diff --git a/keyboards/ploopyco/madromys/config.h b/keyboards/ploopyco/madromys/config.h new file mode 100644 index 00000000000..19fa1fada40 --- /dev/null +++ b/keyboards/ploopyco/madromys/config.h @@ -0,0 +1,29 @@ +/* Copyright 2023 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2019 Sunjun Kim + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// #define ROTATIONAL_TRANSFORM_ANGLE 0 +#define POINTING_DEVICE_INVERT_Y + +/* PMW3360 Settings */ +#define PMW33XX_LIFTOFF_DISTANCE 0x00 +#define PMW33XX_CS_PIN GP5 +#define SPI_SCK_PIN GP2 +#define SPI_MISO_PIN GP0 +#define SPI_MOSI_PIN GP7 \ No newline at end of file diff --git a/keyboards/ploopyco/madromys/info.json b/keyboards/ploopyco/madromys/info.json new file mode 100644 index 00000000000..e39f593df9f --- /dev/null +++ b/keyboards/ploopyco/madromys/info.json @@ -0,0 +1,35 @@ +{ + "keyboard_name": "Ploopy Adept Trackball", + "url": "www.ploopy.co", + "maintainer": "ploopyco", + "manufacturer": "Ploopy Corporation", + "processor": "RP2040", + "bootloader": "rp2040", + "usb": { + "vid": "0x5043", + "pid": "0x5C47", + "max_power": 100 + }, + "features": { + "bootmagic": true, + "extrakey": true, + "mousekey": true, + "nkro": true, + "pointing_device": true, + }, + "layouts": { + "LAYOUT": { + "layout": [ + {"matrix": [0, 1], "label":"Top Left Left", "x":0, "y":0, "h":2}, + {"matrix": [0, 2], "label":"Top Left", "x":1.25, "y":0, "h":1.25}, + {"matrix": [0, 3], "label":"Top Right", "x":2.5, "y":0, "h":1.25}, + {"matrix": [0, 4], "label":"Top Right Right", "x":3.75, "y":0, "h":2}, + {"matrix": [0, 0], "label":"Bottom Left", "x":0, "y":2.25, "w":1.75, "h":2}, + {"matrix": [0, 5], "label":"Bottom Right", "x":3, "y":2.25, "w":1.75, "h":2} + ] + } + }, + "dynamic_keymap": { + "layer_count": 8 + }, +} diff --git a/keyboards/ploopyco/madromys/keymaps/default/keymap.c b/keyboards/ploopyco/madromys/keymaps/default/keymap.c new file mode 100644 index 00000000000..bc8265b39d0 --- /dev/null +++ b/keyboards/ploopyco/madromys/keymaps/default/keymap.c @@ -0,0 +1,22 @@ +/* Copyright 2023 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2019 Sunjun Kim + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( KC_BTN4, KC_BTN5, DRAG_SCROLL, KC_BTN2, KC_BTN1, KC_BTN3 ) +}; diff --git a/keyboards/ploopyco/madromys/keymaps/via/keymap.c b/keyboards/ploopyco/madromys/keymaps/via/keymap.c new file mode 100644 index 00000000000..bc8265b39d0 --- /dev/null +++ b/keyboards/ploopyco/madromys/keymaps/via/keymap.c @@ -0,0 +1,22 @@ +/* Copyright 2023 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2019 Sunjun Kim + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( KC_BTN4, KC_BTN5, DRAG_SCROLL, KC_BTN2, KC_BTN1, KC_BTN3 ) +}; diff --git a/keyboards/ploopyco/madromys/keymaps/via/readme.md b/keyboards/ploopyco/madromys/keymaps/via/readme.md new file mode 100644 index 00000000000..c8717fe1f74 --- /dev/null +++ b/keyboards/ploopyco/madromys/keymaps/via/readme.md @@ -0,0 +1 @@ +This is the VIA keymap for Ploopyco Madromys Trackball, which can be used to customise the key layout. See [the VIA online app](https://usevia.app/) for how to do this. diff --git a/keyboards/ploopyco/madromys/keymaps/via/rules.mk b/keyboards/ploopyco/madromys/keymaps/via/rules.mk new file mode 100644 index 00000000000..1e5b99807cb --- /dev/null +++ b/keyboards/ploopyco/madromys/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/ploopyco/madromys/madromys.c b/keyboards/ploopyco/madromys/madromys.c new file mode 100644 index 00000000000..8ea1bcdbd78 --- /dev/null +++ b/keyboards/ploopyco/madromys/madromys.c @@ -0,0 +1,176 @@ +/* Copyright 2023 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2019 Sunjun Kim + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "madromys.h" + +#ifndef PLOOPY_DPI_OPTIONS +# define PLOOPY_DPI_OPTIONS \ + { 600, 900, 1200, 1600 } +# ifndef PLOOPY_DPI_DEFAULT +# define PLOOPY_DPI_DEFAULT 1 +# endif +#endif +#ifndef PLOOPY_DPI_DEFAULT +# define PLOOPY_DPI_DEFAULT 0 +#endif +#ifndef PLOOPY_DRAGSCROLL_DPI +# define PLOOPY_DRAGSCROLL_DPI 100 // Fixed-DPI Drag Scroll +#endif +#ifndef PLOOPY_DRAGSCROLL_FIXED +# define PLOOPY_DRAGSCROLL_FIXED 1 +#endif +#ifndef PLOOPY_DRAGSCROLL_MULTIPLIER +# define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75 // Variable-DPI Drag Scroll +#endif +#ifndef PLOOPY_DRAGSCROLL_SEMAPHORE +# define PLOOPY_DRAGSCROLL_SEMAPHORE 4 +#endif +#ifndef PLOOPY_DRAGSCROLL_MOMENTARY +# define PLOOPY_DRAGSCROLL_MOMENTARY 1 +#endif +#ifndef PLOOPY_DRAGSCROLL_INVERT +# define PLOOPY_DRAGSCROLL_INVERT 1 +#endif + +keyboard_config_t keyboard_config; +uint16_t dpi_array[] = PLOOPY_DPI_OPTIONS; +#define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) + +// TODO: Implement libinput profiles +// https://wayland.freedesktop.org/libinput/doc/latest/pointer-acceleration.html +// Compile time accel selection +// Valid options are ACC_NONE, ACC_LINEAR, ACC_CUSTOM, ACC_QUADRATIC + +// Trackball State +bool is_drag_scroll = false; + +// drag scroll divisor state +int8_t drag_scroll_x_semaphore = 0; +int8_t drag_scroll_y_semaphore = 0; + +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { + if (is_drag_scroll) { + int16_t mouse_report_x_temp = mouse_report.x; + int16_t mouse_report_y_temp = mouse_report.y; + int16_t mouse_report_x_calc = 0; + int16_t mouse_report_y_calc = 0; + int16_t valx = (mouse_report_x_temp > 0) ? -1 : 1; + int16_t valy = (mouse_report_y_temp > 0) ? -1 : 1; + + while (mouse_report_x_temp != 0) { + mouse_report_x_temp += valx; + drag_scroll_x_semaphore -= valx; + + if (abs(drag_scroll_x_semaphore) >= PLOOPY_DRAGSCROLL_SEMAPHORE) { + mouse_report_x_calc -= valx; + drag_scroll_x_semaphore = 0; + } + } + + while (mouse_report_y_temp != 0) { + mouse_report_y_temp += valy; + drag_scroll_y_semaphore -= valy; + + if (abs(drag_scroll_y_semaphore) >= PLOOPY_DRAGSCROLL_SEMAPHORE) { + mouse_report_y_calc -= valy; + drag_scroll_y_semaphore = 0; + } + } + + mouse_report.h = mouse_report_x_calc; + +#ifdef PLOOPY_DRAGSCROLL_INVERT + // Invert vertical scroll direction + mouse_report.v = -mouse_report_y_calc; +#else + mouse_report.v = mouse_report_y_calc; +#endif + mouse_report.x = 0; + mouse_report.y = 0; + } + + return pointing_device_task_user(mouse_report); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t* record) { + if (!process_record_user(keycode, record)) { + return false; + } + + if (keycode == DPI_CONFIG && record->event.pressed) { + keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; + eeconfig_update_kb(keyboard_config.raw); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); + } + + if (keycode == DRAG_SCROLL) { +#ifndef PLOOPY_DRAGSCROLL_MOMENTARY + if (record->event.pressed) +#endif + { + is_drag_scroll ^= 1; + } +#ifdef PLOOPY_DRAGSCROLL_FIXED + pointing_device_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]); +#else + pointing_device_set_cpi(is_drag_scroll ? (dpi_array[keyboard_config.dpi_config] * PLOOPY_DRAGSCROLL_MULTIPLIER) : dpi_array[keyboard_config.dpi_config]); +#endif + } + + return true; +} + +// Hardware Setup +void keyboard_pre_init_kb(void) { + // debug_enable = true; + // debug_matrix = true; + // debug_mouse = true; + // debug_encoder = true; + + /* Ground all output pins connected to ground. This provides additional + * pathways to ground. If you're messing with this, know this: driving ANY + * of these pins high will cause a short. On the MCU. Ka-blooey. + */ + const pin_t unused_pins[] = { GP1, GP3, GP4, GP6, GP8, GP10, GP14, GP16, + GP18, GP20, GP22, GP24, GP25, GP26, GP27, GP28, GP29 }; + + for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) { + setPinOutput(unused_pins[i]); + writePinLow(unused_pins[i]); + } + + keyboard_pre_init_user(); +} + +void pointing_device_init_kb(void) { pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); } + +void eeconfig_init_kb(void) { + keyboard_config.dpi_config = PLOOPY_DPI_DEFAULT; + eeconfig_update_kb(keyboard_config.raw); + eeconfig_init_user(); +} + +void matrix_init_kb(void) { + // is safe to just read DPI setting since matrix init + // comes before pointing device init. + keyboard_config.raw = eeconfig_read_kb(); + if (keyboard_config.dpi_config > DPI_OPTION_SIZE) { + eeconfig_init_kb(); + } + matrix_init_user(); +} diff --git a/keyboards/ploopyco/madromys/madromys.h b/keyboards/ploopyco/madromys/madromys.h new file mode 100644 index 00000000000..944cce937b4 --- /dev/null +++ b/keyboards/ploopyco/madromys/madromys.h @@ -0,0 +1,37 @@ +/* Copyright 2023 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2019 Sunjun Kim + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +typedef union { + uint32_t raw; + struct { + uint8_t dpi_config; + }; +} keyboard_config_t; +_Static_assert(sizeof(keyboard_config_t) == sizeof(uint32_t), "keyboard_config_t size mismatch compared to EEPROM area"); + +extern keyboard_config_t keyboard_config; +extern uint16_t dpi_array[]; + +enum ploopy_keycodes { + DPI_CONFIG = QK_KB_0, + DRAG_SCROLL, +}; diff --git a/keyboards/ploopyco/madromys/readme.md b/keyboards/ploopyco/madromys/readme.md new file mode 100644 index 00000000000..456a3c7db20 --- /dev/null +++ b/keyboards/ploopyco/madromys/readme.md @@ -0,0 +1,43 @@ + +# Ploopyco Madromys Trackball + +It's a DIY, QMK-powered trackball! + +* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco) +* Hardware Supported: RP2040 +* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco) + +Make example for this keyboard (after setting up your build environment): + + qmk compile -kb ploopyco/madromys -km default + +# Building Firmware + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +# Triggering the Bootloader + +[Do you see those two golden holes in the board](https://ploopy.co/wp-content/uploads/2023/11/boot.jpg)? Those are called **vias**. They act exactly like a switch does. Right now, that switch is OFF. However, if you take a paperclip or a pair of metal tweezers and touch those two vias, the two vias will form an electrical connection. Effectively, that switch turns ON. + +Go ahead and connect the two vias, and then (while the vias are connected) plug in the Madromys board into your computer. + +The computer should recognise that a mass storage device was just plugged in. Once this is done, you should be able to drag and drop files onto the Madromys board, as if the board was a USB drive. Feel free to remove the tweezers or paperclip at this point. + +If you want to upload a new firmware file (a ".uf2" file, like "madromys_awesome_version.uf2" or something), just drag it into the folder, and it'll automatically install on the Madromys board and restart itself, in normal operating mode. You're done! + +**TIP**: If your firmware is in some kind of strange state and uploading new firmware isn't fixing it, try uploading [a flash nuke](https://learn.adafruit.com/getting-started-with-raspberry-pi-pico-circuitpython/circuitpython#flash-resetting-uf2-3083182) to the Madromys board before flashing the new firmware. It wipes the memory of the Madromys board completely clean, which can help clear a few types of errors. + +# Drag Scroll + +Drag Scroll is a custom keycode for Ploopy devices that allows you to hold or tap a button and have the mouse movement translate into scrolling instead. + +Nothing needs to be enabled to use this functionality; it's enabled on Madromys by default. + +### Drag Scroll Configuration + +* `#define PLOOPY_DRAGSCROLL_MOMENTARY` - Makes the key into a momentary key, rather than a toggle. +* `#define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75` - Sets the DPI multiplier to use when drag scroll is enabled. +* `#define PLOOPY_DRAGSCROLL_FIXED` - Normally, when activating Drag Scroll, it uses a fraction of the current DPI. You can define this to use a specific, set DPI rather than a fraction of the current DPI. + * `#define PLOOPY_DRAGSCROLL_DPI 100` - When the fixed DPI option is enabled, this sets the DPI to be used for Drag Scroll. +* `#define PLOOPY_DRAGSCROLL_INVERT` - This reverses the direction that the scroll is performed. +* `#define PLOOPY_DRAGSCROLL_SEMAPHORE` - This is a divisor on the drag scroll sensitivity. The default is 0, which means that the drag scroll is at maximum sensitivity. A value of 4 would mean that the drag scroll is 4 times less sensitive. \ No newline at end of file diff --git a/keyboards/ploopyco/madromys/rev1_001/info.json b/keyboards/ploopyco/madromys/rev1_001/info.json new file mode 100644 index 00000000000..5cb4ee39381 --- /dev/null +++ b/keyboards/ploopyco/madromys/rev1_001/info.json @@ -0,0 +1,23 @@ +{ + "usb": { + "device_version": "1.0.0" + }, + "diode_direction": "COL2ROW", + "matrix_pins": { + "direct": [ + ["GP15", "GP17", "GP19", "GP21", "GP23", "GP11"] + ] + }, + "rgblight": { + "led_count": 3, + "max_brightness": 40, + "animations": { + "breathing": true, + "rainbow_mood": true, + "rainbow_swirl": true + } + }, + "ws2812": { + "pin": "GP12" + } +} diff --git a/keyboards/ploopyco/madromys/rev1_001/readme.md b/keyboards/ploopyco/madromys/rev1_001/readme.md new file mode 100644 index 00000000000..b9a2e106dbd --- /dev/null +++ b/keyboards/ploopyco/madromys/rev1_001/readme.md @@ -0,0 +1,3 @@ +This is the R1.001+ version of Madromys. Future versions may have other features. + +See the [main readme](../readme.md) for more details. diff --git a/keyboards/ploopyco/madromys/rev1_001/rules.mk b/keyboards/ploopyco/madromys/rev1_001/rules.mk new file mode 100644 index 00000000000..e69de29bb2d diff --git a/keyboards/ploopyco/madromys/rules.mk b/keyboards/ploopyco/madromys/rules.mk new file mode 100644 index 00000000000..b7e33d92f92 --- /dev/null +++ b/keyboards/ploopyco/madromys/rules.mk @@ -0,0 +1,3 @@ +POINTING_DEVICE_DRIVER = pmw3360 + +DEFAULT_FOLDER = ploopyco/madromys/rev1_001