@ -0,0 +1,6 @@ | |||
# polycarbdiet | |||
QMK folder for custom PCB firmware. | |||
Github: polycarbdiet | |||
Discord: polycarb_diet | |||
Reddit: u/polycarb_diet |
@ -0,0 +1,61 @@ | |||
/* Copyright 2020 Muhammad Galib (polycarbdiet) <pd.keyboards@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x5040 // PD = polycarbdiet | |||
#define PRODUCT_ID 0x7320 // S20 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER polycarbdiet | |||
#define PRODUCT S20 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 4 | |||
// 1 2 3 4 5 | |||
#define MATRIX_ROW_PINS { B7, E6, D0, D1, D5 } | |||
#define MATRIX_COL_PINS { C6, C7, D4, D6 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION ROW2COL | |||
#define BACKLIGHT_PIN B6 | |||
#define BACKLIGHT_LEVELS 3 | |||
#define BACKLIGHT_BREATHING | |||
#define RGB_DI_PIN B3 | |||
#define RGBLED_NUM 4 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
#define RGBLIGHT_ANIMATIONS | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
#define FORCE_NKRO |
@ -0,0 +1,88 @@ | |||
{ | |||
"keyboard_name": "S20 revA", | |||
"url": "", | |||
"maintainer": "polycarbdiet", | |||
"width": 4, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT_ortho_5x4": { | |||
"layout": [ | |||
{"x":0, "y":0}, | |||
{"x":1, "y":0}, | |||
{"x":2, "y":0}, | |||
{"x":3, "y":0}, | |||
{"x":0, "y":1}, | |||
{"x":1, "y":1}, | |||
{"x":2, "y":1}, | |||
{"x":3, "y":1}, | |||
{"x":0, "y":2}, | |||
{"x":1, "y":2}, | |||
{"x":2, "y":2}, | |||
{"x":3, "y":2}, | |||
{"x":0, "y":3}, | |||
{"x":1, "y":3}, | |||
{"x":2, "y":3}, | |||
{"x":3, "y":3}, | |||
{"x":0, "y":4}, | |||
{"x":1, "y":4}, | |||
{"x":2, "y":4}, | |||
{"x":3, "y":4} | |||
] | |||
}, | |||
"LAYOUT_numpad_5x4":{ | |||
"layout": [ | |||
{"x":0, "y":0}, | |||
{"x":1, "y":0}, | |||
{"x":2, "y":0}, | |||
{"x":3, "y":0}, | |||
{"x":0, "y":1}, | |||
{"x":1, "y":1}, | |||
{"x":2, "y":1}, | |||
{"x":0, "y":2}, | |||
{"x":1, "y":2}, | |||
{"x":2, "y":2}, | |||
{"x":3, "y":1, "h":2}, | |||
{"x":0, "y":3}, | |||
{"x":1, "y":3}, | |||
{"x":2, "y":3}, | |||
{"x":0, "y":4, "w":2}, | |||
{"x":2, "y":4}, | |||
{"x":3, "y":3, "h":2} | |||
] | |||
}, | |||
"LAYOUT_enter": { | |||
"layout": [ | |||
{"x":0, "y":0}, | |||
{"x":1, "y":0}, | |||
{"x":2, "y":0}, | |||
{"x":3, "y":0}, | |||
{"x":0, "y":1}, | |||
{"x":1, "y":1}, | |||
{"x":2, "y":1}, | |||
{"x":3, "y":1}, | |||
{"x":0, "y":2}, | |||
{"x":1, "y":2}, | |||
{"x":2, "y":2}, | |||
{"x":3, "y":2}, | |||
{"x":0, "y":3}, | |||
{"x":1, "y":3}, | |||
{"x":2, "y":3}, | |||
{"x":3, "y":3, "h":2}, | |||
{"x":0, "y":4}, | |||
{"x":1, "y":4}, | |||
{"x":2, "y":4} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,47 @@ | |||
/* Copyright 2020 Muhammad Galib (polycarbdiet) <pd.keyboards@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ortho_5x4( | |||
KC_ESC, KC_PAST, KC_PSLS, KC_BSPC, | |||
KC_P7, KC_P8, KC_P9, KC_PMNS, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, KC_PENT, | |||
KC_P0, KC_PDOT, MO(1), RGB_TOG | |||
), | |||
[1] = LAYOUT_ortho_5x4( | |||
KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, | |||
KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, | |||
RESET, MO(2), KC_TRNS, KC_TRNS | |||
), | |||
[2] = LAYOUT_ortho_5x4( | |||
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, | |||
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, | |||
BL_TOGG, BL_ON, BL_INC, BL_STEP, | |||
KC_TRNS, BL_OFF, BL_DEC, BL_BRTG, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
[3] = LAYOUT_ortho_5x4( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
) | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for S20 |
@ -0,0 +1,27 @@ | |||
# S20 | |||
![S20](https://i.imgur.com/RvOACqR.jpg?1) | |||
The S20 keyboard is a FR4 sandwich keyboard which was orginally designed to add extra functionality to a user's current keyboard setup. | |||
* Keyboard Maintainer: [polycarbdiet](https://github.com/polycarbdiet) | |||
* Hardware Supported: S20 - FR4 sandwich MacroPad/NumberPad | |||
* Hardware Availability: Custom, limitied quantaties. | |||
Make example for this keyboard (after setting up your build environment): | |||
make polycarbdiet/s20:default | |||
Flashing example for this keyboard: | |||
make polycarbdiet/s20:default:flash | |||
**Reset Method:** | |||
- Press the `RESET` button on the under side of the PCB | |||
**Bootloader Method:** | |||
- Hold down the key located at `K00`, commonly programmed as `ESC`, while plugging in the keyboard. | |||
- Hold down the key located at `K00`, commonly programmed as `ESC`, and press the RESET button on the PCB. | |||
- Hold down the key located at `K42` and then press the key located at `K40`. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
LAYOUTS = ortho_5x4 numpad_5x4 |
@ -0,0 +1,17 @@ | |||
/* Copyright 2020 Muhammad Galib (polycarbdiet) <pd.keyboards@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "s20.h" |
@ -0,0 +1,61 @@ | |||
/* Copyright 2020 Muhammad Galib (polycarbdiet) <pd.keyboards@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT_ortho_5x4( \ | |||
K00, K01, K02, K03, \ | |||
K10, K11, K12, K13, \ | |||
K20, K21, K22, K23, \ | |||
K30, K31, K32, K33, \ | |||
K40, K41, K42, K43 \ | |||
) { \ | |||
{ K00, K01, K02, K03 }, \ | |||
{ K10, K11, K12, K13 }, \ | |||
{ K20, K21, K22, K23 }, \ | |||
{ K30, K31, K32, K33 }, \ | |||
{ K40, K41, K42, K43 } \ | |||
} | |||
#define LAYOUT_numpad_5x4( \ | |||
K00, K01, K02, K03, \ | |||
K10, K11, K12, \ | |||
K20, K21, K22, K13, \ | |||
K30, K31, K32, \ | |||
K40, K42, K33 \ | |||
) { \ | |||
{ K00, K01, K02, K03 }, \ | |||
{ K10, K11, K12, K13 }, \ | |||
{ K20, K21, K22, KC_NO }, \ | |||
{ K30, K31, K32, K33 }, \ | |||
{ K40, KC_NO, K42, KC_NO } \ | |||
} | |||
#define LAYOUT_enter( \ | |||
K00, K01, K02, K03, \ | |||
K10, K11, K12, K13, \ | |||
K20, K21, K22, K23, \ | |||
K30, K31, K32, K33, \ | |||
K40, K41, K42 \ | |||
) { \ | |||
{ K00, K01, K02, K03 }, \ | |||
{ K10, K11, K12, K13 }, \ | |||
{ K20, K21, K22, K23 }, \ | |||
{ K30, K31, K32, K33 }, \ | |||
{ K40, K41, K42, KC_NO } \ | |||
} |