Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Drashna Jaelre <drashna@live.com>pull/15605/head
@ -0,0 +1,101 @@ | |||||
// Copyright 2021 Cedric Vincent (@cdc-mkb) | |||||
// SPDX-License-Identifier: GPL-2.0-or-later | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x1302 | |||||
#define DEVICE_VER 0x0002 | |||||
#define MANUFACTURER MNT Research GmbH | |||||
#define PRODUCT MNT Reform USB Keyboard (Standalone) | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 6 | |||||
#define MATRIX_COLS 14 | |||||
/* | |||||
* Keyboard Matrix Assignments | |||||
* | |||||
* Change this to how you wired your keyboard | |||||
* COLS: AVR pins used for columns, left to right | |||||
* ROWS: AVR pins used for rows, top to bottom | |||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||||
* | |||||
*/ | |||||
#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6, D4 } | |||||
#define MATRIX_COL_PINS { D5, F7, E6, C7, B3, B2, B1, B0, F0, F1, F4, F5, F6, C6 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW, ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
#define BACKLIGHT_PIN B7 | |||||
#define BACKLIGHT_CUSTOM_RESOLUTION 0x400 | |||||
#define BACKLIGHT_LIMIT_VAL 84 | |||||
//#define BACKLIGHT_LEVELS 3 | |||||
//#define BACKLIGHT_BREATHING | |||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||||
#define DEBOUNCE 5 | |||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||||
*/ | |||||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||||
/* | |||||
* Force NKRO | |||||
* | |||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||||
* makefile for this to work.) | |||||
* | |||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||||
* until the next keyboard reset. | |||||
* | |||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||||
* fully operational during normal computer usage. | |||||
* | |||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||||
* power-up. | |||||
* | |||||
*/ | |||||
//#define FORCE_NKRO | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
/* disable these deprecated features by default */ | |||||
#define NO_ACTION_MACRO | |||||
#define NO_ACTION_FUNCTION | |||||
/* Bootmagic Lite key configuration */ | |||||
//#define BOOTMAGIC_LITE_ROW 0 | |||||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,98 @@ | |||||
{ | |||||
"keyboard_name": "MNT Reform USB Keyboard (Standalone)", | |||||
"url": "https://shop.mntmn.com/products/mnt-reform-usb-keyboard-standalone", | |||||
"maintainer": "cdc-mkb", | |||||
"layouts": { | |||||
"LAYOUT": { | |||||
"layout": [ | |||||
{"label": "ESC", "x": 0, "y": 0}, | |||||
{"label": "F1", "x": 1, "y": 0}, | |||||
{"label": "F2", "x": 2, "y": 0}, | |||||
{"label": "F3", "x": 3, "y": 0}, | |||||
{"label": "F4", "x": 4, "y": 0}, | |||||
{"label": "F5", "x": 5, "y": 0}, | |||||
{"label": "F6", "x": 6, "y": 0}, | |||||
{"label": "F7", "x": 7, "y": 0}, | |||||
{"label": "F8", "x": 8, "y": 0}, | |||||
{"label": "F9", "x": 9, "y": 0}, | |||||
{"label": "F10", "x": 10, "y": 0}, | |||||
{"label": "F11", "x": 11, "y": 0}, | |||||
{"label": "F12", "x": 12, "y": 0}, | |||||
{"label": "NO", "x": 13, "y": 0, "w": 1.5}, | |||||
{"label": "GRAVE", "x": 0, "y": 1}, | |||||
{"label": "1", "x": 1, "y": 1}, | |||||
{"label": "2", "x": 2, "y": 1}, | |||||
{"label": "3", "x": 3, "y": 1}, | |||||
{"label": "4", "x": 4, "y": 1}, | |||||
{"label": "5", "x": 5, "y": 1}, | |||||
{"label": "6", "x": 6, "y": 1}, | |||||
{"label": "7", "x": 7, "y": 1}, | |||||
{"label": "8", "x": 8, "y": 1}, | |||||
{"label": "9", "x": 9, "y": 1}, | |||||
{"label": "0", "x": 10, "y": 1}, | |||||
{"label": "MINUS", "x": 11, "y": 1}, | |||||
{"label": "EQUAL", "x": 12, "y": 1}, | |||||
{"label": "BSPACE", "x": 13, "y": 1, "w": 1.5}, | |||||
{"label": "TAB", "x": 0, "y": 2, "w": 1.5}, | |||||
{"label": "Q", "x": 1.5, "y": 2}, | |||||
{"label": "W", "x": 2.5, "y": 2}, | |||||
{"label": "E", "x": 3.5, "y": 2}, | |||||
{"label": "R", "x": 4.5, "y": 2}, | |||||
{"label": "T", "x": 5.5, "y": 2}, | |||||
{"label": "Y", "x": 6.5, "y": 2}, | |||||
{"label": "U", "x": 7.5, "y": 2}, | |||||
{"label": "I", "x": 8.5, "y": 2}, | |||||
{"label": "O", "x": 9.5, "y": 2}, | |||||
{"label": "P", "x": 10.5, "y": 2}, | |||||
{"label": "LBRACKET", "x": 11.5, "y": 2}, | |||||
{"label": "RBRACKET", "x": 12.5, "y": 2}, | |||||
{"label": "BSLASH", "x": 13.5, "y": 2}, | |||||
{"label": "LCTRL", "x": 0, "y": 3}, | |||||
{"label": "APP", "x": 1, "y": 3}, | |||||
{"label": "A", "x": 2, "y": 3}, | |||||
{"label": "S", "x": 3, "y": 3}, | |||||
{"label": "D", "x": 4, "y": 3}, | |||||
{"label": "F", "x": 5, "y": 3}, | |||||
{"label": "G", "x": 6, "y": 3}, | |||||
{"label": "H", "x": 7, "y": 3}, | |||||
{"label": "J", "x": 8, "y": 3}, | |||||
{"label": "K", "x": 9, "y": 3}, | |||||
{"label": "L", "x": 10, "y": 3}, | |||||
{"label": "SCOLON", "x": 11, "y": 3}, | |||||
{"label": "QUOTE", "x": 12, "y": 3}, | |||||
{"label": "ENTER", "x": 13, "y": 3, "w": 1.5}, | |||||
{"label": "LSHIFT", "x": 0, "y": 4, "w": 1.5}, | |||||
{"label": "DEL", "x": 1.5, "y": 4}, | |||||
{"label": "Z", "x": 2.5, "y": 4}, | |||||
{"label": "X", "x": 3.5, "y": 4}, | |||||
{"label": "C", "x": 4.5, "y": 4}, | |||||
{"label": "V", "x": 5.5, "y": 4}, | |||||
{"label": "B", "x": 6.5, "y": 4}, | |||||
{"label": "N", "x": 7.5, "y": 4}, | |||||
{"label": "M", "x": 8.5, "y": 4}, | |||||
{"label": "COMMA", "x": 9.5, "y": 4}, | |||||
{"label": "DOT", "x": 10.5, "y": 4}, | |||||
{"label": "SLASH", "x": 11.5, "y": 4}, | |||||
{"label": "UP", "x": 12.5, "y": 4}, | |||||
{"label": "RSHIFT", "x": 13.5, "y": 4}, | |||||
{"label": "RGUI", "x": 0, "y": 5, "w": 1.5}, | |||||
{"label": "LGUI", "x": 1.5, "y": 5, "w": 1.5}, | |||||
{"label": "RCTRL", "x": 3, "y": 5, "w": 1.5}, | |||||
{"label": "SPACE", "x": 4.5, "y": 5, "w": 1.5}, | |||||
{"label": "LALT", "x": 6, "y": 5}, | |||||
{"label": "RALT", "x": 7, "y": 5}, | |||||
{"label": "SPACE", "x": 8, "y": 5, "w": 1.5}, | |||||
{"label": "PGUP", "x": 9.5, "y": 5}, | |||||
{"label": "PGDOWN", "x": 10.5, "y": 5}, | |||||
{"label": "LEFT", "x": 11.5, "y": 5}, | |||||
{"label": "DOWN", "x": 12.5, "y": 5}, | |||||
{"label": "RIGHT", "x": 13.5, "y": 5}, | |||||
] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,31 @@ | |||||
// Copyright 2021 Cedric Vincent (@cdc-mkb) | |||||
// SPDX-License-Identifier: GPL-2.0-or-later | |||||
#include QMK_KEYBOARD_H | |||||
// Defines names for use in layer keycodes and the keymap | |||||
enum layer_names { | |||||
_BASE, | |||||
_FN, | |||||
}; | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Base */ | |||||
[_BASE] = LAYOUT( | |||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(_FN), | |||||
KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSPACE, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSLASH, | |||||
KC_LCTRL, KC_APP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER, | |||||
KC_LSHIFT, KC_DEL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_UP, KC_RSHIFT, | |||||
KC_RGUI, KC_LGUI, KC_RCTRL, KC_SPACE, KC_LALT, KC_RALT, KC_SPACE, KC_PGUP, KC_PGDOWN, KC_LEFT, KC_DOWN, KC_RIGHT | |||||
), | |||||
[_FN] = LAYOUT( | |||||
_______, BL_DEC, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
}; |
@ -0,0 +1,19 @@ | |||||
# Default layout of MNT Reform USB Keyboard (Standalone) | |||||
This is exactly the same layout as in the original firmware. | |||||
Backlight level can be decreased and increased using Fn+F1 and Fn+F2 | |||||
respectively. | |||||
┏━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━┯━━━━━━━━━━┓ | |||||
┃ Esc │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ Fn ┃ | |||||
┠──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────────┨ | |||||
┃ `~ │ 1! │ 2@ │ 3# │ 4$ │ 5% │ 6^ │ 7& │ 8* │ 9( │ 0) │ -_ │ =+ │ Backspace┃ | |||||
┠──────┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──────┨ | |||||
┃ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [{ │ ]} │ \| ┃ | |||||
┠──────┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──┬───┴──────┨ | |||||
┃ LCtrl│ App │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ;: │ '" │ Enter ┃ | |||||
┠──────┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──┴───┬──────┨ | |||||
┃ LShift │ Del │ Z │ X │ C │ V │ B │ N │ M │ ,< │ .> │ /? │ Up │RShift┃ | |||||
┠──────────┼──────┴──┬───┴──────┼──────┴──┬───┴──┬───┴──┬───┴──────┼──────┼──────┼──────┼──────┼──────┨ | |||||
┃ RGUI │ LGUI │ RCtrl │ Space │ LAlt │ RAlt │ Space │ PgUp │ PgDn │ Left │ Down │ Right┃ | |||||
┗━━━━━━━━━━┷━━━━━━━━━┷━━━━━━━━━━┷━━━━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┷━━━━━━┛ |
@ -0,0 +1,19 @@ | |||||
// Copyright 2021 Cedric Vincent (@cdc-mkb) | |||||
// SPDX-License-Identifier: GPL-2.0-or-later | |||||
#include "mntre.h" | |||||
#ifdef OLED_ENABLE | |||||
bool oled_task_kb(void) { | |||||
if (!oled_task_user()) { return false; } | |||||
static const char PROGMEM qmk_logo[] = { | |||||
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, | |||||
0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, | |||||
0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 | |||||
}; | |||||
oled_write_P(qmk_logo, false); | |||||
return true; | |||||
} | |||||
#endif |
@ -0,0 +1,30 @@ | |||||
// Copyright 2021 Cedric Vincent (@cdc-mkb) | |||||
// SPDX-License-Identifier: GPL-2.0-or-later | |||||
#pragma once | |||||
#include "quantum.h" | |||||
/* This is a shortcut to help you visually see your layout. | |||||
* | |||||
* The first section contains all of the arguments representing the physical | |||||
* layout of the board and position of the keys. | |||||
* | |||||
* The second converts the arguments into a two-dimensional array which | |||||
* represents the switch matrix. | |||||
*/ | |||||
#define LAYOUT( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \ | |||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \ | |||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ | |||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ | |||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, \ | |||||
k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b \ | |||||
) { \ | |||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d }, \ | |||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d }, \ | |||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d }, \ | |||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d }, \ | |||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d }, \ | |||||
{ k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, KC_NO, KC_NO } \ | |||||
} |
@ -0,0 +1,27 @@ | |||||
# MNT Reform USB Keyboard (Standalone) | |||||
![MNT Reform USB Keyboard (Standalone)](https://shop.mntmn.com/spree/products/117/large/reform-standalone-black-full.jpg) | |||||
A compact and slim mechanical keyboard designed for comfort and portability. | |||||
* Keyboard QMK port Maintainer: [cdc-mkb](https://github.com/cdc-mkb) | |||||
* Hardware Supported: MNT Reform USB Keyboard (Standalone) | |||||
* Hardware Availability: https://shop.mntmn.com/products/mnt-reform-usb-keyboard-standalone | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make mntre:default | |||||
Flashing example for this keyboard: | |||||
make mntre:default:flash | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||||
## Bootloader | |||||
Enter the bootloader in 3 ways: | |||||
* **Bootmagic reset**: Hold down the "Esc" key and plug in the keyboard | |||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (default: "Circle" + "R") | |||||
* **Physical reset button**: Remove the keyboard’s frame and toggle the programming DIP switch SW84 on the keyboard to “ON”. Then press the reset button SW83. |
@ -0,0 +1,21 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Bootloader selection | |||||
BOOTLOADER = atmel-dfu | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||||
MOUSEKEY_ENABLE = no # Mouse keys | |||||
EXTRAKEY_ENABLE = no # Audio control and System control | |||||
CONSOLE_ENABLE = no # Console for debug | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
NKRO_ENABLE = no # Enable N-Key Rollover | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
AUDIO_ENABLE = no # Audio output | |||||
OLED_ENABLE = yes | |||||
BACKLIGHT_DRIVER = pwm | |||||