diff --git a/keyboards/handwired/dactyl_manuform/4x5/readme.md b/keyboards/handwired/dactyl_manuform/4x5/readme.md
deleted file mode 100644
index aab792f2249..00000000000
--- a/keyboards/handwired/dactyl_manuform/4x5/readme.md
+++ /dev/null
@@ -1,161 +0,0 @@
-Dactyl Manuform 4x5
-======
-the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
-![Imgur](https://i.imgur.com/7y0Vbyd.jpg)
-
-
-## First Time Setup
-
-Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
-
-```
-$ make handwired/dactyl_manuform/4x5:dvorak
-```
-
-You will see a lot of output and if everything worked correctly you will see the built hex file:
-
-```
-dactyl_manuform_4x5_dvorak.hex
-```
-
-If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so:
-
-```
-$ make handwired/dactyl_manuform/4x5:YOUR_KEYMAP_NAME
-```
-
-If everything worked correctly you will see a file:
-
-```
-dactyl_manuform_4x5_YOUR_KEYMAP_NAME.hex
-```
-
-For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
-
-## Keymaps
-Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap.
-### Qwerty and Dvorak
-Qwerty base layer:
-![Imgur](https://i.imgur.com/Yb5e7dS.png)
-Dvorak base layer:
-![Imgur](https://i.imgur.com/CpuZptB.png)
-Both keymaps have the same Raise and Lower layers:
-Raise Layer
-![Imgur](https://i.imgur.com/nOqePK5.png)
-Lower Layer
-![Imgur](https://i.imgur.com/WSshkYc.png)
-
-Required Hardware
------------------
-
-Apart from diodes and key switches for the keyboard matrix in each half, you
-will need:
-
-* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
-* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
-
-Alternatively, you can use any sort of cable and socket that has at least 3
-wires. If you want to use I2C to communicate between halves, you will need a
-cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
-
-Optional Hardware
------------------
-A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
-
-Wiring
-------
-
-The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
-PD0 on the ATmega32u4) between the two Pro Micros.
-
-Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
-and modify the `matrix.c` accordingly.
-
-The wiring for serial:
-
-![serial wiring](https://i.imgur.com/C3D1GAQ.png)
-
-The wiring for i2c:
-
-![i2c wiring](https://i.imgur.com/Hbzhc6E.png)
-
-The pull-up resistors may be placed on either half. It is also possible
-to use 4 resistors and have the pull-ups in both halves, but this is
-unnecessary in simple use cases.
-
-You can change your configuration between serial and i2c by modifying your `config.h` file.
-
-Notes on Software Configuration
--------------------------------
-
-the keymaps in here are for the 4x5 layout of the keyboard only.
-
-Flashing
--------
-From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing.
-Example: `make lets_split/rev2:default:avrdude`
-
-
-Choosing which board to plug the USB cable into (choosing Master)
---------
-Because the two boards are identical, the firmware has logic to differentiate the left and right board.
-
-It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
-
-The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
-
-The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
-
-### Setting the left hand as master
-If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
-
-### Setting the right hand as master
-If you always plug the usb cable into the right board, add an extra flag to your `config.h`
-```
- #define MASTER_RIGHT
-```
-
-### Setting EE_hands to use either hands as master
-If you define `EE_HANDS` in your `config.h`, you will need to set the
-EEPROM for the left and right halves.
-
-The EEPROM is used to store whether the
-half is left handed or right handed. This makes it so that the same firmware
-file will run on both hands instead of having to flash left and right handed
-versions of the firmware to each half. To flash the EEPROM file for the left
-half run:
-```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
-// or the equivalent in dfu-programmer
-
-```
-and similarly for right half
-```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
-// or the equivalent in dfu-programmer
-```
-
-NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
-
-After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
-
-Note that you need to program both halves, but you have the option of using
-different keymaps for each half. You could program the left half with a QWERTY
-layout and the right half with a Colemak layout using bootmagic's default layout option.
-Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
-right half is connected.
-
-
-Notes on Using Pro Micro 3.3V
------------------------------
-
-Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
-the frequency on the 3.3V board.
-
-Also, if the slave board is producing weird characters in certain columns,
-update the following line in `matrix.c` to the following:
-
-```
-// _delay_us(30);  // without this wait read unstable value.
-_delay_us(300);  // without this wait read unstable value.
-```
diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c
index d0bcbd4e6b1..7be6a5bc71e 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c
+++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/default/keymap.c
@@ -1,27 +1,13 @@
-#include QMK_KEYBOARD_H
+/* A standard layout for the Dactyl Manuform 5x6 Keyboard */ 
 
+#include QMK_KEYBOARD_H
 
 extern keymap_config_t keymap_config;
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
 #define _QWERTY 0
 #define _LOWER 1
 #define _RAISE 2
 
-#define SFT_ESC  SFT_T(KC_ESC)
-#define CTL_BSPC CTL_T(KC_BSPC)
-#define ALT_SPC  ALT_T(KC_SPC)
-#define SFT_ENT  SFT_T(KC_ENT)
-
-#define KC_ML KC_MS_LEFT
-#define KC_MR KC_MS_RIGHT
-#define KC_MU KC_MS_UP
-#define KC_MD KC_MS_DOWN
-#define KC_MB1 KC_MS_BTN1
-#define KC_MB2 KC_MS_BTN1
 #define RAISE MO(_RAISE)
 #define LOWER MO(_LOWER)
 
@@ -31,8 +17,6 @@ extern keymap_config_t keymap_config;
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-
-
   [_QWERTY] = LAYOUT_5x6(
      KC_ESC , KC_1  , KC_2  , KC_3  , KC_4  , KC_5  ,                         KC_6  , KC_7  , KC_8  , KC_9  , KC_0  ,KC_BSPC,
      KC_TAB , KC_Q  , KC_W  , KC_E  , KC_R  , KC_T  ,                         KC_Y  , KC_U  , KC_I  , KC_O  , KC_P  ,KC_MINS,
@@ -54,7 +38,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                              _______,_______,            _______,_______,
                                              _______,_______,            _______,_______,
                                              _______,_______,            _______,_______
-),
+
+  ),
 
   [_RAISE] = LAYOUT_5x6(
        KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 ,                        KC_F6  , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
@@ -66,6 +51,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                _______,_______,            _______,_______,
                                                _______,_______,            _______,_______
   ),
+};
 
-  };
 
diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c
index 0282ccc7f92..9a89212fec5 100644
--- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c
+++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/impstyle/keymap.c
@@ -1,26 +1,14 @@
+
+/* A QWERTY 3 Layer layout for the Dactyl Manuform 5x6 Keyboard */ 
+
 #include QMK_KEYBOARD_H
 
 extern keymap_config_t keymap_config;
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
 #define _QWERTY 0
 #define _LOWER 1
 #define _RAISE 2
 
-#define SFT_ESC  SFT_T(KC_ESC)
-#define CTL_BSPC CTL_T(KC_BSPC)
-#define ALT_SPC  ALT_T(KC_SPC)
-#define SFT_ENT  SFT_T(KC_ENT)
-
-#define KC_ML KC_MS_LEFT
-#define KC_MR KC_MS_RIGHT
-#define KC_MU KC_MS_UP
-#define KC_MD KC_MS_DOWN
-#define KC_MB1 KC_MS_BTN1
-#define KC_MB2 KC_MS_BTN1
 #define RAISE MO(_RAISE)
 #define LOWER MO(_LOWER)
 
@@ -37,11 +25,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      KC_LSFT, KC_A  , KC_S  , KC_D  , KC_F  , KC_G  ,                         KC_H  , KC_J  , KC_K  , KC_L  ,KC_SCLN,KC_QUOT,
      KC_LCTL, KC_Z  , KC_X  , KC_C  , KC_V  , KC_B  ,                         KC_N  , KC_M  ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
                       KC_LBRC,KC_RBRC,                                                       KC_PLUS, KC_EQL,
-                                      RAISE,KC_SPC,                        KC_ENT, LOWER,
+                                      RAISE,KC_SPC,                           KC_ENT, LOWER,
                                       KC_TAB,KC_HOME,                         KC_END,  KC_DEL,
-                                      KC_BSPC, KC_GRV,                        KC_LGUI, KC_LALT
+                                      KC_BSPC,KC_GRV,                         KC_LGUI, KC_LALT
   ),
 
+
   [_LOWER] = LAYOUT_5x6(
      KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC,                        KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
      _______,_______,_______,_______,_______,KC_LBRC,                        KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
@@ -51,23 +40,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                              _______,_______,            _______,_______,
                                              _______,_______,            _______,_______,
                                              _______,_______,            _______,_______
+
 ),
 
   [_RAISE] = LAYOUT_5x6(
-       KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 ,                        KC_F6  , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
-       _______,_______,_______,_______,_______,KC_LBRC,                        KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE,
-       _______,KC_LEFT,KC_UP  ,KC_DOWN,KC_RGHT,KC_LPRN,                        KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,
-       _______,_______,_______,_______,_______,_______,                        _______,_______,_______,_______,_______,KC_VOLD,
-                                               _______,_______,            KC_EQL ,_______,
-                                               _______,_______,            _______,_______,
-                                               _______,_______,            _______,_______,
-                                               _______,_______,            _______,_______
+     KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 ,                         KC_F6  , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
+     _______,_______,_______,_______,_______,KC_LBRC,                         KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE,
+     _______,KC_LEFT,KC_UP  ,KC_DOWN,KC_RGHT,KC_LPRN,                         KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,
+     _______,_______,_______,_______,_______,_______,                         _______,_______,_______,_______,_______,KC_VOLD,
+                                     _______,_______,                         KC_EQL ,_______,
+                                     _______,_______,                         _______,_______,
+                                     _______,_______,                         _______,_______,
+                                     _______,_______,                         _______,_______
   ),
 
   };
-
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
diff --git a/keyboards/handwired/dactyl_manuform/5x6/readme.md b/keyboards/handwired/dactyl_manuform/5x6/readme.md
deleted file mode 100644
index eb76a7150e4..00000000000
--- a/keyboards/handwired/dactyl_manuform/5x6/readme.md
+++ /dev/null
@@ -1,142 +0,0 @@
-Dactyl Manuform 5x6
-======
-the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
-![Imgur](https://i.imgur.com/7y0Vbyd.jpg)
-
-
-## First Time Setup
-
-Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
-
-```
-$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME
-```
-
-If everything worked correctly you will see a file:
-
-```
-dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex
-```
-
-For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
-
-## Keymaps
-Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap.
-### Impstyle
-
-
-
-Required Hardware
------------------
-
-Apart from diodes and key switches for the keyboard matrix in each half, you
-will need:
-
-* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
-* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
-
-Alternatively, you can use any sort of cable and socket that has at least 3
-wires. If you want to use I2C to communicate between halves, you will need a
-cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
-
-Optional Hardware
------------------
-A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
-
-Wiring
-------
-
-The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
-PD0 on the ATmega32u4) between the two Pro Micros.
-
-Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
-and modify the `matrix.c` accordingly.
-
-The wiring for serial:
-
-![serial wiring](https://i.imgur.com/C3D1GAQ.png)
-
-The wiring for i2c:
-
-![i2c wiring](https://i.imgur.com/Hbzhc6E.png)
-
-The pull-up resistors may be placed on either half. It is also possible
-to use 4 resistors and have the pull-ups in both halves, but this is
-unnecessary in simple use cases.
-
-You can change your configuration between serial and i2c by modifying your `config.h` file.
-
-Notes on Software Configuration
--------------------------------
-
-the keymaps in here are for the 4x5 layout of the keyboard only.
-
-Flashing
--------
-From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing.
-Example: `make lets_split/rev2:default:avrdude`
-
-
-Choosing which board to plug the USB cable into (choosing Master)
---------
-Because the two boards are identical, the firmware has logic to differentiate the left and right board.
-
-It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
-
-The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
-
-The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
-
-### Setting the left hand as master
-If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
-
-### Setting the right hand as master
-If you always plug the usb cable into the right board, add an extra flag to your `config.h`
-```
- #define MASTER_RIGHT
-```
-
-### Setting EE_hands to use either hands as master
-If you define `EE_HANDS` in your `config.h`, you will need to set the
-EEPROM for the left and right halves.
-
-The EEPROM is used to store whether the
-half is left handed or right handed. This makes it so that the same firmware
-file will run on both hands instead of having to flash left and right handed
-versions of the firmware to each half. To flash the EEPROM file for the left
-half run:
-```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
-// or the equivalent in dfu-programmer
-
-```
-and similarly for right half
-```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
-// or the equivalent in dfu-programmer
-```
-
-NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
-
-After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
-
-Note that you need to program both halves, but you have the option of using
-different keymaps for each half. You could program the left half with a QWERTY
-layout and the right half with a Colemak layout using bootmagic's default layout option.
-Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
-right half is connected.
-
-
-Notes on Using Pro Micro 3.3V
------------------------------
-
-Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
-the frequency on the 3.3V board.
-
-Also, if the slave board is producing weird characters in certain columns,
-update the following line in `matrix.c` to the following:
-
-```
-// _delay_us(30);  // without this wait read unstable value.
-_delay_us(300);  // without this wait read unstable value.
-```
diff --git a/keyboards/handwired/dactyl_manuform/6x6/6x6.c b/keyboards/handwired/dactyl_manuform/6x6/6x6.c
new file mode 100644
index 00000000000..9eb27531a8b
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/6x6/6x6.c
@@ -0,0 +1,23 @@
+#include "6x6.h"
+
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+
diff --git a/keyboards/handwired/dactyl_manuform/6x6/6x6.h b/keyboards/handwired/dactyl_manuform/6x6/6x6.h
new file mode 100644
index 00000000000..c2980b3d318
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/6x6/6x6.h
@@ -0,0 +1,44 @@
+#pragma once
+
+#include "dactyl_manuform.h"
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+#define LAYOUT_6x6(\
+	L00, L01, L02, L03, L04, L05,                    R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15,                    R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25,                    R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35,                    R30, R31, R32, R33, R34, R35, \
+	L40, L41, L42, L43, L44, L45,                    R40, R41, R42, R43, R44, R45, \
+		          L52, L53,                                        R52, R53,       \
+                        L54, L55,                    R50, R51,                \
+                        L64, L65,                    R60, R61,                \
+              L62, L63,                                        R62, R63       \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ L40, L41, L42, L43, L44, L45 }, \
+		{ KC_NO, KC_NO, L52, L53, L54, L55 }, \
+		{ KC_NO, KC_NO, L62, L63, L64, L65 }, \
+\
+		{ R00, R01, R02, R03, R04, R05 },    \
+		{ R10, R11, R12, R13, R14, R15 },    \
+		{ R20, R21, R22, R23, R24, R25 },    \
+		{ R30, R31, R32, R33, R34, R35 },    \
+		{ R40, R41, R42, R43, R44, R45 },    \
+		{ R50, R51, R52, R53, KC_NO, KC_NO },\
+		{ R60, R61, R62, R63, KC_NO, KC_NO }, \
+   }
+
+
diff --git a/keyboards/handwired/dactyl_manuform/6x6/config.h b/keyboards/handwired/dactyl_manuform/6x6/config.h
new file mode 100644
index 00000000000..9bb7b07bf2d
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/6x6/config.h
@@ -0,0 +1,33 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+
+#define PRODUCT         Dactyl-Manuform (6x6)
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 14
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
+#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 }
diff --git a/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h
new file mode 100644
index 00000000000..29ab59ad66b
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/config.h
@@ -0,0 +1,27 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#pragma once
+
+
+#define USE_SERIAL
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+//#define EE_HANDS
+// Rows are doubled-up
diff --git a/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c
new file mode 100644
index 00000000000..1b1cbd4aea2
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/6x6/keymaps/default/keymap.c
@@ -0,0 +1,57 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_6x6(
+
+     KC_F1  , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 ,                         KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,
+     KC_ESC , KC_1  , KC_2  , KC_3  , KC_4  , KC_5  ,                         KC_6  , KC_7  , KC_8  , KC_9  , KC_0  ,KC_BSPC,
+     KC_TAB , KC_Q  , KC_W  , KC_E  , KC_R  , KC_T  ,                         KC_Y  , KC_U  , KC_I  , KC_O  , KC_P  ,KC_MINS,
+     KC_LSFT, KC_A  , KC_S  , KC_D  , KC_F  , KC_G  ,                         KC_H  , KC_J  , KC_K  , KC_L  ,KC_SCLN,KC_QUOT,
+     KC_LCTL, KC_Z  , KC_X  , KC_C  , KC_V  , KC_B  ,                         KC_N  , KC_M  ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH,
+                      KC_LBRC,KC_RBRC,                                                       KC_PLUS, KC_EQL,
+                                      RAISE,KC_SPC,                        KC_ENT, LOWER,
+                                      KC_TAB,KC_HOME,                         KC_END,  KC_DEL,
+                                      KC_BSPC, KC_GRV,                        KC_LGUI, KC_LALT
+  ),
+
+  [_LOWER] = LAYOUT_6x6(
+
+     KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6  ,                         KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,
+     KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC,                        KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
+     _______,_______,_______,_______,_______,KC_LBRC,                        KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
+     _______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN,                        KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
+     _______,_______,_______,_______,_______,_______,                        _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS,
+                                             _______,KC_PSCR,            _______, KC_P0,
+                                             _______,_______,            _______,_______,
+                                             _______,_______,            _______,_______,
+                                             _______,_______,            _______,_______
+  ),
+
+  [_RAISE] = LAYOUT_6x6(
+
+       KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 ,                        KC_F6  , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
+       _______,_______,_______,_______,_______,KC_LBRC,                        KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE,
+       _______,KC_LEFT,KC_UP  ,KC_DOWN,KC_RGHT,KC_LPRN,                        KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,
+       _______,_______,_______,_______,_______,_______,                        _______,_______,_______,_______,_______,KC_VOLD,
+       _______,_______,_______,_______,_______,_______,                        _______,_______,_______,_______,_______,_______,
+
+                                               _______,_______,            KC_EQL ,_______,
+                                               _______,_______,            _______,_______,
+                                               _______,_______,            _______,_______,
+                                               _______,_______,            _______,_______
+  ),
+
+};
+
diff --git a/keyboards/handwired/dactyl_manuform/6x6/rules.mk b/keyboards/handwired/dactyl_manuform/6x6/rules.mk
new file mode 100644
index 00000000000..14b6e1e4e31
--- /dev/null
+++ b/keyboards/handwired/dactyl_manuform/6x6/rules.mk
@@ -0,0 +1,21 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
diff --git a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h
index 6c23e9143dd..3222e6a617d 100644
--- a/keyboards/handwired/dactyl_manuform/dactyl_manuform.h
+++ b/keyboards/handwired/dactyl_manuform/dactyl_manuform.h
@@ -1,7 +1,10 @@
 #pragma once
 
 
-#ifdef KEYBOARD_handwired_dactyl_manuform_5x6
+
+#ifdef KEYBOARD_handwired_dactyl_manuform_6x6
+    #include "6x6.h"
+#elif KEYBOARD_handwired_dactyl_manuform_5x6
     #include "5x6.h"
 #elif KEYBOARD_handwired_dactyl_manuform_4x5
     #include "4x5.h"
diff --git a/keyboards/handwired/dactyl_manuform/readme.md b/keyboards/handwired/dactyl_manuform/readme.md
index eb76a7150e4..3f72bd6b213 100644
--- a/keyboards/handwired/dactyl_manuform/readme.md
+++ b/keyboards/handwired/dactyl_manuform/readme.md
@@ -1,32 +1,55 @@
-Dactyl Manuform 5x6
+Dactyl Manuform (4x5, 5x6, 6x6)
 ======
 the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
 ![Imgur](https://i.imgur.com/7y0Vbyd.jpg)
 
 
 ## First Time Setup
-
+-----------------
 Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
 
+Depending on your Layout chose one of the follwing commands:
+
 ```
-$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME
+$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME
+```
+
+example:
+```
+$ make handwired/dactyl_manuform/4x5:default
 ```
 
 If everything worked correctly you will see a file:
 
 ```
-dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex
+dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex
 ```
 
 For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
 
+
 ## Keymaps
-Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap.
-### Impstyle
+-----------------
+### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/)
+
+#### Default
+Simple QWERTY layout with 3 Layers.
+#### Dvorak
+
+### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/)
 
+#### Default
+Just a copy of the Impstyle keymap. Feel free to adjust it.
 
+#### Impstyle
+A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master.
 
-Required Hardware
+### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/)
+
+#### Default
+Simple QWERTY layout with 3 Layers.
+
+##Required Hardware
 -----------------
 
 Apart from diodes and key switches for the keyboard matrix in each half, you
@@ -39,11 +62,11 @@ Alternatively, you can use any sort of cable and socket that has at least 3
 wires. If you want to use I2C to communicate between halves, you will need a
 cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
 
-Optional Hardware
+##Optional Hardware
 -----------------
 A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
 
-Wiring
+##Wiring
 ------
 
 The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
@@ -66,18 +89,18 @@ unnecessary in simple use cases.
 
 You can change your configuration between serial and i2c by modifying your `config.h` file.
 
-Notes on Software Configuration
+##Notes on Software Configuration
 -------------------------------
 
 the keymaps in here are for the 4x5 layout of the keyboard only.
 
-Flashing
+##Flashing
 -------
-From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing.
-Example: `make lets_split/rev2:default:avrdude`
+
+To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing)
 
 
-Choosing which board to plug the USB cable into (choosing Master)
+##Choosing which board to plug the USB cable into (choosing Master)
 --------
 Because the two boards are identical, the firmware has logic to differentiate the left and right board.