|
@ -0,0 +1,298 @@ |
|
|
|
|
|
// Copyright 2021 Nick Brassel (@tzarc) |
|
|
|
|
|
// Copyright 2023 Pablo Martinez (@elpekenin) <elpekenin@elpekenin.dev> |
|
|
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later |
|
|
|
|
|
|
|
|
|
|
|
#include "qp_internal.h" |
|
|
|
|
|
#include "qp_comms.h" |
|
|
|
|
|
#include "qp_ili9486.h" |
|
|
|
|
|
#include "qp_ili9xxx_opcodes.h" |
|
|
|
|
|
#include "qp_tft_panel.h" |
|
|
|
|
|
|
|
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9486_SPI_ENABLE |
|
|
|
|
|
# include "spi_master.h" |
|
|
|
|
|
# include <qp_comms_spi.h> |
|
|
|
|
|
#endif // QUANTUM_PAINTER_ILI9486_SPI_ENABLE |
|
|
|
|
|
|
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// |
|
|
|
|
|
// Common |
|
|
|
|
|
|
|
|
|
|
|
// Driver storage |
|
|
|
|
|
tft_panel_dc_reset_painter_device_t ili9486_drivers[ILI9486_NUM_DEVICES] = {0}; |
|
|
|
|
|
|
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// |
|
|
|
|
|
// Initialization |
|
|
|
|
|
|
|
|
|
|
|
bool qp_ili9486_init(painter_device_t device, painter_rotation_t rotation) { |
|
|
|
|
|
// clang-format off |
|
|
|
|
|
const uint8_t ili9486_init_sequence[] = { |
|
|
|
|
|
// Command, Delay, N, Data[N] |
|
|
|
|
|
ILI9XXX_CMD_RESET, 120, 0, |
|
|
|
|
|
ILI9XXX_SET_PIX_FMT, 0, 1, 0x55, |
|
|
|
|
|
ILI9XXX_SET_PGAMMA, 0, 15, 0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98, 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x00, |
|
|
|
|
|
ILI9XXX_SET_NGAMMA, 0, 15, 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00, |
|
|
|
|
|
ILI9XXX_SET_POWER_CTL_1, 0, 2, 0x0D, 0x0D, |
|
|
|
|
|
ILI9XXX_SET_POWER_CTL_2, 0, 2, 0x43, 0x00, |
|
|
|
|
|
ILI9XXX_SET_POWER_CTL_3, 0, 1, 0x00, |
|
|
|
|
|
ILI9XXX_SET_VCOM_CTL_1, 0, 4, 0x00, 0x48, 0x00, 0x48, |
|
|
|
|
|
ILI9XXX_SET_INVERSION_CTL, 0, 1, 0x02, |
|
|
|
|
|
}; |
|
|
|
|
|
// clang-format on |
|
|
|
|
|
qp_comms_bulk_command_sequence(device, ili9486_init_sequence, sizeof(ili9486_init_sequence)); |
|
|
|
|
|
|
|
|
|
|
|
// Configure the rotation (i.e. the ordering and direction of memory writes in GRAM) |
|
|
|
|
|
const uint8_t madctl[] = { |
|
|
|
|
|
[QP_ROTATION_0] = ILI9XXX_MADCTL_BGR, |
|
|
|
|
|
[QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV, |
|
|
|
|
|
[QP_ROTATION_180] = ILI9XXX_MADCTL_BGR, |
|
|
|
|
|
[QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV, |
|
|
|
|
|
}; |
|
|
|
|
|
const uint8_t functl[] = { |
|
|
|
|
|
[QP_ROTATION_0] = 0x42, |
|
|
|
|
|
[QP_ROTATION_90] = 0x62, |
|
|
|
|
|
[QP_ROTATION_180] = 0x22, |
|
|
|
|
|
[QP_ROTATION_270] = 0x02, |
|
|
|
|
|
}; |
|
|
|
|
|
|
|
|
|
|
|
// clang-format off |
|
|
|
|
|
uint8_t rotation_sequence[] = { |
|
|
|
|
|
// Command, Delay, N, Data[N] |
|
|
|
|
|
ILI9XXX_SET_MEM_ACS_CTL, 0, 1, madctl[rotation], |
|
|
|
|
|
ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x00, functl[rotation], |
|
|
|
|
|
ILI9XXX_CMD_SLEEP_OFF, 5, 0, |
|
|
|
|
|
ILI9XXX_CMD_DISPLAY_ON, 5, 0, |
|
|
|
|
|
}; |
|
|
|
|
|
// clang-format on |
|
|
|
|
|
qp_comms_bulk_command_sequence(device, rotation_sequence, sizeof(rotation_sequence)); |
|
|
|
|
|
|
|
|
|
|
|
return true; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// |
|
|
|
|
|
// Driver vtable |
|
|
|
|
|
|
|
|
|
|
|
// waveshare variant needs some tweaks due to shift registers |
|
|
|
|
|
static void qp_comms_spi_dc_reset_send_command_odd_cs_pulse(painter_device_t device, uint8_t cmd) { |
|
|
|
|
|
painter_driver_t * driver = (painter_driver_t *)device; |
|
|
|
|
|
qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config; |
|
|
|
|
|
|
|
|
|
|
|
writePinLow(comms_config->spi_config.chip_select_pin); |
|
|
|
|
|
qp_comms_spi_dc_reset_send_command(device, cmd); |
|
|
|
|
|
writePinHigh(comms_config->spi_config.chip_select_pin); |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
static uint32_t qp_comms_spi_send_data_odd_cs_pulse(painter_device_t device, const void *data, uint32_t byte_count) { |
|
|
|
|
|
painter_driver_t * driver = (painter_driver_t *)device; |
|
|
|
|
|
qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config; |
|
|
|
|
|
|
|
|
|
|
|
uint32_t bytes_remaining = byte_count; |
|
|
|
|
|
const uint8_t *p = (const uint8_t *)data; |
|
|
|
|
|
uint32_t max_msg_length = 1024; |
|
|
|
|
|
|
|
|
|
|
|
writePinHigh(comms_config->dc_pin); |
|
|
|
|
|
while (bytes_remaining > 0) { |
|
|
|
|
|
uint32_t bytes_this_loop = QP_MIN(bytes_remaining, max_msg_length); |
|
|
|
|
|
bool odd_bytes = bytes_this_loop & 1; |
|
|
|
|
|
|
|
|
|
|
|
// send data |
|
|
|
|
|
writePinLow(comms_config->spi_config.chip_select_pin); |
|
|
|
|
|
spi_transmit(p, bytes_this_loop); |
|
|
|
|
|
p += bytes_this_loop; |
|
|
|
|
|
|
|
|
|
|
|
// extra CS toggle, for alignment |
|
|
|
|
|
if (odd_bytes) { |
|
|
|
|
|
writePinHigh(comms_config->spi_config.chip_select_pin); |
|
|
|
|
|
writePinLow(comms_config->spi_config.chip_select_pin); |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
bytes_remaining -= bytes_this_loop; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
return byte_count - bytes_remaining; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
static uint32_t qp_ili9486_send_data_toggling(painter_device_t device, const uint8_t *data, uint32_t byte_count) { |
|
|
|
|
|
painter_driver_t * driver = (painter_driver_t *)device; |
|
|
|
|
|
qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config; |
|
|
|
|
|
|
|
|
|
|
|
uint32_t ret; |
|
|
|
|
|
for (uint8_t j = 0; j < byte_count; ++j) { |
|
|
|
|
|
writePinLow(comms_config->spi_config.chip_select_pin); |
|
|
|
|
|
ret = qp_comms_spi_dc_reset_send_data(device, &data[j], 1); |
|
|
|
|
|
writePinHigh(comms_config->spi_config.chip_select_pin); |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
return ret; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
static void qp_comms_spi_send_command_sequence_odd_cs_pulse(painter_device_t device, const uint8_t *sequence, size_t sequence_len) { |
|
|
|
|
|
for (size_t i = 0; i < sequence_len;) { |
|
|
|
|
|
uint8_t command = sequence[i]; |
|
|
|
|
|
uint8_t delay = sequence[i + 1]; |
|
|
|
|
|
uint8_t num_bytes = sequence[i + 2]; |
|
|
|
|
|
|
|
|
|
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, command); |
|
|
|
|
|
if (num_bytes > 0) { |
|
|
|
|
|
qp_ili9486_send_data_toggling(device, &sequence[i + 3], num_bytes); |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
if (delay > 0) { |
|
|
|
|
|
wait_ms(delay); |
|
|
|
|
|
} |
|
|
|
|
|
i += (3 + num_bytes); |
|
|
|
|
|
} |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
static bool qp_ili9486_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) { |
|
|
|
|
|
painter_driver_t * driver = (painter_driver_t *)device; |
|
|
|
|
|
tft_panel_dc_reset_painter_driver_vtable_t *vtable = (tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable; |
|
|
|
|
|
|
|
|
|
|
|
// Fix up the drawing location if required |
|
|
|
|
|
left += driver->offset_x; |
|
|
|
|
|
right += driver->offset_x; |
|
|
|
|
|
top += driver->offset_y; |
|
|
|
|
|
bottom += driver->offset_y; |
|
|
|
|
|
|
|
|
|
|
|
// Check if we need to manually swap the window coordinates based on whether or not we're in a sideways rotation |
|
|
|
|
|
if (vtable->swap_window_coords && (driver->rotation == QP_ROTATION_90 || driver->rotation == QP_ROTATION_270)) { |
|
|
|
|
|
uint16_t temp; |
|
|
|
|
|
|
|
|
|
|
|
temp = left; |
|
|
|
|
|
left = top; |
|
|
|
|
|
top = temp; |
|
|
|
|
|
|
|
|
|
|
|
temp = right; |
|
|
|
|
|
right = bottom; |
|
|
|
|
|
bottom = temp; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
// Set up the x-window |
|
|
|
|
|
uint8_t xbuf[4] = {left >> 8, left & 0xFF, right >> 8, right & 0xFF}; |
|
|
|
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, vtable->opcodes.set_column_address); |
|
|
|
|
|
qp_ili9486_send_data_toggling(device, xbuf, 4); |
|
|
|
|
|
|
|
|
|
|
|
// Set up the y-window |
|
|
|
|
|
uint8_t ybuf[4] = {top >> 8, top & 0xFF, bottom >> 8, bottom & 0xFF}; |
|
|
|
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, vtable->opcodes.set_row_address); |
|
|
|
|
|
qp_ili9486_send_data_toggling(device, ybuf, 4); |
|
|
|
|
|
|
|
|
|
|
|
// Lock in the window |
|
|
|
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, vtable->opcodes.enable_writes); |
|
|
|
|
|
return true; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
// Regular |
|
|
|
|
|
const tft_panel_dc_reset_painter_driver_vtable_t ili9486_driver_vtable = { |
|
|
|
|
|
.base = |
|
|
|
|
|
{ |
|
|
|
|
|
.init = qp_ili9486_init, |
|
|
|
|
|
.power = qp_tft_panel_power, |
|
|
|
|
|
.clear = qp_tft_panel_clear, |
|
|
|
|
|
.flush = qp_tft_panel_flush, |
|
|
|
|
|
.pixdata = qp_tft_panel_pixdata, |
|
|
|
|
|
.viewport = qp_tft_panel_viewport, |
|
|
|
|
|
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, |
|
|
|
|
|
.append_pixels = qp_tft_panel_append_pixels_rgb565, |
|
|
|
|
|
.append_pixdata = qp_tft_panel_append_pixdata, |
|
|
|
|
|
}, |
|
|
|
|
|
.num_window_bytes = 2, |
|
|
|
|
|
.swap_window_coords = false, |
|
|
|
|
|
.opcodes = |
|
|
|
|
|
{ |
|
|
|
|
|
.display_on = ILI9XXX_CMD_DISPLAY_ON, |
|
|
|
|
|
.display_off = ILI9XXX_CMD_DISPLAY_OFF, |
|
|
|
|
|
.set_column_address = ILI9XXX_SET_COL_ADDR, |
|
|
|
|
|
.set_row_address = ILI9XXX_SET_PAGE_ADDR, |
|
|
|
|
|
.enable_writes = ILI9XXX_SET_MEM, |
|
|
|
|
|
}, |
|
|
|
|
|
}; |
|
|
|
|
|
|
|
|
|
|
|
// Waveshare tweaks |
|
|
|
|
|
const tft_panel_dc_reset_painter_driver_vtable_t ili9486_waveshare_driver_vtable = { |
|
|
|
|
|
.base = |
|
|
|
|
|
{ |
|
|
|
|
|
.init = qp_ili9486_init, |
|
|
|
|
|
.power = qp_tft_panel_power, |
|
|
|
|
|
.clear = qp_tft_panel_clear, |
|
|
|
|
|
.flush = qp_tft_panel_flush, |
|
|
|
|
|
.pixdata = qp_tft_panel_pixdata, |
|
|
|
|
|
.viewport = qp_ili9486_viewport, |
|
|
|
|
|
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped, |
|
|
|
|
|
.append_pixels = qp_tft_panel_append_pixels_rgb565, |
|
|
|
|
|
.append_pixdata = qp_tft_panel_append_pixdata, |
|
|
|
|
|
}, |
|
|
|
|
|
.num_window_bytes = 2, |
|
|
|
|
|
.swap_window_coords = false, |
|
|
|
|
|
.opcodes = |
|
|
|
|
|
{ |
|
|
|
|
|
.display_on = ILI9XXX_CMD_DISPLAY_ON, |
|
|
|
|
|
.display_off = ILI9XXX_CMD_DISPLAY_OFF, |
|
|
|
|
|
.set_column_address = ILI9XXX_SET_COL_ADDR, |
|
|
|
|
|
.set_row_address = ILI9XXX_SET_PAGE_ADDR, |
|
|
|
|
|
.enable_writes = ILI9XXX_SET_MEM, |
|
|
|
|
|
}, |
|
|
|
|
|
}; |
|
|
|
|
|
|
|
|
|
|
|
static const painter_comms_with_command_vtable_t spi_comms_odd_cs_pulse_vtable = { |
|
|
|
|
|
.base = |
|
|
|
|
|
{ |
|
|
|
|
|
.comms_init = qp_comms_spi_dc_reset_init, |
|
|
|
|
|
.comms_start = qp_comms_spi_start, |
|
|
|
|
|
.comms_send = qp_comms_spi_send_data_odd_cs_pulse, |
|
|
|
|
|
.comms_stop = qp_comms_spi_stop, |
|
|
|
|
|
}, |
|
|
|
|
|
.send_command = qp_comms_spi_dc_reset_send_command_odd_cs_pulse, |
|
|
|
|
|
.bulk_command_sequence = qp_comms_spi_send_command_sequence_odd_cs_pulse, |
|
|
|
|
|
}; |
|
|
|
|
|
|
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// |
|
|
|
|
|
// SPI |
|
|
|
|
|
|
|
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9486_SPI_ENABLE |
|
|
|
|
|
|
|
|
|
|
|
// Factory function for creating a handle to the ILI9486 device |
|
|
|
|
|
painter_device_t qp_ili9486_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) { |
|
|
|
|
|
for (uint32_t i = 0; i < ILI9486_NUM_DEVICES; ++i) { |
|
|
|
|
|
tft_panel_dc_reset_painter_device_t *driver = &ili9486_drivers[i]; |
|
|
|
|
|
if (!driver->base.driver_vtable) { |
|
|
|
|
|
driver->base.driver_vtable = (const painter_driver_vtable_t *)&ili9486_driver_vtable; |
|
|
|
|
|
driver->base.comms_vtable = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable; |
|
|
|
|
|
driver->base.native_bits_per_pixel = 16; // RGB565 |
|
|
|
|
|
driver->base.panel_width = panel_width; |
|
|
|
|
|
driver->base.panel_height = panel_height; |
|
|
|
|
|
driver->base.rotation = QP_ROTATION_0; |
|
|
|
|
|
driver->base.offset_x = 0; |
|
|
|
|
|
driver->base.offset_y = 0; |
|
|
|
|
|
|
|
|
|
|
|
// SPI and other pin configuration |
|
|
|
|
|
driver->base.comms_config = &driver->spi_dc_reset_config; |
|
|
|
|
|
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin; |
|
|
|
|
|
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor; |
|
|
|
|
|
driver->spi_dc_reset_config.spi_config.lsb_first = false; |
|
|
|
|
|
driver->spi_dc_reset_config.spi_config.mode = spi_mode; |
|
|
|
|
|
driver->spi_dc_reset_config.dc_pin = dc_pin; |
|
|
|
|
|
driver->spi_dc_reset_config.reset_pin = reset_pin; |
|
|
|
|
|
|
|
|
|
|
|
if (!qp_internal_register_device((painter_device_t)driver)) { |
|
|
|
|
|
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t)); |
|
|
|
|
|
return NULL; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
return (painter_device_t)driver; |
|
|
|
|
|
} |
|
|
|
|
|
} |
|
|
|
|
|
return NULL; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
painter_device_t qp_ili9486_make_spi_waveshare_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) { |
|
|
|
|
|
painter_device_t device = qp_ili9486_make_spi_device(panel_width, panel_height, chip_select_pin, dc_pin, reset_pin, spi_divisor, spi_mode); |
|
|
|
|
|
if (device) { |
|
|
|
|
|
tft_panel_dc_reset_painter_device_t *driver = (tft_panel_dc_reset_painter_device_t *)device; |
|
|
|
|
|
driver->base.driver_vtable = (const painter_driver_vtable_t *)&ili9486_waveshare_driver_vtable; |
|
|
|
|
|
driver->base.comms_vtable = (const painter_comms_vtable_t *)&spi_comms_odd_cs_pulse_vtable; |
|
|
|
|
|
} |
|
|
|
|
|
return device; |
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
|
|
#endif // QUANTUM_PAINTER_ILI9486_SPI_ENABLE |
|
|
|
|
|
|
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// |