* Add files via upload * Update readme.md * Update readme.md * Update readme.md * Add files via upload * Delete split_util.h * Delete split_util.c * Delete serial.h * Delete serial.c * Delete matrix.c * Delete i2c.h * Delete i2c.c * Update rules.mk * Update config.h * Update readme.md * Update readme.mdpull/3699/head
@ -0,0 +1,90 @@ | |||
/* | |||
Copyright 2018 Ayden <aydenvis@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef REV1_CONFIG_H | |||
#define REV1_CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xCEEB | |||
#define PRODUCT_ID 0x1256 | |||
#define DEVICE_VER 0x0100 | |||
#define MANUFACTURER AYDENandDAD Youtube | |||
#define PRODUCT QWERTYYdox | |||
#define DESCRIPTION Split 45 percent ergonomic keyboard with two Y keys | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 7 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { B6, B2, B3, B1 } | |||
#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
#define BACKLIGHT_PIN E6 | |||
#define BACKLIGHT_LEVELS 5 | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D6 | |||
#define RGBLIGHT_TIMER | |||
#define RGBLED_NUM 12 // Number of LEDs | |||
#define ws2812_PORTREG PORTD | |||
#define ws2812_DDRREG DDRD | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
// #define NO_DEBUG | |||
/* disable print */ | |||
// #define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,16 @@ | |||
{ | |||
"keyboard_name": "QWERTYYdox", | |||
"manufacturer": "aydenvis", | |||
"identifier": "0x1256", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"processor": "atmega32u4", | |||
"width": 14, | |||
"height": 4, | |||
"layouts": { | |||
"LAYOUT": { | |||
"key_count": 53, | |||
"layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.25}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.5}, {"label":"R00", "x":9, "y":0.5}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.25}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.25}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.5}, {"label":"R10", "x":9, "y":1.5}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.25}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.25}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6.5, "y":3}, {"label":"R20", "x":8.5, "y":3}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.25}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.25}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":5.5, "y":4}, {"label":"L35", "x":6.5, "y":4}, {"label":"R30", "x":8.5, "y":4}, {"label":"R31", "x":9.5, "y":4}, {"label":"R32", "x":12, "y":3}, {"label":"R33", "x":13, "y":3.125}, {"label":"R34", "x":14, "y":3.25}, {"label":"R35", "x":15, "y":3.375}] | |||
} | |||
} | |||
} |
@ -0,0 +1,43 @@ | |||
/* | |||
Copyright 2018 Ayden <aydenvis@gmail.com | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* Use I2C or Serial, not both */ | |||
#define USE_SERIAL | |||
// #define USE_I2C | |||
/* Select hand configuration */ | |||
// #define MASTER_LEFT | |||
#define MASTER_RIGHT | |||
// #define EE_HANDS | |||
#undef RGBLED_NUM | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 12 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define MOUSEKEY_DELAY 150 | |||
#define MOUSEKEY_INTERVAL 20 | |||
#define MOUSEKEY_MAX_SPEED 10 | |||
#define MOUSEKEY_TIME_TO_MAX 10 | |||
#define MOUSEKEY_WHEEL_MAX_SPEED 8 | |||
#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 |
@ -0,0 +1,83 @@ | |||
#include QMK_KEYBOARD_H | |||
extern keymap_config_t keymap_config; | |||
#define _QWERTY 0 | |||
#define _NUM 1 | |||
#define _NAV 2 | |||
enum custom_keycodes { | |||
qwerty = SAFE_RANGE, | |||
nav, | |||
num, | |||
EQL | |||
}; | |||
// #define KC_ KC_TRNS | |||
#define __ KC_NO | |||
#define NAV TO(2) | |||
#define NUM TO(1) | |||
#define ALPHA TO(0) | |||
#define NPLUS KC_KP_PLUS | |||
#define NMINUS KC_KP_MINUS | |||
#define NSTAR KC_KP_ASTERISK | |||
#define NSLASH KC_KP_SLASH | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = LAYOUT( | |||
//,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, __, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_LCTL, KC_LGUI, KC_LALT, qwerty, KC_ENT, KC_DEL, NUM, NAV, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL | |||
//`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' | |||
), | |||
[_NUM] = LAYOUT( | |||
//,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. | |||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NO, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, __, KC_NO, KC_PPLS, KC_PMNS, EQL, KC_PAST, KC_PSLS, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_LCTL, KC_ESC, KC_NO, num, KC_ENT, KC_LSFT, NAV, ALPHA, KC_SPC, KC_BSPC, KC_LEFT, KC_RALT, KC_RGUI, KC_RCTL | |||
//`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' | |||
), | |||
[_NAV] = LAYOUT( | |||
//,--------+--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------+--------. | |||
KC_ESC, KC_NO, KC_ACL0, KC_ACL1, KC_ACL2, KC_WH_L, KC_WH_R, KC_ESC, KC_NO, KC_UP, NSLASH, NSTAR, NMINUS, NPLUS, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_WH_U, KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_NO, KC_NO, KC_NO, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_INS, KC_HOME, KC_PGUP, KC_BTN1, KC_BTN2, KC_WH_D, __, KC_MS_L, KC_MS_U, KC_MS_D, KC_MS_R, KC_NO, KC_NO, | |||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| | |||
KC_DEL, KC_END, KC_PGDN, nav, KC_LCTL, KC_SPC, ALPHA, NUM, KC_LSFT, KC_BSPC, KC_NO, KC_NO, KC_NO, RESET | |||
//`--------+--------+--------+--------+--------+--------+--------/ \--------+--------+--------+--------+--------+--------+--------' | |||
) | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
if (record->event.pressed) { | |||
switch(keycode) { | |||
case qwerty: | |||
SEND_STRING("-QWERTY"); | |||
return false; | |||
case nav: | |||
SEND_STRING("-NAV"); // selects all and copies | |||
return false; | |||
case num: | |||
SEND_STRING("-NUM"); // selects all and copies | |||
return false; | |||
case EQL: | |||
SEND_STRING("="); // selects all and copies | |||
return false; | |||
} | |||
} | |||
return true; | |||
}; |
@ -0,0 +1 @@ | |||
@ -0,0 +1 @@ | |||
#include "qwertyydox.h" |
@ -0,0 +1,24 @@ | |||
#ifndef QWERTYYDOX_H | |||
#define QWERTYYDOX_H | |||
#ifdef KEYBOARD_qwertyydox_rev1 | |||
#include "rev1.h" | |||
#endif | |||
#include "quantum.h" | |||
// Used to create a keymap using only KC_ prefixed keys | |||
#define LAYOUT_kc( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ | |||
) \ | |||
LAYOUT( \ | |||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \ | |||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \ | |||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \ | |||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ | |||
) | |||
#endif |
@ -0,0 +1,27 @@ | |||
QWERTYYdox | |||
==== | |||
![QWERTYYdox](https://imgur.com/gallery/Pwwb0Q0) | |||
A split ergo 4x7 keyboard with 3 thumb keys and 2 Y keys. | |||
**Status** The QWERTYYdox is a personal project, however it is completely functional. | |||
Keyboard Maintainer: /u/aydenvis | |||
Hardware Supported: Pro Micro (ATmega32U4) | |||
Hardware Availability: The whole thing is handwired with plates cut by [/u/JOlimon](stratakb.com) | |||
Make example for this keyboard (after setting up your build environment): | |||
make qwertyydox/rev1:default | |||
Example of flashing this keyboard: | |||
make qwertyydox/rev1:default:avrdude | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||
@ -0,0 +1,91 @@ | |||
/* | |||
Copyright 2018 Ayden <aydenvis@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef REV1_CONFIG_H | |||
#define REV1_CONFIG_H | |||
#include QMK_KEYBOARD_CONFIG_H | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xCEEB | |||
#define PRODUCT_ID 0x1256 | |||
#define DEVICE_VER 0x0100 | |||
#define MANUFACTURER AYDENandDAD | |||
#define PRODUCT QWERTYdox Keyboard | |||
#define DESCRIPTION Split 40 percent keyboard | |||
/* key matrix size */ | |||
// Rows are doubled-up | |||
#define MATRIX_ROWS 8 | |||
#define MATRIX_COLS 7 | |||
// wiring of each half | |||
#define MATRIX_ROW_PINS { B6, B2, B3, B1 } | |||
#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 } | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
// #define BACKLIGHT_LEVELS 3 | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
#define BACKLIGHT_PIN E6 | |||
#define BACKLIGHT_LEVELS 5 | |||
/* ws2812 RGB LED */ | |||
#define RGB_DI_PIN D6 | |||
#define RGBLIGHT_TIMER | |||
#define RGBLED_NUM 12 // Number of LEDs | |||
#define ws2812_PORTREG PORTD | |||
#define ws2812_DDRREG DDRD | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
// #define NO_DEBUG | |||
/* disable print */ | |||
// #define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#endif |
@ -0,0 +1,22 @@ | |||
#include "rev1.h" | |||
#ifdef SSD1306OLED | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
#endif | |||
void matrix_init_kb(void) { | |||
// // green led on | |||
// DDRD |= (1<<5); | |||
// PORTD &= ~(1<<5); | |||
// // orange led on | |||
// DDRB |= (1<<0); | |||
// PORTB &= ~(1<<0); | |||
matrix_init_user(); | |||
}; |
@ -0,0 +1,37 @@ | |||
#ifndef REV1_H | |||
#define REV1_H | |||
#include "qwertyydox.h" | |||
//void promicro_bootloader_jmp(bool program); | |||
#include "quantum.h" | |||
#ifdef USE_I2C | |||
#include <stddef.h> | |||
#ifdef __AVR__ | |||
#include <avr/io.h> | |||
#include <avr/interrupt.h> | |||
#endif | |||
#endif | |||
//void promicro_bootloader_jmp(bool program); | |||
#define LAYOUT( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \ | |||
) \ | |||
{ \ | |||
{ L00, L01, L02, L03, L04, L05, L06 }, \ | |||
{ L10, L11, L12, L13, L14, L15, KC_NO }, \ | |||
{ L20, L21, L22, L23, L24, L25, KC_NO }, \ | |||
{ L30, L31, L32, L33, L34, L35, L36 }, \ | |||
{ R06, R05, R04, R03, R02, R01, R00 }, \ | |||
{ R16, R15, R14, R13, R12, R11, R10 }, \ | |||
{ R26, R25, R24, R23, R22, R21, R20, }, \ | |||
{ R36, R35, R34, R33, R32, R31, R30 } \ | |||
} | |||
#endif |
@ -0,0 +1 @@ | |||
BACKLIGHT_ENABLE = no |
@ -0,0 +1,69 @@ | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Bootloader | |||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||
# different sizes, comment this out, and the correct address will be loaded | |||
# automatically (+60). See bootloader.mk for all options. | |||
BOOTLOADER = caterina | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
SUBPROJECT_rev1 = yes | |||
USE_I2C = yes # I2C is used between the sides | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
SPLIT_KEYBOARD = yes | |||
DEFAULT_FOLDER = qwertyydox/rev1 |