Co-authored-by: precondition <57645186+precondition@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/13623/head
@ -0,0 +1,131 @@ | |||
/* | |||
Copyright 2021 StefanGrindelwald | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER StefanGrindelwald | |||
#define PRODUCT Momoka Ergo | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 14 | |||
#define MATRIX_COLS 6 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7 } | |||
#define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
#define SELECT_SOFT_SERIAL_SPEED 5 | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6 | |||
#define RGB_DI_PIN C7 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 22 | |||
#define RGBLED_SPLIT { 11, 11 } | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 3 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 | |||
#define BOOTMAGIC_KEY_SALT KC_RSFT||KC_LSFT | |||
#define BOOTMAGIC_KEY_SKIP KC_ESC | |||
#define BOOTMAGIC_KEY_EEPROM_CLEAR KC_NO | |||
#define OOTMAGIC_KEY_BOOTLOADER KC_RCTL||KC_LCTL | |||
#define BOOTMAGIC_KEY_EE_HANDS_LEFT KC_T | |||
#define BOOTMAGIC_KEY_EE_HANDS_RIGHT KC_Y | |||
#define USE_SERIAL | |||
#define SPLIT_USB_DETECT | |||
#define EE_HANDS |
@ -0,0 +1,82 @@ | |||
{ | |||
"keyboard_name": "MOMOKA_ERGO", | |||
"url": "", | |||
"maintainer": "StefanGrindelwald", | |||
"width": 19.5, | |||
"height": 9.375, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"label":"L02", "x":3.5, "y":0}, | |||
{"label":"R03", "x":15, "y":0}, | |||
{"label":"L03", "x":2.5, "y":0.125}, | |||
{"label":"L01", "x":4.5, "y":0.125}, | |||
{"label":"R04", "x":14, "y":0.125}, | |||
{"label":"R02", "x":16, "y":0.125}, | |||
{"label":"L00", "x":5.5, "y":0.25}, | |||
{"label":"R05", "x":13, "y":0.25}, | |||
{"label":"L05", "x":0, "y":0.375, "w":1.5}, | |||
{"label":"L04", "x":1.5, "y":0.375}, | |||
{"label":"R01", "x":17, "y":0.375}, | |||
{"label":"R00", "x":18, "y":0.375, "w":1.5}, | |||
{"label":"L12", "x":3.5, "y":1}, | |||
{"label":"R13", "x":15, "y":1}, | |||
{"label":"L13", "x":2.5, "y":1.125}, | |||
{"label":"L11", "x":4.5, "y":1.125}, | |||
{"label":"R14", "x":14, "y":1.125}, | |||
{"label":"R12", "x":16, "y":1.125}, | |||
{"label":"L10", "x":5.5, "y":1.25}, | |||
{"label":"R15", "x":13, "y":1.25}, | |||
{"label":"L15", "x":0, "y":1.375, "w":1.5}, | |||
{"label":"L14", "x":1.5, "y":1.375}, | |||
{"label":"R11", "x":17, "y":1.375}, | |||
{"label":"R10", "x":18, "y":1.375, "w":1.5}, | |||
{"label":"L22", "x":3.5, "y":2}, | |||
{"label":"R23", "x":15, "y":2}, | |||
{"label":"L23", "x":2.5, "y":2.125}, | |||
{"label":"L21", "x":4.5, "y":2.125}, | |||
{"label":"R24", "x":14, "y":2.125}, | |||
{"label":"R22", "x":16, "y":2.125}, | |||
{"label":"L20", "x":5.5, "y":2.25}, | |||
{"label":"R25", "x":13, "y":2.25}, | |||
{"label":"L25", "x":0, "y":2.375, "w":1.5}, | |||
{"label":"L24", "x":1.5, "y":2.375}, | |||
{"label":"R21", "x":17, "y":2.375}, | |||
{"label":"R20", "x":18, "y":2.375, "w":1.5}, | |||
{"label":"L32", "x":3.5, "y":3}, | |||
{"label":"R33", "x":15, "y":3}, | |||
{"label":"L33", "x":2.5, "y":3.125}, | |||
{"label":"L31", "x":4.5, "y":3.125}, | |||
{"label":"R34", "x":14, "y":3.125}, | |||
{"label":"R32", "x":16, "y":3.125}, | |||
{"label":"L30", "x":5.5, "y":3.25}, | |||
{"label":"R35", "x":13, "y":3.25}, | |||
{"label":"L35", "x":0, "y":3.375, "w":1.5}, | |||
{"label":"L34", "x":1.5, "y":3.375}, | |||
{"label":"R31", "x":17, "y":3.375}, | |||
{"label":"R30", "x":18, "y":3.375, "w":1.5}, | |||
{"label":"L42", "x":3.5, "y":4}, | |||
{"label":"R43", "x":15, "y":4}, | |||
{"label":"L43", "x":2.5, "y":4.125}, | |||
{"label":"L41", "x":4.5, "y":4.125}, | |||
{"label":"R44", "x":14, "y":4.125}, | |||
{"label":"R42", "x":16, "y":4.125}, | |||
{"label":"L45", "x":0.5, "y":4.375}, | |||
{"label":"L44", "x":1.5, "y":4.375}, | |||
{"label":"R41", "x":17, "y":4.375}, | |||
{"label":"R40", "x":18, "y":4.375}, | |||
{"label":"L51", "x":1, "y":4.375}, | |||
{"label":"L40", "x":2, "y":4.375}, | |||
{"label":"L52", "x":0, "y":5.375, "h":2}, | |||
{"label":"L61", "x":1, "y":5.375, "h":2}, | |||
{"label":"L50", "x":2, "y":5.375}, | |||
{"label":"L60", "x":2, "y":6.375}, | |||
{"label":"R45", "x":-3.0, "y":6.375}, | |||
{"label":"R54", "x":-2, "y":6.375}, | |||
{"label":"R55", "x":-3.0, "y":7.375}, | |||
{"label":"R64", "x":-2, "y":7.375, "h":2}, | |||
{"label":"R53", "x":-1.0, "y":7.375, "h":2}, | |||
{"label":"R65", "x":-3.0, "y":8.375}] | |||
} | |||
} | |||
} |
@ -0,0 +1,55 @@ | |||
/* Copyright 2021 StefanGrindelwald | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_FN1, | |||
_FN2 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||
MO(_FN1), KC_GRV, KC_EQL, KC_LEFT, KC_RGHT, KC_LALT, KC_RGUI, KC_UP, KC_DOWN, KC_LBRC, KC_RBRC, MO(_FN1), | |||
KC_BSPC, KC_LCTL, KC_HOME, KC_PGUP, KC_RCTL, KC_SPC, | |||
KC_DEL, KC_END, KC_PGDN, KC_ENT | |||
), | |||
[_FN1] = LAYOUT( | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
MO(_FN2), _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_MOD, RGB_TOG, MO(_FN2), | |||
_______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, RGB_VAI, RGB_VAD, RGB_SAI, RGB_SAD, _______, | |||
_______, _______, _______, RGB_HUI, _______, _______, | |||
_______, _______, RGB_HUD, _______ | |||
), | |||
[_FN2] = LAYOUT( | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, RESET, _______, _______, _______, _______, RESET, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_MOD, RGB_TOG, _______, | |||
_______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, RGB_VAI, RGB_VAD, RGB_SAI, RGB_SAD, _______, | |||
_______, _______, _______, RGB_HUI, _______, _______, | |||
_______, _______, RGB_HUD, _______ | |||
) | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for momoka_ergo |
@ -0,0 +1,17 @@ | |||
/* Copyright 2021 StefanGrindelwald | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "momoka_ergo.h" |
@ -0,0 +1,53 @@ | |||
/* Copyright 2021 StefanGrindelwald | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
L05, L04, L03, L02, L01, L00, R05, R04, R03, R02, R01, R00, \ | |||
L15, L14, L13, L12, L11, L10, R15, R14, R13, R12, R11, R10, \ | |||
L25, L24, L23, L22, L21, L20, R25, R24, R23, R22, R21, R20, \ | |||
L35, L34, L33, L32, L31, L30, R35, R34, R33, R32, R31, R30, \ | |||
L45, L44, L43, L42, L41, L40, R45, R44, R43, R42, R41, R40, \ | |||
L52, L51, L50, R55, R54, R53, \ | |||
L61, L60, R65, R64 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 },\ | |||
{ L50, L51, L52, KC_NO,KC_NO,KC_NO },\ | |||
{ L60, L61,KC_NO,KC_NO,KC_NO,KC_NO },\ | |||
{ R05, R04, R03, R02, R01, R00 }, \ | |||
{ R15, R14, R13, R12, R11, R10 }, \ | |||
{ R25, R24, R23, R22, R21, R20 }, \ | |||
{ R35, R34, R33, R32, R31, R30 }, \ | |||
{ R45, R44, R43, R42, R41, R40 },\ | |||
{ R55, R54, R53, KC_NO, KC_NO, KC_NO }, \ | |||
{ R65, R64, KC_NO, KC_NO, KC_NO, KC_NO } \ | |||
} |
@ -0,0 +1,29 @@ | |||
# momoka_ergo | |||
![momoka_ergo](https://github.com/StefanGrindelwald/TestDemo/blob/master/Momoka_ergo.jpg?raw=true) | |||
The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable. | |||
* Keyboard Maintainer: [StefanGrindelwald](https://github.com/StefanGrindelwald) | |||
* Hardware Supported: momoka.co/ergo | |||
* Hardware Availability: momoka.co/ergo | |||
Bootloader: | |||
With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB. | |||
Make example for this keyboard (after setting up your build environment): | |||
make momoka_ergo:default | |||
Flashing example for this keyboard(Note that you need flash the both side keyboard respectively): | |||
For the left side: | |||
make momoka_ergo:default:dfu-split-left | |||
For the right side: | |||
make momoka_ergo:default:dfu-split-right | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |