Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/11878/head
@ -0,0 +1,21 @@ | |||
/* Copyright 2020 Weirdo | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 3 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
// Need to override the SysTick timer to use TIM3 -- this is a 16-bit timer on F303 | |||
// so we need to change resolution and frequency to match. | |||
#define CH_CFG_ST_RESOLUTION 16 | |||
#define CH_CFG_ST_FREQUENCY 10000 | |||
#include_next "chconf.h" |
@ -0,0 +1,52 @@ | |||
/* Copyright 2020 Weirdo | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x7764 | |||
#define PRODUCT_ID 0x676D | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Weirdo | |||
#define PRODUCT Geminate60 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 15 | |||
#define MATRIX_ROW_PINS { A9, A10, B10, B11, B15} | |||
#define MATRIX_COL_PINS { A8, B14, B13, B12, B1, B0, A7 , A1 , A15, B3, B4, B5, B6, B7, B8} | |||
#define DIODE_DIRECTION ROW2COL | |||
#define DEBOUNCE 5 | |||
#define RGB_DI_PIN A6 | |||
#define RGBLED_NUM 1 | |||
//#define RGBLIGHT_DISABLE_KEYCODES | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
@ -0,0 +1,16 @@ | |||
/* Copyright 2020 Weirdo | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "geminate60.h" |
@ -0,0 +1,30 @@ | |||
/* | |||
Copyright 2020 Weirdo | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, K013, K014, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313, \ | |||
K40, K41, K42, K46, K410, K411, K412, K413 ) \ | |||
{ \ | |||
{K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, K013, K014}, \ | |||
{K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113 }, \ | |||
{K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213 }, \ | |||
{K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313 }, \ | |||
{K40, K41, K42, K46, K410, K411, K412, K413 } \ | |||
} |
@ -0,0 +1,524 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/halconf.h | |||
* @brief HAL configuration header. | |||
* @details HAL configuration file, this file allows to enable or disable the | |||
* various device drivers from your application. You may also use | |||
* this file in order to override the device drivers default settings. | |||
* | |||
* @addtogroup HAL_CONF | |||
* @{ | |||
*/ | |||
#ifndef HALCONF_H | |||
# define HALCONF_H | |||
# define _CHIBIOS_HAL_CONF_ | |||
# define _CHIBIOS_HAL_CONF_VER_7_0_ | |||
# include "mcuconf.h" | |||
/** | |||
* @brief Enables the PAL subsystem. | |||
*/ | |||
# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
# define HAL_USE_PAL TRUE | |||
# endif | |||
/** | |||
* @brief Enables the ADC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
# define HAL_USE_ADC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the CAN subsystem. | |||
*/ | |||
# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
# define HAL_USE_CAN FALSE | |||
# endif | |||
/** | |||
* @brief Enables the cryptographic subsystem. | |||
*/ | |||
# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) | |||
# define HAL_USE_CRY FALSE | |||
# endif | |||
/** | |||
* @brief Enables the DAC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
# define HAL_USE_DAC TRUE | |||
# endif | |||
/** | |||
* @brief Enables the GPT subsystem. | |||
*/ | |||
# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
# define HAL_USE_GPT TRUE | |||
# endif | |||
/** | |||
* @brief Enables the I2C subsystem. | |||
*/ | |||
# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
# define HAL_USE_I2C TRUE | |||
# endif | |||
/** | |||
* @brief Enables the I2S subsystem. | |||
*/ | |||
# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
# define HAL_USE_I2S FALSE | |||
# endif | |||
/** | |||
* @brief Enables the ICU subsystem. | |||
*/ | |||
# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
# define HAL_USE_ICU FALSE | |||
# endif | |||
/** | |||
* @brief Enables the MAC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
# define HAL_USE_MAC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the MMC_SPI subsystem. | |||
*/ | |||
# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
# define HAL_USE_MMC_SPI FALSE | |||
# endif | |||
/** | |||
* @brief Enables the PWM subsystem. | |||
*/ | |||
# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
# define HAL_USE_PWM TRUE | |||
# endif | |||
/** | |||
* @brief Enables the RTC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
# define HAL_USE_RTC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SDC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
# define HAL_USE_SDC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SERIAL subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
# define HAL_USE_SERIAL FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SERIAL over USB subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
# define HAL_USE_SERIAL_USB TRUE | |||
# endif | |||
/** | |||
* @brief Enables the SIO subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) | |||
# define HAL_USE_SIO FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SPI subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
# define HAL_USE_SPI TRUE | |||
# endif | |||
/** | |||
* @brief Enables the TRNG subsystem. | |||
*/ | |||
# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) | |||
# define HAL_USE_TRNG FALSE | |||
# endif | |||
/** | |||
* @brief Enables the UART subsystem. | |||
*/ | |||
# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
# define HAL_USE_UART FALSE | |||
# endif | |||
/** | |||
* @brief Enables the USB subsystem. | |||
*/ | |||
# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
# define HAL_USE_USB TRUE | |||
# endif | |||
/** | |||
* @brief Enables the WDG subsystem. | |||
*/ | |||
# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
# define HAL_USE_WDG FALSE | |||
# endif | |||
/** | |||
* @brief Enables the WSPI subsystem. | |||
*/ | |||
# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) | |||
# define HAL_USE_WSPI FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* PAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
# define PAL_USE_CALLBACKS TRUE | |||
# endif | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) | |||
# define PAL_USE_WAIT TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* ADC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
# define ADC_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* CAN driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Sleep mode related APIs inclusion switch. | |||
*/ | |||
# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
# define CAN_USE_SLEEP_MODE TRUE | |||
# endif | |||
/** | |||
* @brief Enforces the driver to use direct callbacks rather than OSAL events. | |||
*/ | |||
# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
# define CAN_ENFORCE_USE_CALLBACKS FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* CRY driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the SW fall-back of the cryptographic driver. | |||
* @details When enabled, this option, activates a fall-back software | |||
* implementation for algorithms not supported by the underlying | |||
* hardware. | |||
* @note Fall-back implementations may not be present for all algorithms. | |||
*/ | |||
# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) | |||
# define HAL_CRY_USE_FALLBACK FALSE | |||
# endif | |||
/** | |||
* @brief Makes the driver forcibly use the fall-back implementations. | |||
*/ | |||
# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) | |||
# define HAL_CRY_ENFORCE_FALLBACK FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* DAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) | |||
# define DAC_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define DAC_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* I2C driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||
*/ | |||
# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* MAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the zero-copy API. | |||
*/ | |||
# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
# define MAC_USE_ZERO_COPY FALSE | |||
# endif | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
# define MAC_USE_EVENTS TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* MMC_SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
* This option is recommended also if the SPI driver does not | |||
* use a DMA channel and heavily loads the CPU. | |||
*/ | |||
# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
# define MMC_NICE_WAITING TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* SDC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Number of initialization attempts before rejecting the card. | |||
* @note Attempts are performed at 10mS intervals. | |||
*/ | |||
# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
# define SDC_INIT_RETRY 100 | |||
# endif | |||
/** | |||
* @brief Include support for MMC cards. | |||
* @note MMC support is not yet implemented so this option must be kept | |||
* at @p FALSE. | |||
*/ | |||
# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
# define SDC_MMC_SUPPORT FALSE | |||
# endif | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
*/ | |||
# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
# define SDC_NICE_WAITING TRUE | |||
# endif | |||
/** | |||
* @brief OCR initialization constant for V20 cards. | |||
*/ | |||
# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) | |||
# define SDC_INIT_OCR_V20 0x50FF8000U | |||
# endif | |||
/** | |||
* @brief OCR initialization constant for non-V20 cards. | |||
*/ | |||
# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) | |||
# define SDC_INIT_OCR 0x80100000U | |||
# endif | |||
/*===========================================================================*/ | |||
/* SERIAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Default bit rate. | |||
* @details Configuration parameter, this is the baud rate selected for the | |||
* default configuration. | |||
*/ | |||
# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
# define SERIAL_DEFAULT_BITRATE 38400 | |||
# endif | |||
/** | |||
* @brief Serial buffers size. | |||
* @details Configuration parameter, you can change the depth of the queue | |||
* buffers depending on the requirements of your application. | |||
* @note The default is 16 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
# define SERIAL_BUFFERS_SIZE 16 | |||
# endif | |||
/*===========================================================================*/ | |||
/* SERIAL_USB driver related setting. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Serial over USB buffers size. | |||
* @details Configuration parameter, the buffer size must be a multiple of | |||
* the USB data endpoint maximum packet size. | |||
* @note The default is 256 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
# define SERIAL_USB_BUFFERS_SIZE 1 | |||
# endif | |||
/** | |||
* @brief Serial over USB number of buffers. | |||
* @note The default is 2 buffers. | |||
*/ | |||
# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||
# define SERIAL_USB_BUFFERS_NUMBER 2 | |||
# endif | |||
/*===========================================================================*/ | |||
/* SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
# define SPI_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables circular transfers APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) | |||
# define SPI_USE_CIRCULAR FALSE | |||
# endif | |||
/** | |||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/** | |||
* @brief Handling method for SPI CS line. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) | |||
# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
# endif | |||
/*===========================================================================*/ | |||
/* UART driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||
# define UART_USE_WAIT FALSE | |||
# endif | |||
/** | |||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define UART_USE_MUTUAL_EXCLUSION FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* USB driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
# define USB_USE_WAIT TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* WSPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) | |||
# define WSPI_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define WSPI_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
#endif /* HALCONF_H */ | |||
/** @} */ |
@ -0,0 +1,79 @@ | |||
{ | |||
"keyboard_name": "geminate60", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 15, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"label":"K00", "x":0, "y":0}, | |||
{"label":"K01", "x":1, "y":0}, | |||
{"label":"K02", "x":2, "y":0}, | |||
{"label":"K0", "x":3, "y":0}, | |||
{"label":"K04", "x":4, "y":0}, | |||
{"label":"K05", "x":5, "y":0}, | |||
{"label":"K06", "x":6, "y":0}, | |||
{"label":"K07", "x":7, "y":0}, | |||
{"label":"K08", "x":8, "y":0}, | |||
{"label":"K09", "x":9, "y":0}, | |||
{"label":"K010", "x":10, "y":0}, | |||
{"label":"K011", "x":11, "y":0}, | |||
{"label":"K012", "x":12, "y":0}, | |||
{"label":"K013", "x":13, "y":0}, | |||
{"label":"K014", "x":14, "y":0}, | |||
{"label":"K10", "x":0, "y":1, "w":1.5}, | |||
{"label":"K11", "x":1.5, "y":1}, | |||
{"label":"K12", "x":2.5, "y":1}, | |||
{"label":"K13", "x":3.5, "y":1}, | |||
{"label":"K14", "x":4.5, "y":1}, | |||
{"label":"K15", "x":5.5, "y":1}, | |||
{"label":"K16", "x":6.5, "y":1}, | |||
{"label":"K17", "x":7.5, "y":1}, | |||
{"label":"K18", "x":8.5, "y":1}, | |||
{"label":"K19", "x":9.5, "y":1}, | |||
{"label":"K110", "x":10.5, "y":1}, | |||
{"label":"K111", "x":11.5, "y":1}, | |||
{"label":"K112", "x":12.5, "y":1}, | |||
{"label":"K113", "x":13.5, "y":1, "w":1.5}, | |||
{"label":"K20", "x":0, "y":2, "w":1.75}, | |||
{"label":"K21", "x":1.75, "y":2}, | |||
{"label":"K22", "x":2.75, "y":2}, | |||
{"label":"K23", "x":3.75, "y":2}, | |||
{"label":"K24", "x":4.75, "y":2}, | |||
{"label":"K25", "x":5.75, "y":2}, | |||
{"label":"K26", "x":6.75, "y":2}, | |||
{"label":"K27", "x":7.75, "y":2}, | |||
{"label":"K28", "x":8.75, "y":2}, | |||
{"label":"K29", "x":9.75, "y":2}, | |||
{"label":"K210", "x":10.75, "y":2}, | |||
{"label":"K211", "x":11.75, "y":2}, | |||
{"label":"K212", "x":12.75, "y":2}, | |||
{"label":"K213", "x":13.75, "y":2, "w":1.25}, | |||
{"label":"K30", "x":0, "y":3, "w":1.25}, | |||
{"label":"K31", "x":1.25, "y":3}, | |||
{"label":"K32", "x":2.25, "y":3}, | |||
{"label":"K33", "x":3.25, "y":3}, | |||
{"label":"K34", "x":4.25, "y":3}, | |||
{"label":"K35", "x":5.25, "y":3}, | |||
{"label":"K36", "x":6.25, "y":3}, | |||
{"label":"K37", "x":7.25, "y":3}, | |||
{"label":"K38", "x":8.25, "y":3}, | |||
{"label":"K39", "x":9.25, "y":3}, | |||
{"label":"K310", "x":10.25, "y":3}, | |||
{"label":"K311", "x":11.25, "y":3}, | |||
{"label":"K312", "x":12.25, "y":3, "w":1.75}, | |||
{"label":"K313", "x":14, "y":3}, | |||
{"label":"K40", "x":0, "y":4, "w":1.25}, | |||
{"label":"K41", "x":1.25, "y":4, "w":1.25}, | |||
{"label":"K42", "x":2.5, "y":4, "w":1.25}, | |||
{"label":"K46", "x":3.75, "y":4, "w":6.25}, | |||
{"label":"K410", "x":10, "y":4, "w":1.25}, | |||
{"label":"K411", "x":11.25, "y":4, "w":1.25}, | |||
{"label":"K412", "x":12.5, "y":4, "w":1.25}, | |||
{"label":"K413", "x":13.75, "y":4, "w":1.25} | |||
] | |||
} | |||
} | |||
,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" | |||
} |
@ -0,0 +1,50 @@ | |||
/* Copyright 2020 Weirdo | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// [Keymaps] -----------------------------------------------------------------// | |||
enum layer_names { | |||
_BASE, | |||
_FN | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, | |||
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, MO(1), | |||
KC_LCTL, KC_LWIN, KC_LALT,KC_SPACE, KC_RALT, KC_RALT, KC_RWIN, KC_RCTL), | |||
[_FN] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT), // | |||
}; | |||
bool led_update_user(led_t led_state) { | |||
if(led_state.caps_lock){ | |||
rgblight_setrgb_at(192, 192, 192, 0); | |||
}else{ | |||
rgblight_setrgb_at(0, 0, 0, 0); | |||
} | |||
return true; | |||
} |
@ -0,0 +1,58 @@ | |||
/* Copyright 2020 Weirdo | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// [Keymaps] -----------------------------------------------------------------// | |||
enum layer_names { _BASE, _FN ,_FN1 ,_FN2 }; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, | |||
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, MO(1), | |||
KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE, KC_RALT, KC_RALT, KC_RWIN, KC_RCTL), | |||
[_FN] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT), // | |||
[_FN1] = LAYOUT(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,), | |||
[_FN2] = LAYOUT(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
}; | |||
bool led_update_user(led_t led_state) { | |||
if(led_state.caps_lock){ | |||
rgblight_setrgb_at(192, 192, 192, 0); | |||
}else{ | |||
rgblight_setrgb_at(0, 0, 0, 0); | |||
} | |||
return true; | |||
} |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,15 @@ | |||
# Geminate60 | |||
![Geminate60](https://www.hualigs.cn/image/600d9391f16d7.jpg) | |||
A 60% keyboard based on STM32f303 | |||
* Keyboard Maintainer: [Weirdo](https://weirdo-f.github.io)(https://github.com/1248314361) | |||
* Hardware Supported: Geminate60 | |||
* Hardware Availability: Not yet | |||
Make example for this keyboard (after setting up your build environment): | |||
make geminate60:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,21 @@ | |||
# MCU name | |||
MCU = STM32F303 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
#LAYOUTS = ortho_5x15 |