[Keyboard] infinity81 (#16387)

keyboards/ada/infinity81/config.h

@@ -0,0 +1,126 @@
+// Copyright 2022 peepeetee (@peepeetee)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xADA0
+#define PRODUCT_ID   0x0081
+#define DEVICE_VER   0x0001
+#define MANUFACTURER Ada
+#define PRODUCT      infinity81
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, F6, B7 }
+#define MATRIX_COL_PINS { D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F5, F1, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+#define RGB_DI_PIN D0
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 107
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/ada/infinity81/infinity81.c

@@ -0,0 +1,4 @@
+// Copyright 2022 peepeetee (@peepeetee)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "infinity81.h"

keyboards/ada/infinity81/infinity81.h

@@ -0,0 +1,30 @@
+// Copyright 2022 peepeetee (@peepeetee)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,             \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,       K413, K414, \
+	K500, K501, K502,             K505,                         K510, K511, K512, K513, K514  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, KC_NO }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  K401,  K402,  K403,  K404,  K405,  K406,  K407,  K408,  K409,  K410,  K411,  KC_NO, K413,  K414 }, \
+	{ K500,  K501,  K502,  KC_NO, KC_NO, K505,  KC_NO, KC_NO, KC_NO, KC_NO, K510,  K511,  K512,  K513,  K514 }  \
+}

keyboards/ada/infinity81/info.json

@@ -0,0 +1,92 @@
+{
+    "keyboard_name": "infinity81",
+    "url": "",
+    "maintainer": "qmk",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "K00 (B3,D1)", "x": 0, "y": 0 },
+                { "label": "K01 (B3,D2)", "x": 1.25, "y": 0 },
+                { "label": "K02 (B3,D3)", "x": 2.25, "y": 0 },
+                { "label": "K03 (B3,D5)", "x": 3.25, "y": 0 },
+                { "label": "K04 (B3,D4)", "x": 4.25, "y": 0 },
+                { "label": "K05 (B3,D6)", "x": 5.5, "y": 0 },
+                { "label": "K06 (B3,D7)", "x": 6.5, "y": 0 },
+                { "label": "K07 (B3,B4)", "x": 7.5, "y": 0 },
+                { "label": "K08 (B3,B5)", "x": 8.5, "y": 0 },
+                { "label": "K09 (B3,B6)", "x": 9.75, "y": 0 },
+                { "label": "K0A (B3,C6)", "x": 10.75, "y": 0 },
+                { "label": "K0B (B3,C7)", "x": 11.75, "y": 0 },
+                { "label": "K0C (B3,F5)", "x": 12.75, "y": 0 },
+                { "label": "K10 (B2,D1)", "x": 0, "y": 1.25 },
+                { "label": "K11 (B2,D2)", "x": 1, "y": 1.25 },
+                { "label": "K12 (B2,D3)", "x": 2, "y": 1.25 },
+                { "label": "K13 (B2,D5)", "x": 3, "y": 1.25 },
+                { "label": "K14 (B2,D4)", "x": 4, "y": 1.25 },
+                { "label": "K15 (B2,D6)", "x": 5, "y": 1.25 },
+                { "label": "K16 (B2,D7)", "x": 6, "y": 1.25 },
+                { "label": "K17 (B2,B4)", "x": 7, "y": 1.25 },
+                { "label": "K18 (B2,B5)", "x": 8, "y": 1.25 },
+                { "label": "K19 (B2,B6)", "x": 9, "y": 1.25 },
+                { "label": "K1A (B2,C6)", "x": 10, "y": 1.25 },
+                { "label": "K1B (B2,C7)", "x": 11, "y": 1.25 },
+                { "label": "K1C (B2,F5)", "x": 12, "y": 1.25 },
+                { "label": "K1D (B2,F1)", "x": 13, "y": 1.25, "w": 2 },
+                { "label": "K1E (B2,F4)", "x": 15, "y": 1.25 },
+                { "label": "K20 (B1,D1)", "x": 0, "y": 2.25, "w": 1.5 },
+                { "label": "K21 (B1,D2)", "x": 1.5, "y": 2.25 },
+                { "label": "K22 (B1,D3)", "x": 2.5, "y": 2.25 },
+                { "label": "K23 (B1,D5)", "x": 3.5, "y": 2.25 },
+                { "label": "K24 (B1,D4)", "x": 4.5, "y": 2.25 },
+                { "label": "K25 (B1,D6)", "x": 5.5, "y": 2.25 },
+                { "label": "K26 (B1,D7)", "x": 6.5, "y": 2.25 },
+                { "label": "K27 (B1,B4)", "x": 7.5, "y": 2.25 },
+                { "label": "K28 (B1,B5)", "x": 8.5, "y": 2.25 },
+                { "label": "K29 (B1,B6)", "x": 9.5, "y": 2.25 },
+                { "label": "K2A (B1,C6)", "x": 10.5, "y": 2.25 },
+                { "label": "K2B (B1,C7)", "x": 11.5, "y": 2.25 },
+                { "label": "K2C (B1,F5)", "x": 12.5, "y": 2.25 },
+                { "label": "K2D (B1,F1)", "x": 13.5, "y": 2.25, "w": 1.5 },
+                { "label": "K2E (B1,F4)", "x": 15, "y": 2.25 },
+                { "label": "K30 (B0,D1)", "x": 0, "y": 3.25, "w": 1.75 },
+                { "label": "K31 (B0,D2)", "x": 1.75, "y": 3.25 },
+                { "label": "K32 (B0,D3)", "x": 2.75, "y": 3.25 },
+                { "label": "K33 (B0,D5)", "x": 3.75, "y": 3.25 },
+                { "label": "K34 (B0,D4)", "x": 4.75, "y": 3.25 },
+                { "label": "K35 (B0,D6)", "x": 5.75, "y": 3.25 },
+                { "label": "K36 (B0,D7)", "x": 6.75, "y": 3.25 },
+                { "label": "K37 (B0,B4)", "x": 7.75, "y": 3.25 },
+                { "label": "K38 (B0,B5)", "x": 8.75, "y": 3.25 },
+                { "label": "K39 (B0,B6)", "x": 9.75, "y": 3.25 },
+                { "label": "K3A (B0,C6)", "x": 10.75, "y": 3.25 },
+                { "label": "K3B (B0,C7)", "x": 11.75, "y": 3.25 },
+                { "label": "K3D (B0,F1)", "x": 12.75, "y": 3.25, "w": 2.25 },
+                { "label": "K3E (B0,F4)", "x": 15, "y": 3.25 },
+                { "label": "K40 (F6,D1)", "x": 0, "y": 4.25, "w": 2.25 },
+                { "label": "K41 (F6,D2)", "x": 2.25, "y": 4.25 },
+                { "label": "K42 (F6,D3)", "x": 3.25, "y": 4.25 },
+                { "label": "K43 (F6,D5)", "x": 4.25, "y": 4.25 },
+                { "label": "K44 (F6,D4)", "x": 5.25, "y": 4.25 },
+                { "label": "K45 (F6,D6)", "x": 6.25, "y": 4.25 },
+                { "label": "K46 (F6,D7)", "x": 7.25, "y": 4.25 },
+                { "label": "K47 (F6,B4)", "x": 8.25, "y": 4.25 },
+                { "label": "K48 (F6,B5)", "x": 9.25, "y": 4.25 },
+                { "label": "K49 (F6,B6)", "x": 10.25, "y": 4.25 },
+                { "label": "K4A (F6,C6)", "x": 11.25, "y": 4.25 },
+                { "label": "K4B (F6,C7)", "x": 12.25, "y": 4.25, "w": 1.75 },
+                { "label": "K4D (F6,F1)", "x": 14, "y": 4.25 },
+                { "label": "K4E (F6,F4)", "x": 15, "y": 4.25 },
+                { "label": "K50 (B7,D1)", "x": 0, "y": 5.25, "w": 1.25 },
+                { "label": "K51 (B7,D2)", "x": 1.25, "y": 5.25, "w": 1.25 },
+                { "label": "K52 (B7,D3)", "x": 2.5, "y": 5.25, "w": 1.25 },
+                { "label": "K55 (B7,D6)", "x": 3.75, "y": 5.25, "w": 6.25 },
+                { "label": "K5A (B7,C6)", "x": 10, "y": 5.25, "w": 1.25 },
+                { "label": "K5B (B7,C7)", "x": 11.25, "y": 5.25, "w": 1.25 },
+                { "label": "K5C (B7,F5)", "x": 13, "y": 5.25 },
+                { "label": "K5D (B7,F1)", "x": 14, "y": 5.25 },
+                { "label": "K5E (B7,F4)", "x": 15, "y": 5.25 }
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}

keyboards/ada/infinity81/keymaps/default/keymap.c

@@ -0,0 +1,23 @@
+// Copyright 2022 peepeetee (@peepeetee)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, MO(1),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+    [1] = LAYOUT(
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+};

keyboards/ada/infinity81/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for infinity81

keyboards/ada/infinity81/readme.md

@@ -0,0 +1,27 @@
+# infinity81
+
+![infinity81](https://i.imgur.com/9d6IcuA.jpg)
+
+A per key RGB 75% with blocker keyboard
+
+* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
+* Hardware Supported: infinity81
+* Hardware Availability: no longer avaliable - future groupbuy possible
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ada/infinity81:default
+
+Flashing example for this keyboard:
+
+    make ada/infinity81:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/ada/infinity81/rules.mk

@@ -0,0 +1,18 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output