updating per request and completing readme

keyboards/adalyn/info.json

@@ -2,8 +2,6 @@
   "keyboard_name": "adalyn",
   "url": "https://github.com/MarvFPV/Adalyn",
   "maintainer": "tominabox1",
-  "width": 10.25,
-  "height": 4,
   "layouts": {
     "LAYOUT": {
         "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0, "w":1.25}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"x":10.75, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2, "w":1.5}, {"x":0, "y":3}, {"x":2.5, "y":3}, {"x":3.5, "y":3, "w":2.25}, {"x":6.25, "y":3, "w":2}, {"x":8.25, "y":3}, {"x":10.75, "y":3}]

keyboards/adalyn/readme.md

@@ -1,3 +1,19 @@
 # Adalyn
 
-Todo
+![Adalyn](https://i.imgur.com/3mGQlh2.jpg)
+
+*A cool QAZ-Alice hybrid designed by [Marv](https://github.com/MarvFPV/Adalyn) with a PCB by [tominabox1](https://github.com/tominabox1)*
+* Keyboard Maintainer: [tominabox1](https://github.com/tominabox1)
+* Hardware Supported: Adalyn PCB, atmega32u4
+* Hardware Availability: Open source on @tominabox1 GitHub
+
+Make example for this keyboard (after setting up your build environment):
+    make adalyn:default
+Flashing example for this keyboard:
+    make adalyn:default:flash
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+## Bootloader
+Enter the bootloader in 3 ways:
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/adalyn/rules.mk

@@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes     # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug