@ -1,4 +1,4 @@ | |||
SUBPROJECT_DEFAULT = rev2 | |||
SUBPROJECT_DEFAULT = rev1 | |||
ifndef MAKEFILE_INCLUDED | |||
include ../../Makefile | |||
@ -1 +0,0 @@ | |||
#include "lets_split.h" |
@ -0,0 +1 @@ | |||
#include "nyquist.h" |
@ -1,28 +1,24 @@ | |||
#ifndef LETS_SPLIT_H | |||
#define LETS_SPLIT_H | |||
#ifndef NYQUIST_H | |||
#define NYQUIST_H | |||
#ifdef SUBPROJECT_rev1 | |||
#include "rev1.h" | |||
#endif | |||
#ifdef SUBPROJECT_rev2 | |||
#include "rev2.h" | |||
#endif | |||
#ifdef SUBPROJECT_rev2fliphalf | |||
#include "rev2fliphalf.h" | |||
#endif | |||
// Used to create a keymap using only KC_ prefixed keys | |||
#define KC_KEYMAP( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ | |||
) \ | |||
KEYMAP( \ | |||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ | |||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ | |||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ | |||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ | |||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \ | |||
KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45 \ | |||
) | |||
#include "quantum.h" |
@ -1,28 +1,66 @@ | |||
#ifndef REV1_H | |||
#define REV1_H | |||
#include "../lets_split.h" | |||
#include "../nyquist.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
//void promicro_bootloader_jmp(bool program); | |||
#ifndef FLIP_HALF | |||
// Standard Keymap | |||
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) | |||
#define KEYMAP( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 }, \ | |||
{ R05, R04, R03, R02, R01, R00 }, \ | |||
{ R15, R14, R13, R12, R11, R10 }, \ | |||
{ R25, R24, R23, R22, R21, R20 }, \ | |||
{ R35, R34, R33, R32, R31, R30 }, \ | |||
{ R45, R44, R43, R42, R41, R40 } \ | |||
} | |||
#else | |||
// Keymap with right side flipped | |||
// (TRRS jack on both halves are to the right) | |||
#define KEYMAP( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \ | |||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 }, \ | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, R34, R35 } \ | |||
{ R30, R31, R32, R33, R34, R35 }, \ | |||
{ R40, R41, R42, R43, R44, R45 } \ | |||
} | |||
#endif | |||
#endif | |||
#endif |
@ -1,3 +0,0 @@ | |||
ifndef MAKEFILE_INCLUDED | |||
include ../../Makefile | |||
endif |
@ -1,91 +0,0 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x3060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Wootpatoot | |||
#define PRODUCT Lets Split v2 | |||
#define DESCRIPTION A split keyboard for the cheap makers | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 6 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { D7, E6, B4, B5 } | |||
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } | |||
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order | |||
#define CATERINA_BOOTLOADER | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D3 | |||
#define RGBLIGHT_TIMER | |||
#define RGBLED_NUM 12 // Number of LEDs | |||
#define ws2812_PORTREG PORTD | |||
#define ws2812_DDRREG DDRD | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
// #define NO_DEBUG | |||
/* disable print */ | |||
// #define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -1,39 +0,0 @@ | |||
#include "lets_split.h" | |||
#ifdef AUDIO_ENABLE | |||
float tone_startup[][2] = SONG(STARTUP_SOUND); | |||
float tone_goodbye[][2] = SONG(GOODBYE_SOUND); | |||
#endif | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
#ifdef AUDIO_ENABLE | |||
_delay_ms(20); // gets rid of tick | |||
PLAY_NOTE_ARRAY(tone_startup, false, 0); | |||
#endif | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; | |||
void shutdown_user(void) { | |||
#ifdef AUDIO_ENABLE | |||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0); | |||
_delay_ms(150); | |||
stop_all_notes(); | |||
#endif | |||
} |
@ -1,60 +0,0 @@ | |||
#ifndef REV2_H | |||
#define REV2_H | |||
#include "../lets_split.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
//void promicro_bootloader_jmp(bool program); | |||
#ifndef FLIP_HALF | |||
// Standard Keymap | |||
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) | |||
#define KEYMAP( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ R05, R04, R03, R02, R01, R00 }, \ | |||
{ R15, R14, R13, R12, R11, R10 }, \ | |||
{ R25, R24, R23, R22, R21, R20 }, \ | |||
{ R35, R34, R33, R32, R31, R30 } \ | |||
} | |||
#else | |||
// Keymap with right side flipped | |||
// (TRRS jack on both halves are to the right) | |||
#define KEYMAP( \ | |||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ R00, R01, R02, R03, R04, R05 }, \ | |||
{ R10, R11, R12, R13, R14, R15 }, \ | |||
{ R20, R21, R22, R23, R24, R25 }, \ | |||
{ R30, R31, R32, R33, R34, R35 } \ | |||
} | |||
#endif | |||
#endif |
@ -1,5 +0,0 @@ | |||
BACKLIGHT_ENABLE = no | |||
ifndef QUANTUM_DIR | |||
include ../../../Makefile | |||
endif |