Keymap updates and some adjustment for latest version of QMK

keyboards/handwired/promethium/keymaps/priyadi/Makefile

@@ -20,6 +20,7 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this
 PS2_MOUSE_ENABLE = yes
 PS2_USE_INT = yes
 FAUXCLICKY_ENABLE = yes
+BLUETOOTH = AdafruitBLE
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/handwired/promethium/keymaps/priyadi/README.md

@@ -37,8 +37,8 @@ On Promethium, USB or Bluetooth output is detected on startup. If USB is connect
 
 SYS-W, SYS-L, SYS-M switch Unicode input method. SYS-Q, SYS-D, SYS-C, SYS-K, SYS-N switch to QWERTY, DVORAK, Colemak, Workman and Norman, respectively.
 
-On Planck, SYS-A (mnemonic: audio) toggles faux clicky: use buzzer to emit clicks on key presses and releases.
+SYS-A (mnemonic: audio) toggles faux clicky: use buzzer to emit clicks on key presses and releases.
 
-On Promethium there are 6 indicator LEDs, and under switch LEDs on each switches, including Trackpoint buttons. Totaling 57 LEDs. Output is limited to 0xF for each LEDs to conserve power. SYS-G (mnemonic: glow) toggles various backlighting modes.
+On Promethium there are 16 indicator LEDs, and under switch LEDs on each switches, including Trackpoint buttons. Totaling 67 LEDs. Output is limited to 0xF for each LEDs to conserve power. SYS-G (mnemonic: glow) toggles various backlighting modes.
 
 On Promethium, there's a LED to indicate battery level. Hue indicates level: green is full, red is empty.

keyboards/handwired/promethium/keymaps/priyadi/keymap.c

@@ -38,6 +38,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #ifdef FAUXCLICKY_ENABLE
 #include "fauxclicky.h"
+#ifdef RGBSPS_ENABLE
+#undef FAUXCLICKY_OFF
+#define FAUXCLICKY_OFF do { \
+    fauxclicky_enabled = false; \
+    rgbsps_set(LED_AUDIO, 0, 0, 0); \
+    fauxclicky_stop(); \
+} while (0)
+#undef FAUXCLICKY_ON
+#define FAUXCLICKY_ON do { \
+    fauxclicky_enabled = true; \
+    rgbsps_set(LED_AUDIO, 8, 0, 8); \
+} while (0)
+#endif
 #endif
 #include "outputselect.h"
 #include "led.h"
@@ -128,8 +141,8 @@ enum planck_keycodes {
 #ifndef FAUXCLICKY_ENABLE
   FC_TOG,
 #endif
-#ifndef ADAFRUIT_BLE_ENABLE
-  OUT_BLE,
+#ifndef MODULE_ADAFRUIT_BLE
+  OUT_BT,
 #endif
   KEYCODE_END
 };
@@ -428,12 +441,23 @@ const uint8_t PROGMEM LED_FN[] = {
 };
 
 const uint8_t PROGMEM LED_INDICATORS[] = {
-  LED_IND_EMOJI,
-  LED_IND_NUM,
-  LED_IND_FUN,
-  LED_IND_BATTERY,
-  LED_IND_USB,
+  LED_IND_LINUX,
+  LED_IND_APPLE,
+  LED_IND_WINDOWS,
+  LED_IND_QWERTY,
+  LED_IND_ALT,
+  LED_IND_AUDIO,
   LED_IND_BLUETOOTH,
+  LED_IND_USB,
+
+  LED_IND_BATTERY,
+  LED_IND_CAPSLOCK,
+  LED_IND_GUI,
+  LED_IND_FUN,
+  LED_IND_NUM,
+  LED_IND_PUNC,
+  LED_IND_EMOJI,
+  LED_IND_GREEK,
 };
 
 const uint8_t PROGMEM LED_TRACKPOINT[] = {
@@ -486,15 +510,31 @@ void led_reset(void) {
   }
 }
 
+void led_set_default_layer_indicator(void) {
+  uint8_t default_layer = biton32(default_layer_state);
+  if (default_layer == _QWERTY) {
+    rgbsps_set(LED_IND_QWERTY, 15, 10, 0);
+    rgbsps_set(LED_IND_ALT, 0, 0, 0);
+  } else {
+    rgbsps_set(LED_IND_QWERTY, 0, 0, 0);
+    rgbsps_set(LED_IND_ALT, 15, 10, 0);
+  }
+  rgbsps_send();
+  return;
+}
+
 void led_set_layer_indicator(void) {
   static uint8_t oldlayer = 255;
 
+  led_reset();
+
+  rgbsps_set(LED_IND_GUI, 0, 0, 0);
   rgbsps_set(LED_IND_FUN, 0, 0, 0);
-  // rgbsps_set(LED_IND_NUM, 0, 0, 0);
+  rgbsps_set(LED_IND_NUM, 0, 0, 0);
+  rgbsps_set(LED_IND_PUNC, 0, 0, 0);
+  rgbsps_set(LED_IND_GREEK, 0, 0, 0);
   rgbsps_set(LED_IND_EMOJI, 0, 0, 0);
 
-  led_reset();
-
   uint8_t layer = biton32(layer_state);
   if (oldlayer == layer) {
     return;
@@ -508,24 +548,57 @@ void led_set_layer_indicator(void) {
   }
 
   switch(layer) {
+    case _GUI:
+      rgbsps_set(LED_IND_GUI, 15, 0, 15);
+      break;
     case _FUN:
       rgbsps_set(LED_IND_FUN, 15, 0, 0);
       break;
-    // case _NUM:
-    //   rgbsps_set(LED_IND_NUM, 0, 0, 15);
-    //   break;
+    case _NUM:
+      rgbsps_set(LED_IND_NUM, 0, 0, 15);
+      break;
+    case _PUNC:
+      rgbsps_set(LED_IND_PUNC, 0, 15, 0);
+      break;
+    case _GREEKL:
+    case _GREEKU:
+      rgbsps_set(LED_IND_GREEK, 0, 15, 15);
+      break;
     case _EMOJI:
       rgbsps_set(LED_IND_EMOJI, 15, 15, 0);
       break;
     default:
+      rgbsps_set(LED_IND_GUI, 3, 3, 3);
       rgbsps_set(LED_IND_FUN, 3, 3, 3);
-      // rgbsps_set(LED_IND_NUM, 3, 3, 3);
+      rgbsps_set(LED_IND_NUM, 3, 3, 3);
+      rgbsps_set(LED_IND_PUNC, 3, 3, 3);
+      rgbsps_set(LED_IND_GREEK, 3, 3, 3);
       rgbsps_set(LED_IND_EMOJI, 3, 3, 3);
   }
 
   rgbsps_send();
 }
 
+void led_set_unicode_input_mode(void) {
+  rgbsps_set(LED_IND_LINUX, 0, 0, 0);
+  rgbsps_set(LED_IND_APPLE, 0, 0, 0);
+  rgbsps_set(LED_IND_WINDOWS, 0, 0, 0);
+
+  switch (get_unicode_input_mode()) {
+    case UC_LNX:
+      rgbsps_set(LED_IND_LINUX, 15, 15, 15);
+      break;
+    case UC_OSX:
+      rgbsps_set(LED_IND_APPLE, 15, 15, 15);
+      break;
+    case UC_WIN:
+    case UC_WINC:
+      rgbsps_set(LED_IND_WINDOWS, 15, 15, 15);
+      break;
+  }
+  rgbsps_send();
+}
+
 void led_set_output_ble(void) {
   rgbsps_set(LED_IND_BLUETOOTH, 0, 0, 15);
   rgbsps_set(LED_IND_USB, 0, 0, 0);
@@ -552,7 +625,16 @@ void led_init(void) {
   rgbsps_set(LED_TRACKPOINT1, 15, 0, 0);
   rgbsps_set(LED_TRACKPOINT2, 0, 0, 15);
   rgbsps_set(LED_TRACKPOINT3, 15, 0, 0);
+
+  // unicode input mode
+  led_set_unicode_input_mode();
+
+  // layer indicator
+  led_set_layer_indicator();
+  led_set_default_layer_indicator();
 }
+
+
 #endif // RGBSPS_ENABLE
 
 // keymaps
@@ -831,7 +913,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_SYS] = KEYMAP(
   DEBUG,   QWERTY,  WIN,     XXXXXXX, RESET,   XXXXXXX, XXXXXXX, OUT_USB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
   XXXXXXX, FC_TOG,  XXXXXXX, DVORAK,  XXXXXXX, GLOW,    XXXXXXX, XXXXXXX, WORKMAN, LINUX,   XXXXXXX, XXXXXXX,
-  XXXXXXX, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, OUT_BLE, NORMAN,  OSX,     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  XXXXXXX, XXXXXXX, XXXXXXX, COLEMAK, XXXXXXX, OUT_BT,  NORMAN,  OSX,     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
                                            _______, _______, _______
 ),
@@ -842,6 +924,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 void persistant_default_layer_set(uint16_t default_layer) {
   eeconfig_update_default_layer(default_layer);
   default_layer_set(default_layer);
+  led_set_default_layer_indicator();
 }
 
 #ifdef DOUBLESPACE_LAYER_ENABLE
@@ -1086,14 +1169,23 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     // OS switchers
     case LINUX:
       set_unicode_input_mode(UC_LNX);
+#ifdef RGBSPS_ENABLE
+      led_set_unicode_input_mode();
+#endif
       return false;
       break;
     case WIN:
       set_unicode_input_mode(UC_WINC);
+#ifdef RGBSPS_ENABLE
+      led_set_unicode_input_mode();
+#endif
       return false;
       break;
     case OSX:
       set_unicode_input_mode(UC_OSX);
+#ifdef RGBSPS_ENABLE
+      led_set_unicode_input_mode();
+#endif
       return false;
       break;
 
@@ -1115,6 +1207,14 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     // faux clicky indicator
 #ifdef FAUXCLICKY_ENABLE
     case FC_TOG:
+#ifdef RGBSPS_ENABLE
+      if (fauxclicky_enabled) {
+        rgbsps_set(LED_IND_AUDIO, 0, 0, 0);
+      } else {
+        rgbsps_set(LED_IND_AUDIO, 5, 11, 13);
+      }
+      rgbsps_send();
+#endif
       return true;
       break;
 #endif
@@ -1123,12 +1223,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 }
 
 void set_output_user(uint8_t output) {
-#ifdef ADAFRUIT_BLE_ENABLE
+#ifdef MODULE_ADAFRUIT_BLE
   switch(output) {
     case OUTPUT_USB:
       led_set_output_usb();
       break;
-    case OUTPUT_ADAFRUIT_BLE:
+    case OUTPUT_BLUETOOTH:
       led_set_output_ble();
       break;
     default:
@@ -1147,12 +1247,12 @@ void matrix_init_user() {
 #endif
 
   // auto detect output on init
-#ifdef ADAFRUIT_BLE_ENABLE
+#ifdef MODULE_ADAFRUIT_BLE
   uint8_t output = auto_detect_output();
   if (output == OUTPUT_USB) {
     set_output(OUTPUT_USB);
   } else {
-    set_output(OUTPUT_ADAFRUIT_BLE);
+    set_output(OUTPUT_BLUETOOTH);
   }
 #endif
 }
@@ -1178,9 +1278,9 @@ void turn_off_capslock() {
     bool new_capslock = usb_led & (1<<USB_LED_CAPS_LOCK);
     if (new_capslock ^ capslock) { // capslock state is different
       if ((capslock = new_capslock)) {
-        rgbsps_set(LED_IND_NUM, 15, 0, 0);
+        rgbsps_set(LED_IND_CAPSLOCK, 15, 0, 0);
       } else {
-        rgbsps_set(LED_IND_NUM, 0, 0, 0);
+        rgbsps_set(LED_IND_CAPSLOCK, 0, 0, 0);
       }
       rgbsps_send();
     }

keyboards/handwired/promethium/rules.mk

@@ -65,9 +65,9 @@ BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 PS2_MOUSE_ENABLE ?= yes
 PS2_USE_INT ?= yes
-ADAFRUIT_BLE_ENABLE ?= yes
 API_SYSEX_ENABLE ?= no
 CUSTOM_MATRIX ?= yes
+BLUETOOTH ?= AdafruitBLE
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend