,7 @@ Atreus
A small mechanical keyboard that is based around the shape of the human hand.
These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, one powered by an A-Star. This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands.
If you are coming from the [atreus-firmware](https://github.com/technomancy/atreus-firmware), we've also brought forward the `make upload` command for you to use.
These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, (usually hand-wired) one powered by an A-Star. (usually using a PCB) This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands.
Keyboard Maintainer: QMK Community
Hardware Supported: Atreus PCB
@ -13,6 +11,6 @@ Hardware Availability: https://atreus.technomancy.us
Make example for this keyboard (after setting up your build environment):
make atreus-default
make atreus-default-avrdude
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

+ 0
- 3
keyboards/atreus/rules.mk View File

@ -77,6 +77,3 @@ UNICODE_ENABLE = YES # Unicode
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
USB = /dev/cu.usbmodem1411
# upload: build
# $(ATREUS_UPLOAD_COMMAND)

Loading…
Cancel
Save