@ -0,0 +1,33 @@ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0x484C // "HL" | |||||
#define PRODUCT_ID 0x0087 // "TKL" | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Hardlineworks | |||||
#define PRODUCT OTD-PLUS | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 12 | |||||
#define MATRIX_COLS 9 | |||||
#define MATRIX_ROW_PINS { D2, D4, D1, E6, F5, C6, B6, F6, F0, D0, D6, D3 } | |||||
#define MATRIX_COL_PINS { B3, B2, B1, B7, B0, F1, D7, F7, C7 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
#define CAPS_LOCK_LED_PIN F4 | |||||
#define SCROLL_LOCK_LED_PIN D5 | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCE 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE |
@ -0,0 +1,103 @@ | |||||
{ | |||||
"keyboard_name": "OTD-PLUS", | |||||
"url": "", | |||||
"maintainer": "Hardlineworks", | |||||
"width": 18.25, | |||||
"height": 6.25, | |||||
"layouts": { | |||||
"LAYOUT_tkl_ansi_wkl": { | |||||
"layout": [ | |||||
{"label" : "Esc", "x":0, "y":0}, | |||||
{"label" : "F1", "x":2, "y":0}, | |||||
{"label" : "F2", "x":3, "y":0}, | |||||
{"label" : "F3", "x":4, "y":0}, | |||||
{"label" : "F4", "x":5, "y":0}, | |||||
{"label" : "F5", "x":6.5, "y":0}, | |||||
{"label" : "F6", "x":7.5, "y":0}, | |||||
{"label" : "F7", "x":8.5, "y":0}, | |||||
{"label" : "F8", "x":9.5, "y":0}, | |||||
{"label" : "F9", "x":11, "y":0}, | |||||
{"label" : "F10", "x":12, "y":0}, | |||||
{"label" : "F11", "x":13, "y":0}, | |||||
{"label" : "F12", "x":14, "y":0}, | |||||
{"label" : "Print screen", "x":15.25, "y":0}, | |||||
{"label" : "Scroll lock", "x":16.25, "y":0}, | |||||
{"label" : "Pause", "x":17.25, "y":0}, | |||||
{"label" : "`", "x":0, "y":1.25}, | |||||
{"label" : "1", "x":1, "y":1.25}, | |||||
{"label" : "2", "x":2, "y":1.25}, | |||||
{"label" : "3", "x":3, "y":1.25}, | |||||
{"label" : "4", "x":4, "y":1.25}, | |||||
{"label" : "5", "x":5, "y":1.25}, | |||||
{"label" : "6", "x":6, "y":1.25}, | |||||
{"label" : "7", "x":7, "y":1.25}, | |||||
{"label" : "8", "x":8, "y":1.25}, | |||||
{"label" : "9", "x":9, "y":1.25}, | |||||
{"label" : "0", "x":10, "y":1.25}, | |||||
{"label" : "-", "x":11, "y":1.25}, | |||||
{"label" : "=", "x":12, "y":1.25}, | |||||
{"label" : "Backspace", "x":13, "y":1.25, "w":2}, | |||||
{"label" : "Insert", "x":15.25, "y":1.25}, | |||||
{"label" : "Home", "x":16.25, "y":1.25}, | |||||
{"label" : "Page up", "x":17.25, "y":1.25}, | |||||
{"label" : "Tab", "x":0, "y":2.25, "w":1.5}, | |||||
{"label" : "Q", "x":1.5, "y":2.25}, | |||||
{"label" : "W", "x":2.5, "y":2.25}, | |||||
{"label" : "E", "x":3.5, "y":2.25}, | |||||
{"label" : "R", "x":4.5, "y":2.25}, | |||||
{"label" : "T", "x":5.5, "y":2.25}, | |||||
{"label" : "Y", "x":6.5, "y":2.25}, | |||||
{"label" : "U", "x":7.5, "y":2.25}, | |||||
{"label" : "I", "x":8.5, "y":2.25}, | |||||
{"label" : "O", "x":9.5, "y":2.25}, | |||||
{"label" : "P", "x":10.5, "y":2.25}, | |||||
{"label" : "[", "x":11.5, "y":2.25}, | |||||
{"label" : "]", "x":12.5, "y":2.25}, | |||||
{"label" : "|", "x":13.5, "y":2.25, "w":1.5}, | |||||
{"label" : "Delete", "x":15.25, "y":2.25}, | |||||
{"label" : "End", "x":16.25, "y":2.25}, | |||||
{"label" : "Page down", "x":17.25, "y":2.25}, | |||||
{"label" : "Caps lock", "x":0, "y":3.25, "w":1.75}, | |||||
{"label" : "A", "x":1.75, "y":3.25}, | |||||
{"label" : "S", "x":2.75, "y":3.25}, | |||||
{"label" : "D", "x":3.75, "y":3.25}, | |||||
{"label" : "F", "x":4.75, "y":3.25}, | |||||
{"label" : "G", "x":5.75, "y":3.25}, | |||||
{"label" : "H", "x":6.75, "y":3.25}, | |||||
{"label" : "J", "x":7.75, "y":3.25}, | |||||
{"label" : "K", "x":8.75, "y":3.25}, | |||||
{"label" : "L", "x":9.75, "y":3.25}, | |||||
{"label" : ";", "x":10.75, "y":3.25}, | |||||
{"label" : "'", "x":11.75, "y":3.25}, | |||||
{"label" : "Enter", "x":12.75, "y":3.25, "w":2.25}, | |||||
{"label" : "Shift", "x":0, "y":4.25, "w":2.25}, | |||||
{"label" : "Z", "x":2.25, "y":4.25}, | |||||
{"label" : "X", "x":3.25, "y":4.25}, | |||||
{"label" : "C", "x":4.25, "y":4.25}, | |||||
{"label" : "V", "x":5.25, "y":4.25}, | |||||
{"label" : "B", "x":6.25, "y":4.25}, | |||||
{"label" : "N", "x":7.25, "y":4.25}, | |||||
{"label" : "M", "x":8.25, "y":4.25}, | |||||
{"label" : ",", "x":9.25, "y":4.25}, | |||||
{"label" : ".", "x":10.25, "y":4.25}, | |||||
{"label" : "/", "x":11.25, "y":4.25}, | |||||
{"label" : "Shift", "x":12.25, "y":4.25, "w":2.75}, | |||||
{"label" : "Up", "x":16.25, "y":4.25}, | |||||
{"label" : "Ctrl", "x":0, "y":5.25, "w":1.5}, | |||||
{"label" : "Alt", "x":2.5, "y":5.25, "w":1.5}, | |||||
{"label" : "Space", "x":4, "y":5.25, "w":7}, | |||||
{"label" : "Alt", "x":11, "y":5.25, "w":1.5}, | |||||
{"label" : "Ctrl", "x":13.5, "y":5.25, "w":1.5}, | |||||
{"label" : "Left", "x":15.25, "y":5.25 }, | |||||
{"label" : "Down", "x":16.25, "y":5.25 }, | |||||
{"label" : "Right", "x":17.25, "y":5.25 } | |||||
] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,22 @@ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_tkl_ansi_wkl( | |||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||||
KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_tkl_ansi_wkl( | |||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
}; |
@ -0,0 +1,12 @@ | |||||
#include "otd_plus.h" | |||||
void keyboard_pre_init_kb(void) { | |||||
led_init_ports(); | |||||
keyboard_pre_init_user(); | |||||
} | |||||
void led_init_ports(void) { | |||||
setPinOutput(CAPS_LOCK_LED_PIN); | |||||
setPinOutput(SCROLL_LOCK_LED_PIN); | |||||
} | |||||
@ -0,0 +1,35 @@ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
/* This a shortcut to help you visually see your layout. | |||||
* | |||||
* The first section contains all of the arguments representing the physical | |||||
* layout of the board and position of the keys. | |||||
* | |||||
* The second converts the arguments into a two-dimensional array which | |||||
* represents the switch matrix. | |||||
*/ | |||||
#define LAYOUT_tkl_ansi_wkl( \ | |||||
K00, K01, KB1, K02, KB2, K03, KB3, K04, KB4, KB5, K06, KB6, K07, KB7, K08, KB8, \ | |||||
K10, KA0, K11, KA1, K12, KA2, K13, KA3, K14, KA4, K15, KA5, K16, KA6, KA7, K18, KA8, \ | |||||
K20, K90, K21, K91, K22, K92, K23, K93, K24, K94, K25, K95, K26, K96, K97, K28, K98, \ | |||||
K30, K80, K31, K81, K32, K82, K33, K83, K34, K84, K35, K85, K86, \ | |||||
K40, K70, K41, K71, K42, K72, K43, K73, K44, K74, K45, K46, K48, \ | |||||
K50, K51, K62, K55, K56, K67, K58, K68 \ | |||||
) \ | |||||
{ \ | |||||
{ K00, K01, K02, K03, K04, KC_NO, K06, K07, K08, }, \ | |||||
{ K10, K11, K12, K13, K14, K15, K16, KC_NO, K18, }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO, K28, }, \ | |||||
{ K30, K31, K32, K33, K34, K35, KC_NO, KC_NO, KC_NO, }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, KC_NO, K48, }, \ | |||||
{ K50, K51, KC_NO, KC_NO, KC_NO, K55, K56, KC_NO, K58, }, \ | |||||
{ KC_NO, KC_NO, K62, KC_NO, KC_NO, KC_NO, KC_NO, K67, K68, }, \ | |||||
{ K70, K71, K72, K73, K74, KC_NO, KC_NO, KC_NO, KC_NO, }, \ | |||||
{ K80, K81, K82, K83, K84, K85, K86, KC_NO, KC_NO, }, \ | |||||
{ K90, K91, K92, K93, K94, K95, K96, K97, K98, }, \ | |||||
{ KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, }, \ | |||||
{ KC_NO, KB1, KB2, KB3, KB4, KB5, KB6, KB7, KB8, }, \ | |||||
} |
@ -0,0 +1,16 @@ | |||||
# [OTD PLUS](https://github.com/gadzkun/Hardlineworks/tree/master/otd%20plus) | |||||
![TKL top](https://user-images.githubusercontent.com/67696967/87272049-54679300-c4ff-11ea-8f5a-4f7c2825b85c.png) | |||||
A modern PCB replacement for OTD keyboards, powered by HardLineWorks | |||||
* Keyboard Maintainer : [Hardlineworks](https://github.com/gadzkun/Hardlineworks) | |||||
* Hardware Supported : otd plus pcb | |||||
* Hardware Availability : Private GB | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make hardlineworks/otd_plus:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||||
@ -0,0 +1,22 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Bootloader selection | |||||
BOOTLOADER = atmel-dfu | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = no # Console for debug | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||||
AUDIO_ENABLE = no # Audio output |