Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/14792/head
@ -0,0 +1,147 @@ | |||
/* | |||
Copyright 2021 Mechlovin' | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x4D4C | |||
#define PRODUCT_ID 0x0600 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Mechlovin Studio | |||
#define PRODUCT Jay60 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { C2, C1, C0, D7, A1 } | |||
#define MATRIX_COL_PINS { B6, B5, B3, B2, B1, B0, A0, A6, A7, C7, C6, C5, C4, C3 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
//#define LED_NUM_LOCK_PIN B0 | |||
#define LED_CAPS_LOCK_PIN D4 | |||
//#define LED_SCROLL_LOCK_PIN B2 | |||
//#define LED_COMPOSE_PIN B3 | |||
//#define LED_KANA_PIN B4 | |||
//#define BACKLIGHT_PIN B7 | |||
//#define BACKLIGHT_LEVELS 3 | |||
//#define BACKLIGHT_BREATHING | |||
//#define RGB_DI_PIN E2 | |||
//#ifdef RGB_DI_PIN | |||
//# define RGBLED_NUM 16 | |||
//# define RGBLIGHT_HUE_STEP 8 | |||
//# define RGBLIGHT_SAT_STEP 8 | |||
//# define RGBLIGHT_VAL_STEP 8 | |||
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
//# define RGBLIGHT_ANIMATIONS | |||
/*== or choose animations ==*/ | |||
//# define RGBLIGHT_EFFECT_BREATHING | |||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
//# define RGBLIGHT_EFFECT_SNAKE | |||
//# define RGBLIGHT_EFFECT_KNIGHT | |||
//# define RGBLIGHT_EFFECT_CHRISTMAS | |||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
//# define RGBLIGHT_EFFECT_RGB_TEST | |||
//# define RGBLIGHT_EFFECT_ALTERNATING | |||
/*== customize breathing effect ==*/ | |||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
/*==== use exp() and sin() ====*/ | |||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
//#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,78 @@ | |||
{ | |||
"keyboard_name": "Jay60", | |||
"url": "", | |||
"maintainer": "Mechlovin' Studio", | |||
"layouts": { | |||
"LAYOUT_all": { | |||
"layout": [ | |||
{"x": 0, "y": 0}, | |||
{"x": 1, "y": 0}, | |||
{"x": 2, "y": 0}, | |||
{"x": 3, "y": 0}, | |||
{"x": 4, "y": 0}, | |||
{"x": 5, "y": 0}, | |||
{"x": 6, "y": 0}, | |||
{"x": 7, "y": 0}, | |||
{"x": 8, "y": 0}, | |||
{"x": 9, "y": 0}, | |||
{"x": 10, "y": 0}, | |||
{"x": 11, "y": 0}, | |||
{"x": 12, "y": 0}, | |||
{"x": 13, "y": 0}, | |||
{"x": 14, "y": 0}, | |||
{"x": 0, "y": 1, "w": 1.5}, | |||
{"x": 1.5, "y": 1}, | |||
{"x": 2.5, "y": 1}, | |||
{"x": 3.5, "y": 1}, | |||
{"x": 4.5, "y": 1}, | |||
{"x": 5.5, "y": 1}, | |||
{"x": 6.5, "y": 1}, | |||
{"x": 7.5, "y": 1}, | |||
{"x": 8.5, "y": 1}, | |||
{"x": 9.5, "y": 1}, | |||
{"x": 10.5, "y": 1}, | |||
{"x": 11.5, "y": 1}, | |||
{"x": 12.5, "y": 1}, | |||
{"x": 13.5, "y": 1, "w": 1.5}, | |||
{"x": 0, "y": 2, "w": 1.75}, | |||
{"x": 1.75, "y": 2}, | |||
{"x": 2.75, "y": 2}, | |||
{"x": 3.75, "y": 2}, | |||
{"x": 4.75, "y": 2}, | |||
{"x": 5.75, "y": 2}, | |||
{"x": 6.75, "y": 2}, | |||
{"x": 7.75, "y": 2}, | |||
{"x": 8.75, "y": 2}, | |||
{"x": 9.75, "y": 2}, | |||
{"x": 10.75, "y": 2}, | |||
{"x": 11.75, "y": 2}, | |||
{"x": 12.75, "y": 2, "w": 2.25}, | |||
{"x": 0, "y": 3, "w": 2.25}, | |||
{"x": 2.25, "y": 3}, | |||
{"x": 3.25, "y": 3}, | |||
{"x": 4.25, "y": 3}, | |||
{"x": 5.25, "y": 3}, | |||
{"x": 6.25, "y": 3}, | |||
{"x": 7.25, "y": 3}, | |||
{"x": 8.25, "y": 3}, | |||
{"x": 9.25, "y": 3}, | |||
{"x": 10.25, "y": 3}, | |||
{"x": 11.25, "y": 3}, | |||
{"x": 12.25, "y": 3, "w": 1.75}, | |||
{"x": 14, "y": 3}, | |||
{"x": 0, "y": 4, "w": 1.25}, | |||
{"x": 1.25, "y": 4, "w": 1.25}, | |||
{"x": 2.5, "y": 4, "w": 1.25}, | |||
{"x": 3.75, "y": 4, "w": 6.25}, | |||
{"x": 10, "y": 4, "w": 1.25}, | |||
{"x": 11.25, "y": 4, "w": 1.25}, | |||
{"x": 12.5, "y": 4, "w": 1.25}, | |||
{"x": 13.75, "y": 4, "w": 1.25} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,17 @@ | |||
/* Copyright 2021 Mechlovin' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "jay60.h" |
@ -0,0 +1,41 @@ | |||
/* Copyright 2021 Mechlovin' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT_all( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ | |||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ | |||
K40, K41, K42, K46, K4A, K4B, K4C, K4D \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ | |||
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ | |||
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }, \ | |||
} |
@ -0,0 +1,36 @@ | |||
/* Copyright 2021 Mechlovin' Studio | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
#define LT1_CAP LT(1, KC_CAPS) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_all( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, TO(1), | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL | |||
), | |||
[1] = LAYOUT_all( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT, | |||
_______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for common60 |
@ -0,0 +1,50 @@ | |||
/* Copyright 2020 Mechlovin' | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
#define LT1_CAP LT(1, KC_CAPS) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_all( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
LT1_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, TO(1), | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL | |||
), | |||
[1] = LAYOUT_all( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PENT, | |||
_______, _______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P1, KC_P2, KC_P3, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[2] = LAYOUT_all( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[3] = LAYOUT_all( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,26 @@ | |||
# jay60 | |||
![jay60](https://i.imgur.com/FVg59LUl.png) | |||
Jay60 PCB, Unikorn PCB compatible | |||
* Keyboard Maintainer: [Mechlovin'](https://mechlovin.studio) | |||
* Hardware Supported: Jay60, Atmega32A | |||
* Hardware Availability: [Mechlovin'](https://mechlovin.studio) | |||
Make example for this keyboard (after setting up your build environment): | |||
make mechlovin/jay60:default | |||
Flashing example for this keyboard: | |||
make mechlovin/jay60:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader | |||
Enter the bootloader in 3 ways: | |||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | |||
* **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard | |||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available |
@ -0,0 +1,24 @@ | |||
# MCU name | |||
MCU = atmega32a | |||
# Processor frequency | |||
F_CPU = 16000000 | |||
# Bootloader selection | |||
BOOTLOADER = usbasploader | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output |