@ -0,0 +1,3 @@ | |||
ifndef MAKEFILE_INCLUDED | |||
include ../../Makefile | |||
endif |
@ -0,0 +1,30 @@ | |||
#include "amj40.h" | |||
#include "led.h" | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
led_init_ports(); | |||
}; | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
}; | |||
void led_init_ports(void) { | |||
// * Set our LED pins as output | |||
DDRB |= (1<<2); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { | |||
// Turn capslock on | |||
PORTB &= ~(1<<2); | |||
} else { | |||
// Turn capslock off | |||
PORTB |= (1<<2); | |||
} | |||
} |
@ -0,0 +1,38 @@ | |||
#ifndef AMJ40_H | |||
#define AMJ40_H | |||
#include "quantum.h" | |||
// readability | |||
#define XXX KC_NO | |||
/* AMJ40 ver2.0 layout1 配列一 | |||
* ,-----------------------------------------------------------. | |||
* | 00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B | | |||
* |-----------------------------------------------------------| | |||
* | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1B | | |||
* |-----------------------------------------------------------| | |||
* | 20 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | | |||
* |-----------------------------------------------------------| | |||
* | 30 | 31 | 32 | 34 | 35 | 39 | 3A | 3B | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
#define KEYMAP( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1b, \ | |||
k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ | |||
k30, k31, k32, k34, k35, k39, k3a, k3b \ | |||
) { \ | |||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b}, \ | |||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, XXX, k1b}, \ | |||
{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b}, \ | |||
{k30, k31, k32, XXX, k34, k35, XXX, XXX, XXX, k39, k3a, k3b} \ | |||
} | |||
void matrix_init_user(void); | |||
void matrix_scan_user(void); | |||
#endif |
@ -0,0 +1,94 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6072 | |||
#define DEVICE_VER 0x0002 | |||
#define MANUFACTURER Han Chen | |||
#define PRODUCT AMJ40 | |||
#define DESCRIPTION qmk port of AMJ40 v2 PCB | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 12 | |||
// ROWS: Top to bottom, COLS: Left to right | |||
#define MATRIX_ROW_PINS { F4, F5, F6, F7} | |||
#define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7} | |||
#define UNUSED_PINS | |||
#define BACKLIGHT_PIN B6 | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* Backlight configuration | |||
*/ | |||
#define BACKLIGHT_LEVELS 4 | |||
/* Underlight configuration | |||
*/ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 4 // Number of LEDs | |||
#define RGBLIGHT_HUE_STEP 10 | |||
#define RGBLIGHT_SAT_STEP 17 | |||
#define RGBLIGHT_VAL_STEP 17 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,27 @@ | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
#define ws2812_PORTREG PORTD | |||
#define ws2812_DDRREG DDRD | |||
ifndef QUANTUM_DIR | |||
include ../../../../Makefile | |||
endif |
@ -0,0 +1,42 @@ | |||
#!/bin/bash | |||
# adjust for cpu | |||
# -j 16 gave best result on a hyperthreaded quad core core i7 | |||
LIMIT=10 | |||
THREADS="-j 16" | |||
KMAP=iso_split_rshift | |||
echo "We need sudo later" | |||
sudo ls 2>&1 /dev/null | |||
function wait_bootloader { | |||
echo "Waiting for Bootloader..." | |||
local STARTTIME=$(date +"%s") | |||
local REMIND=0 | |||
local EXEC=dfu-programmer | |||
local TARGET=atmega32u4 | |||
while true | |||
do | |||
sudo $EXEC $TARGET get > /dev/null 2>&1 | |||
[ $? -eq 0 ] && break | |||
ENDTIME=$(date +"%s") | |||
DURATION=$(($ENDTIME-$STARTTIME)) | |||
if [ $REMIND -eq 0 -a $DURATION -gt $LIMIT ] | |||
then | |||
echo "Did you forget to press the reset button?" | |||
REMIND=1 | |||
fi | |||
sleep 1 | |||
done | |||
} | |||
make clean | |||
make KEYMAP=${KMAP} ${THREADS} | |||
if [[ $? -eq 0 ]] | |||
then | |||
echo "please trigger flashing!" | |||
wait_bootloader | |||
sudo make KEYMAP=${KMAP} dfu ${THREADS} | |||
else | |||
echo "make failed" | |||
exit 77 | |||
fi |
@ -0,0 +1,173 @@ | |||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, | |||
// this is the style you want to emulate. | |||
#include "amj40.h" | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _QWERTY 0 | |||
#define _LOWER 1 | |||
#define _RAISE 2 | |||
#define _ADJUST 3 | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
LOWER, | |||
RAISE, | |||
ADJUST, | |||
}; | |||
// increase readability | |||
#define _______ KC_TRNS | |||
#define XXXXXXX KC_NO | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Default Layer | |||
* ,-----------------------------------------------------------. | |||
* | Esc| Q | W | E | R | T | Y | U | I | O | P | BS | | |||
* |-----------------------------------------------------------| | |||
* | Tab | A | S | D | F | G | H | J | K | L | Ent | | |||
* |-----------------------------------------------------------| | |||
* | LSft | Z | X | C | V | B | N | M | , | . | /? | | |||
* |-----------------------------------------------------------| | |||
* | LCtl | LGui| LAlt| spc fn0 | spc fn1 |fn2|RAlt|RCtl | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_QWERTY] = KEYMAP( \ | |||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\ | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,\ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,\ | |||
KC_LCTL, KC_LGUI, KC_LALT, F(0), F(1), F(2), KC_RALT, KC_RCTL \ | |||
), | |||
/* Function Layer 1 HHKB style | |||
* ,-----------------------------------------------------------. | |||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bkspc| | |||
* |-----------------------------------------------------------| | |||
* | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | [ | ] | Pipe | | |||
* |-----------------------------------------------------------| | |||
* | F7 | F8 | F9 | F10 | F11 | F12 | End|PgDn| ↓ | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | Stop| App| | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_LOWER] = KEYMAP( \ | |||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ | |||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, \ | |||
_______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ | |||
), | |||
/* Function Layer 1 HHKB style | |||
* ,-----------------------------------------------------------. | |||
* |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| | |||
* |-----------------------------------------------------------| | |||
* | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | | |||
* |-----------------------------------------------------------| | |||
* | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | Stop| App| | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_RAISE] = KEYMAP( \ | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ | |||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_DEL, \ | |||
_______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG \ | |||
), | |||
/* Function Layer 1 HHKB style | |||
* ,-----------------------------------------------------------. | |||
* |Caps| |MSel| ⏮ | ⏯ | ⏭ |PSCR|SkLk|Paus| ↑ | Ins| Del| | |||
* |-----------------------------------------------------------| | |||
* | | 🔇 | ⏏ | | * | / |Hone|PgUp| ← | → | | | |||
* |-----------------------------------------------------------| | |||
* | | 🔉 | 🔊 | | + | - | End|PgDn| ↓ | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | Stop| App| | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[_ADJUST] = KEYMAP( \ | |||
_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ | |||
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, \ | |||
_______, _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, \ | |||
KC_SYSTEM_SLEEP, _______, _______, _______, _______, _______, _______, _______ \ | |||
), | |||
}; | |||
enum function_id { | |||
LAUNCH, | |||
RGBLED_TOGGLE, | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), | |||
[1] = ACTION_LAYER_TAP_KEY(_RAISE, KC_SPC), | |||
[2] = ACTION_LAYER_TAP_KEY(_ADJUST, KC_LGUI), | |||
}; | |||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||
{ | |||
// MACRODOWN only works in this function | |||
return MACRO_NONE; | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case LOWER: | |||
if (record->event.pressed) { | |||
layer_on(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_LOWER); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
break; | |||
case RAISE: | |||
if (record->event.pressed) { | |||
layer_on(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} else { | |||
layer_off(_RAISE); | |||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||
} | |||
return false; | |||
break; | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
return false; | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1,11 @@ | |||
AMJ40 Default Layout | |||
===================== | |||
##Quantum MK Firmware | |||
For the full Quantum feature list, see the parent readme.md. | |||
# Features | |||
* Based on a combination of the original AMJ40 keymap from the TMK firmware as well as the Planck Ortholinear keyboard's "Lower," "Raise," and "Adjust" layers. | |||
* View the keymap.c file to understand they layout of the keymap. | |||
* Has keys to toggle both the switch LEDs and underglow LEDs. | |||
@ -0,0 +1,4 @@ | |||
#!/bin/bash | |||
git checkout amj60 # gets you on branch amj60 | |||
git fetch origin # gets you up to date with origin | |||
git merge origin/master |
@ -0,0 +1,35 @@ | |||
AMJ40 keyboard firmware | |||
====================== | |||
DIY/Assembled compact 40% keyboard. | |||
Ported by N.Hou from the original TMK firmware. | |||
*Supports both backlight LEDs as well as RGB underglow. | |||
*For reference, the AMJ40 uses pin D3 for underglow lighting. | |||
## Quantum MK Firmware | |||
For the full Quantum feature list, see [the parent readme.md](/readme.md). | |||
## Building | |||
Download or clone the whole firmware and navigate to the keyboards/amj40 | |||
folder. Once your dev env is setup, you'll be able to type `make` to generate | |||
your .hex - you can then use `make dfu` to program your PCB once you hit the | |||
reset button. | |||
Depending on which keymap you would like to use, you will have to compile | |||
slightly differently. | |||
### Default | |||
To build with the default keymap, simply run `sudo make all`. | |||
The .hex file will appear in the root of the qmk firmware folder. | |||
### Original tmk firmware | |||
The original firmware that was used to port to qmk can be found [here](https://github.com/AMJKeyboard/AMJ40). | |||
@ -0,0 +1,66 @@ | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE ?= yes # Console for debug(+400) | |||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870) | |||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) | |||
MIDI_ENABLE ?= no # MIDI controls | |||
AUDIO_ENABLE ?= no | |||
UNICODE_ENABLE ?= no # Unicode | |||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID |