From 405dea01bef215a0b79524e4ff74364f1bcfeadf Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 9 Aug 2019 07:09:54 +1000 Subject: [PATCH] Add some defaults for ATmega32A to mcu_selection.mk (#6253) * Add some defaults for ATmega32A to mcu_selection.mk * Remove boilerplate from templates * Relax INTERRUPT_CONTROL_ENDPOINT and PROGRAM_CMD * Apply suggestions from code review Co-Authored-By: Drashna Jaelre --- quantum/mcu_selection.mk | 26 +++++++++++++++++++-- quantum/template/avr/rules.mk | 36 ------------------------------ quantum/template/ps2avrgb/rules.mk | 11 --------- 3 files changed, 24 insertions(+), 49 deletions(-) diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index fa6dc8b53ca..cca7720e9c7 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -1,4 +1,3 @@ - ifneq ($(findstring STM32F303, $(MCU)),) ## chip/board settings # - the next two should match the directories in @@ -54,7 +53,7 @@ ifneq (,$(filter $(MCU),atmega32u4 at90usb1286)) # LUFA specific # # Target architecture (see library "Board Types" documentation). - ARCH ?= AVR8 + ARCH = AVR8 # Input clock frequency. # This will define a symbol, F_USB, in all source code files equal to the @@ -68,4 +67,27 @@ ifneq (,$(filter $(MCU),atmega32u4 at90usb1286)) # If no clock division is performed on the input clock inside the AVR (via the # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB ?= $(F_CPU) + + # Interrupt driven control endpoint task + ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes)) + OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + endif +endif + +ifneq (,$(filter $(MCU),atmega32a)) + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 12000000 + + # unsupported features for now + NO_UART ?= yes + NO_SUSPEND_POWER_DOWN ?= yes + + # Programming options + PROGRAM_CMD ?= ./util/atmega32a_program.py $(TARGET).hex endif diff --git a/quantum/template/avr/rules.mk b/quantum/template/avr/rules.mk index 133c9e363b9..50deba92cf9 100644 --- a/quantum/template/avr/rules.mk +++ b/quantum/template/avr/rules.mk @@ -1,42 +1,6 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Bootloader selection # Teensy halfkay diff --git a/quantum/template/ps2avrgb/rules.mk b/quantum/template/ps2avrgb/rules.mk index 98a920e1828..a3ac9bd75ac 100644 --- a/quantum/template/ps2avrgb/rules.mk +++ b/quantum/template/ps2avrgb/rules.mk @@ -1,13 +1,5 @@ # MCU name MCU = atmega32a -PROTOCOL = VUSB - -# unsupported features for now -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# processor frequency -F_CPU = 12000000 # Bootloader # This definition is optional, and if your keyboard supports multiple bootloaders of @@ -28,6 +20,3 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 SRC += i2c_master.c - -# programming options -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex