* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821
.
* Add Alter keyboard
* Fixed keymap.c
* Fixed another issue on the keymap.c
* Updated the files based on the comments
* Edited default keymap and enabled rgbanimations on config.h
* Updated the info.json
pull/9747/head
@ -0,0 +1,96 @@ | |||
/* | |||
Copyright 2020 Neil Brian Ramirez | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x0717 | |||
#define PRODUCT_ID 0x0002 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Neil Brian Ramirez | |||
#define PRODUCT Alter | |||
#define DESCRIPTION An Alice layout keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { F7, F6, F5, E6, D0, B7, D5, D3, D2, D1 } | |||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B0, B1, B2, B3 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
// #define BACKLIGHT_PIN F1 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
#define RGB_DI_PIN F1 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLED_NUM 18 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
// /*== all animations enable ==*/ | |||
#define RGBLIGHT_ANIMATIONS | |||
// /*== or choose animations ==*/ | |||
// #define RGBLIGHT_EFFECT_BREATHING | |||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
// #define RGBLIGHT_EFFECT_SNAKE | |||
// #define RGBLIGHT_EFFECT_KNIGHT | |||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||
// /*== customize breathing effect ==*/ | |||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
// /*==== use exp() and sin() ====*/ | |||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
@ -0,0 +1,82 @@ | |||
{ | |||
"keyboard_name": "Alter", | |||
"url": "", | |||
"maintainer": "Neil Brian Ramirez", | |||
"width": 20, | |||
"height": 5.25, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"x":0.5, "y":0}, | |||
{"x":2, "y":0}, | |||
{"x":3, "y":0}, | |||
{"x":4, "y":0}, | |||
{"x":5, "y":0}, | |||
{"x":6, "y":0}, | |||
{"x":7, "y":0}, | |||
{"x":8, "y":0}, | |||
{"x":11.25, "y":0}, | |||
{"x":12.25, "y":0}, | |||
{"x":13.25, "y":0}, | |||
{"x":14.25, "y":0}, | |||
{"x":15.25, "y":0}, | |||
{"x":16.25, "y":0}, | |||
{"x":17.25, "y":0}, | |||
{"x":18.25, "y":0}, | |||
{"x":0.25, "y":1}, | |||
{"x":1.75, "y":1, "w":1.5}, | |||
{"x":3.25, "y":1}, | |||
{"x":4.25, "y":1}, | |||
{"x":5.25, "y":1}, | |||
{"x":6.25, "y":1}, | |||
{"x":7.25, "y":1}, | |||
{"x":11, "y":1}, | |||
{"x":12, "y":1}, | |||
{"x":13, "y":1}, | |||
{"x":14, "y":1}, | |||
{"x":15, "y":1}, | |||
{"x":16, "y":1}, | |||
{"x":17, "y":1}, | |||
{"x":18, "y":1, "w":1.5}, | |||
{"x":0, "y":2}, | |||
{"x":1.5, "y":2, "w":1.75}, | |||
{"x":3.25, "y":2}, | |||
{"x":4.5, "y":2}, | |||
{"x":5.5, "y":2}, | |||
{"x":6.5, "y":2}, | |||
{"x":7.5, "y":2}, | |||
{"x":11.25, "y":2}, | |||
{"x":12.25, "y":2}, | |||
{"x":13.25, "y":2}, | |||
{"x":14.25, "y":2}, | |||
{"x":15.5, "y":2}, | |||
{"x":16.5, "y":2}, | |||
{"x":17.5, "y":2, "w":2.25}, | |||
{"x":1.25, "y":3, "w":2.25}, | |||
{"x":3.5, "y":3}, | |||
{"x":5, "y":3}, | |||
{"x":6, "y":3}, | |||
{"x":7, "y":3}, | |||
{"x":8, "y":3}, | |||
{"x":10.75, "y":3}, | |||
{"x":11.75, "y":3}, | |||
{"x":12.75, "y":3}, | |||
{"x":13.75, "y":3}, | |||
{"x":15.25, "y":3}, | |||
{"x":16.25, "y":3}, | |||
{"x":17.25, "y":3, "w":1.75}, | |||
{"x":19, "y":3}, | |||
{"x":1.25, "y":4, "w":1.5}, | |||
{"x":5, "y":4, "w":1.5}, | |||
{"x":6.5, "y":4, "w":2}, | |||
{"x":8.5, "y":4, "w":1.25}, | |||
{"x":10.5, "y":4, "w":2.75}, | |||
{"x":13.25, "y":4, "w":1.5}, | |||
{"x":18.25, "y":4, "w":1.5}] | |||
} | |||
} | |||
} |
@ -0,0 +1,33 @@ | |||
/* Copyright 2020 Neil Brian Ramirez | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_ESC, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||
KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), | |||
KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RGUI, KC_RCTL | |||
), | |||
[1] = LAYOUT( | |||
RESET, _______, KC_F1 , KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, | |||
KC_BRIU, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______ , _______, KC_DEL, | |||
KC_BRID, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_HOME, KC_END, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1,12 @@ | |||
# Alter | |||
An Alice layout keyboard | |||
* Keyboard Maintainer: [Neil Brian Ramirez](https://github.com/NightlyBoards) | |||
* Hardware Supported: atmega32u4 | |||
Make example for this keyboard (after setting up your build environment): | |||
make nightly_boards/alter/rev1:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,37 @@ | |||
/* Copyright 2020 Neil Brian Ramirez | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "rev1.h" | |||
void keyboard_pre_init_kb(void) { | |||
led_init_ports(); | |||
keyboard_pre_init_user(); | |||
} | |||
void led_init_ports(void) { | |||
setPinOutput(D7); | |||
setPinOutput(D6); | |||
setPinOutput(B4); | |||
} | |||
bool led_update_kb(led_t led_state) { | |||
if (led_update_user(led_state)) { | |||
writePin(D7, led_state.num_lock); | |||
writePin(D6, led_state.caps_lock); | |||
writePin(B4, led_state.scroll_lock); | |||
} | |||
return true; | |||
} |
@ -0,0 +1,46 @@ | |||
/* Copyright 2020 Neil Brian Ramirez | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K17, K07, \ | |||
K20, K30, K21, K31, K22, K32, K23, K24, K34, K25, K35, K26, K36, K27, K37, \ | |||
K40, K50, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K47, \ | |||
K70, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76, K67, K77, \ | |||
K90, K82, K92, K83, K84, K95, K87 \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17 }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27 }, \ | |||
{ K30, K31, K32, KC_NO, K34, K35, K36, K37 }, \ | |||
{ K40, KC_NO, K42, K43, K44, K45, K46, K47 }, \ | |||
{ K50, K51, K52, K53, K54, K55, K56, KC_NO }, \ | |||
{ KC_NO, KC_NO, K62, K63, K64, K65, K66, K67 }, \ | |||
{ K70, K71, K72, K73, K74, K75, K76, K77 }, \ | |||
{ KC_NO, KC_NO, K82, K83, K84, KC_NO, KC_NO, K87 }, \ | |||
{ K90, KC_NO, K92, KC_NO, KC_NO, K95, KC_NO, KC_NO }, \ | |||
} |
@ -0,0 +1,31 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches |