* feat: add initial ergoslab directory * fix: address all comments from noroadsleft * fix: address comment from drashna * feat: add swap hands config to ergoslab * chore: change ergoslab image to real photo * repull/9718/head
@ -0,0 +1,28 @@ | |||
/* | |||
Copyright 2019 Tom Saleeba <ergoslab@techotom.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
#define MOUSEKEY_INTERVAL 16 | |||
#define MOUSEKEY_DELAY 0 | |||
#define MOUSEKEY_TIME_TO_MAX 40 | |||
#define MOUSEKEY_MAX_SPEED 7 | |||
#define MOUSEKEY_WHEEL_MAX_SPEED 4 | |||
#define MOUSEKEY_WHEEL_TIME_TO_MAX 255 | |||
#define MOUSEKEY_WHEEL_DELAY 0 |
@ -0,0 +1 @@ | |||
#include "ergoslab.h" |
@ -0,0 +1,7 @@ | |||
#pragma once | |||
#ifdef KEYBOARD_ergoslab_rev1 | |||
#include "rev1.h" | |||
#endif | |||
#include "quantum.h" |
@ -0,0 +1,66 @@ | |||
{ | |||
"keyboard_name": "ergoslab", | |||
"url": "https://github.com/tomsaleeba/ergoslab", | |||
"maintainer": "tomsaleeba", | |||
"width": 13, | |||
"height": 5.25, | |||
"layouts": { | |||
"LAYOUT_ergoslab": { | |||
"key_count": 52, | |||
"layout": [ | |||
{"label":"Q", "x":0, "y":0.625}, | |||
{"label":"W", "x":1, "y":0.125}, | |||
{"label":"E", "x":2, "y":0}, | |||
{"label":"R", "x":3, "y":0.125}, | |||
{"label":"T", "x":4, "y":0.25}, | |||
{"label":"Y", "x":8, "y":0.25}, | |||
{"label":"U", "x":9, "y":0.125}, | |||
{"label":"I", "x":10, "y":0}, | |||
{"label":"O", "x":11, "y":0.125}, | |||
{"label":"P", "x":12, "y":0.625}, | |||
{"label":"A", "x":0, "y":1.625}, | |||
{"label":"S", "x":1, "y":1.125}, | |||
{"label":"D", "x":2, "y":1}, | |||
{"label":"F", "x":3, "y":1.125}, | |||
{"label":"G", "x":4, "y":1.25}, | |||
{"label":"H", "x":8, "y":1.25}, | |||
{"label":"J", "x":9, "y":1.125}, | |||
{"label":"K", "x":10, "y":1}, | |||
{"label":"L", "x":11, "y":1.125}, | |||
{"label":";", "x":12, "y":1.625}, | |||
{"label":"Z", "x":0, "y":2.625}, | |||
{"label":"X", "x":1, "y":2.125}, | |||
{"label":"C", "x":2, "y":2}, | |||
{"label":"V", "x":3, "y":2.125}, | |||
{"label":"B", "x":4, "y":2.25}, | |||
{"label":"N", "x":8, "y":2.25}, | |||
{"label":"M", "x":9, "y":2.125}, | |||
{"label":",", "x":10, "y":2}, | |||
{"label":".", "x":11, "y":2.125}, | |||
{"label":"/", "x":12, "y":2.625}, | |||
{"label":"'", "x":0, "y":3.625}, | |||
{"label":"Alt", "x":1, "y":3.125}, | |||
{"label":"Del", "x":2, "y":3}, | |||
{"label":"Enter", "x":3, "y":3.125}, | |||
{"label":"Shift", "x":4, "y":3.25}, | |||
{"label":"Ctrl", "x":5, "y":3.25}, | |||
{"label":"Numb", "x":7, "y":3.25}, | |||
{"label":"Space", "x":8, "y":3.25}, | |||
{"label":"Left", "x":9, "y":3.125}, | |||
{"label":"Down", "x":10, "y":3}, | |||
{"label":"Up", "x":11, "y":3.125}, | |||
{"label":"Right", "x":12, "y":3.625}, | |||
{"label":"[", "x":1, "y":4.25}, | |||
{"label":"(", "x":2, "y":4.25}, | |||
{"label":"Esc", "x":3, "y":4.25}, | |||
{"label":"Media", "x":4, "y":4.25}, | |||
{"label":"GUI", "x":5, "y":4.25}, | |||
{"label":"Tab", "x":7, "y":4.25}, | |||
{"label":"Mouse", "x":8, "y":4.25}, | |||
{"label":"Bspc", "x":9, "y":4.25}, | |||
{"label":")", "x":10, "y":4.25}, | |||
{"label":"]", "x":11, "y":4.25} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,29 @@ | |||
/* | |||
Copyright 2019 Tom Saleeba <ergoslab@techotom.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* Use I2C or Serial, not both */ | |||
#define USE_SERIAL | |||
// #define USE_I2C | |||
/* Select hand configuration */ | |||
// #define MASTER_LEFT | |||
#define MASTER_RIGHT | |||
// #define EE_HANDS |
@ -0,0 +1,73 @@ | |||
#include QMK_KEYBOARD_H | |||
enum layer_names { | |||
BASE, | |||
MDIA, | |||
NUMB, | |||
MOUS | |||
}; | |||
#ifdef RGBLIGHT_ENABLE | |||
#define ERGOSLAB_BRIGHTNESS 112 | |||
#define HSV_ERGOSLAB_ORANGE 28, 255, 16 | |||
#define HSV_ERGOSLAB_RED 0, 255, ERGOSLAB_BRIGHTNESS | |||
#define HSV_ERGOSLAB_GREEN 85, 255, ERGOSLAB_BRIGHTNESS | |||
#define HSV_ERGOSLAB_CYAN 128, 255, ERGOSLAB_BRIGHTNESS | |||
#endif | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[BASE] = LAYOUT_ergoslab( | |||
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, | |||
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, | |||
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, | |||
KC_QUOT, KC_LALT, KC_DEL, KC_ENT, KC_LSFT, KC_LCTL, MO(NUMB), KC_SPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, | |||
KC_LBRC, KC_LPRN, KC_ESC, MO(MDIA),KC_RGUI, KC_TAB, TG(MOUS), KC_BSPC, KC_RPRN, KC_RBRC | |||
), | |||
[MDIA] = LAYOUT_ergoslab( | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, | |||
_______, _______, _______, _______, KC_F11, KC_F12, KC_HOME, KC_PGDN, KC_PGUP, KC_END, | |||
_______, _______, _______, _______, _______, RGB_TOG, _______, _______, _______, KC_MUTE, | |||
_______, RESET, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[NUMB] = LAYOUT_ergoslab( | |||
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_BSLS, KC_PIPE, | |||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, | |||
KC_UNDS, KC_MINS, KC_PLUS, KC_EQL, KC_GRV, KC_COLN, KC_TILD, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, KC_QUOT, KC_DQT, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[MOUS] = LAYOUT_ergoslab( | |||
_______, _______, KC_MS_U, _______, _______, _______, _______, KC_WH_U, _______, _______, | |||
_______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN3, KC_WH_D, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, KC_ACL0, _______, KC_BTN2, KC_BTN1, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; | |||
#ifdef RGBLIGHT_ENABLE | |||
layer_state_t layer_state_set_user(layer_state_t state) { | |||
uint8_t layer = biton32(state); | |||
switch (layer) { | |||
case BASE: | |||
rgblight_sethsv(HSV_ERGOSLAB_ORANGE); | |||
break; | |||
case MDIA: | |||
rgblight_sethsv(HSV_ERGOSLAB_RED); | |||
break; | |||
case NUMB: | |||
rgblight_sethsv(HSV_ERGOSLAB_GREEN); | |||
break; | |||
case MOUS: | |||
rgblight_sethsv(HSV_ERGOSLAB_CYAN); | |||
break; | |||
default: | |||
break; | |||
} | |||
return state; | |||
}; | |||
#endif |
@ -0,0 +1,33 @@ | |||
# ergoslab | |||
![ergoslab](https://raw.githubusercontent.com/tomsaleeba/ergoslab/master/ergoslab.jpg) | |||
A split ergo 5x6 keyboard with hotswap sockets and a heap of thumb keys designed | |||
by Tom Saleeba. [More info on the GitHub | |||
Repo](https://github.com/tomsaleeba/ergoslab). | |||
**Status** The ergoslab is currently being beta-tested. | |||
* Keyboard Maintainer: [Tom Saleeba](https://github.com/tomsaleeba) | |||
* Hardware Supported: Pro Micro (ATmega32U4) | |||
* Hardware Availability: gerbers are available from the [releases page on the | |||
GitHub repo](https://github.com/tomsaleeba/ergoslab/releases). Get them | |||
manufactured at your favourite PCB house. I used JLCPCB. | |||
Make example for this keyboard (after setting up your build environment): | |||
make ergoslab:default | |||
Example of flashing this keyboard: | |||
make ergoslab:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) | |||
and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) | |||
for more information. Brand new to QMK? Start with our | |||
[Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
A build guide for this keyboard can be found here: [Build | |||
Guide](https://github.com/tomsaleeba/ergoslab/blob/master/build-guide.md) |
@ -0,0 +1,71 @@ | |||
/* | |||
Copyright 2019 Tom Saleeba <ergoslab@techotom.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x5148 | |||
#define DEVICE_VER 0x0100 | |||
#define MANUFACTURER tomsaleeba | |||
#define PRODUCT Ergoslab Keyboard | |||
#define DESCRIPTION Split 45 percent ergonomic keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 6 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } | |||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* serial.c configuration for split keyboard */ | |||
#define SOFT_SERIAL_PIN D2 | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLED_NUM 2 // Number of LEDs | |||
// FIXME this following line should enable our layer status LEDs to work on both | |||
// sides without need to wire them into a chain. It doesn't though. Uncommenting | |||
// means the slave side of the keyboard stops working (and the LEDs don't work). | |||
// #define RGBLED_SPLIT {1,1} | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
// #define NO_DEBUG | |||
/* disable print */ | |||
// #define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION |
@ -0,0 +1,18 @@ | |||
#include "rev1.h" | |||
#ifdef SWAP_HANDS_ENABLE | |||
__attribute__ ((weak)) | |||
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { | |||
{{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}}, | |||
{{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}}, | |||
{{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}}, | |||
{{0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}, {5, 8}}, | |||
{{0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}, {5, 9}}, | |||
{{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}}, | |||
{{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}}, | |||
{{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}}, | |||
{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}}, | |||
{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}}, | |||
}; | |||
#endif |
@ -0,0 +1,24 @@ | |||
#pragma once | |||
#include "ergoslab.h" | |||
#include "quantum.h" | |||
#define LAYOUT_ergoslab( \ | |||
L00, L01, L02, L03, L04, R04, R03, R02, R01, R00, \ | |||
L10, L11, L12, L13, L14, R14, R13, R12, R11, R10, \ | |||
L20, L21, L22, L23, L24, R24, R23, R22, R21, R20, \ | |||
L30, L31, L32, L33, L34, L35, R35, R34, R33, R32, R31, R30, \ | |||
L41, L42, L43, L44, L45, R45, R44, R43, R42, R41 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04, KC_NO }, \ | |||
{ L10, L11, L12, L13, L14, KC_NO }, \ | |||
{ L20, L21, L22, L23, L24, KC_NO }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ KC_NO, L41, L42, L43, L44, L45 }, \ | |||
{ R00, R01, R02, R03, R04, KC_NO }, \ | |||
{ R10, R11, R12, R13, R14, KC_NO }, \ | |||
{ R20, R21, R22, R23, R24, KC_NO }, \ | |||
{ R30, R31, R32, R33, R34, R35 }, \ | |||
{ KC_NO, R41, R42, R43, R44, R45 } \ | |||
} |
@ -0,0 +1,35 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SPLIT_KEYBOARD = yes | |||
DEFAULT_FOLDER = ergoslab/rev1 |