Merge remote-tracking branch 'origin/master' into develop

keyboards/bastardkb/charybdis/3x5/blackpill/config.h

@@ -58,5 +58,5 @@
 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B14
+#define POINTING_DEVICE_CS_PIN B14
 #define PMW33XX_CS_DIVISOR 64

keyboards/bastardkb/charybdis/3x5/blackpill/halconf.h

@@ -1,4 +1,4 @@
-/*
+/**
  * Copyright 2020 Nick Brassel (tzarc)
  * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
  *
@@ -20,10 +20,8 @@
 
 #define HAL_USE_PWM TRUE
 #define HAL_USE_SERIAL TRUE
-//#define HAL_USE_I2C TRUE
 #define HAL_USE_SPI TRUE
 #define SPI_USE_WAIT TRUE
 #define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-//#define HAL_USE_GPT TRUE
 
 #include_next "halconf.h"

keyboards/bastardkb/charybdis/3x5/blackpill/mcuconf.h

@@ -21,14 +21,6 @@
 
 #include_next "mcuconf.h"
 
-#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 TRUE
-
-#undef STM32_I2C_I2C1_RX_DMA_STREAM
-#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#undef STM32_I2C_I2C1_TX_DMA_STREAM
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-
 #undef STM32_PWM_USE_TIM2
 #define STM32_PWM_USE_TIM2 TRUE
 
@@ -46,14 +38,6 @@
 #undef STM32_SERIAL_USE_USART1
 #define STM32_SERIAL_USE_USART1 TRUE
 
-// #undef STM32_SERIAL_USE_USART2
-// #define STM32_SERIAL_USE_USART2 TRUE
-
-// #undef STM32_UART_USART2_RX_DMA_STREAM
-// #define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-// #undef STM32_UART_USART2_TX_DMA_STREAM
-// #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-
 #undef STM32_GPT_USE_TIM4
 #define STM32_GPT_USE_TIM4 TRUE
 

keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk

@@ -24,10 +24,8 @@ RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by def
 RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 RGB_MATRIX_DRIVER = WS2812
 
-# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on
-# the trackball side).
 SPLIT_KEYBOARD = yes
-LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout
+LAYOUTS = split_3x5_3
 
 POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360

keyboards/bastardkb/charybdis/3x5/keymaps/default/keymap.c

@@ -14,6 +14,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include QMK_KEYBOARD_H
 
 enum charybdis_keymap_layers {

keyboards/bastardkb/charybdis/3x5/v1/elitec/config.h

@@ -39,4 +39,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B0
+#define POINTING_DEVICE_CS_PIN B0

keyboards/bastardkb/charybdis/3x5/v2/elitec/config.h

@@ -33,4 +33,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN F0
+#define POINTING_DEVICE_CS_PIN F0

keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h

@@ -20,8 +20,6 @@
 /* Key matrix configuration. */
 #define MATRIX_ROW_PINS \
     { GP26, GP5, GP4, GP9 }
-#define MATRIX_COL_PINS \
-    { GP28, GP15, GP6, GP7, GP8 }
 
 /* Handedness. */
 #define MASTER_RIGHT
@@ -39,12 +37,74 @@
 
 /* SPI & PMW3360 settings. */
 #define SPI_DRIVER SPID0
-#define SPI_SCK_PIN GP18
-#define SPI_MOSI_PIN GP19
 #define SPI_MISO_PIN GP20
-#define PMW33XX_CS_PIN GP14
 
 /* Reset. */
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
+
+/** RGB Matrix. */
+
+#ifdef RGB_MATRIX_ENABLE
+// Enable all animations on ARM boards since they have plenty of memory
+// available for it.
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+// Limit maximum brightness to keep power consumption reasonable, and avoid
+// disconnects.
+#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
+
+// Rainbow swirl as startup mode.
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+// Slow swirl at startup.
+#    define RGB_MATRIX_STARTUP_SPD 32
+
+// Startup values.
+#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
+#endif // RGB_MATRIX_ENABLE

keyboards/bastardkb/charybdis/3x5/v2/splinky/readme.md

@@ -0,0 +1,6 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See https://github.com/plut0nium/0xB2/#releases to figure out the right version
+for you (v2 and v3) supported.

keyboards/bastardkb/dilemma/splinky/splinky.c → keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/config.h

@@ -15,19 +15,13 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "quantum.h"
+#pragma once
 
-// Forward declare RP2040 SDK declaration.
-void gpio_init(uint gpio);
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP28, GP15, GP6, GP7, GP8 }
 
-void keyboard_pre_init_kb(void) {
-    // Ensures that GP26 through GP29 are initialized as digital inputs (as
-    // opposed to analog inputs).  These GPIOs are shared with A0 through A3,
-    // respectively.  On RP2040-B2 and later, the digital inputs are disabled by
-    // default (see RP2040-E6).
-    gpio_init(GP26);
-    gpio_init(GP27);
-    gpio_init(GP28);
-    gpio_init(GP29);
-    keyboard_pre_init_user();
-}
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP18
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14

keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP28, GP21, GP6, GP7, GP8 }
+
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP22
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16

keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/3x5/v2/stemcell/config.h

@@ -0,0 +1,63 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { F7, C6, D4, B5 }
+#define MATRIX_COL_PINS \
+    { F5, B6, D7, E6, B4 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define A0 PAL_LINE(GPIOA, 0)
+// #define SPLIT_HAND_PIN A0
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN D2
+
+/* RGB settings. */
+#define RGB_DI_PIN D3
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 4
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+
+/* CRC. */
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+/* SPI config for pmw3360 sensor. */
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B1
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B2
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B3
+#define SPI_MISO_PAL_MODE 5
+
+/* PMW3360 settings. */
+#define A1 PAL_LINE(GPIOA, 1)
+#define POINTING_DEVICE_CS_PIN A1
+#define PMW3360_CS_MODE 3
+#define PMW3360_CS_DIVISOR 64

keyboards/bastardkb/charybdis/3x5/v2/stemcell/halconf.h

@@ -0,0 +1,24 @@
+/*
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+#define HAL_USE_SERIAL TRUE
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>

keyboards/bastardkb/charybdis/3x5/v2/stemcell/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis Nano (3x5) STeMCell",
+    "usb": {
+      "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/charybdis/3x5/v2/stemcell/mcuconf.h

@@ -0,0 +1,32 @@
+/*
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 FALSE
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5

keyboards/bastardkb/charybdis/3x5/v2/stemcell/rules.mk

@@ -0,0 +1,38 @@
+# MCU name
+MCU = STM32F411
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+CONVERT_TO = stemcell
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x5_3
+
+POINTING_DEVICE_ENABLE = yes # Enable trackball
+POINTING_DEVICE_DRIVER = pmw3360
+MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
+KEYBOARD_SHARED_EP = yes
+
+SERIAL_DRIVER = usart
+WS2812_DRIVER = pwm
+
+DEBOUNCE_TYPE = asym_eager_defer_pk

keyboards/bastardkb/charybdis/3x6/blackpill/config.h

@@ -56,5 +56,5 @@
 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B14
+#define POINTING_DEVICE_CS_PIN B14
 #define PMW33XX_CS_DIVISOR 64

keyboards/bastardkb/charybdis/3x6/blackpill/halconf.h

@@ -1,4 +1,5 @@
-/*
+/**
+ * Copyright 2020 Nick Brassel (tzarc)
  * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
  *
  * This program is free software: you can redistribute it and/or modify

keyboards/bastardkb/charybdis/3x6/blackpill/mcuconf.h

@@ -1,4 +1,6 @@
 /*
+ * Copyright 2020 Nick Brassel (tzarc)
+ * Copyright 2021 Stefan Kerkmann (@KarlK90)
  * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
  *
  * This program is free software: you can redistribute it and/or modify

keyboards/bastardkb/charybdis/3x6/v1/elitec/config.h

@@ -38,4 +38,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B0
+#define POINTING_DEVICE_CS_PIN B0

keyboards/bastardkb/charybdis/3x6/v2/elitec/config.h

@@ -33,4 +33,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN F0
+#define POINTING_DEVICE_CS_PIN F0

keyboards/bastardkb/charybdis/3x6/v2/splinky/config.h

@@ -20,8 +20,6 @@
 /* Key matrix configuration. */
 #define MATRIX_ROW_PINS \
     { GP26, GP5, GP4, GP9 }
-#define MATRIX_COL_PINS \
-    { GP27, GP28, GP15, GP6, GP7, GP8 }
 
 /* Handedness. */
 #define MASTER_RIGHT
@@ -39,10 +37,7 @@
 
 /* SPI & PMW3360 settings. */
 #define SPI_DRIVER SPID0
-#define SPI_SCK_PIN GP18
-#define SPI_MOSI_PIN GP19
 #define SPI_MISO_PIN GP20
-#define PMW33XX_CS_PIN GP14
 
 /* Reset. */
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET

keyboards/bastardkb/charybdis/3x6/v2/splinky/readme.md

@@ -0,0 +1,6 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See https://github.com/plut0nium/0xB2/#releases to figure out the right version
+for you (v2 and v3) supported.

keyboards/bastardkb/charybdis/3x6/v2/splinky/v2/config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP15, GP6, GP7, GP8 }
+
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP18
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14

keyboards/bastardkb/charybdis/3x6/v2/splinky/v2/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/3x6/v2/splinky/v3/config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP21, GP6, GP7, GP8 }
+
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP22
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16

keyboards/bastardkb/charybdis/3x6/v2/splinky/v3/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/3x6/v2/stemcell/config.h

@@ -0,0 +1,63 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { F7, C6, D4, B5 }
+#define MATRIX_COL_PINS \
+    { F6, F5, B6, D7, E6, B4 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define A0 PAL_LINE(GPIOA, 0)
+// #define SPLIT_HAND_PIN A0
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN D2
+
+/* RGB settings. */
+#define RGB_DI_PIN D3
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 4
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+
+/* CRC. */
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+/* SPI config for pmw3360 sensor. */
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B1
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B2
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B3
+#define SPI_MISO_PAL_MODE 5
+
+/* PMW3360 settings. */
+#define A1 PAL_LINE(GPIOA, 1)
+#define POINTING_DEVICE_CS_PIN A1
+#define PMW3360_CS_MODE 3
+#define PMW3360_CS_DIVISOR 64

keyboards/bastardkb/charybdis/3x6/v2/stemcell/halconf.h

@@ -0,0 +1,24 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+#define HAL_USE_SERIAL TRUE
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>

keyboards/bastardkb/charybdis/3x6/v2/stemcell/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis Mini (3x6) STeMCell",
+    "usb": {
+      "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/charybdis/3x6/v2/stemcell/mcuconf.h

@@ -0,0 +1,32 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 FALSE
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5

keyboards/bastardkb/charybdis/3x6/v2/stemcell/rules.mk

@@ -0,0 +1,38 @@
+# MCU name
+MCU = STM32F411
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+CONVERT_TO = stemcell
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x6_3
+
+POINTING_DEVICE_ENABLE = yes # Enable trackball
+POINTING_DEVICE_DRIVER = pmw3360
+MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
+KEYBOARD_SHARED_EP = yes
+
+SERIAL_DRIVER = usart
+WS2812_DRIVER = pwm
+
+DEBOUNCE_TYPE = asym_eager_defer_pk

keyboards/bastardkb/charybdis/4x6/blackpill/config.h

@@ -58,5 +58,5 @@
 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B14
+#define POINTING_DEVICE_CS_PIN B14
 #define PMW33XX_CS_DIVISOR 64

keyboards/bastardkb/charybdis/4x6/blackpill/halconf.h

@@ -1,4 +1,4 @@
-/*
+/**
  * Copyright 2020 Nick Brassel (tzarc)
  * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
  *
@@ -20,10 +20,8 @@
 
 #define HAL_USE_PWM TRUE
 #define HAL_USE_SERIAL TRUE
-//#define HAL_USE_I2C TRUE
 #define HAL_USE_SPI TRUE
 #define SPI_USE_WAIT TRUE
 #define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-//#define HAL_USE_GPT TRUE
 
 #include_next "halconf.h"

keyboards/bastardkb/charybdis/4x6/blackpill/mcuconf.h

@@ -21,14 +21,6 @@
 
 #include_next "mcuconf.h"
 
-#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 TRUE
-
-#undef STM32_I2C_I2C1_RX_DMA_STREAM
-#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-#undef STM32_I2C_I2C1_TX_DMA_STREAM
-#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-
 #undef STM32_PWM_USE_TIM2
 #define STM32_PWM_USE_TIM2 TRUE
 
@@ -46,14 +38,6 @@
 #undef STM32_SERIAL_USE_USART1
 #define STM32_SERIAL_USE_USART1 TRUE
 
-// #undef STM32_SERIAL_USE_USART2
-// #define STM32_SERIAL_USE_USART2 TRUE
-
-// #undef STM32_UART_USART2_RX_DMA_STREAM
-// #define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-// #undef STM32_UART_USART2_TX_DMA_STREAM
-// #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-
 #undef STM32_GPT_USE_TIM4
 #define STM32_GPT_USE_TIM4 TRUE
 

keyboards/bastardkb/charybdis/4x6/blackpill/rules.mk

@@ -24,8 +24,6 @@ RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by def
 RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 RGB_MATRIX_DRIVER = WS2812
 
-# Charybdis is a split 4x6 keyboard with a maximum of 5 thumb keys (3 on the
-# trackball side).
 SPLIT_KEYBOARD = yes
 
 POINTING_DEVICE_ENABLE = yes # Enable trackball

keyboards/bastardkb/charybdis/4x6/v1/elitec/config.h

@@ -39,4 +39,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN B0
+#define POINTING_DEVICE_CS_PIN B0

keyboards/bastardkb/charybdis/4x6/v2/elitec/config.h

@@ -33,4 +33,4 @@
 #define RGB_DI_PIN D3
 
 /* PMW3360 settings. */
-#define PMW33XX_CS_PIN F0
+#define POINTING_DEVICE_CS_PIN F0

keyboards/bastardkb/charybdis/4x6/v2/splinky/config.h

@@ -20,8 +20,6 @@
 /* Key matrix configuration. */
 #define MATRIX_ROW_PINS \
     { GP29, GP26, GP5, GP4, GP9 }
-#define MATRIX_COL_PINS \
-    { GP27, GP28, GP15, GP6, GP7, GP8 }
 
 /* Handedness. */
 #define MASTER_RIGHT
@@ -39,10 +37,7 @@
 
 /* SPI & PMW3360 settings. */
 #define SPI_DRIVER SPID0
-#define SPI_SCK_PIN GP18
-#define SPI_MOSI_PIN GP19
 #define SPI_MISO_PIN GP20
-#define PMW33XX_CS_PIN GP14
 
 /* Reset. */
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET

keyboards/bastardkb/charybdis/4x6/v2/splinky/readme.md

@@ -0,0 +1,6 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See https://github.com/plut0nium/0xB2/#releases to figure out the right version
+for you (v2 and v3) supported.

keyboards/bastardkb/charybdis/4x6/v2/splinky/v2/config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP15, GP6, GP7, GP8 }
+
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP18
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14

keyboards/bastardkb/charybdis/4x6/v2/splinky/v2/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/4x6/v2/splinky/v3/config.h

@@ -0,0 +1,27 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP21, GP6, GP7, GP8 }
+
+/* SPI & PMW3360 settings. */
+#define SPI_SCK_PIN GP22
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16

keyboards/bastardkb/charybdis/4x6/v2/splinky/v3/rules.mk

@@ -0,0 +1,2 @@
+# Intentionally blank so that QMK detects this folder as a valid keyboard
+# parameter.

keyboards/bastardkb/charybdis/4x6/v2/stemcell/config.h

@@ -0,0 +1,63 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { F4, F7, C6, D4, B5 }
+#define MATRIX_COL_PINS \
+    { F6, F5, B6, D7, E6, B4 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define A0 PAL_LINE(GPIOA, 0)
+// #define SPLIT_HAND_PIN A0
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN D2
+
+/* RGB settings. */
+#define RGB_DI_PIN D3
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 4
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM7
+#define WS2812_DMA_CHANNEL 3
+
+/* CRC. */
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+/* SPI config for pmw3360 sensor. */
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN B1
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN B2
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN B3
+#define SPI_MISO_PAL_MODE 5
+
+/* PMW3360 settings. */
+#define A1 PAL_LINE(GPIOA, 1)
+#define POINTING_DEVICE_CS_PIN A1
+#define PMW3360_CS_MODE 3
+#define PMW3360_CS_DIVISOR 64

keyboards/bastardkb/charybdis/4x6/v2/stemcell/halconf.h

@@ -0,0 +1,24 @@
+/*
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+#define HAL_USE_SERIAL TRUE
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>

keyboards/bastardkb/charybdis/4x6/v2/stemcell/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis (4x6) STeMCell",
+    "usb": {
+      "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/charybdis/4x6/v2/stemcell/mcuconf.h

@@ -0,0 +1,32 @@
+/*
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 FALSE
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 5

keyboards/bastardkb/charybdis/4x6/v2/stemcell/rules.mk

@@ -0,0 +1,37 @@
+# MCU name
+MCU = STM32F411
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+CONVERT_TO = stemcell
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+
+POINTING_DEVICE_ENABLE = yes # Enable trackball
+POINTING_DEVICE_DRIVER = pmw3360
+MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
+KEYBOARD_SHARED_EP = yes
+
+SERIAL_DRIVER = usart
+WS2812_DRIVER = pwm
+
+DEBOUNCE_TYPE = asym_eager_defer_pk

keyboards/bastardkb/charybdis/readme.md

@@ -21,6 +21,7 @@ Check out the [keyboard build guides](https://docs.bastardkb.com) for the Charyb
 **You must specify the shield version when compiling/flashing the firmware.**
 
 The template is:
+
 ```shell
 qmk compile -kb bastardkb/charybdis/{LAYOUT}/{VERSION}/elitec -km {KEYMAP}
 ```
@@ -33,16 +34,16 @@ Check out the `via` layout if you're looking for VIA support.
 
 ### Charybdis (4x6)
 
-| Shield Version | default                                                         | via                                                             |
-|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------|
-| v1             | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km via`     |
+| Shield Version | default                                                         | via                                                         |
+| -------------- | --------------------------------------------------------------- | ----------------------------------------------------------- |
+| v1             | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km via` |
 | v2             | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km via` |
 
 ### Charybdis (3x5)
 
-| Shield Version | default                                                         | via                                                             |
-|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------|
-| v1             | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km via`     |
+| Shield Version | default                                                         | via                                                         |
+| -------------- | --------------------------------------------------------------- | ----------------------------------------------------------- |
+| v1             | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km via` |
 | v2             | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km via` |
 
 ## Customizing the firmware
@@ -164,17 +165,17 @@ To disable the custom keycodes, and reduce binary size, simply add a definition
 
 ### Configuration Syncing
 
-If you want/need to enable syncing of the charybdis config, such as to read the sniping or drag scroll modes on the other half (such as for displaying the status via rgb matrix, or added on screens, or what not), you can enabled this.  To do so, add this to your `config.h`: 
+If you want/need to enable syncing of the charybdis config, such as to read the sniping or drag scroll modes on the other half (such as for displaying the status via rgb matrix, or added on screens, or what not), you can enabled this. To do so, add this to your `config.h`:
 
 ```c
 #define CHARYBDIS_CONFIG_SYNC
 ```
 
-Note that you will need to reflash both sides when enabling this. 
+Note that you will need to reflash both sides when enabling this.
 
 ### Enable Large Mouse Reports
 
-By default, the X and Y motion for the pointing device/mouse reports is -127 to 127.  You can definitely hit the limit for that with the sensors.  You can enable support for -32767 to 32767 by adding this to your `config.h`:
+By default, the X and Y motion for the pointing device/mouse reports is -127 to 127. You can definitely hit the limit for that with the sensors. You can enable support for -32767 to 32767 by adding this to your `config.h`:
 
 ```c
 #define MOUSE_EXTENDED_REPORT

keyboards/bastardkb/dilemma/3x5_2/3x5_2.h

@@ -0,0 +1,37 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// clang-format off
+#define LAYOUT_split_3x5_2(                             \
+  k00, k01, k02, k03, k04,     k44, k43, k42, k41, k40, \
+  k10, k11, k12, k13, k14,     k54, k53, k52, k51, k50, \
+  k20, k21, k22, k23, k24,     k64, k63, k62, k61, k60, \
+                 k30, k32,     k72, k70                 \
+)                                                       \
+{                                                       \
+  {   k00,   k01,   k02,   k03,   k04 },                \
+  {   k10,   k11,   k12,   k13,   k14 },                \
+  {   k20,   k21,   k22,   k23,   k24 },                \
+  {   k30, KC_NO,   k32, KC_NO, KC_NO },                \
+  {   k40,   k41,   k42,   k43,   k44 },                \
+  {   k50,   k51,   k52,   k53,   k54 },                \
+  {   k60,   k61,   k62,   k63,   k64 },                \
+  {   k70, KC_NO,   k72, KC_NO, KC_NO },                \
+}
+// clang-format on

keyboards/bastardkb/dilemma/3x5_2/assembled/config.h

@@ -0,0 +1,46 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP4, GP5, GP28, GP26 }
+#define MATRIX_COL_PINS \
+    { GP8, GP9, GP7, GP6, GP27 }
+
+/* Handedness. */
+#define SPLIT_HAND_PIN GP29
+#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* CRC. */
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+/* Cirque trackpad. */
+#define SPI_SCK_PIN GP22
+#define SPI_MOSI_PIN GP23
+#define SPI_MISO_PIN GP20
+#define POINTING_DEVICE_CS_PIN GP21
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/dilemma/3x5_2/assembled/halconf.h

@@ -0,0 +1,22 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_SPI TRUE
+
+#include_next "halconf.h"

keyboards/bastardkb/dilemma/3x5_2/assembled/info.json

@@ -0,0 +1,4 @@
+{
+    "keyboard_name": "Dilemma (3x5+2) Assembled"
+}
+

keyboards/bastardkb/dilemma/3x5_2/assembled/mcuconf.h

@@ -0,0 +1,23 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef RP_SPI_USE_SPI1
+#define RP_SPI_USE_SPI1 TRUE

keyboards/bastardkb/dilemma/3x5_2/assembled/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = no   # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = no     # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = no      # Enable keyboard RGB matrix functionality
+
+SERIAL_DRIVER = vendor
+
+POINTING_DEVICE_ENABLE = yes
+POINTING_DEVICE_DRIVER = cirque_pinnacle_spi # Assembled version uses SPI.
+
+SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x5_2
+
+# RP2040-specific options
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.

keyboards/bastardkb/dilemma/3x5_2/info.json

@@ -0,0 +1,46 @@
+{
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x1835"
+    },
+    "layouts": {
+        "LAYOUT_split_3x5_2": {
+            "layout": [
+                {"label":"L00", "x":0, "y":0},
+                {"label":"L01", "x":1, "y":0},
+                {"label":"L02", "x":2, "y":0},
+                {"label":"L03", "x":3, "y":0},
+                {"label":"L04", "x":4, "y":0},
+                {"label":"R00", "x":11, "y":0},
+                {"label":"R01", "x":12, "y":0},
+                {"label":"R02", "x":13, "y":0},
+                {"label":"R03", "x":14, "y":0},
+                {"label":"R04", "x":15, "y":0},
+                {"label":"L10", "x":0, "y":1},
+                {"label":"L11", "x":1, "y":1},
+                {"label":"L12", "x":2, "y":1},
+                {"label":"L13", "x":3, "y":1},
+                {"label":"L14", "x":4, "y":1},
+                {"label":"R10", "x":11, "y":1},
+                {"label":"R11", "x":12, "y":1},
+                {"label":"R12", "x":13, "y":1},
+                {"label":"R13", "x":14, "y":1},
+                {"label":"R14", "x":15, "y":1},
+                {"label":"L20", "x":0, "y":2},
+                {"label":"L21", "x":1, "y":2},
+                {"label":"L22", "x":2, "y":2},
+                {"label":"L23", "x":3, "y":2},
+                {"label":"L24", "x":4, "y":2},
+                {"label":"R20", "x":11, "y":2},
+                {"label":"R21", "x":12, "y":2},
+                {"label":"R22", "x":13, "y":2},
+                {"label":"R23", "x":14, "y":2},
+                {"label":"R24", "x":15, "y":2},
+                {"label":"L30", "x":4, "y":3},
+                {"label":"L32", "x":5, "y":3},
+                {"label":"R32", "x":10, "y":3},
+                {"label":"R30", "x":11, "y":3}
+            ]
+        }
+    }
+}

keyboards/bastardkb/dilemma/3x5_2/keymaps/via/config.h

@@ -0,0 +1,91 @@
+/**
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifdef VIA_ENABLE
+/* VIA configuration. */
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 6
+#endif // VIA_ENABLE
+
+/* Disable unused features. */
+#define NO_ACTION_ONESHOT
+
+#ifndef TAPPING_TERM
+/**
+ * \brief Configure the global tapping term (default: 200ms).
+ *
+ * If you have a lot of accidental mod activations, crank up the tapping term.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
+ */
+#    define TAPPING_TERM 200
+#endif // TAPPING_TERM
+
+/**
+ * \brief Enable rapid switch from tap to hold.
+ *
+ * Note that a side-effect of this setting is to disable auto-repeat when
+ * pressing key twice, except for one-shot keys.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
+ */
+#define TAPPING_FORCE_HOLD
+
+/*
+ * Tap-or-Hold decision modes.
+ *
+ * Note that the following flags behave differently when combined (ie. when 2 or
+ * more are enabled).
+ *
+ * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
+ * decision modes.
+ */
+
+/**
+ * \brief Faster tap-hold trigger.
+ *
+ * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
+ * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
+ */
+#define PERMISSIVE_HOLD
+
+/**
+ * \brief Prevent normal rollover on alphas from accidentally triggering mods.
+ *
+ * Ignores key presses that interrupt a mod-tap.  Must-have for Home Row mod.
+ *
+ * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
+ * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
+ */
+#define IGNORE_MOD_TAP_INTERRUPT
+
+/* Charybdis-specific features. */
+
+#ifdef POINTING_DEVICE_ENABLE
+// Automatically enable the pointer layer when moving the trackball.  See also:
+// - `DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
+// - `DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
+// #define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+#endif // POINTING_DEVICE_ENABLE

keyboards/bastardkb/dilemma/3x5_2/keymaps/via/keymap.c

@@ -0,0 +1,229 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#ifdef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+#    include "timer.h"
+#endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+
+enum dilemma_keymap_layers {
+    LAYER_BASE = 0,
+    LAYER_FUNCTION,
+    LAYER_NAVIGATION,
+    LAYER_POINTER,
+    LAYER_NUMERAL,
+    LAYER_SYMBOLS,
+};
+
+// Automatically enable sniping-mode on the pointer layer.
+#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_POINTER
+
+#ifdef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+static uint16_t auto_pointer_layer_timer = 0;
+
+#    ifndef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
+#        define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
+#    endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
+
+#    ifndef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
+#        define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
+#    endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
+#endif     // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+
+#define SPC_NAV LT(LAYER_NAVIGATION, KC_SPC)
+#define TAB_FUN LT(LAYER_FUNCTION, KC_TAB)
+#define ENT_SYM LT(LAYER_SYMBOLS, KC_ENT)
+#define BSP_NUM LT(LAYER_NUMERAL, KC_BSPC)
+#define _L_PTR(KC) LT(LAYER_POINTER, KC)
+
+#ifndef POINTING_DEVICE_ENABLE
+#    define DRGSCRL KC_NO
+#    define DPI_MOD KC_NO
+#    define S_D_MOD KC_NO
+#    define SNIPING KC_NO
+#endif // !POINTING_DEVICE_ENABLE
+
+// clang-format off
+/** \brief QWERTY layout (3 rows, 10 columns). */
+#define LAYOUT_LAYER_BASE                                                                     \
+       KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, \
+       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_QUOT, \
+       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH, \
+                               TAB_FUN, SPC_NAV, ENT_SYM, BSP_NUM
+
+/** Convenience row shorthands. */
+#define _______________DEAD_HALF_ROW_______________ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+#define ______________HOME_ROW_GACS_L______________ KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX
+#define ______________HOME_ROW_GACS_R______________ XXXXXXX, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI
+
+/*
+ * Layers used on the Dilemma.
+ *
+ * These layers started off heavily inspired by the Miryoku layout, but trimmed
+ * down and tailored for a stock experience that is meant to be fundation for
+ * further personalization.
+ *
+ * See https://github.com/manna-harbour/miryoku for the original layout.
+ */
+
+/**
+ * \brief Function layer.
+ *
+ * Secondary right-hand layer has function keys mirroring the numerals on the
+ * primary layer with extras on the pinkie column, plus system keys on the inner
+ * column. App is on the tertiary thumb key and other thumb keys are duplicated
+ * from the base layer to enable auto-repeat.
+ */
+#define LAYOUT_LAYER_FUNCTION                                                                 \
+    _______________DEAD_HALF_ROW_______________, KC_PSCR,   KC_F7,   KC_F8,   KC_F9,  KC_F12, \
+    ______________HOME_ROW_GACS_L______________, KC_SLCK,   KC_F4,   KC_F5,   KC_F6,  KC_F11, \
+    _______________DEAD_HALF_ROW_______________, KC_PAUS,   KC_F1,   KC_F2,   KC_F3,  KC_F10, \
+                               _______, XXXXXXX, XXXXXXX, XXXXXXX
+
+/** \brief Mouse emulation and pointer functions. */
+#define LAYOUT_LAYER_POINTER                                                                  \
+    QK_BOOT, XXXXXXX, XXXXXXX, DPI_MOD, S_D_MOD, S_D_MOD, DPI_MOD, XXXXXXX, XXXXXXX, QK_BOOT, \
+    ______________HOME_ROW_GACS_L______________, ______________HOME_ROW_GACS_R______________, \
+    _______, DRGSCRL, SNIPING, KC_BTN3, XXXXXXX, XXXXXXX, KC_BTN3, SNIPING, DRGSCRL, _______, \
+                               KC_BTN2, KC_BTN1, KC_BTN1, KC_BTN2
+
+/**
+ * \brief Navigation layer.
+ *
+ * Primary right-hand layer (left home thumb) is navigation and editing. Cursor
+ * keys are on the home position, line and page movement below, clipboard above,
+ * caps lock and insert on the inner column. Thumb keys are duplicated from the
+ * base layer to avoid having to layer change mid edit and to enable auto-repeat.
+ */
+#define LAYOUT_LAYER_NAVIGATION                                                               \
+    _______________DEAD_HALF_ROW_______________, _______________DEAD_HALF_ROW_______________, \
+    ______________HOME_ROW_GACS_L______________, KC_CLCK, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT, \
+    _______________DEAD_HALF_ROW_______________,  KC_INS, KC_HOME, KC_PGDN, KC_PGUP,  KC_END, \
+                               XXXXXXX, _______,  KC_ENT, KC_BSPC
+
+/**
+ * \brief Numeral layout.
+ *
+ * Primary left-hand layer (right home thumb) is numerals and symbols. Numerals
+ * are in the standard numpad locations with symbols in the remaining positions.
+ * `KC_DOT` is duplicated from the base layer.
+ */
+#define LAYOUT_LAYER_NUMERAL                                                                  \
+    KC_LBRC,    KC_7,    KC_8,    KC_9, KC_RBRC, _______________DEAD_HALF_ROW_______________, \
+    KC_SCLN,    KC_4,    KC_5,    KC_6,  KC_EQL, ______________HOME_ROW_GACS_R______________, \
+     KC_DOT,    KC_1,    KC_2,    KC_3, KC_BSLS, _______________DEAD_HALF_ROW_______________, \
+                               KC_MINS,    KC_0, XXXXXXX, _______
+
+/**
+ * \brief Symbols layer.
+ *
+ * Secondary left-hand layer has shifted symbols in the same locations to reduce
+ * chording when using mods with shifted symbols. `KC_LPRN` is duplicated next to
+ * `KC_RPRN`.
+ */
+#define LAYOUT_LAYER_SYMBOLS                                                                  \
+    KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, _______________DEAD_HALF_ROW_______________, \
+    KC_COLN,  KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GACS_R______________, \
+    KC_TILD, KC_EXLM,   KC_AT, KC_HASH, KC_PIPE, _______________DEAD_HALF_ROW_______________, \
+                                KC_GRV, KC_UNDS, _______, XXXXXXX
+
+/**
+ * \brief Add Home Row mod to a layout.
+ *
+ * Expects a 10-key per row layout.  Adds support for GACS (Gui, Alt, Ctl, Shift)
+ * home row.  The layout passed in parameter must contain at least 20 keycodes.
+ *
+ * This is meant to be used with `LAYER_ALPHAS_QWERTY` defined above, eg.:
+ *
+ *     HOME_ROW_MOD_GACS(LAYER_ALPHAS_QWERTY)
+ */
+#define _HOME_ROW_MOD_GACS(                                            \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,                  \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,                  \
+    ...)                                                               \
+             L00,         L01,         L02,         L03,         L04,  \
+             R05,         R06,         R07,         R08,         R09,  \
+      LGUI_T(L10), LALT_T(L11), LCTL_T(L12), LSFT_T(L13),        L14,  \
+             R15,  RSFT_T(R16), RCTL_T(R17), LALT_T(R18), RGUI_T(R19), \
+      __VA_ARGS__
+#define HOME_ROW_MOD_GACS(...) _HOME_ROW_MOD_GACS(__VA_ARGS__)
+
+/**
+ * \brief Add pointer layer keys to a layout.
+ *
+ * Expects a 10-key per row layout.  The layout passed in parameter must contain
+ * at least 30 keycodes.
+ *
+ * This is meant to be used with `LAYER_ALPHAS_QWERTY` defined above, eg.:
+ *
+ *     POINTER_MOD(LAYER_ALPHAS_QWERTY)
+ */
+#define _POINTER_MOD(                                                  \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,                  \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,                  \
+    L20, L21, L22, L23, L24, R25, R26, R27, R28, R29,                  \
+    ...)                                                               \
+             L00,         L01,         L02,         L03,         L04,  \
+             R05,         R06,         R07,         R08,         R09,  \
+             L10,         L11,         L12,         L13,         L14,  \
+             R15,         R16,         R17,         R18,         R19,  \
+      _L_PTR(L20),        L21,         L22,         L23,         L24,  \
+             R25,         R26,         R27,         R28,  _L_PTR(R29), \
+      __VA_ARGS__
+#define POINTER_MOD(...) _POINTER_MOD(__VA_ARGS__)
+
+#define LAYOUT_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [LAYER_BASE] = LAYOUT_wrapper(
+    POINTER_MOD(HOME_ROW_MOD_GACS(LAYOUT_LAYER_BASE))
+  ),
+  [LAYER_FUNCTION] = LAYOUT_wrapper(LAYOUT_LAYER_FUNCTION),
+  [LAYER_NAVIGATION] = LAYOUT_wrapper(LAYOUT_LAYER_NAVIGATION),
+  [LAYER_NUMERAL] = LAYOUT_wrapper(LAYOUT_LAYER_NUMERAL),
+  [LAYER_POINTER] = LAYOUT_wrapper(LAYOUT_LAYER_POINTER),
+  [LAYER_SYMBOLS] = LAYOUT_wrapper(LAYOUT_LAYER_SYMBOLS),
+};
+// clang-format on
+
+#ifdef POINTING_DEVICE_ENABLE
+#    ifdef DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
+    if (abs(mouse_report.x) > DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD || abs(mouse_report.y) > DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD) {
+        if (auto_pointer_layer_timer == 0) {
+            layer_on(LAYER_POINTER);
+        }
+        auto_pointer_layer_timer = timer_read();
+    }
+    return mouse_report;
+}
+
+void matrix_scan_user(void) {
+    if (auto_pointer_layer_timer != 0 && TIMER_DIFF_16(timer_read(), auto_pointer_layer_timer) >= DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS) {
+        auto_pointer_layer_timer = 0;
+        layer_off(LAYER_POINTER);
+    }
+}
+#    endif // DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+
+#    ifdef DILEMMA_AUTO_SNIPING_ON_LAYER
+layer_state_t layer_state_set_user(layer_state_t state) {
+    dilemma_set_pointer_sniping_enabled(layer_state_cmp(state, DILEMMA_AUTO_SNIPING_ON_LAYER));
+    return state;
+}
+#    endif // DILEMMA_AUTO_SNIPING_ON_LAYER
+#endif     // POINTING_DEVICE_ENABLE

keyboards/bastardkb/dilemma/3x5_2/keymaps/via/readme.md

@@ -0,0 +1,67 @@
+# Dilemma `via` keymap
+
+The Dilemma `via` keymap is based on a QWERTY layout with [home row mods](https://precondition.github.io/home-row-mods) and [Miryoku-inspired layers](https://github.com/manna-harbour/miryoku), and some features and changes specific to the Dilemma.
+
+This layout also supports VIA.
+
+## Customizing the keymap
+
+### Dynamic DPI scaling
+
+Use the following keycodes to change the default DPI:
+
+-   `POINTER_DEFAULT_DPI_FORWARD`: increases the DPI; decreases when shifted;
+-   `POINTER_DEFAULT_DPI_REVERSE`: decreases the DPI; increases when shifted.
+
+There's a maximum of 16 possible values for the sniping mode DPI. See the [Dilemma documentation](../../README.md) for more information.
+
+Use the following keycodes to change the sniping mode DPI:
+
+-   `POINTER_SNIPING_DPI_FORWARD`: increases the DPI; decreases when shifted;
+-   `POINTER_SNIPING_DPI_REVERSE`: decreases the DPI; increases when shifted.
+
+There's a maximum of 4 possible values for the sniping mode DPI. See the [Dilemma documentation](../../README.md) for more information.
+
+### Drag-scroll
+
+Use the `DRAGSCROLL_MODE` keycode to enable drag-scroll on hold. Use the `DRAGSCROLL_TOGGLE` keycode to enable/disable drag-scroll on key press.
+
+### Circular scroll
+
+By default, the firmware is configured to enable the circular scroll feature on Cirque trackpad.
+
+To disable this, add the following to your keymap:
+
+```c
+#undef POINTING_DEVICE_GESTURES_SCROLL_ENABLE
+```
+
+### Sniping
+
+Use the `SNIPING_MODE` keycode to enable sniping mode on hold. Use the `SNIPING_TOGGLE` keycode to enable/disable sniping mode on key press.
+
+Change the value of `DILEMMA_AUTO_SNIPING_ON_LAYER` to automatically enable sniping mode on layer change. By default, sniping mode is enabled on the pointer layer:
+
+```c
+#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_POINTER
+```
+
+### Auto pointer layer
+
+The pointer layer can be automatically enabled when moving the trackball. To enable or disable this behavior, add or remove the following define:
+
+```c
+#define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+```
+
+By default, the layer is turned off 1 second after the last registered trackball movement:
+
+```c
+#define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
+```
+
+The trigger sensibility can also be tuned. The lower the value, the more sensible the trigger:
+
+```c
+#define DILEMMA_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
+```

keyboards/bastardkb/dilemma/3x5_2/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/bastardkb/dilemma/splinky/config.h → keyboards/bastardkb/dilemma/3x5_2/splinky/config.h

@@ -1,4 +1,4 @@
-/*
+/**
  * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
  *
  * This program is free software: you can redistribute it and/or modify

keyboards/bastardkb/dilemma/3x5_2/splinky/info.json

@@ -0,0 +1,3 @@
+{
+    "keyboard_name": "Dilemma (3x5+2) Splinky"
+}

keyboards/bastardkb/dilemma/rules.mk → keyboards/bastardkb/dilemma/3x5_2/splinky/rules.mk

@@ -1,3 +1,9 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
 # Build Options
 #   change yes to no to disable
 #
@@ -16,10 +22,13 @@ RGB_MATRIX_SUPPORTED = no   # RGB matrix is supported and enabled by default
 RGBLIGHT_SUPPORTED = no     # RGB underglow is supported, but not enabled by default
 RGB_MATRIX_ENABLE = no      # Enable keyboard RGB matrix functionality
 
+SERIAL_DRIVER = vendor
+
 POINTING_DEVICE_ENABLE = yes
-POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c
+POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c # DIY version uses I2C.
 
 SPLIT_KEYBOARD = yes
 LAYOUTS = split_3x5_2
 
-DEFAULT_FOLDER = bastardkb/dilemma/splinky
+# RP2040-specific options
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.

keyboards/bastardkb/dilemma/3x5_3/3x5_3.c

@@ -0,0 +1,83 @@
+/**
+ * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
+ * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Publicw License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "3x5_3.h"
+
+/**
+ * LEDs index.
+ *
+ * ╭────────────────────╮                 ╭────────────────────╮
+ *    2   3   8   9  12                     30  27  26  21  20
+ * ├────────────────────┤                 ├────────────────────┤
+ *    1   4   7  10  13                     31  28  25  22  19
+ * ├────────────────────┤                 ├────────────────────┤
+ *    0   5   6  11  14                     32  29  24  23  18
+ * ╰────────────────────╯                 ╰────────────────────╯
+ *                   15  16  17     35  34  33
+ *                 ╰────────────╯ ╰────────────╯
+ */
+// clang-format off
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    /* Key Matrix to LED index. */
+    // Left split.
+    {      2,      3,      8,      9,     12 }, // Top row
+    {      1,      4,      7,     10,     13 }, // Middle row
+    {      0,      5,      6,     11,     14 }, // Bottom row
+    {     17, NO_LED,     15,     16, NO_LED }, // Thumb cluster
+    // Right split.
+    {     20,     21,     26,     27,     30 }, // Top row
+    {     19,     22,     25,     28,     31 }, // Middle row
+    {     18,     23,     24,     29,     32 }, // Bottom row
+    {     35, NO_LED,     33,     34, NO_LED }, // Thumb cluster
+}, {
+    /* LED index to physical position. */
+    // Left split.
+    /* index=0  */ {   0,  42 }, {   0,  21 }, {   0,   0 }, // col 1 (left most)
+    /* index=3  */ {  18,   0 }, {  18,  21 }, {  18,  42 }, // col 2
+    /* index=6  */ {  36,  42 }, {  36,  21 }, {  36,   0 },
+    /* index=9  */ {  54,   0 }, {  54,  21 }, {  54,  42 },
+    /* index=12 */ {  72,   0 }, {  72,  21 }, {  72,  42 },
+    /* index=15 */ {  72,  64 }, {  90,  64 }, { 108,  64 }, // Thumb cluster
+    // Right split.
+    /* index=18 */ { 224,  42 }, { 224,  21 }, { 224,   0 }, // col 10 (right most)
+    /* index=21 */ { 206,   0 }, { 206,  21 }, { 206,  42 }, // col 9
+    /* index=24 */ { 188,  42 }, { 188,  21 }, { 188,   0 },
+    /* index=27 */ { 170,   0 }, { 170,  21 }, { 170,  42 },
+    /* index=30 */ { 152,   0 }, { 152,  21 }, { 152,  42 },
+    /* index=33 */ { 152,  64 }, { 134,  64 }, { 116,  64 }, // Thumb cluster
+}, {
+    /* LED index to flag. */
+    // Left split.
+    /* index=0  */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 1
+    /* index=3  */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 2
+    /* index=6  */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
+    /* index=9  */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
+    /* index=12 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
+    /* index=15 */ LED_FLAG_MODIFIER, LED_FLAG_MODIFIER, LED_FLAG_MODIFIER, // Thumb cluster
+    // Right split.
+    /* index=18 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 10
+    /* index=21 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 9
+    /* index=24 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
+    /* index=27 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
+    /* index=30 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
+    /* index=33 */ LED_FLAG_MODIFIER, LED_FLAG_MODIFIER, LED_FLAG_MODIFIER, // Thumb cluster
+} };
+#endif
+// clang-format on

keyboards/bastardkb/dilemma/3x5_3/3x5_3.h

@@ -0,0 +1,39 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "dilemma.h"
+
+// clang-format off
+#define LAYOUT_split_3x5_3(                             \
+  k00, k01, k02, k03, k04,     k44, k43, k42, k41, k40, \
+  k10, k11, k12, k13, k14,     k54, k53, k52, k51, k50, \
+  k20, k21, k22, k23, k24,     k64, k63, k62, k61, k60, \
+            k32, k30, k31,     k71, k70, k72            \
+)                                                       \
+{                                                       \
+  {   k00,   k01,   k02,   k03,   k04 },                \
+  {   k10,   k11,   k12,   k13,   k14 },                \
+  {   k20,   k21,   k22,   k23,   k24 },                \
+  {   k30,   k31,   k32, KC_NO, KC_NO },                \
+  {   k40,   k41,   k42,   k43,   k44 },                \
+  {   k50,   k51,   k52,   k53,   k54 },                \
+  {   k60,   k61,   k62,   k63,   k64 },                \
+  {   k70,   k71,   k72, KC_NO, KC_NO },                \
+}
+// clang-format on

keyboards/bastardkb/dilemma/3x5_3/config.h

@@ -0,0 +1,71 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP4, GP5, GP27, GP26 }
+#define MATRIX_COL_PINS \
+    { GP8, GP9, GP7, GP6, GP28 }
+
+/* Handedness. */
+#define SPLIT_HAND_PIN GP29
+#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0  // Per-key.
+// #define RGB_DI_PIN GP10 // Underglow.
+
+/* CRC. */
+#define CRC8_USE_TABLE
+#define CRC8_OPTIMIZE_SPEED
+
+/* Cirque trackpad over SPI. */
+#define SPI_SCK_PIN GP22
+#define SPI_MOSI_PIN GP23
+#define SPI_MISO_PIN GP20
+#define POINTING_DEVICE_CS_PIN GP21
+
+/* OLED over i2c. */
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_16_9
+#define OLED_DISPLAY_HEIGHT 128
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U
+
+/* RGB settings. */
+#define RGBLED_NUM 36
+#define RGBLED_SPLIT \
+    { 18, 18 }
+
+/* RGB matrix support. */
+#ifdef RGB_MATRIX_ENABLE
+#    define SPLIT_TRANSPORT_MIRROR
+#    define DRIVER_LED_TOTAL RGBLED_NUM
+#    define RGB_MATRIX_SPLIT RGBLED_SPLIT
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
+#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED
+#    define RGB_MATRIX_KEYPRESSES
+#endif

keyboards/bastardkb/dilemma/3x5_3/halconf.h

@@ -0,0 +1,23 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+#define HAL_USE_SPI TRUE
+
+#include_next "halconf.h"

keyboards/bastardkb/dilemma/3x5_3/info.json

@@ -0,0 +1,49 @@
+{
+    "keyboard_name": "Dilemma (3x5+3) Assembled",
+    "usb": {
+        "device_version": "2.0.0",
+        "pid": "0x1835"
+    },
+    "layouts": {
+        "LAYOUT_split_3x5_3": {
+            "layout": [
+                { "label": "L00", "x": 0, "y": 0 },
+                { "label": "L01", "x": 1, "y": 0 },
+                { "label": "L02", "x": 2, "y": 0 },
+                { "label": "L03", "x": 3, "y": 0 },
+                { "label": "L04", "x": 4, "y": 0 },
+                { "label": "R00", "x": 11, "y": 0 },
+                { "label": "R01", "x": 12, "y": 0 },
+                { "label": "R02", "x": 13, "y": 0 },
+                { "label": "R03", "x": 14, "y": 0 },
+                { "label": "R04", "x": 15, "y": 0 },
+                { "label": "L10", "x": 0, "y": 1 },
+                { "label": "L11", "x": 1, "y": 1 },
+                { "label": "L12", "x": 2, "y": 1 },
+                { "label": "L13", "x": 3, "y": 1 },
+                { "label": "L14", "x": 4, "y": 1 },
+                { "label": "R10", "x": 11, "y": 1 },
+                { "label": "R11", "x": 12, "y": 1 },
+                { "label": "R12", "x": 13, "y": 1 },
+                { "label": "R13", "x": 14, "y": 1 },
+                { "label": "R14", "x": 15, "y": 1 },
+                { "label": "L20", "x": 0, "y": 2 },
+                { "label": "L21", "x": 1, "y": 2 },
+                { "label": "L22", "x": 2, "y": 2 },
+                { "label": "L23", "x": 3, "y": 2 },
+                { "label": "L24", "x": 4, "y": 2 },
+                { "label": "R20", "x": 11, "y": 2 },
+                { "label": "R21", "x": 12, "y": 2 },
+                { "label": "R22", "x": 13, "y": 2 },
+                { "label": "R23", "x": 14, "y": 2 },
+                { "label": "R24", "x": 15, "y": 2 },
+                { "label": "L32", "x": 4, "y": 3 },
+                { "label": "L33", "x": 5, "y": 3 },
+                { "label": "L34", "x": 6, "y": 3 },
+                { "label": "R32", "x": 11, "y": 3 },
+                { "label": "R33", "x": 10, "y": 3 },
+                { "label": "R34", "x":  9, "y": 3 }
+            ]
+        }
+    }
+}

keyboards/bastardkb/dilemma/3x5_3/keymaps/bstiq/config.h

@@ -0,0 +1,145 @@
+/**
+ * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifdef VIA_ENABLE
+/* Via configuration. */
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 8
+#endif // VIA_ENABLE
+
+/**
+ * Configure the global tapping term (default: 200ms).
+ * If you have a lot of accidental mod activations, crank up the tapping term.
+ */
+#ifndef TAPPING_TERM
+#    define TAPPING_TERM 160
+#endif // TAPPING_TERM
+
+// disable trackpad taps
+// #define CIRQUE_PINNACLE_TAPPING_TERM 0
+
+/**
+ * Enable rapid switch from tap to hold.  Disable auto-repeat when pressing key
+ * twice, except for one-shot keys.
+ */
+#define TAPPING_FORCE_HOLD
+
+/*
+ * Tap-or-Hold decision modes.
+ *
+ * Note that the following flags behave differently when combined (ie. when 2 or
+ * more are enabled).
+ *
+ * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
+ * decision modes.
+ */
+
+/**
+ * Faster tap-hold trigger.
+ *
+ * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
+ * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
+ */
+#define PERMISSIVE_HOLD
+
+/**
+ * Prevent normal rollover on alphas from accidentally triggering mods.
+ *
+ * Ignores key presses that interrupt a mod-tap.  Must-have for Home Row mod.
+ *
+ * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
+ * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
+ */
+#define IGNORE_MOD_TAP_INTERRUPT
+
+/** Dilemma-specific features. */
+
+#ifdef POINTING_DEVICE_ENABLE
+// Flip horizontal direction for drag-scroll.
+#    define DILEMMA_DRAGSCROLL_REVERSE_X
+// #define DILEMMA_DRAGSCROLL_REVERSE_Y
+#endif // POINTING_DEVICE_ENABLE
+
+/** RGB Matrix. */
+
+#ifdef RGB_MATRIX_ENABLE
+// Enable all animations on ARM boards since they have plenty of memory
+// available for it.
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define ENABLE_RGB_MATRIX_DUAL_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define ENABLE_RGB_MATRIX_RAINDROPS
+#    define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    define ENABLE_RGB_MATRIX_HUE_BREATHING
+#    define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#    define ENABLE_RGB_MATRIX_HUE_WAVE
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+// Limit maximum brightness to keep power consumption reasonable, and avoid
+// disconnects.
+#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
+
+// Rainbow swirl as startup mode.
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+// Slow swirl at startup.
+#    define RGB_MATRIX_STARTUP_SPD 32
+
+// Startup values.
+#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
+#endif // RGB_MATRIX_ENABLE

keyboards/bastardkb/dilemma/3x5_3/keymaps/bstiq/keymap.c

@@ -0,0 +1,223 @@
+/**
+ * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum bstiq_layers {
+    LAYER_BASE = 0,
+    LAYER_MBO,
+    LAYER_MEDIA,
+    LAYER_NAV,
+    LAYER_MOUSE,
+    LAYER_SYM,
+    LAYER_NUM,
+    LAYER_FUN,
+};
+
+// Automatically enable sniping when the mouse layer is on.
+#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_MOUSE
+
+#define BSP_NAV LT(LAYER_NAV, KC_BSPC)
+#define ENT_MBO LT(LAYER_MBO, KC_ENT)
+#define TAB_MED LT(LAYER_MEDIA, KC_TAB)
+#define ESC_SYM LT(LAYER_SYM, KC_ESC)
+#define SPC_NUM LT(LAYER_NUM, KC_SPC)
+#define SPC_MBO LT(LAYER_MBO, KC_SPC)
+#define MOUSE(KC) LT(LAYER_MOUSE, KC)
+
+#define USR_RDO KC_AGAIN
+#define USR_PST S(KC_INS)
+#define USR_CPY C(KC_INS)
+#define USR_CUT S(KC_DEL)
+#define USR_UND KC_UNDO
+
+#define MS_L KC_MS_LEFT
+#define MS_R KC_MS_RIGHT
+#define MS_D KC_MS_DOWN
+#define MS_U KC_MS_UP
+
+#define WH_L KC_MS_WH_LEFT
+#define WH_R KC_MS_WH_RIGHT
+#define WH_D KC_MS_WH_DOWN
+#define WH_U KC_MS_WH_UP
+
+// clang-format off
+/** Convenience macro. */
+#define _KC_LAYOUT_wrapper(                                                                             \
+         k00,      k01,      k02,      k03,      k04,      k05,      k06,      k07,      k08,      k09, \
+         k10,      k11,      k12,      k13,      k14,      k15,      k16,      k17,      k18,      k19, \
+         k20,      k21,      k22,      k23,      k24,      k25,      k26,      k27,      k28,      k29, \
+         ...)                                                                                           \
+    KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, \
+    KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, \
+    KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, \
+    __VA_ARGS__
+#define KC_LAYOUT_wrapper(...) _KC_LAYOUT_wrapper(__VA_ARGS__)
+
+/** Base layer with BÉPO layout. */
+#define LAYOUT_LAYER_BASE_BEPO KC_LAYOUT_wrapper(               \
+       B,    W,    P,    O, QUOT,  DOT,    V,    D,    L,    J, \
+       A,    U,    I,    E, COMM,    C,    T,    S,    R,    N, \
+       Z,    Y,    X, SLSH,    K,    M,    Q,    G,    H,    F, \
+          KC_A, SPC_MBO, TAB_MED, ESC_SYM, SPC_NUM, KC_A)
+
+/** Convenience key shorthands. */
+#define U_NA KC_NO // Present but not available for use.
+#define U_NU KC_NO // Available but not used.
+
+/** Convenience row shorthands. */
+#define ________________HOME_ROW_NA________________    U_NA,    U_NA,    U_NA,    U_NA,    U_NA
+#define ______________HOME_ROW_GASC_L______________ KC_LGUI, KC_LALT, KC_LSFT, KC_LCTL,    U_NA
+#define ______________HOME_ROW_ALGR_L______________    U_NA, KC_ALGR,    U_NA,    U_NA,    U_NA
+#define ______________HOME_ROW_GASC_R______________    U_NA, KC_LCTL, KC_LSFT, KC_LALT, KC_LGUI
+#define ______________HOME_ROW_ALGR_R______________    U_NA,    U_NA,    U_NA, KC_ALGR,    U_NA
+
+/** Layers. */
+
+// Buttons.
+#define LAYOUT_LAYER_MBO                                                                      \
+    ________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
+    ______________HOME_ROW_GASC_L______________, KC_BSPC, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT, \
+    KC_BTN3, KC_ALGR, KC_BTN2, KC_BTN1,    U_NA,  KC_DEL, KC_HOME, KC_PGDN, KC_PGUP,  KC_END, \
+                         U_NA,    U_NA,    U_NA,  KC_ENT,  KC_ENT,  KC_ENT
+
+// Media.
+#define LAYOUT_LAYER_MEDIA                                                                    \
+    ________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
+    ______________HOME_ROW_GASC_L______________,    U_NU,    MS_L,    MS_D,    MS_U,    MS_R, \
+    ______________HOME_ROW_ALGR_L______________,    U_NU,    WH_L,    WH_D,    WH_U,    WH_R, \
+                        U_NA,     U_NA,    U_NA, KC_BTN1, KC_BTN3, KC_BTN2
+
+// Navigation.
+#define LAYOUT_LAYER_NAV                                                                      \
+    ________________HOME_ROW_NA________________, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, \
+    ______________HOME_ROW_GASC_L______________,    U_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, \
+    ______________HOME_ROW_ALGR_L______________,    U_NU,    U_NU,    U_NU,    U_NU,    U_NU, \
+                        U_NA,     U_NA,    U_NA, KC_MSTP, KC_MPLY,    U_NA
+
+// Mouse.
+#define LAYOUT_LAYER_MOUSE                                                                    \
+    S_D_MOD, USR_PST, USR_CPY, USR_CUT, USR_UND, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
+    DPI_MOD, DRGSCRL, KC_LSFT, DRGSCRL, _______,    U_NU,    MS_L,    MS_D,    MS_U,    MS_R, \
+    USR_RDO, USR_PST, USR_CPY, KC_BTN3, USR_UND,    U_NU,    WH_L,    WH_D,    WH_U,    WH_R, \
+                      KC_BTN3, KC_BTN1, KC_BTN2, KC_BTN1, KC_BTN3, KC_BTN2
+
+// Symbols.
+#define LAYOUT_LAYER_SYM                                                                      \
+    KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, ________________HOME_ROW_NA________________, \
+    KC_COLN,  KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GASC_R______________, \
+    KC_TILD, KC_EXLM,   KC_AT, KC_HASH, KC_MINS, ______________HOME_ROW_ALGR_R______________, \
+                         U_NA, KC_RPRN, KC_LPRN,    U_NA,    U_NA,    U_NA
+
+// Numerals.
+#define LAYOUT_LAYER_NUM                                                                      \
+    KC_LBRC,    KC_7,    KC_8,    KC_9, KC_RBRC, ________________HOME_ROW_NA________________, \
+    KC_SCLN,    KC_4,    KC_5,    KC_6,  KC_EQL, ______________HOME_ROW_GASC_R______________, \
+     KC_GRV,    KC_1,    KC_2,    KC_3, KC_UNDS, ______________HOME_ROW_ALGR_R______________, \
+                         U_NA,    KC_0, KC_MINS,    U_NA,    U_NA,    U_NA
+
+// Function keys.
+#define LAYOUT_LAYER_FUN                                                                      \
+     KC_F12,   KC_F7,   KC_F8,   KC_F9, KC_PSCR, ________________HOME_ROW_NA________________, \
+     KC_F11,   KC_F4,   KC_F5,   KC_F6, KC_SLCK, ______________HOME_ROW_GASC_R______________, \
+     KC_F10,   KC_F1,   KC_F2,   KC_F3, KC_PAUS, ______________HOME_ROW_ALGR_R______________,\
+                         U_NA,  KC_APP,  KC_TAB,    U_NA,    U_NA,    U_NA
+
+/**
+ * Add Home Row mod to a layout.
+ *
+ * Expects a 10-key per row layout.  Adds support for GASC (Gui, Alt, Shift, Ctl)
+ * home row.  The layout passed in parameter must contain at least 20 keycodes.
+ *
+ * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
+ *
+ *     HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO)
+ */
+#define _HOME_ROW_MOD_GASC(                                            \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,                  \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,                  \
+    ...)                                                               \
+             L00,         L01,         L02,         L03,         L04,  \
+             R05,         R06,         R07,         R08,         R09,  \
+      LGUI_T(L10), LALT_T(L11), LSFT_T(L12), LCTL_T(L13),        L14,  \
+             R15,  RCTL_T(R16), RSFT_T(R17), LALT_T(R18), RGUI_T(R19), \
+      __VA_ARGS__
+#define HOME_ROW_MOD_GASC(...) _HOME_ROW_MOD_GASC(__VA_ARGS__)
+
+/**
+ * Add mouse layer keys to a layout.
+ *
+ * Expects a 10-key per row layout.  The layout passed in parameter must contain
+ * at least 30 keycodes.
+ *
+ * This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
+ *
+ *     MOUSE_MOD(LAYOUT_LAYER_BASE_BEPO)
+ */
+#define _MOUSE_MOD(                                               \
+    L00, L01, L02, L03, L04, R05, R06, R07, R08, R09,             \
+    L10, L11, L12, L13, L14, R15, R16, R17, R18, R19,             \
+    L20, L21, L22, L23, L24, R25, R26, R27, R28, R29,             \
+    ...)                                                          \
+            L00,        L01,        L02,        L03,        L04,  \
+            R05,        R06,        R07,        R08,        R09,  \
+            L10,        L11,        L12,        L13,        L14,  \
+            R15,        R16,        R17,        R18,        R19,  \
+            L20, MOUSE(L21),        L22,        L23,        L24,  \
+            R25,        R26,        R27,        R28,  MOUSE(R29), \
+      __VA_ARGS__
+#define MOUSE_MOD(...) _MOUSE_MOD(__VA_ARGS__)
+
+#define LAYOUT_wrapper(...) LAYOUT_split_3x5_3(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [LAYER_BASE] = LAYOUT_wrapper(
+    MOUSE_MOD(HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO))
+  ),
+  [LAYER_MBO] = LAYOUT_wrapper(LAYOUT_LAYER_MBO),
+  [LAYER_MEDIA] = LAYOUT_wrapper(LAYOUT_LAYER_MEDIA),
+  [LAYER_NAV] = LAYOUT_wrapper(LAYOUT_LAYER_NAV),
+  [LAYER_MOUSE] = LAYOUT_wrapper(LAYOUT_LAYER_MOUSE),
+  [LAYER_SYM] = LAYOUT_wrapper(LAYOUT_LAYER_SYM),
+  [LAYER_NUM] = LAYOUT_wrapper(LAYOUT_LAYER_NUM),
+  [LAYER_FUN] = LAYOUT_wrapper(LAYOUT_LAYER_FUN),
+};
+// clang-format on
+
+#if defined(POINTING_DEVICE_ENABLE) && defined(DILEMMA_AUTO_SNIPING_ON_LAYER)
+layer_state_t layer_state_set_user(layer_state_t state) {
+    dilemma_set_pointer_sniping_enabled(layer_state_cmp(state, DILEMMA_AUTO_SNIPING_ON_LAYER));
+    return state;
+}
+#endif // POINTING_DEVICE_ENABLE && DILEMMA_AUTO_SNIPING_ON_LAYER
+
+#ifdef RGB_MATRIX_ENABLE
+// Forward-declare this helper function since it is defined in rgb_matrix.c.
+void rgb_matrix_update_pwm_buffers(void);
+#endif
+
+void shutdown_user(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_enable_noeeprom();
+    rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
+    rgblight_setrgb_red();
+#endif // RGBLIGHT_ENABLE
+#ifdef RGB_MATRIX_ENABLE
+    rgb_matrix_set_color_all(RGB_RED);
+    rgb_matrix_update_pwm_buffers();
+#endif // RGB_MATRIX_ENABLE
+}

keyboards/bastardkb/dilemma/3x5_3/keymaps/bstiq/readme.md

@@ -0,0 +1,3 @@
+# Dilemma @bstiq keymap
+
+Inspired from Miryoku, using home-rows.

keyboards/bastardkb/dilemma/3x5_3/keymaps/default/keymap.c

@@ -0,0 +1,84 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum dilemma_keymap_layers {
+    LAYER_BASE = 0,
+    LAYER_NAV,
+    LAYER_SYM,
+    LAYER_NUM,
+};
+
+#define NAV MO(LAYER_NAV)
+#define SYM MO(LAYER_SYM)
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [LAYER_BASE] = LAYOUT_split_3x5_3(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+          KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,       KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,       KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,       KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                            KC_A,     NAV, CAPSWRD,     KC_SPC,     SYM,    KC_A
+  //                   ╰───────────────────────────╯ ╰──────────────────────────╯
+  ),
+
+  [LAYER_NAV] = LAYOUT_split_3x5_3(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+        KC_TAB, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,    XXXXXXX, KC_HOME,   KC_UP,  KC_END,  KC_DEL,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_LSFT, KC_LCTL, KC_LALT, KC_RGUI, KC_VOLD,    XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       QK_BOOT, EEP_RST, KC_MPRV, KC_MNXT, KC_MPLY,    XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX,  KC_ENT,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                            KC_A, _______, KC_LSFT,     KC_SPC, _______,    KC_A
+  //                   ╰───────────────────────────╯ ╰──────────────────────────╯
+  ),
+
+  [LAYER_SYM] = LAYOUT_split_3x5_3(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+        KC_ESC, KC_LBRC, KC_LCBR, KC_LPRN, KC_TILD,    KC_CIRC, KC_RPRN, KC_RCBR, KC_RBRC,  KC_GRV,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_MINS, KC_ASTR,  KC_EQL, KC_UNDS,  KC_DLR,    KC_HASH, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_PLUS, KC_PIPE,   KC_AT, KC_SLSH, KC_PERC,    _______, KC_BSLS, KC_AMPR, KC_QUES, KC_EXLM,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                            KC_A, _______, KC_LSFT,     KC_SPC, _______,    KC_A
+  //                   ╰───────────────────────────╯ ╰──────────────────────────╯
+  ),
+
+  [LAYER_NUM] = LAYOUT_split_3x5_3(
+  // ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
+          KC_1,    KC_2,    KC_3,    KC_4,    KC_5,       KC_6,    KC_7,    KC_8,    KC_9,   KC_0,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+       KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,  KC_F11,     KC_F12, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT,
+  // ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
+         KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,      KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,
+  // ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
+                            KC_A, _______, KC_LSFT,     KC_SPC, _______,    KC_A
+  //                   ╰───────────────────────────╯ ╰──────────────────────────╯
+  ),
+};
+// clang-format on
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, LAYER_NAV, LAYER_SYM, LAYER_NUM);
+}

keyboards/bastardkb/dilemma/3x5_3/mcuconf.h

@@ -0,0 +1,26 @@
+/**
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef RP_SPI_USE_SPI1
+#define RP_SPI_USE_SPI1 TRUE
+
+#undef RP_I2C_USE_I2C1
+#define RP_I2C_USE_I2C1 TRUE

keyboards/bastardkb/dilemma/3x5_3/readme.md

@@ -0,0 +1,5 @@
+# Next generation Dilemma keyboard
+
+This keyboard is an updated version of the [3x5+2 Dilemma](../3x5_2/).
+
+This is still under active development, and not available publicly yet.

keyboards/bastardkb/dilemma/3x5_3/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = no     # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor
+
+POINTING_DEVICE_ENABLE = yes
+POINTING_DEVICE_DRIVER = cirque_pinnacle_spi
+
+SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x5_3
+
+# RP2040-specific options
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.

keyboards/bastardkb/dilemma/config.h

@@ -47,3 +47,4 @@
 // Configure for the Cirque model used on the Dilemma.
 #define CIRQUE_PINNACLE_DIAMETER_MM 35
 #define CIRQUE_PINNACLE_CURVED_OVERLAY
+#define POINTING_DEVICE_GESTURES_SCROLL_ENABLE // Circular scroll.

keyboards/bastardkb/dilemma/dilemma.c

@@ -1,4 +1,4 @@
-/*
+/**
  * Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
  * Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
  * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
@@ -316,7 +316,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
 
 void eeconfig_init_kb(void) {
     g_dilemma_config.raw                 = 0;
-    g_dilemma_config.pointer_default_dpi = 4;
+    g_dilemma_config.pointer_default_dpi = 3; // DPI=1000
     write_dilemma_config_to_eeprom(&g_dilemma_config);
     maybe_update_pointing_device_cpi(&g_dilemma_config);
     eeconfig_init_user();
@@ -327,3 +327,17 @@ void matrix_init_kb(void) {
     matrix_init_user();
 }
 #endif // POINTING_DEVICE_ENABLE
+
+// Forward declare RP2040 SDK declaration.
+void gpio_init(uint gpio);
+
+void keyboard_pre_init_user(void) {
+    // Ensures that GP26 through GP29 are initialized as digital inputs (as
+    // opposed to analog inputs).  These GPIOs are shared with A0 through A3,
+    // respectively.  On RP2040-B2 and later, the digital inputs are disabled by
+    // default (see RP2040-E6).
+    gpio_init(GP26);
+    gpio_init(GP27);
+    gpio_init(GP28);
+    gpio_init(GP29);
+}

keyboards/bastardkb/dilemma/dilemma.h

@@ -17,27 +17,18 @@
 
 #pragma once
 
-#include "quantum.h"
-
 // clang-format off
-#define LAYOUT_split_3x5_2(                             \
-  k00, k01, k02, k03, k04,     k44, k43, k42, k41, k40, \
-  k10, k11, k12, k13, k14,     k54, k53, k52, k51, k50, \
-  k20, k21, k22, k23, k24,     k64, k63, k62, k61, k60, \
-                 k30, k32,     k72, k70                 \
-)                                                       \
-{                                                       \
-  {   k00,   k01,   k02,   k03,   k04 },                \
-  {   k10,   k11,   k12,   k13,   k14 },                \
-  {   k20,   k21,   k22,   k23,   k24 },                \
-  {   k30, KC_NO,   k32, KC_NO, KC_NO },                \
-  {   k40,   k41,   k42,   k43,   k44 },                \
-  {   k50,   k51,   k52,   k53,   k54 },                \
-  {   k60,   k61,   k62,   k63,   k64 },                \
-  {   k70, KC_NO,   k72, KC_NO, KC_NO },                \
-}
+#if defined(KEYBOARD_bastardkb_dilemma_3x5_2_splinky) || defined (KEYBOARD_bastardkb_dilemma_3x5_2_assembled)
+#    include "3x5_2.h"
+#elif defined(KEYBOARD_bastardkb_dilemma_3x5_3)
+#    include "3x5_3.h"
+#else
+#    error "Unsuported format"
+#endif
 // clang-format on
 
+#include "quantum.h"
+
 #ifdef POINTING_DEVICE_ENABLE
 #    ifndef NO_DILEMMA_KEYCODES
 enum dilemma_keycodes {

keyboards/bastardkb/dilemma/elitec/info.json

@@ -1,6 +0,0 @@
-{
-    "keyboard_name": "Dilemma Elite-C",
-    "usb": {
-      "device_version": "1.0.0",
-    },
-}

keyboards/bastardkb/dilemma/elitec/rules.mk

@@ -1,5 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu

keyboards/bastardkb/dilemma/info.json

@@ -1,46 +1,3 @@
 {
     "url": "https://bastardkb.com/dilemma",
-    "usb": {
-        "pid": "0x1835",
-    },
-    "layouts": {
-        "LAYOUT_split_3x5_2": {
-            "layout": [
-                {"label":"L00", "x":0, "y":0},
-                {"label":"L01", "x":1, "y":0},
-                {"label":"L02", "x":2, "y":0},
-                {"label":"L03", "x":3, "y":0},
-                {"label":"L04", "x":4, "y":0},
-                {"label":"R00", "x":11, "y":0},
-                {"label":"R01", "x":12, "y":0},
-                {"label":"R02", "x":13, "y":0},
-                {"label":"R03", "x":14, "y":0},
-                {"label":"R04", "x":15, "y":0},
-                {"label":"L10", "x":0, "y":1},
-                {"label":"L11", "x":1, "y":1},
-                {"label":"L12", "x":2, "y":1},
-                {"label":"L13", "x":3, "y":1},
-                {"label":"L14", "x":4, "y":1},
-                {"label":"R10", "x":11, "y":1},
-                {"label":"R11", "x":12, "y":1},
-                {"label":"R12", "x":13, "y":1},
-                {"label":"R13", "x":14, "y":1},
-                {"label":"R14", "x":15, "y":1},
-                {"label":"L20", "x":0, "y":2},
-                {"label":"L21", "x":1, "y":2},
-                {"label":"L22", "x":2, "y":2},
-                {"label":"L23", "x":3, "y":2},
-                {"label":"L24", "x":4, "y":2},
-                {"label":"R20", "x":11, "y":2},
-                {"label":"R21", "x":12, "y":2},
-                {"label":"R22", "x":13, "y":2},
-                {"label":"R23", "x":14, "y":2},
-                {"label":"R24", "x":15, "y":2},
-                {"label":"L30", "x":4, "y":3},
-                {"label":"L32", "x":5, "y":3},
-                {"label":"R32", "x":10, "y":3},
-                {"label":"R30", "x":11, "y":3}
-            ]
-        }
-    }
 }

keyboards/bastardkb/dilemma/readme.md

@@ -3,12 +3,14 @@
 A very small keyboard made for ergonomic enthusiasts.
 
 -   Keyboard Maintainer: [Bastard Keyboards](https://github.com/Bastardkb/)
--   Hardware Supported: elite-C V4, Splinky
+-   Hardware Supported: RP2040-based controller (_eg._ Splinky, Elite-c, ...)
 -   Hardware Availability: [Bastardkb.com](https://bastardkb.com/)
 
+A pre-assembled version (with embedded controller) is also available.
+
 Make example for this keyboard (after setting up your build environment):
 
-    make bastardkb/dilemma/elitec:default
-    make bastardkb/dilemma/splinky:default
+    make bastardkb/dilemma/3x5_2/splinky:default
+    make bastardkb/dilemma/3x5_2/assembled:default
 
 See the [keyboard build instructions](http://docs.bastardkb.com/)

keyboards/bastardkb/dilemma/splinky/info.json

@@ -1,6 +0,0 @@
-{
-    "keyboard_name": "Dilemma Splinky",
-    "usb": {
-      "device_version": "1.0.0",
-    },
-}

keyboards/bastardkb/dilemma/splinky/rules.mk

@@ -1,9 +0,0 @@
-# MCU name
-MCU = RP2040
-
-# Bootloader selection
-BOOTLOADER = rp2040
-
-# RP2040-specific options
-PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
-SERIAL_DRIVER = vendor

keyboards/bastardkb/scylla/blackpill/halconf.h

@@ -1,4 +1,4 @@
-/*
+/**
  * Copyright 2020 Nick Brassel (tzarc)
  * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
  *
@@ -20,10 +20,8 @@
 
 #define HAL_USE_PWM TRUE
 #define HAL_USE_SERIAL TRUE
-//#define HAL_USE_I2C     TRUE
 #define HAL_USE_SPI TRUE
 #define SPI_USE_WAIT TRUE
 #define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
-#define HAL_USE_GPT TRUE
 
 #include_next <halconf.h>

keyboards/bastardkb/scylla/blackpill/mcuconf.h

@@ -21,39 +21,15 @@
 
 #include_next <mcuconf.h>
 
-#undef STM32_I2C_USE_I2C1
-#define STM32_I2C_USE_I2C1 FALSE
-
-//#undef STM32_I2C_I2C1_RX_DMA_STREAM
-//#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
-//#undef STM32_I2C_I2C1_TX_DMA_STREAM
-//#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
-
-#undef STM32_PWM_USE_TIM2
-#define STM32_PWM_USE_TIM2 TRUE
-
-//#undef STM32_PWM_USE_TIM3
-//#define STM32_PWM_USE_TIM3 TRUE
-
 #undef STM32_SPI_USE_SPI1
 #define STM32_SPI_USE_SPI1 TRUE
 
-//#undef STM32_SPI_SPI1_RX_DMA_STREAM
-//#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
-//#undef STM32_SPI_SPI1_TX_DMA_STREAM
-//#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
 
 #undef STM32_SERIAL_USE_USART1
 #define STM32_SERIAL_USE_USART1 TRUE
 
-//#undef STM32_SERIAL_USE_USART2
-//#define STM32_SERIAL_USE_USART2 TRUE
-
-//#undef STM32_UART_USART2_RX_DMA_STREAM
-//#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
-//#undef STM32_UART_USART2_TX_DMA_STREAM
-//#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
-
 #undef STM32_GPT_USE_TIM3
 #define STM32_GPT_USE_TIM3 TRUE
 

keyboards/bastardkb/scylla/readme.md

@@ -6,17 +6,24 @@ A modern, low-profile split ergonomic keyboard
 * Hardware Supported: elite-C V4
 * Hardware Availability: [Bastard Keyboards](https://bastardkb.com/)
 
-Make example for this keyboard (after setting up your build environment):
+## Building the firmware
 
-    make bastardkb/scylla:default
+**You must specify the shield version when compiling/flashing the firmware.**
 
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-See the [keyboard build instructions](https://docs.bastardkb.com)
+The template is:
 
+```shell
+qmk compile -kb bastardkb/scylla/{VERSION}/elitec -km {KEYMAP}
+```
 
-## Important information regarding the reset
+| Shield Version  | default                                                       | via                                                       |
+| --------------- | ------------------------------------------------------------- | --------------------------------------------------------- |
+| v1 (Elite-C)    | `qmk compile -kb bastardkb/scylla/v1/elitec -km default`      | `qmk compile -kb bastardkb/scylla/v1/elitec -km via`      |
+| v2 (Elite-C)    | `qmk compile -kb bastardkb/scylla/v2/elitec -km default`      | `qmk compile -kb bastardkb/scylla/v2/elitec -km via`      |
+| v2 (Splinky v2) | `qmk compile -kb bastardkb/scylla/v2/splinky/v2 -km default`  | `qmk compile -kb bastardkb/scylla/v2/splinky/v2 -km via`  |
+| v2 (Splinky v3) | `qmk compile -kb bastardkb/scylla/v2/splinky/v3 -km default`  | `qmk compile -kb bastardkb/scylla/v2/splinky/v3 -km via`  |
+| v2 (STeMCell)   | `qmk compile -kb bastardkb/scylla/v2/stemcell -km default`    | `qmk compile -kb bastardkb/scylla/v2/stemcell -km via`    |
 
-If you modify this firmware, make sure to always have a `QK_BOOT` key that can be triggered using only the master side ! This way you ensure that you can always flash the keyboard, even if you mess up.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
-Otherwise if you're stuck, open the case and reset manually by shorting Gnd and Rst, or pressing the RST button.
+See the [keyboard build instructions](https://docs.bastardkb.com)