OLED driver tweaks (#13215)

docs/feature_oled_driver.md

@@ -263,22 +263,11 @@ void oled_write(const char *data, bool invert);
 void oled_write_ln(const char *data, bool invert);
 
 // Pans the buffer to the right (or left by passing true) by moving contents of the buffer
-// Useful for moving the screen in preparation for new drawing 
+// Useful for moving the screen in preparation for new drawing
 // oled_scroll_left or oled_scroll_right should be preferred for all cases of moving a static
 // image such as a logo or to avoid burn-in as it's much, much less cpu intensive
 void oled_pan(bool left);
 
-// Writes a PROGMEM string to the buffer at current cursor position
-// Advances the cursor while writing, inverts the pixels if true
-// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM
-void oled_write_P(const char *data, bool invert);
-
-// Writes a PROGMEM string to the buffer at current cursor position
-// Advances the cursor while writing, inverts the pixels if true
-// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
-// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
-void oled_write_ln_P(const char *data, bool invert);
-
 // Returns a pointer to the requested start index in the buffer plus remaining
 // buffer length as struct
 oled_buffer_reader_t oled_read_raw(uint16_t start_index);
@@ -289,13 +278,24 @@ void oled_write_raw(const char *data, uint16_t size);
 // Writes a single byte into the buffer at the specified index
 void oled_write_raw_byte(const char data, uint16_t index);
 
-// Writes a PROGMEM string to the buffer at current cursor position
-void oled_write_raw_P(const char *data, uint16_t size);
-
 // Sets a specific pixel on or off
 // Coordinates start at top-left and go right and down for positive x and y
 void oled_write_pixel(uint8_t x, uint8_t y, bool on);
 
+// Writes a PROGMEM string to the buffer at current cursor position
+// Advances the cursor while writing, inverts the pixels if true
+// Remapped to call 'void oled_write(const char *data, bool invert);' on ARM
+void oled_write_P(const char *data, bool invert);
+
+// Writes a PROGMEM string to the buffer at current cursor position
+// Advances the cursor while writing, inverts the pixels if true
+// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
+// Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
+void oled_write_ln_P(const char *data, bool invert);
+
+// Writes a PROGMEM string to the buffer at current cursor position
+void oled_write_raw_P(const char *data, uint16_t size);
+
 // Can be used to manually turn on the screen if it is off
 // Returns true if the screen was on or turns on
 bool oled_on(void);

drivers/oled/oled_driver.c

@@ -115,7 +115,7 @@ bool            oled_initialized    = false;
 bool            oled_active         = false;
 bool            oled_scrolling      = false;
 uint8_t         oled_brightness     = OLED_BRIGHTNESS;
-uint8_t         oled_rotation       = 0;
+oled_rotation_t oled_rotation       = 0;
 uint8_t         oled_rotation_width = 0;
 uint8_t         oled_scroll_speed   = 0;  // this holds the speed after being remapped to ssd1306 internal values
 uint8_t         oled_scroll_start   = 0;
@@ -158,7 +158,7 @@ static void InvertCharacter(uint8_t *cursor) {
     }
 }
 
-bool oled_init(uint8_t rotation) {
+bool oled_init(oled_rotation_t rotation) {
 #if defined(USE_I2C) && defined(SPLIT_KEYBOARD)
     if (!is_keyboard_master()) {
         return true;

drivers/oled/oled_driver.h

@@ -226,13 +226,17 @@ void oled_write(const char *data, bool invert);
 void oled_write_ln(const char *data, bool invert);
 
 // Pans the buffer to the right (or left by passing true) by moving contents of the buffer
+// Useful for moving the screen in preparation for new drawing
 void oled_pan(bool left);
 
 // Returns a pointer to the requested start index in the buffer plus remaining
 // buffer length as struct
 oled_buffer_reader_t oled_read_raw(uint16_t start_index);
 
+// Writes a string to the buffer at current cursor position
 void oled_write_raw(const char *data, uint16_t size);
+
+// Writes a single byte into the buffer at the specified index
 void oled_write_raw_byte(const char data, uint16_t index);
 
 // Sets a specific pixel on or off
@@ -251,17 +255,11 @@ void oled_write_P(const char *data, bool invert);
 // Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
 void oled_write_ln_P(const char *data, bool invert);
 
+// Writes a PROGMEM string to the buffer at current cursor position
 void oled_write_raw_P(const char *data, uint16_t size);
 #else
-// Writes a string to the buffer at current cursor position
-// Advances the cursor while writing, inverts the pixels if true
 #    define oled_write_P(data, invert) oled_write(data, invert)
-
-// Writes a string to the buffer at current cursor position
-// Advances the cursor while writing, inverts the pixels if true
-// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
 #    define oled_write_ln_P(data, invert) oled_write(data, invert)
-
 #    define oled_write_raw_P(data, size) oled_write_raw(data, size)
 #endif  // defined(__AVR__)