|
|
@ -1,60 +0,0 @@ |
|
|
|
# TGR Alice |
|
|
|
|
|
|
|
![TGR Alice](https://i.imgur.com/cJohEqS.jpg) |
|
|
|
|
|
|
|
An ergonomic 60% keyboard. |
|
|
|
|
|
|
|
Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) |
|
|
|
Hardware Supported: TGR Alice |
|
|
|
Hardware Availability: Group buy finished |
|
|
|
|
|
|
|
Make example for this keyboard (after setting up your build environment): |
|
|
|
|
|
|
|
make alice:default |
|
|
|
|
|
|
|
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. |
|
|
|
|
|
|
|
|
|
|
|
ps2avrGB keyboard firmware |
|
|
|
========================== |
|
|
|
|
|
|
|
This keyboard uses the port of the QMK firmware for boards that are based on the |
|
|
|
ps2avrGB firmware. |
|
|
|
|
|
|
|
Note that this is a complete replacement for the firmware, so you won't be |
|
|
|
using Bootmapper Client to change any keyboard settings, since not all the |
|
|
|
USB report options are supported. |
|
|
|
|
|
|
|
## Installing |
|
|
|
|
|
|
|
First, install the requirements. These commands are for OSX, but all you |
|
|
|
need is the AVR toolchain and `bootloadHID` for flashing: |
|
|
|
|
|
|
|
``` |
|
|
|
$ brew cask install crosspack-avr |
|
|
|
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb |
|
|
|
$ pip install pyusb |
|
|
|
``` |
|
|
|
|
|
|
|
Then, with the keyboard plugged in, simply run this command from the |
|
|
|
`qmk_firmware` directory: |
|
|
|
|
|
|
|
``` |
|
|
|
$ make alice |
|
|
|
$ bootloadHID -r alice_default.hex |
|
|
|
``` |
|
|
|
|
|
|
|
## Setting the board to bootloader mode |
|
|
|
|
|
|
|
Hold the ESC key (the one before the 1! key, in case you remaped it). |
|
|
|
|
|
|
|
## Troubleshooting |
|
|
|
|
|
|
|
From my experience, it's really hard to brick these boards. But these |
|
|
|
tricks have been useful when it got stuck in a weird scenario. |
|
|
|
|
|
|
|
1. Try plugging the board in while holding the bootloader key. This will force |
|
|
|
it to boot only the bootloader without loading the firmware. Once this is |
|
|
|
done, just reflash the board with the original firmware. |
|
|
|
2. Sometimes USB hubs can act weird, so try connecting the board directly |
|
|
|
to your computer or plugging/unplugging the USB hub. |