diff --git a/keyboards/handwired/unicomp_mini_m/config.h b/keyboards/handwired/unicomp_mini_m/config.h
new file mode 100644
index 00000000000..41676ec8055
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/config.h
@@ -0,0 +1,59 @@
+/*
+Copyright 2021 stevendlander
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER stevendlander
+#define PRODUCT Unicomp Mini M
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1 }
+#define MATRIX_COL_PINS { C7, C6, C5, C4, C3, C2, C1, C0, E1, E0, D7, B7, D5, D4, D3, D2 }
+#define UNUSED_PINS
+
+#define LED_PIN_ON_STATE 0
+#define LED_NUM_LOCK_PIN B6
+#define LED_CAPS_LOCK_PIN B5
+#define LED_SCROLL_LOCK_PIN B4
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */
+#define DEBOUNCE 5
+
+/* The Mini M has no diodes */
+#define MATRIX_HAS_GHOST
diff --git a/keyboards/handwired/unicomp_mini_m/info.json b/keyboards/handwired/unicomp_mini_m/info.json
new file mode 100644
index 00000000000..4b5390779ac
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/info.json
@@ -0,0 +1,462 @@
+{
+ "keyboard_name": "Unicomp Mini M",
+ "url": "",
+ "maintainer": "stevendlander",
+ "width": 15.5,
+ "height": 7.5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ { "label": "Esc",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "F1",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "F2",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "F3",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "F4",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "F5",
+ "x": 6.5,
+ "y": 0
+ },
+ {
+ "label": "F6",
+ "x": 7.5,
+ "y": 0
+ },
+ {
+ "label": "F7",
+ "x": 8.5,
+ "y": 0
+ },
+ {
+ "label": "F8",
+ "x": 9.5,
+ "y": 0
+ },
+ {
+ "label": "F9",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "F10",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "F11",
+ "x": 13,
+ "y": 0
+ },
+ {
+ "label": "F12",
+ "x": 14,
+ "y": 0
+ },
+ {
+ "label": "PrtSc",
+ "x": 15.25,
+ "y": 0
+ },
+ {
+ "label": "Scroll Lock",
+ "x": 16.25,
+ "y": 0
+ },
+ {
+ "label": "Pause",
+ "x": 17.25,
+ "y": 0
+ },
+ {
+ "label": "~",
+ "x": 0,
+ "y": 1.5
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 1.5
+ },
+ {
+ "label": "@",
+ "x": 2,
+ "y": 1.5
+ },
+ {
+ "label": "#",
+ "x": 3,
+ "y": 1.5
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 1.5
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 1.5
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 1.5
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 1.5
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 1.5
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 1.5
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 1.5
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 1.5
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 1.5
+ },
+ {
+ "label": "Backspace",
+ "x": 13,
+ "y": 1.5,
+ "w": 2
+ },
+ {
+ "label": "Insert",
+ "x": 15.25,
+ "y": 1.5
+ },
+ {
+ "label": "Home",
+ "x": 16.25,
+ "y": 1.5
+ },
+ {
+ "label": "PgUp",
+ "x": 17.25,
+ "y": 1.5
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 2.5,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 2.5
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 2.5
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 2.5
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 2.5
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 2.5
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 2.5
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 2.5
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 2.5
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 2.5
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 2.5
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 2.5
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 2.5
+ },
+ {
+ "label": "|",
+ "x": 13.5,
+ "y": 2.5,
+ "w": 1.5
+ },
+ {
+ "label": "Delete",
+ "x": 15.25,
+ "y": 2.5
+ },
+ {
+ "label": "End",
+ "x": 16.25,
+ "y": 2.5
+ },
+ {
+ "label": "PgDn",
+ "x": 17.25,
+ "y": 2.5
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 3.5,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 3.5
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 3.5
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 3.5
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 3.5
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 3.5
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 3.5
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 3.5
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 3.5
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 3.5
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 3.5
+ },
+ {
+ "label": "\"",
+ "x": 11.75,
+ "y": 3.5
+ },
+ {
+ "label": "Enter",
+ "x": 12.75,
+ "y": 3.5,
+ "w": 2.25
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 4.5,
+ "w": 2.25
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 4.5
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 4.5
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 4.5
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 4.5
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 4.5
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 4.5
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 4.5
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 4.5
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 4.5
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 4.5
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 4.5,
+ "w": 2.75
+ },
+ {
+ "label": "\u2191",
+ "x": 16.25,
+ "y": 4.5
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 5.5,
+ "w": 1.5
+ },
+ {
+ "label": "Meta",
+ "x": 1.5,
+ "y": 5.5,
+ "w": 1
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 5.5,
+ "w": 1.5
+ },
+ {
+ "label": "Space",
+ "x": 4,
+ "y": 5.5,
+ "w": 5.75
+ },
+ {
+ "label": "Alt",
+ "x": 9.75,
+ "y": 5.5,
+ "w": 1.25
+ },
+ {
+ "label": "Meta",
+ "x": 11,
+ "y": 5.5,
+ "w": 1.5
+ },
+ {
+ "label": "Menu",
+ "x": 12.5,
+ "y": 5.5,
+ "w": 1
+ },
+ {
+ "label": "Ctrl",
+ "x": 13.5,
+ "y": 5.5,
+ "w": 1.5
+ },
+ {
+ "label": "\u2190",
+ "x": 15.25,
+ "y": 5.5
+ },
+ {
+ "label": "\u2193",
+ "x": 16.25,
+ "y": 5.5
+ },
+ {
+ "label": "\u2192",
+ "x": 17.25,
+ "y": 5.5
+ }
+ ]
+ }
+ }
+}
diff --git a/keyboards/handwired/unicomp_mini_m/keymaps/default/keymap.c b/keyboards/handwired/unicomp_mini_m/keymaps/default/keymap.c
new file mode 100644
index 00000000000..068c6c4b60d
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/keymaps/default/keymap.c
@@ -0,0 +1,106 @@
+/* Copyright 2021 stevendlander
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+// Layer shortcuts
+enum custom_layers {
+ _QWERTY,
+ _NUMPAD,
+};
+
+enum custom_keycodes {
+ NUMSLCK = SAFE_RANGE, // Num Lock on shift, Scroll Lock regularly
+ PAUSRST, // Resets keyboard on shift, Pause|break regularly
+ PSCSYSR, // Sends SYSREQ on alt, Print Screen regularly
+};
+
+// Mod key detection
+#define MODS_SHIFT_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_QWERTY] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, PSCSYSR, NUMSLCK, PAUSRST,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT,
+ KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ [_NUMPAD] = LAYOUT(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NUMSLCK, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_TRNS, KC_PMNS, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PAST, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_TRNS, KC_PDOT, KC_PSLS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+ ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case NUMSLCK: {
+ if (record->event.pressed) {
+ if (keyboard_report->mods & MODS_SHIFT_MASK) {
+ tap_code(KC_NLCK);
+ } else {
+ register_code(KC_SLCK);
+ }
+ } else {
+ unregister_code(KC_SLCK);
+ }
+ break;
+ }
+ case PAUSRST: {
+ if (record->event.pressed) {
+ if (keyboard_report->mods & MODS_SHIFT_MASK) {
+ reset_keyboard();
+ } else {
+ register_code(KC_PAUS);
+ }
+ } else {
+ unregister_code(KC_PAUS);
+ }
+ break;
+ }
+ case PSCSYSR: {
+ if (record->event.pressed) {
+ if (keyboard_report->mods & MODS_ALT_MASK) {
+ tap_code(KC_SYSREQ);
+ } else {
+ register_code(KC_PAUS);
+ }
+ } else {
+ unregister_code(KC_PAUS);
+ }
+ break;
+ }
+ }
+ return true;
+}
+
+bool led_update_user(led_t led_state) {
+ static bool num_state = false;
+ if (num_state != led_state.num_lock) {
+ if (led_state.num_lock) {
+ layer_on(_NUMPAD);
+ } else {
+ layer_off(_NUMPAD);
+ }
+ num_state = led_state.num_lock;
+ }
+ return true;
+}
diff --git a/keyboards/handwired/unicomp_mini_m/keymaps/default/readme.md b/keyboards/handwired/unicomp_mini_m/keymaps/default/readme.md
new file mode 100644
index 00000000000..f15b1b50d3f
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for unicomp\_mini\_m
diff --git a/keyboards/handwired/unicomp_mini_m/readme.md b/keyboards/handwired/unicomp_mini_m/readme.md
new file mode 100644
index 00000000000..0640fbb2505
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/readme.md
@@ -0,0 +1,127 @@
+## Unicomp Mini M with Teensy2.0++ controller & QMK Firmware
+
+### Overview
+
+#### Goals
+
+The goal of this project was to replace the stock control board of the Unicomp Mini M with a programmable one. The Mini
+M was released by [Unicomp](https://www.pckeyboard.com) in Q1 of 2021 and is a re-release of The IBM Model M Space
+Saving Keyboard (SSK) with some enhancements.
+
+This guide strives to achieve the following:
+
+* Make completely reversable changes, or in other words, no permanent modifications to the Mini M
+* Allow full programmability of the Mini M via QMK
+* Be able to flash firmware without having to take the board apart to hit the reset button
+* Create a default keymap that works just like the stock keymap shipped from Unicomp, including the toggle-able number
+ pad
+* Support all LEDs as normal
+
+My guide will go a few steps further:
+
+* Convert the wired connection from USB-A to USB-C
+* Install a potentiometer to dim the LEDs if desired
+
+#### Credits
+
+The following resources were instrumental to the success of this project:
+
+* Model M 101/102 write-up located in `qmk_firmware/keyboards/converter/modelm`
+* [Model M Subreddit](https://modelm.reddit.com)
+* Model M Discord
+
+### Hardware
+
+##### Parts
+
+For a working Mini M with QMK *without* LEDs working, the following parts are necessary:
+
+* 1 Adafruit Perma-Proto Full Sized Breadboard. Luckily, this board is a perfect fit for the Mini M case!
+* 1 Teensy2.0++, with headers soldered on if you can find it
+ * 2 20-row x 1 column headers, if you can't find a Teensy with headers already soldered on
+* 2 16-pin Ribbon connectors, PCB mount
+* Hookup wire. I used 30AWG wire and while it worked, I should have used 1 gauge (or more) thicker
+* A panel mount male USB-B to female USB-C extender
+
+To get the Mini M working with LEDs, you will need:
+
+* 3 1kOhm through-hole resistors
+
+##### Tools
+
+The following were absolutely critical for the project:
+
+* Soldering iron, preferably one with a narrow tip for small connections
+* Drill, preferably a hand-held rotary tool (such as a Dremel)
+* Wire strippers/cutters
+* A sharp knife
+
+Optional, but worth having around:
+
+* Helping-hands, PCB holder, preferably both
+* Multi-meter for testing continuity of your connections
+* Hot-glue gun for mounting the USB extender to the Perma-Proto
+
+### Assembly
+
+#### Solder Teensy to the Perma-Proto
+
+1. Solder headers to Teensy
+2. Solder headers to Perma-Proto
+
+#### Solder ribbon connectors
+
+* Rows on the Perma-Proto that line up with membrane ribbons
+* Trim excess under board
+* Test continuity
+
+#### Solder in hookup wires
+
+* Ribbon connector used for the right ribbon will need hookup wire to establish connections to the Teensy
+* 12 required, 16 if you want full functionality
+
+#### Optional: Solder in resistors
+
+#### Caveat: D6 pin on the Teensy
+
+There are a few ways to mount the Teensy to the Perma-Proto board. I chose to connect my 16 pin ribbon connector to the
+Teensy pins starting at C7 and ending at D2. If you do this, beware that pin D6 will not work for the purposes of this
+project. It is possible to modify it to make it so, but that is beyond the scope of this guide.
+
+Bypassing D6 is necessary if you mount your ribbon connector as I have just described. Luckily, it is a simple process!
+First, with a sharp knife, sever the connection between your ribbon connector pin that is connected to Teensy D6 pin. I
+would recommend doing this at the closest possible point to the Teensy on the underside of the Perma-Proto board. Once
+that is done, use a remaining point on the Perma-Proto bus for that ribbon connection (that was previously connected to
+D6) to add a jumper wire connected to pin B7. If you are using the firmware files provided in this repository,
+everything is already set for this configuration.
+
+### Testing
+
+### Software
+
+#### Build firmware
+
+See qmk documentation on getting your build environment working.
+
+Compile the Mini M firmware files with the default keymap. It allows for the Mini M to be used with the same
+functionality as shipped from the manufacturer.
+
+```bash
+$ qmk compile -kb unicomp/mini_m -km default
+```
+
+While plugged in, press the reset button on your Teensy and then:
+
+```bash
+$ qmk flash -kb unicomp/mini_m -km default
+```
+
+If everything works to this point, congratulations! You now have a programmable Mini M. If you are using the default
+keymap, you can reset your Teensy by pressing Shift+Pause together, eliminating the need to take apart the case in order
+to do so.
+
+#### Keymaps
+
+To build your own keymap, create a new directory in `keyboards/unicomp/mini_m/keymaps/`, copy the files from
+`keyboards/unicomp/mini_m/default` into your new directory, and edit them as you wish. When you are ready to flash your
+new keymap to the Mini M, the command will be `qmk flash -kb unicomp/mini_m -kb `.
diff --git a/keyboards/handwired/unicomp_mini_m/rules.mk b/keyboards/handwired/unicomp_mini_m/rules.mk
new file mode 100644
index 00000000000..92cbe9b134c
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = at90usb1286
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = no # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no # Enable Bluetooth
+AUDIO_ENABLE = no # Audio output
diff --git a/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.c b/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.c
new file mode 100644
index 00000000000..e8249df2512
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.c
@@ -0,0 +1,16 @@
+/* Copyright 2021 stevendlander
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include "unicomp_mini_m.h"
diff --git a/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.h b/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.h
new file mode 100644
index 00000000000..8e426da0510
--- /dev/null
+++ b/keyboards/handwired/unicomp_mini_m/unicomp_mini_m.h
@@ -0,0 +1,49 @@
+/* Copyright 2021 stevendlander
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ * The first section contains "names" for physical keys of the keyboard
+ * and defines their position on the board.
+ * The second section defines position of the keys on the switch matrix
+ * (where COLUMNS and ROWS crosses). */
+
+#define LAYOUT( \
+ K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, \
+ \
+ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, \
+ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, \
+ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, \
+ K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1O, \
+ K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, K0J, K0K \
+) \
+{ \
+/* 00 */ { K4A, K5A, K4F, K1M, K5C, K5D, K5E, K3K, KC_NO, KC_NO, KC_NO, KC_NO, K0C, K2N, KC_NO, KC_NO }, \
+/* 01 */ { K2A, K1B, K3B, KC_NO, KC_NO, KC_NO, KC_NO, K4G, K5F, KC_NO, KC_NO, KC_NO, KC_NO, K2M, K0H, K1N, }, \
+/* 02 */ { K2C, K2D, K5B, K2E, K2F, K1C, K1E, KC_NO, K1D, K1F, K1G, K2B, K3A, KC_NO, KC_NO, KC_NO }, \
+/* 03 */ { KC_NO, KC_NO, K4B, KC_NO, KC_NO, KC_NO, KC_NO, K3G, K5G, KC_NO, KC_NO, K0B, KC_NO, KC_NO, KC_NO, KC_NO }, \
+/* 04 */ { KC_NO, KC_NO, K4E, KC_NO, KC_NO, KC_NO, KC_NO, K3J, K5H, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0A, K1A, }, \
+/* 05 */ { KC_NO, KC_NO, K3C, KC_NO, KC_NO, KC_NO, KC_NO, K4H, K5I, K3L, K0F, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+/* 06 */ { KC_NO, KC_NO, K4C, KC_NO, KC_NO, KC_NO, KC_NO, K3H, K5J, K4M, K5K, K5L, K4L, K5N, KC_NO, KC_NO }, \
+/* 07 */ { KC_NO, KC_NO, K4D, KC_NO, KC_NO, KC_NO, KC_NO, K3I, KC_NO, KC_NO, KC_NO, K5M, K4N, K5O, KC_NO, KC_NO }, \
+/* 08 */ { KC_NO, KC_NO, K3F, KC_NO, KC_NO, KC_NO, KC_NO, K4K, KC_NO, K4O, K1O, K3P, K4P, KC_NO, KC_NO, KC_NO }, \
+/* 09 */ { KC_NO, KC_NO, K3E, K0E, K0I, KC_NO, KC_NO, K4J, KC_NO, K3N, KC_NO, KC_NO, KC_NO, K4Q, KC_NO, KC_NO }, \
+/* 0A */ { K0D, KC_NO, K3D, KC_NO, K0G, KC_NO, KC_NO, K4I, KC_NO, K3M, K0K, K0J, K4R, K3Q, KC_NO, KC_NO }, \
+/* 0B */ { K1I, K1J, KC_NO, K1K, K1L, K2G, K2I, KC_NO, K2H, K2J, K2K, K1H, K2L, K3O, KC_NO, K5P, }, \
+}
+/* 0 1 2 3 4 5 6 7 8 9 A B C D E F */