Browse Source

Refactor `quantum/command.{c,h}` for code size & {read,maintain}ability (#11842)

* quantum/command.c: coalesce `print()`s in `command_common_help()` & `print_version()`

Also undo some damage by clang-format in b624f32f94

* quantum/command.c: replace `print(…); print_{,val_}{dec,hex}*(…);` sequences with single `xprintf(…)`

`print_{dec,hex}*(…)` are just `#define`s for `xprintf(…)` anyway.

Each additional `xprintf(…)` costs ~8 bytes: the call instructions,
plus an additional NUL terminator.

This _really_ adds up: this commit saves 814 bytes on my ATmega32.

* quantum/command.c: optimise `mousekey_console()` for size & legibility

Made various tweaks to the interface, but still functionally identical.

Assume `KC_1`…`KC_0` to be contiguous, and removed `numkey2num(…)` entirely.
It was exported in `command.h` by 1a0bac8bcc for no obvious reason, before
which it was `static`. I doubt anyone uses it.

`mousekey_console()` is now enabled regardless of `MK_3_SPEED`.
Needs fleshing out for things other than the X11 variant though.

This commit saves 638 bytes on my ATmega32.
pull/13913/head
Liyang HU 2 years ago
committed by GitHub
parent
commit
383fae55c5
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 277 additions and 317 deletions
  1. +276
    -315
      quantum/command.c
  2. +1
    -2
      quantum/command.h

+ 276
- 315
quantum/command.c View File

@ -55,7 +55,6 @@ static bool command_console(uint8_t code);
static void command_console_help(void);
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
static bool mousekey_console(uint8_t code);
static void mousekey_console_help(void);
#endif
static void switch_default_layer(uint8_t layer);
@ -103,190 +102,220 @@ bool command_console_extra(uint8_t code) {
/***********************************************************
* Command common
***********************************************************/
static void command_common_help(void) {
print("\n\t- Magic -\n" STR(MAGIC_KEY_DEBUG) ": Debug Message Toggle\n" STR(MAGIC_KEY_DEBUG_MATRIX) ": Matrix Debug Mode Toggle - Show keypresses in matrix grid\n" STR(MAGIC_KEY_DEBUG_KBD) ": Keyboard Debug Toggle - Show keypress report\n" STR(MAGIC_KEY_DEBUG_MOUSE) ": Debug Mouse Toggle\n" STR(MAGIC_KEY_VERSION) ": Version\n" STR(MAGIC_KEY_STATUS) ": Status\n" STR(MAGIC_KEY_CONSOLE) ": Activate Console Mode\n"
print(/* clang-format off */
"\n\t- Magic -\n"
STR(MAGIC_KEY_DEBUG) ": Debug Message Toggle\n"
STR(MAGIC_KEY_DEBUG_MATRIX) ": Matrix Debug Mode Toggle"
" - Show keypresses in matrix grid\n"
STR(MAGIC_KEY_DEBUG_KBD) ": Keyboard Debug Toggle"
" - Show keypress report\n"
STR(MAGIC_KEY_DEBUG_MOUSE) ": Debug Mouse Toggle\n"
STR(MAGIC_KEY_VERSION) ": Version\n"
STR(MAGIC_KEY_STATUS) ": Status\n"
STR(MAGIC_KEY_CONSOLE) ": Activate Console Mode\n"
#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
STR(MAGIC_KEY_LAYER0) ": Switch to Layer 0\n" STR(MAGIC_KEY_LAYER1) ": Switch to Layer 1\n" STR(MAGIC_KEY_LAYER2) ": Switch to Layer 2\n" STR(MAGIC_KEY_LAYER3) ": Switch to Layer 3\n" STR(MAGIC_KEY_LAYER4) ": Switch to Layer 4\n" STR(MAGIC_KEY_LAYER5) ": Switch to Layer 5\n" STR(MAGIC_KEY_LAYER6) ": Switch to Layer 6\n" STR(MAGIC_KEY_LAYER7) ": Switch to Layer 7\n" STR(MAGIC_KEY_LAYER8) ": Switch to Layer 8\n" STR(MAGIC_KEY_LAYER9) ": Switch to Layer 9\n"
STR(MAGIC_KEY_LAYER0) ": Switch to Layer 0\n"
STR(MAGIC_KEY_LAYER1) ": Switch to Layer 1\n"
STR(MAGIC_KEY_LAYER2) ": Switch to Layer 2\n"
STR(MAGIC_KEY_LAYER3) ": Switch to Layer 3\n"
STR(MAGIC_KEY_LAYER4) ": Switch to Layer 4\n"
STR(MAGIC_KEY_LAYER5) ": Switch to Layer 5\n"
STR(MAGIC_KEY_LAYER6) ": Switch to Layer 6\n"
STR(MAGIC_KEY_LAYER7) ": Switch to Layer 7\n"
STR(MAGIC_KEY_LAYER8) ": Switch to Layer 8\n"
STR(MAGIC_KEY_LAYER9) ": Switch to Layer 9\n"
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
"F1-F10: Switch to Layer 0-9 (F10 = L0)\n"
"F1-F10: Switch to Layer 0-9 (F10 = L0)\n"
#endif
#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
"0-9: Switch to Layer 0-9\n"
"0-9: Switch to Layer 0-9\n"
#endif
STR(MAGIC_KEY_LAYER0_ALT) ": Switch to Layer 0 (alternate)\n"
STR(MAGIC_KEY_LAYER0_ALT) ": Switch to Layer 0 (alternate)\n"
STR(MAGIC_KEY_BOOTLOADER) ": Jump to Bootloader\n" STR(MAGIC_KEY_BOOTLOADER_ALT) ": Jump to Bootloader (alternate)\n"
STR(MAGIC_KEY_BOOTLOADER) ": Jump to Bootloader\n"
STR(MAGIC_KEY_BOOTLOADER_ALT) ": Jump to Bootloader (alternate)\n"
#ifdef KEYBOARD_LOCK_ENABLE
STR(MAGIC_KEY_LOCK) ": Lock Keyboard\n"
STR(MAGIC_KEY_LOCK) ": Lock Keyboard\n"
#endif
STR(MAGIC_KEY_EEPROM) ": Print EEPROM Settings\n" STR(MAGIC_KEY_EEPROM_CLEAR) ": Clear EEPROM\n"
STR(MAGIC_KEY_EEPROM) ": Print EEPROM Settings\n"
STR(MAGIC_KEY_EEPROM_CLEAR) ": Clear EEPROM\n"
#ifdef NKRO_ENABLE
STR(MAGIC_KEY_NKRO) ": NKRO Toggle\n"
STR(MAGIC_KEY_NKRO) ": NKRO Toggle\n"
#endif
#ifdef SLEEP_LED_ENABLE
STR(MAGIC_KEY_SLEEP_LED) ": Sleep LED Test\n"
STR(MAGIC_KEY_SLEEP_LED) ": Sleep LED Test\n"
#endif
);
); /* clang-format on */
}
static void print_version(void) {
// print version & information
print("\n\t- Version -\n");
print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
"PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
"VER: " STR(DEVICE_VER) "\n");
print("BUILD: (" __DATE__ ")\n");
print(/* clang-format off */
"\n\t- Version -\n"
"VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
"PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
"VER: " STR(DEVICE_VER) "\n"
"BUILD: (" __DATE__ ")\n"
#ifndef SKIP_VERSION
# ifdef PROTOCOL_CHIBIOS
print("CHIBIOS: " STR(CHIBIOS_VERSION) ", CONTRIB: " STR(CHIBIOS_CONTRIB_VERSION) "\n");
"CHIBIOS: " STR(CHIBIOS_VERSION)
", CONTRIB: " STR(CHIBIOS_CONTRIB_VERSION) "\n"
# endif
#endif
/* build options */
print("OPTIONS:"
"OPTIONS:"
#ifdef PROTOCOL_LUFA
" LUFA"
" LUFA"
#endif
#ifdef PROTOCOL_VUSB
" VUSB"
" VUSB"
#endif
#ifdef BOOTMAGIC_ENABLE
" BOOTMAGIC"
" BOOTMAGIC"
#endif
#ifdef MOUSEKEY_ENABLE
" MOUSEKEY"
" MOUSEKEY"
#endif
#ifdef EXTRAKEY_ENABLE
" EXTRAKEY"
" EXTRAKEY"
#endif
#ifdef CONSOLE_ENABLE
" CONSOLE"
" CONSOLE"
#endif
#ifdef COMMAND_ENABLE
" COMMAND"
" COMMAND"
#endif
#ifdef NKRO_ENABLE
" NKRO"
" NKRO"
#endif
#ifdef LTO_ENABLE
" LTO"
" LTO"
#endif
" " STR(BOOTLOADER_SIZE) "\n");
" " STR(BOOTLOADER_SIZE) "\n"
print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__)
"GCC: " STR(__GNUC__)
"." STR(__GNUC_MINOR__)
"." STR(__GNUC_PATCHLEVEL__)
#if defined(__AVR__)
" AVR-LIBC: " __AVR_LIBC_VERSION_STRING__ " AVR_ARCH: avr" STR(__AVR_ARCH__)
" AVR-LIBC: " __AVR_LIBC_VERSION_STRING__
" AVR_ARCH: avr" STR(__AVR_ARCH__)
#endif
"\n");
return;
"\n"
); /* clang-format on */
}
static void print_status(void) {
print("\n\t- Status -\n");
xprintf(/* clang-format off */
"\n\t- Status -\n"
"host_keyboard_leds(): %02X\n"
#ifndef PROTOCOL_VUSB
"keyboard_protocol: %02X\n"
"keyboard_idle: %02X\n"
#endif
#ifdef NKRO_ENABLE
"keymap_config.nkro: %02X\n"
#endif
"timer_read32(): %08lX\n"
print_val_hex8(host_keyboard_leds());
, host_keyboard_leds()
#ifndef PROTOCOL_VUSB
// these aren't set on the V-USB protocol, so we just ignore them for now
print_val_hex8(keyboard_protocol);
print_val_hex8(keyboard_idle);
/* these aren't set on the V-USB protocol, so we just ignore them for now */
, keyboard_protocol
, keyboard_idle
#endif
#ifdef NKRO_ENABLE
print_val_hex8(keymap_config.nkro);
, keymap_config.nkro
#endif
print_val_hex32(timer_read32());
return;
, timer_read32()
); /* clang-format on */
}
static void print_eeconfig(void) {
// Print these variables if NO_PRINT or USER_PRINT are not defined.
#if !defined(NO_PRINT) && !defined(USER_PRINT)
print("default_layer: ");
print_dec(eeconfig_read_default_layer());
print("\n");
static void print_eeconfig(void) {
xprintf("eeconfig:\ndefault_layer: %u\n", eeconfig_read_default_layer());
debug_config_t dc;
dc.raw = eeconfig_read_debug();
print("debug_config.raw: ");
print_hex8(dc.raw);
print("\n");
print(".enable: ");
print_dec(dc.enable);
print("\n");
print(".matrix: ");
print_dec(dc.matrix);
print("\n");
print(".keyboard: ");
print_dec(dc.keyboard);
print("\n");
print(".mouse: ");
print_dec(dc.mouse);
print("\n");
xprintf(/* clang-format off */
"debug_config.raw: %02X\n"
".enable: %u\n"
".matrix: %u\n"
".keyboard: %u\n"
".mouse: %u\n"
, dc.raw
, dc.enable
, dc.matrix
, dc.keyboard
, dc.mouse
); /* clang-format on */
keymap_config_t kc;
kc.raw = eeconfig_read_keymap();
print("keymap_config.raw: ");
print_hex8(kc.raw);
print("\n");
print(".swap_control_capslock: ");
print_dec(kc.swap_control_capslock);
print("\n");
print(".capslock_to_control: ");
print_dec(kc.capslock_to_control);
print("\n");
print(".swap_lctl_lgui: ");
print_dec(kc.swap_lctl_lgui);
print("\n");
print(".swap_rctl_rgui: ");
print_dec(kc.swap_rctl_rgui);
print("\n");
print(".swap_lalt_lgui: ");
print_dec(kc.swap_lalt_lgui);
print("\n");
print(".swap_ralt_rgui: ");
print_dec(kc.swap_ralt_rgui);
print("\n");
print(".no_gui: ");
print_dec(kc.no_gui);
print("\n");
print(".swap_grave_esc: ");
print_dec(kc.swap_grave_esc);
print("\n");
print(".swap_backslash_backspace: ");
print_dec(kc.swap_backslash_backspace);
print("\n");
print(".nkro: ");
print_dec(kc.nkro);
print("\n");
xprintf(/* clang-format off */
"keymap_config.raw: %02X\n"
".swap_control_capslock: %u\n"
".capslock_to_control: %u\n"
".swap_lctl_lgui: %u\n"
".swap_rctl_rgui: %u\n"
".swap_lalt_lgui: %u\n"
".swap_ralt_rgui: %u\n"
".no_gui: %u\n"
".swap_grave_esc: %u\n"
".swap_backslash_backspace: %u\n"
".nkro: %u\n"
, kc.raw
, kc.swap_control_capslock
, kc.capslock_to_control
, kc.swap_lctl_lgui
, kc.swap_rctl_rgui
, kc.swap_lalt_lgui
, kc.swap_ralt_rgui
, kc.no_gui
, kc.swap_grave_esc
, kc.swap_backslash_backspace
, kc.nkro
); /* clang-format on */
# ifdef BACKLIGHT_ENABLE
backlight_config_t bc;
bc.raw = eeconfig_read_backlight();
print("backlight_config.raw: ");
print_hex8(bc.raw);
print("\n");
print(".enable: ");
print_dec(bc.enable);
print("\n");
print(".level: ");
print_dec(bc.level);
print("\n");
# endif /* BACKLIGHT_ENABLE */
xprintf(/* clang-format off */
"backlight_config"
".raw: %02X\n"
".enable: %u\n"
".level: %u\n"
, bc.raw
, bc.enable
, bc.level
#endif /* !NO_PRINT */
); /* clang-format on */
# endif /* BACKLIGHT_ENABLE */
}
#endif /* !NO_PRINT && !USER_PRINT */
static bool command_common(uint8_t code) {
#ifdef KEYBOARD_LOCK_ENABLE
@ -306,8 +335,9 @@ static bool command_common(uint8_t code) {
// print stored eeprom config
case MAGIC_KC(MAGIC_KEY_EEPROM):
print("eeconfig:\n");
#if !defined(NO_PRINT) && !defined(USER_PRINT)
print_eeconfig();
#endif /* !NO_PRINT && !USER_PRINT */
break;
// clear eeprom
@ -519,265 +549,196 @@ static bool command_console(uint8_t code) {
case KC_H:
case KC_SLASH: /* ? */
command_console_help();
break;
print("C> ");
return true;
case KC_Q:
case KC_ESC:
command_state = ONESHOT;
return false;
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
#if defined(MOUSEKEY_ENABLE)
case KC_M:
mousekey_console_help();
print("M> ");
command_state = MOUSEKEY;
mousekey_console(KC_SLASH /* ? */);
return true;
#endif
default:
print("?");
return false;
}
print("C> ");
return true;
}
#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED)
/***********************************************************
* Mousekey console
***********************************************************/
static uint8_t mousekey_param = 0;
static void mousekey_param_print(void) {
// Print these variables if NO_PRINT or USER_PRINT are not defined.
# if !defined(NO_PRINT) && !defined(USER_PRINT)
print("\n\t- Values -\n");
print("1: delay(*10ms): ");
print_dec(mk_delay);
print("\n");
print("2: interval(ms): ");
print_dec(mk_interval);
print("\n");
print("3: max_speed: ");
print_dec(mk_max_speed);
print("\n");
print("4: time_to_max: ");
print_dec(mk_time_to_max);
print("\n");
print("5: wheel_max_speed: ");
print_dec(mk_wheel_max_speed);
print("\n");
print("6: wheel_time_to_max: ");
print_dec(mk_wheel_time_to_max);
print("\n");
# endif /* !NO_PRINT */
}
//#define PRINT_SET_VAL(v) print(#v " = "); print_dec(v); print("\n");
# define PRINT_SET_VAL(v) xprintf(# v " = %d\n", (v))
static void mousekey_param_inc(uint8_t param, uint8_t inc) {
switch (param) {
case 1:
if (mk_delay + inc < UINT8_MAX)
mk_delay += inc;
else
mk_delay = UINT8_MAX;
PRINT_SET_VAL(mk_delay);
break;
case 2:
if (mk_interval + inc < UINT8_MAX)
mk_interval += inc;
else
mk_interval = UINT8_MAX;
PRINT_SET_VAL(mk_interval);
break;
case 3:
if (mk_max_speed + inc < UINT8_MAX)
mk_max_speed += inc;
else
mk_max_speed = UINT8_MAX;
PRINT_SET_VAL(mk_max_speed);
break;
case 4:
if (mk_time_to_max + inc < UINT8_MAX)
mk_time_to_max += inc;
else
mk_time_to_max = UINT8_MAX;
PRINT_SET_VAL(mk_time_to_max);
break;
case 5:
if (mk_wheel_max_speed + inc < UINT8_MAX)
mk_wheel_max_speed += inc;
else
mk_wheel_max_speed = UINT8_MAX;
PRINT_SET_VAL(mk_wheel_max_speed);
break;
case 6:
if (mk_wheel_time_to_max + inc < UINT8_MAX)
mk_wheel_time_to_max += inc;
else
mk_wheel_time_to_max = UINT8_MAX;
PRINT_SET_VAL(mk_wheel_time_to_max);
break;
}
}
#if defined(MOUSEKEY_ENABLE)
static void mousekey_param_dec(uint8_t param, uint8_t dec) {
switch (param) {
case 1:
if (mk_delay > dec)
mk_delay -= dec;
else
mk_delay = 0;
PRINT_SET_VAL(mk_delay);
break;
case 2:
if (mk_interval > dec)
mk_interval -= dec;
else
mk_interval = 0;
PRINT_SET_VAL(mk_interval);
break;
case 3:
if (mk_max_speed > dec)
mk_max_speed -= dec;
else
mk_max_speed = 0;
PRINT_SET_VAL(mk_max_speed);
break;
case 4:
if (mk_time_to_max > dec)
mk_time_to_max -= dec;
else
mk_time_to_max = 0;
PRINT_SET_VAL(mk_time_to_max);
break;
case 5:
if (mk_wheel_max_speed > dec)
mk_wheel_max_speed -= dec;
else
mk_wheel_max_speed = 0;
PRINT_SET_VAL(mk_wheel_max_speed);
break;
case 6:
if (mk_wheel_time_to_max > dec)
mk_wheel_time_to_max -= dec;
else
mk_wheel_time_to_max = 0;
PRINT_SET_VAL(mk_wheel_time_to_max);
break;
}
# if !defined(NO_PRINT) && !defined(USER_PRINT)
static void mousekey_param_print(void) {
xprintf(/* clang-format off */
#ifndef MK_3_SPEED
"1: delay(*10ms): %u\n"
"2: interval(ms): %u\n"
"3: max_speed: %u\n"
"4: time_to_max: %u\n"
"5: wheel_max_speed: %u\n"
"6: wheel_time_to_max: %u\n"
, mk_delay
, mk_interval
, mk_max_speed
, mk_time_to_max
, mk_wheel_max_speed
, mk_wheel_time_to_max
#else
"no knobs sorry\n"
#endif
); /* clang-format on */
}
# endif /* !NO_PRINT && !USER_PRINT */
# if !defined(NO_PRINT) && !defined(USER_PRINT)
static void mousekey_console_help(void) {
print("\n\t- Mousekey -\n"
"ESC/q: quit\n"
"1: delay(*10ms)\n"
"2: interval(ms)\n"
"3: max_speed\n"
"4: time_to_max\n"
"5: wheel_max_speed\n"
"6: wheel_time_to_max\n"
"\n"
"p: print values\n"
"d: set defaults\n"
"up: +1\n"
"down: -1\n"
"pgup: +10\n"
"pgdown: -10\n"
"\n"
"speed = delta * max_speed * (repeat / time_to_max)\n");
xprintf("where delta: cursor=%d, wheel=%d\n"
"See http://en.wikipedia.org/wiki/Mouse_keys\n",
MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA);
mousekey_param_print();
xprintf(/* clang-format off */
"p: print values\n"
"d: set defaults\n"
"up: +1\n"
"dn: -1\n"
"lt: +10\n"
"rt: -10\n"
"ESC/q: quit\n"
#ifndef MK_3_SPEED
"\n"
"speed = delta * max_speed * (repeat / time_to_max)\n"
"where delta: cursor=%d, wheel=%d\n"
"See http://en.wikipedia.org/wiki/Mouse_keys\n"
, MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA
#endif
); /* clang-format on */
}
# endif /* !NO_PRINT && !USER_PRINT */
/* Only used by `quantum/command.c` / `command_proc()`. To avoid
* any doubt: we return `false` to return to the main console,
* which differs from the `bool` that `command_proc()` returns. */
bool mousekey_console(uint8_t code) {
static uint8_t param = 0;
static uint8_t *pp = NULL;
static char * desc = NULL;
# if defined(NO_PRINT) || defined(USER_PRINT) /* -Wunused-parameter */
(void)desc;
# endif
int8_t change = 0;
static bool mousekey_console(uint8_t code) {
switch (code) {
case KC_H:
case KC_SLASH: /* ? */
# if !defined(NO_PRINT) && !defined(USER_PRINT)
print("\n\t- Mousekey -\n");
mousekey_console_help();
# endif
break;
case KC_Q:
case KC_ESC:
if (mousekey_param) {
mousekey_param = 0;
} else {
print("C> ");
command_state = CONSOLE;
return false;
}
print("q\n");
if (!param) return false;
param = 0;
pp = NULL;
desc = NULL;
break;
case KC_P:
# if !defined(NO_PRINT) && !defined(USER_PRINT)
print("\n\t- Values -\n");
mousekey_param_print();
# endif
break;
case KC_1:
case KC_2:
case KC_3:
case KC_4:
case KC_5:
case KC_6:
mousekey_param = numkey2num(code);
break;
case KC_UP:
mousekey_param_inc(mousekey_param, 1);
break;
case KC_DOWN:
mousekey_param_dec(mousekey_param, 1);
break;
case KC_PGUP:
mousekey_param_inc(mousekey_param, 10);
break;
case KC_PGDN:
mousekey_param_dec(mousekey_param, 10);
break;
case KC_1 ... KC_0: /* KC_0 gives param = 10 */
param = 1 + code - KC_1;
switch (param) { /* clang-format off */
# define PARAM(n, v) case n: pp = &(v); desc = #v; break
#ifndef MK_3_SPEED
PARAM(1, mk_delay);
PARAM(2, mk_interval);
PARAM(3, mk_max_speed);
PARAM(4, mk_time_to_max);
PARAM(5, mk_wheel_max_speed);
PARAM(6, mk_wheel_time_to_max);
#endif /* MK_3_SPEED */
# undef PARAM
default:
param = 0;
print("?\n");
break;
} /* clang-format on */
if (param) xprintf("%u\n", param);
break;
/* clang-format off */
case KC_UP: change = +1; break;
case KC_DOWN: change = -1; break;
case KC_LEFT: change = -10; break;
case KC_RIGHT: change = +10; break;
/* clang-format on */
case KC_D:
# ifndef MK_3_SPEED
mk_delay = MOUSEKEY_DELAY / 10;
mk_interval = MOUSEKEY_INTERVAL;
mk_max_speed = MOUSEKEY_MAX_SPEED;
mk_time_to_max = MOUSEKEY_TIME_TO_MAX;
mk_wheel_max_speed = MOUSEKEY_WHEEL_MAX_SPEED;
mk_wheel_time_to_max = MOUSEKEY_WHEEL_TIME_TO_MAX;
print("set default\n");
# endif /* MK_3_SPEED */
print("defaults\n");
break;
default:
print("?");
return false;
print("?\n");
break;
}
if (change) {
if (pp) {
int16_t val = *pp + change;
if (val > (int16_t)UINT8_MAX)
*pp = UINT8_MAX;
else if (val < 0)
*pp = 0;
else
*pp = (uint8_t)val;
xprintf("= %u\n", *pp);
} else {
print("?\n");
}
}
if (mousekey_param) {
xprintf("M%d> ", mousekey_param);
if (param) {
xprintf("M%u:%s> ", param, desc ? desc : "???");
} else {
print("M>");
print("M> ");
}
return true;
}
#endif
#endif /* MOUSEKEY_ENABLE */
/***********************************************************
* Utilities
***********************************************************/
uint8_t numkey2num(uint8_t code) {
switch (code) {
case KC_1:
return 1;
case KC_2:
return 2;
case KC_3:
return 3;
case KC_4:
return 4;
case KC_5:
return 5;
case KC_6:
return 6;
case KC_7:
return 7;
case KC_8:
return 8;
case KC_9:
return 9;
case KC_0:
return 0;
}
return 0;
}
static void switch_default_layer(uint8_t layer) {
xprintf("L%d\n", layer);


+ 1
- 2
quantum/command.h View File

@ -28,8 +28,7 @@ bool command_extra(uint8_t code);
bool command_console_extra(uint8_t code);
#ifdef COMMAND_ENABLE
uint8_t numkey2num(uint8_t code);
bool command_proc(uint8_t code);
bool command_proc(uint8_t code);
#else
# define command_proc(code) false
#endif


Loading…
Cancel
Save