@ -1,23 +1 @@ | |||
#include "4x5.h" | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
@ -1,20 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |
@ -1,14 +1 @@ | |||
#include "4x6.h" | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
matrix_init_user(); | |||
}; | |||
@ -1,36 +1,27 @@ | |||
#pragma once | |||
#include "dactyl_manuform.h" | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
#define XXX KC_NO | |||
#define LAYOUT(\ | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L32, L33, R32, R33, \ | |||
L34, L35, R30, R31, \ | |||
L44, L45, R40, R41, \ | |||
L42, L43, R42, R43 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ KC_NO, KC_NO, L32, L33, L34, L35 }, \ | |||
{ KC_NO, KC_NO, L42, L43, L44, L45 }, \ | |||
L32, L33, R32, R33, \ | |||
L34, L35, R30, R31, \ | |||
L44, L45, R40, R41, \ | |||
L42, L43, R42, R43 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ XXX, XXX, L32, L33, L34, L35 }, \ | |||
{ XXX, XXX, L42, L43, L44, L45 }, \ | |||
\ | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, KC_NO, KC_NO }, \ | |||
{ R40, R41, R42, R43, KC_NO, KC_NO } \ | |||
\ | |||
} | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, XXX, XXX }, \ | |||
{ R40, R41, R42, R43, XXX, XXX } \ | |||
} |
@ -1,20 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |
@ -1,23 +1 @@ | |||
#include "5x6.h" | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
@ -1,38 +1,30 @@ | |||
#pragma once | |||
#include "dactyl_manuform.h" | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
#define XXX KC_NO | |||
#define LAYOUT_5x6(\ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L42, L43, R42, R43, \ | |||
L44, L45, R40, R41, \ | |||
L54, L55, R50, R51, \ | |||
L52, L53, R52, R53 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ KC_NO, KC_NO, L42, L43, L44, L45 }, \ | |||
{ KC_NO, KC_NO, L52, L53, L54, L55 }, \ | |||
\ | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, R34, R35 }, \ | |||
{ R40, R41, R42, R43, KC_NO, KC_NO }, \ | |||
{ R50, R51, R52, R53, KC_NO, KC_NO } \ | |||
#define LAYOUT_5x6( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L42, L43, R42, R43, \ | |||
L44, L45, R40, R41, \ | |||
L54, L55, R50, R51, \ | |||
L52, L53, R52, R53 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ XXX, XXX, L42, L43, L44, L45 }, \ | |||
{ XXX, XXX, L52, L53, L54, L55 }, \ | |||
\ | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, R34, R35 }, \ | |||
{ R40, R41, R42, R43, XXX, XXX }, \ | |||
{ R50, R51, R52, R53, XXX, XXX } \ | |||
} |
@ -1,20 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |
@ -1,14 +1,23 @@ | |||
BOOTMAGIC_ENABLE = lite | |||
COMMAND_ENABLE = no | |||
# MCU name | |||
MCU = atmega32u4 | |||
# # Pro-Micro | |||
# NKRO_ENABLE = yes | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# # # Adafruit Feather | |||
# # NKRO_ENABLE = no | |||
# # # Processor frequency | |||
# F_CPU = 8000000 | |||
# F_USB = $(F_CPU) | |||
# # # BLUETOOTH_ENABLE = no | |||
# # BLUETOOTH = AdafruitBLE | |||
# # CONSOLE_DEBUG = yes | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |
@ -1,2 +1 @@ | |||
#include "5x6_5.h" | |||
@ -1,3 +1,23 @@ | |||
BOOTMAGIC_ENABLE = lite | |||
COMMAND_ENABLE = no | |||
NKRO_ENABLE = yes | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |
@ -1,23 +1 @@ | |||
#include "5x7.h" | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
@ -1,20 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |
@ -1,23 +1 @@ | |||
#include "6x6.h" | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
@ -1,42 +1,33 @@ | |||
#pragma once | |||
#include "dactyl_manuform.h" | |||
#include "quantum.h" | |||
#define XXX KC_NO | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
#define LAYOUT_6x6(\ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45, \ | |||
L52, L53, R52, R53, \ | |||
L54, L55, R50, R51, \ | |||
L64, L65, R60, R61, \ | |||
L62, L63, R62, R63 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 }, \ | |||
{ KC_NO, KC_NO, L52, L53, L54, L55 }, \ | |||
{ KC_NO, KC_NO, L62, L63, L64, L65 }, \ | |||
\ | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, R34, R35 }, \ | |||
{ R40, R41, R42, R43, R44, R45 }, \ | |||
{ R50, R51, R52, R53, KC_NO, KC_NO }, \ | |||
{ R60, R61, R62, R63, KC_NO, KC_NO } \ | |||
#define LAYOUT_6x6( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45, \ | |||
L52, L53, R52, R53, \ | |||
L54, L55, R50, R51, \ | |||
L64, L65, R60, R61, \ | |||
L62, L63, R62, R63 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 }, \ | |||
{ XXX, XXX, L52, L53, L54, L55 }, \ | |||
{ XXX, XXX, L62, L63, L64, L65 }, \ | |||
\ | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, R34, R35 }, \ | |||
{ R40, R41, R42, R43, R44, R45 }, \ | |||
{ R50, R51, R52, R53, XXX, XXX }, \ | |||
{ R60, R61, R62, R63, XXX, XXX } \ | |||
} |
@ -1,20 +1,23 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
SPLIT_KEYBOARD = yes |
@ -1,30 +1,21 @@ | |||
#pragma once | |||
#ifdef KEYBOARD_handwired_dactyl_manuform_4x5 | |||
#include "4x5.h" | |||
#elif KEYBOARD_handwired_dactyl_manuform_4x6 | |||
#include "4x6.h" | |||
#elif KEYBOARD_handwired_dactyl_manuform_5x6 | |||
#include "5x6.h" | |||
#elif KEYBOARD_handwired_dactyl_manuform_5x6_5 | |||
#include "5x6_5.h" | |||
#elif KEYBOARD_handwired_dactyl_manuform_5x6_2_5 | |||
#include "5x6_2_5.h" | |||
#elif KEYBOARD_handwired_dactyl_manuform_5x7 | |||
#include "5x7.h" | |||
#elif KEYBOARD_handwired_dactyl_manuform_6x6 | |||
#include "6x6.h" | |||
#elif KEYBOARD_handwired_dactyl_manuform_dmote_62key | |||
#include "62key.h" | |||
#ifdef defined(KEYBOARD_handwired_dactyl_manuform_4x5) | |||
# include "4x5.h" | |||
#elif defined(KEYBOARD_handwired_dactyl_manuform_4x6) | |||
# include "4x6.h" | |||
#elif defined(KEYBOARD_handwired_dactyl_manuform_5x6) | |||
# include "5x6.h" | |||
#elif defined(KEYBOARD_handwired_dactyl_manuform_5x6_5) | |||
# include "5x6_5.h" | |||
#elif defined(KEYBOARD_handwired_dactyl_manuform_5x6_2_5) | |||
# include "5x6_2_5.h" | |||
#elif defined(KEYBOARD_handwired_dactyl_manuform_5x7) | |||
# include "5x7.h" | |||
#elif defined(KEYBOARD_handwired_dactyl_manuform_6x6) | |||
# include "6x6.h" | |||
#elif defined(KEYBOARD_handwired_dactyl_manuform_dmote_62key) | |||
# include "62key.h" | |||
#endif | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif |
@ -1,5 +1 @@ | |||
#include "62key.h" | |||
void matrix_init_kb(void) { | |||
matrix_init_user(); | |||
}; |
@ -1,34 +0,0 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SPLIT_KEYBOARD = yes |