@ -0,0 +1,54 @@ | |||
/* | |||
Copyright 2018 Jumail Mundekkat / MxBlue | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xC714 | |||
#define PRODUCT_ID 0x1010 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER MxBlue | |||
#define PRODUCT JN68M | |||
#define DESCRIPTION Custom PCB for VA68M | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 16 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { B0, B1, D5, D3, D2 } | |||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, D1 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) |
@ -0,0 +1,16 @@ | |||
{ | |||
"keyboard_name": "JN68M", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"bootloader": "atmel-dfu", | |||
"width": 17.25, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}] | |||
}, | |||
"LAYOUT_splitbs": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15.25, "y":1}, {"x":16.25, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":15.25, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":14.25, "y":4}, {"x":15.25, "y":4}, {"x":16.25, "y":4}] | |||
} | |||
} | |||
} |
@ -0,0 +1,37 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "jn68m.h" | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// put your per-action keyboard code here | |||
// runs for every action, just before processing by the firmware | |||
return process_record_user(keycode, record); | |||
} |
@ -0,0 +1,49 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef JN68M_H | |||
#define JN68M_H | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14, K67, K68,\ | |||
K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K69, K70,\ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, \ | |||
K43, K44, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, \ | |||
K56, K57, K58, K59, K60, K61, K63, K64, K65, K66 \ | |||
) { \ | |||
{ K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14, K67, K68 }, \ | |||
{ K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K69, K70 }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42,KC_NO,KC_NO,KC_NO}, \ | |||
{ K43, K44, K45, K46, K47, K48, K49, K50, K51, K52,KC_NO,K53, K54,KC_NO,K55,KC_NO}, \ | |||
{ K56, K57, K58,KC_NO,KC_NO,K59,KC_NO,KC_NO,KC_NO,K60,KC_NO,K61, K63, K64, K65, K66} \ | |||
} | |||
#define LAYOUT_splitbs( \ | |||
K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14, K15, K67, K68,\ | |||
K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K69, K70,\ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, \ | |||
K43, K44, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55, \ | |||
K56, K57, K58, K59, K60, K61, K63, K64, K65, K66 \ | |||
) { \ | |||
{ K1 , K2 , K3 , K4 , K5 , K6 , K7 , K8 , K9 , K10, K11, K12, K13, K14, K67, K68 }, \ | |||
{ K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K69, K70 }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41, K42, K15,KC_NO,KC_NO}, \ | |||
{ K43, K44, K45, K46, K47, K48, K49, K50, K51, K52,KC_NO,K53, K54,KC_NO,K55,KC_NO}, \ | |||
{ K56, K57, K58,KC_NO,KC_NO,K59,KC_NO,KC_NO,KC_NO,K60,KC_NO,K61, K63, K64, K65, K66} \ | |||
} | |||
#endif |
@ -0,0 +1,19 @@ | |||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
// place overrides here |
@ -0,0 +1,75 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines the keycodes used by our macros in process_record_user | |||
enum custom_keycodes { | |||
QMKBEST = SAFE_RANGE, | |||
QMKURL | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_GESC, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSPC, KC_INS, KC_PGUP, | |||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, | |||
KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_PSCR, KC_HOME, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, | |||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
}; | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QMKBEST: | |||
if (record->event.pressed) { | |||
// when keycode QMKBEST is pressed | |||
SEND_STRING("QMK is the best thing ever!"); | |||
} else { | |||
// when keycode QMKBEST is released | |||
} | |||
break; | |||
case QMKURL: | |||
if (record->event.pressed) { | |||
// when keycode QMKURL is pressed | |||
SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); | |||
} else { | |||
// when keycode QMKURL is released | |||
} | |||
break; | |||
} | |||
return true; | |||
} | |||
void matrix_init_user(void) { | |||
} | |||
void matrix_scan_user(void) { | |||
} | |||
void led_set_user(uint8_t usb_led) { | |||
} |
@ -0,0 +1,14 @@ | |||
# JN68M | |||
A custom replacement PCB for the VA68M and a birthday present for a mate. | |||
PCB designed by /u/Xelus22 | |||
Keyboard Maintainer: [MxBlue](https://github.com/mxblu) | |||
Hardware Supported: ATMega32u4 | |||
Hardware Availability: Unavailable unless you happen to be Justin ;) | |||
Make example for this keyboard (after setting up your build environment): | |||
make handwired/jn68m:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,81 @@ | |||
# MCU name | |||
#MCU = at90usb1286 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = atmel-dfu | |||
# If you don't know the bootloader type, then you can specify the | |||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) |