* merge * line ending stuff * Added MiniDox keyboard folder / configs / and some keymaps * Updated minidox rev1 config, and readme. Also updated that_canadian keymap to include RGB * cleaned up that_canadian keymap comments * Fixed RGB being enabled by default, now it must be turned on at the keymap levelpull/1489/head
@ -0,0 +1,5 @@ | |||||
SUBPROJECT_DEFAULT = rev1 | |||||
ifndef MAKEFILE_INCLUDED | |||||
include ../../Makefile | |||||
endif |
@ -0,0 +1,74 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_H | |||||
#define CONFIG_H | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xFEED | |||||
#define PRODUCT_ID 0x3060 | |||||
#define MANUFACTURER That-Canadian | |||||
#define PRODUCT MiniDox | |||||
#define DESCRIPTION A compact version of the Ergo Dox | |||||
/* key matrix size */ | |||||
// Rows are doubled-up | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 5 | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* define if matrix has ghost */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* number of backlight levels */ | |||||
// #define BACKLIGHT_LEVELS 3 | |||||
/* Set 0 if debouncing isn't needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() ( \ | |||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||||
) | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
//#define NO_ACTION_MACRO | |||||
//#define NO_ACTION_FUNCTION | |||||
#ifdef SUBPROJECT_rev1 | |||||
#include "rev1/config.h" | |||||
#endif | |||||
#endif |
@ -0,0 +1,162 @@ | |||||
#include <util/twi.h> | |||||
#include <avr/io.h> | |||||
#include <stdlib.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/twi.h> | |||||
#include <stdbool.h> | |||||
#include "i2c.h" | |||||
#ifdef USE_I2C | |||||
// Limits the amount of we wait for any one i2c transaction. | |||||
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is | |||||
// 9 bits, a single transaction will take around 90μs to complete. | |||||
// | |||||
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit | |||||
// poll loop takes at least 8 clock cycles to execute | |||||
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 | |||||
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) | |||||
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; | |||||
static volatile uint8_t slave_buffer_pos; | |||||
static volatile bool slave_has_register_set = false; | |||||
// Wait for an i2c operation to finish | |||||
inline static | |||||
void i2c_delay(void) { | |||||
uint16_t lim = 0; | |||||
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) | |||||
lim++; | |||||
// easier way, but will wait slightly longer | |||||
// _delay_us(100); | |||||
} | |||||
// Setup twi to run at 100kHz | |||||
void i2c_master_init(void) { | |||||
// no prescaler | |||||
TWSR = 0; | |||||
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. | |||||
// Check datasheets for more info. | |||||
TWBR = ((F_CPU/SCL_CLOCK)-16)/2; | |||||
} | |||||
// Start a transaction with the given i2c slave address. The direction of the | |||||
// transfer is set with I2C_READ and I2C_WRITE. | |||||
// returns: 0 => success | |||||
// 1 => error | |||||
uint8_t i2c_master_start(uint8_t address) { | |||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); | |||||
i2c_delay(); | |||||
// check that we started successfully | |||||
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) | |||||
return 1; | |||||
TWDR = address; | |||||
TWCR = (1<<TWINT) | (1<<TWEN); | |||||
i2c_delay(); | |||||
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) | |||||
return 1; // slave did not acknowledge | |||||
else | |||||
return 0; // success | |||||
} | |||||
// Finish the i2c transaction. | |||||
void i2c_master_stop(void) { | |||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); | |||||
uint16_t lim = 0; | |||||
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) | |||||
lim++; | |||||
} | |||||
// Write one byte to the i2c slave. | |||||
// returns 0 => slave ACK | |||||
// 1 => slave NACK | |||||
uint8_t i2c_master_write(uint8_t data) { | |||||
TWDR = data; | |||||
TWCR = (1<<TWINT) | (1<<TWEN); | |||||
i2c_delay(); | |||||
// check if the slave acknowledged us | |||||
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; | |||||
} | |||||
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, | |||||
// if ack=0 the acknowledge bit is not set. | |||||
// returns: byte read from i2c device | |||||
uint8_t i2c_master_read(int ack) { | |||||
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); | |||||
i2c_delay(); | |||||
return TWDR; | |||||
} | |||||
void i2c_reset_state(void) { | |||||
TWCR = 0; | |||||
} | |||||
void i2c_slave_init(uint8_t address) { | |||||
TWAR = address << 0; // slave i2c address | |||||
// TWEN - twi enable | |||||
// TWEA - enable address acknowledgement | |||||
// TWINT - twi interrupt flag | |||||
// TWIE - enable the twi interrupt | |||||
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); | |||||
} | |||||
ISR(TWI_vect); | |||||
ISR(TWI_vect) { | |||||
uint8_t ack = 1; | |||||
switch(TW_STATUS) { | |||||
case TW_SR_SLA_ACK: | |||||
// this device has been addressed as a slave receiver | |||||
slave_has_register_set = false; | |||||
break; | |||||
case TW_SR_DATA_ACK: | |||||
// this device has received data as a slave receiver | |||||
// The first byte that we receive in this transaction sets the location | |||||
// of the read/write location of the slaves memory that it exposes over | |||||
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing | |||||
// slave_buffer_pos after each write. | |||||
if(!slave_has_register_set) { | |||||
slave_buffer_pos = TWDR; | |||||
// don't acknowledge the master if this memory loctaion is out of bounds | |||||
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { | |||||
ack = 0; | |||||
slave_buffer_pos = 0; | |||||
} | |||||
slave_has_register_set = true; | |||||
} else { | |||||
i2c_slave_buffer[slave_buffer_pos] = TWDR; | |||||
BUFFER_POS_INC(); | |||||
} | |||||
break; | |||||
case TW_ST_SLA_ACK: | |||||
case TW_ST_DATA_ACK: | |||||
// master has addressed this device as a slave transmitter and is | |||||
// requesting data. | |||||
TWDR = i2c_slave_buffer[slave_buffer_pos]; | |||||
BUFFER_POS_INC(); | |||||
break; | |||||
case TW_BUS_ERROR: // something went wrong, reset twi state | |||||
TWCR = 0; | |||||
default: | |||||
break; | |||||
} | |||||
// Reset everything, so we are ready for the next TWI interrupt | |||||
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); | |||||
} | |||||
#endif |
@ -0,0 +1,31 @@ | |||||
#ifndef I2C_H | |||||
#define I2C_H | |||||
#include <stdint.h> | |||||
#ifndef F_CPU | |||||
#define F_CPU 16000000UL | |||||
#endif | |||||
#define I2C_READ 1 | |||||
#define I2C_WRITE 0 | |||||
#define I2C_ACK 1 | |||||
#define I2C_NACK 0 | |||||
#define SLAVE_BUFFER_SIZE 0x10 | |||||
// i2c SCL clock frequency | |||||
#define SCL_CLOCK 100000L | |||||
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; | |||||
void i2c_master_init(void); | |||||
uint8_t i2c_master_start(uint8_t address); | |||||
void i2c_master_stop(void); | |||||
uint8_t i2c_master_write(uint8_t data); | |||||
uint8_t i2c_master_read(int); | |||||
void i2c_reset_state(void); | |||||
void i2c_slave_init(uint8_t address); | |||||
#endif |
@ -0,0 +1,168 @@ | |||||
#include "minidox.h" | |||||
#include "action_layer.h" | |||||
#include "eeconfig.h" | |||||
extern keymap_config_t keymap_config; | |||||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||||
// entirely and just use numbers. | |||||
#define _QWERTY 0 | |||||
#define _LOWER 1 | |||||
#define _RAISE 2 | |||||
#define _ADJUST 16 | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
LOWER, | |||||
RAISE, | |||||
ADJUST, | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define _______ KC_TRNS | |||||
#define XXXXXXX KC_NO | |||||
// Defines for task manager and such | |||||
#define CALTDEL LCTL(LALT(KC_DEL)) | |||||
#define TSKMGR LCTL(LSFT(KC_ESC)) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Qwerty | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | Q | W | E | R | T | | Y | U | I | O | P | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | A | S | D | F | G | | H | J | K | L | ; | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Z | X | C | V | B | | N | M | , | . | / | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | Ctrl | LOWER| | | | RAISE| Shift| | |||||
* `-------------| Space| |BckSpc|------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_QWERTY] = KEYMAP( \ | |||||
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ | |||||
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ | |||||
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ | |||||
KC_LCTL, LOWER, KC_SPC, KC_BSPC, RAISE, OSM(MOD_LSFT) \ | |||||
), | |||||
/* Raise | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Tab | Left | Down | Up | Right| | | - | = | [ | ] | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Ctrl| ` | GUI | Alt | | | | | | \ | ' | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | | LOWER| | | | RAISE| | | |||||
* `-------------| | | |------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_RAISE] = KEYMAP( \ | |||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ | |||||
KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ | |||||
KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, _______, _______, _______, _______, KC_BSLS, KC_QUOT, \ | |||||
_______, _______, _______, _______, _______, _______ \ | |||||
), | |||||
/* Lower | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Esc | | | | | | | _ | + | { | } | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Caps| ~ | | | | | | | | | | " | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | | LOWER| | | | RAISE| Del | | |||||
* `-------------| | | Enter|------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_LOWER] = KEYMAP( \ | |||||
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ | |||||
KC_ESC, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ | |||||
KC_CAPS, KC_TILD, _______, _______, _______, _______, _______, _______, KC_PIPE, KC_DQT, \ | |||||
_______, _______, _______, KC_ENT, _______, KC_DEL \ | |||||
), | |||||
/* Adjust (Lower + Raise) | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | F11 | F12 | | | | | | | |Taskmg|caltde| | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Reset| | | | | | | | | | | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | | LOWER| | | | RAISE| | | |||||
* `-------------| | | |------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_ADJUST] = KEYMAP( \ | |||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, \ | |||||
KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, TSKMGR, CALTDEL, \ | |||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||||
_______, _______, _______, _______, _______, _______ \ | |||||
) | |||||
}; | |||||
void persistant_default_layer_set(uint16_t default_layer) { | |||||
eeconfig_update_default_layer(default_layer); | |||||
default_layer_set(default_layer); | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
#ifdef AUDIO_ENABLE | |||||
PLAY_NOTE_ARRAY(tone_qwerty, false, 0); | |||||
#endif | |||||
persistant_default_layer_set(1UL<<_QWERTY); | |||||
} | |||||
return false; | |||||
break; | |||||
case LOWER: | |||||
if (record->event.pressed) { | |||||
layer_on(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case RAISE: | |||||
if (record->event.pressed) { | |||||
layer_on(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,5 @@ | |||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||||
ifndef QUANTUM_DIR | |||||
include ../../../../Makefile | |||||
endif |
@ -0,0 +1,37 @@ | |||||
/* | |||||
This is the c configuration file for the keymap | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
Copyright 2015 Jack Humbert | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef CONFIG_USER_H | |||||
#define CONFIG_USER_H | |||||
#include "../../config.h" | |||||
#define USE_SERIAL | |||||
/* ws2812 RGB LED */ | |||||
#define RGB_DI_PIN D7 | |||||
#define RGBLIGHT_TIMER | |||||
#define RGBLED_NUM 4 // Number of LEDs | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define RGBLIGHT_HUE_STEP 10 | |||||
#define RGBLIGHT_SAT_STEP 17 | |||||
#define RGBLIGHT_VAL_STEP 17 | |||||
#endif |
@ -0,0 +1,172 @@ | |||||
#include "minidox.h" | |||||
#include "action_layer.h" | |||||
#include "eeconfig.h" | |||||
extern keymap_config_t keymap_config; | |||||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||||
// entirely and just use numbers. | |||||
#define _QWERTY 0 | |||||
#define _LOWER 1 | |||||
#define _RAISE 2 | |||||
#define _ADJUST 16 | |||||
enum custom_keycodes { | |||||
QWERTY = SAFE_RANGE, | |||||
LOWER, | |||||
RAISE, | |||||
ADJUST, | |||||
}; | |||||
// Fillers to make layering more clear | |||||
#define _______ KC_TRNS | |||||
#define XXXXXXX KC_NO | |||||
// Defines for task manager and such | |||||
#define CALTDEL LCTL(LALT(KC_DEL)) | |||||
#define TSKMGR LCTL(LSFT(KC_ESC)) | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* Qwerty | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | Q | W | E | R | T | | Y | U | I | O | P | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | A | S | D | F | G | | H | J | K | L | ; | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Z | X | C | V | B | | N | M | , | . | / | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | Ctrl | LOWER| | | | RAISE| Shift| | |||||
* `-------------| Space| |BckSpc|------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_QWERTY] = KEYMAP( \ | |||||
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ | |||||
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ | |||||
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ | |||||
KC_LCTL, LOWER, KC_SPC, KC_BSPC, RAISE, OSM(MOD_LSFT) \ | |||||
), | |||||
/* Raise | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Tab | Left | Down | Up | Right| | | - | = | [ | ] | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Ctrl| ` | GUI | Alt | | | | | | \ | ' | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | | LOWER| | | | RAISE| | | |||||
* `-------------| | | |------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_RAISE] = KEYMAP( \ | |||||
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ | |||||
KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ | |||||
KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, _______, _______, _______, _______, KC_BSLS, KC_QUOT, \ | |||||
_______, _______, _______, _______, _______, _______ \ | |||||
), | |||||
/* Lower | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Esc | | | | | | | _ | + | { | } | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Caps| ~ | | | | | | | | | | " | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | | LOWER| | | | RAISE| Del | | |||||
* `-------------| | | Enter|------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_LOWER] = KEYMAP( \ | |||||
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ | |||||
KC_ESC, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ | |||||
KC_CAPS, KC_TILD, _______, _______, _______, _______, _______, _______, KC_PIPE, KC_DQT, \ | |||||
_______, _______, _______, KC_ENT, _______, KC_DEL \ | |||||
), | |||||
/* Adjust (Lower + Raise) | |||||
* | |||||
* ,----------------------------------. ,----------------------------------. | |||||
* | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | Up | F9 | F10 | | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | F11 | F12 | | | | | | Left | Down |Right |caltde| | |||||
* |------+------+------+------+------| |------+------+------+------+------| | |||||
* | Reset| | | | | | | | F8 |Taskmg| | | |||||
* `----------------------------------' `----------------------------------' | |||||
* ,--------------------. ,------,-------------. | |||||
* | | LOWER| | | | RAISE| | | |||||
* `-------------| | | |------+------. | |||||
* | | | | | |||||
* `------' `------' | |||||
*/ | |||||
[_ADJUST] = KEYMAP( \ | |||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_UP, KC_F9, KC_F10, \ | |||||
KC_F11, KC_F12, _______, RGB_SAI, RGB_SAD, _______, KC_LEFT, KC_DOWN, KC_RGHT, CALTDEL, \ | |||||
RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_VAI, RGB_VAD, KC_F8, TSKMGR, _______, \ | |||||
_______, _______, _______, _______, _______, _______ \ | |||||
) | |||||
}; | |||||
#ifdef AUDIO_ENABLE | |||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND); | |||||
#endif | |||||
void persistant_default_layer_set(uint16_t default_layer) { | |||||
eeconfig_update_default_layer(default_layer); | |||||
default_layer_set(default_layer); | |||||
} | |||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||||
switch (keycode) { | |||||
case QWERTY: | |||||
if (record->event.pressed) { | |||||
#ifdef AUDIO_ENABLE | |||||
PLAY_NOTE_ARRAY(tone_qwerty, false, 0); | |||||
#endif | |||||
persistant_default_layer_set(1UL<<_QWERTY); | |||||
} | |||||
return false; | |||||
break; | |||||
case LOWER: | |||||
if (record->event.pressed) { | |||||
layer_on(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_LOWER); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case RAISE: | |||||
if (record->event.pressed) { | |||||
layer_on(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} else { | |||||
layer_off(_RAISE); | |||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
case ADJUST: | |||||
if (record->event.pressed) { | |||||
layer_on(_ADJUST); | |||||
} else { | |||||
layer_off(_ADJUST); | |||||
} | |||||
return false; | |||||
break; | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,318 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
/* | |||||
* scan matrix | |||||
*/ | |||||
#include <stdint.h> | |||||
#include <stdbool.h> | |||||
#include <avr/io.h> | |||||
#include <avr/wdt.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include "print.h" | |||||
#include "debug.h" | |||||
#include "util.h" | |||||
#include "matrix.h" | |||||
#include "split_util.h" | |||||
#include "pro_micro.h" | |||||
#include "config.h" | |||||
#ifdef USE_I2C | |||||
# include "i2c.h" | |||||
#else // USE_SERIAL | |||||
# include "serial.h" | |||||
#endif | |||||
#ifndef DEBOUNCE | |||||
# define DEBOUNCE 5 | |||||
#endif | |||||
#define ERROR_DISCONNECT_COUNT 5 | |||||
static uint8_t debouncing = DEBOUNCE; | |||||
static const int ROWS_PER_HAND = MATRIX_ROWS/2; | |||||
static uint8_t error_count = 0; | |||||
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; | |||||
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; | |||||
/* matrix state(1:on, 0:off) */ | |||||
static matrix_row_t matrix[MATRIX_ROWS]; | |||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||||
static matrix_row_t read_cols(void); | |||||
static void init_cols(void); | |||||
static void unselect_rows(void); | |||||
static void select_row(uint8_t row); | |||||
__attribute__ ((weak)) | |||||
void matrix_init_quantum(void) { | |||||
matrix_init_kb(); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_quantum(void) { | |||||
matrix_scan_kb(); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_init_kb(void) { | |||||
matrix_init_user(); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_kb(void) { | |||||
matrix_scan_user(); | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_init_user(void) { | |||||
} | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_user(void) { | |||||
} | |||||
inline | |||||
uint8_t matrix_rows(void) | |||||
{ | |||||
return MATRIX_ROWS; | |||||
} | |||||
inline | |||||
uint8_t matrix_cols(void) | |||||
{ | |||||
return MATRIX_COLS; | |||||
} | |||||
void matrix_init(void) | |||||
{ | |||||
debug_enable = true; | |||||
debug_matrix = true; | |||||
debug_mouse = true; | |||||
// initialize row and col | |||||
unselect_rows(); | |||||
init_cols(); | |||||
TX_RX_LED_INIT; | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||||
matrix[i] = 0; | |||||
matrix_debouncing[i] = 0; | |||||
} | |||||
matrix_init_quantum(); | |||||
} | |||||
uint8_t _matrix_scan(void) | |||||
{ | |||||
// Right hand is stored after the left in the matirx so, we need to offset it | |||||
int offset = isLeftHand ? 0 : (ROWS_PER_HAND); | |||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { | |||||
select_row(i); | |||||
_delay_us(30); // without this wait read unstable value. | |||||
matrix_row_t cols = read_cols(); | |||||
if (matrix_debouncing[i+offset] != cols) { | |||||
matrix_debouncing[i+offset] = cols; | |||||
debouncing = DEBOUNCE; | |||||
} | |||||
unselect_rows(); | |||||
} | |||||
if (debouncing) { | |||||
if (--debouncing) { | |||||
_delay_ms(1); | |||||
} else { | |||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { | |||||
matrix[i+offset] = matrix_debouncing[i+offset]; | |||||
} | |||||
} | |||||
} | |||||
return 1; | |||||
} | |||||
#ifdef USE_I2C | |||||
// Get rows from other half over i2c | |||||
int i2c_transaction(void) { | |||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||||
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); | |||||
if (err) goto i2c_error; | |||||
// start of matrix stored at 0x00 | |||||
err = i2c_master_write(0x00); | |||||
if (err) goto i2c_error; | |||||
// Start read | |||||
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); | |||||
if (err) goto i2c_error; | |||||
if (!err) { | |||||
int i; | |||||
for (i = 0; i < ROWS_PER_HAND-1; ++i) { | |||||
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); | |||||
} | |||||
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); | |||||
i2c_master_stop(); | |||||
} else { | |||||
i2c_error: // the cable is disconnceted, or something else went wrong | |||||
i2c_reset_state(); | |||||
return err; | |||||
} | |||||
return 0; | |||||
} | |||||
#else // USE_SERIAL | |||||
int serial_transaction(void) { | |||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||||
if (serial_update_buffers()) { | |||||
return 1; | |||||
} | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
matrix[slaveOffset+i] = serial_slave_buffer[i]; | |||||
} | |||||
return 0; | |||||
} | |||||
#endif | |||||
uint8_t matrix_scan(void) | |||||
{ | |||||
int ret = _matrix_scan(); | |||||
#ifdef USE_I2C | |||||
if( i2c_transaction() ) { | |||||
#else // USE_SERIAL | |||||
if( serial_transaction() ) { | |||||
#endif | |||||
// turn on the indicator led when halves are disconnected | |||||
TXLED1; | |||||
error_count++; | |||||
if (error_count > ERROR_DISCONNECT_COUNT) { | |||||
// reset other half if disconnected | |||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
matrix[slaveOffset+i] = 0; | |||||
} | |||||
} | |||||
} else { | |||||
// turn off the indicator led on no error | |||||
TXLED0; | |||||
error_count = 0; | |||||
} | |||||
matrix_scan_quantum(); | |||||
return ret; | |||||
} | |||||
void matrix_slave_scan(void) { | |||||
_matrix_scan(); | |||||
int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); | |||||
#ifdef USE_I2C | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
/* i2c_slave_buffer[i] = matrix[offset+i]; */ | |||||
i2c_slave_buffer[i] = matrix[offset+i]; | |||||
} | |||||
#else // USE_SERIAL | |||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { | |||||
serial_slave_buffer[i] = matrix[offset+i]; | |||||
} | |||||
#endif | |||||
} | |||||
bool matrix_is_modified(void) | |||||
{ | |||||
if (debouncing) return false; | |||||
return true; | |||||
} | |||||
inline | |||||
bool matrix_is_on(uint8_t row, uint8_t col) | |||||
{ | |||||
return (matrix[row] & ((matrix_row_t)1<<col)); | |||||
} | |||||
inline | |||||
matrix_row_t matrix_get_row(uint8_t row) | |||||
{ | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) | |||||
{ | |||||
print("\nr/c 0123456789ABCDEF\n"); | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
phex(row); print(": "); | |||||
pbin_reverse16(matrix_get_row(row)); | |||||
print("\n"); | |||||
} | |||||
} | |||||
uint8_t matrix_key_count(void) | |||||
{ | |||||
uint8_t count = 0; | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
count += bitpop16(matrix[i]); | |||||
} | |||||
return count; | |||||
} | |||||
static void init_cols(void) | |||||
{ | |||||
for(int x = 0; x < MATRIX_COLS; x++) { | |||||
_SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); | |||||
_SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); | |||||
} | |||||
} | |||||
static matrix_row_t read_cols(void) | |||||
{ | |||||
matrix_row_t result = 0; | |||||
for(int x = 0; x < MATRIX_COLS; x++) { | |||||
result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); | |||||
} | |||||
return result; | |||||
} | |||||
static void unselect_rows(void) | |||||
{ | |||||
for(int x = 0; x < ROWS_PER_HAND; x++) { | |||||
_SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); | |||||
_SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); | |||||
} | |||||
} | |||||
static void select_row(uint8_t row) | |||||
{ | |||||
_SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); | |||||
_SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); | |||||
} |
@ -0,0 +1 @@ | |||||
#include "minidox.h" |
@ -0,0 +1,10 @@ | |||||
#ifndef MINIDOX_H | |||||
#define MINIDOX_H | |||||
#ifdef SUBPROJECT_rev1 | |||||
#include "rev1.h" | |||||
#endif | |||||
#include "quantum.h" | |||||
#endif |
@ -0,0 +1,362 @@ | |||||
/* | |||||
pins_arduino.h - Pin definition functions for Arduino | |||||
Part of Arduino - http://www.arduino.cc/ | |||||
Copyright (c) 2007 David A. Mellis | |||||
This library is free software; you can redistribute it and/or | |||||
modify it under the terms of the GNU Lesser General Public | |||||
License as published by the Free Software Foundation; either | |||||
version 2.1 of the License, or (at your option) any later version. | |||||
This library is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |||||
Lesser General Public License for more details. | |||||
You should have received a copy of the GNU Lesser General | |||||
Public License along with this library; if not, write to the | |||||
Free Software Foundation, Inc., 59 Temple Place, Suite 330, | |||||
Boston, MA 02111-1307 USA | |||||
$Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ | |||||
*/ | |||||
#ifndef Pins_Arduino_h | |||||
#define Pins_Arduino_h | |||||
#include <avr/pgmspace.h> | |||||
// Workaround for wrong definitions in "iom32u4.h". | |||||
// This should be fixed in the AVR toolchain. | |||||
#undef UHCON | |||||
#undef UHINT | |||||
#undef UHIEN | |||||
#undef UHADDR | |||||
#undef UHFNUM | |||||
#undef UHFNUML | |||||
#undef UHFNUMH | |||||
#undef UHFLEN | |||||
#undef UPINRQX | |||||
#undef UPINTX | |||||
#undef UPNUM | |||||
#undef UPRST | |||||
#undef UPCONX | |||||
#undef UPCFG0X | |||||
#undef UPCFG1X | |||||
#undef UPSTAX | |||||
#undef UPCFG2X | |||||
#undef UPIENX | |||||
#undef UPDATX | |||||
#undef TCCR2A | |||||
#undef WGM20 | |||||
#undef WGM21 | |||||
#undef COM2B0 | |||||
#undef COM2B1 | |||||
#undef COM2A0 | |||||
#undef COM2A1 | |||||
#undef TCCR2B | |||||
#undef CS20 | |||||
#undef CS21 | |||||
#undef CS22 | |||||
#undef WGM22 | |||||
#undef FOC2B | |||||
#undef FOC2A | |||||
#undef TCNT2 | |||||
#undef TCNT2_0 | |||||
#undef TCNT2_1 | |||||
#undef TCNT2_2 | |||||
#undef TCNT2_3 | |||||
#undef TCNT2_4 | |||||
#undef TCNT2_5 | |||||
#undef TCNT2_6 | |||||
#undef TCNT2_7 | |||||
#undef OCR2A | |||||
#undef OCR2_0 | |||||
#undef OCR2_1 | |||||
#undef OCR2_2 | |||||
#undef OCR2_3 | |||||
#undef OCR2_4 | |||||
#undef OCR2_5 | |||||
#undef OCR2_6 | |||||
#undef OCR2_7 | |||||
#undef OCR2B | |||||
#undef OCR2_0 | |||||
#undef OCR2_1 | |||||
#undef OCR2_2 | |||||
#undef OCR2_3 | |||||
#undef OCR2_4 | |||||
#undef OCR2_5 | |||||
#undef OCR2_6 | |||||
#undef OCR2_7 | |||||
#define NUM_DIGITAL_PINS 30 | |||||
#define NUM_ANALOG_INPUTS 12 | |||||
#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) | |||||
#define TXLED0 PORTD |= (1<<5) | |||||
#define TXLED1 PORTD &= ~(1<<5) | |||||
#define RXLED0 PORTB |= (1<<0) | |||||
#define RXLED1 PORTB &= ~(1<<0) | |||||
static const uint8_t SDA = 2; | |||||
static const uint8_t SCL = 3; | |||||
#define LED_BUILTIN 13 | |||||
// Map SPI port to 'new' pins D14..D17 | |||||
static const uint8_t SS = 17; | |||||
static const uint8_t MOSI = 16; | |||||
static const uint8_t MISO = 14; | |||||
static const uint8_t SCK = 15; | |||||
// Mapping of analog pins as digital I/O | |||||
// A6-A11 share with digital pins | |||||
static const uint8_t ADC0 = 18; | |||||
static const uint8_t ADC1 = 19; | |||||
static const uint8_t ADC2 = 20; | |||||
static const uint8_t ADC3 = 21; | |||||
static const uint8_t ADC4 = 22; | |||||
static const uint8_t ADC5 = 23; | |||||
static const uint8_t ADC6 = 24; // D4 | |||||
static const uint8_t ADC7 = 25; // D6 | |||||
static const uint8_t ADC8 = 26; // D8 | |||||
static const uint8_t ADC9 = 27; // D9 | |||||
static const uint8_t ADC10 = 28; // D10 | |||||
static const uint8_t ADC11 = 29; // D12 | |||||
#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) | |||||
#define digitalPinToPCICRbit(p) 0 | |||||
#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) | |||||
#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) | |||||
// __AVR_ATmega32U4__ has an unusual mapping of pins to channels | |||||
extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; | |||||
#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) | |||||
#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) | |||||
#ifdef ARDUINO_MAIN | |||||
// On the Arduino board, digital pins are also used | |||||
// for the analog output (software PWM). Analog input | |||||
// pins are a separate set. | |||||
// ATMEL ATMEGA32U4 / ARDUINO LEONARDO | |||||
// | |||||
// D0 PD2 RXD1/INT2 | |||||
// D1 PD3 TXD1/INT3 | |||||
// D2 PD1 SDA SDA/INT1 | |||||
// D3# PD0 PWM8/SCL OC0B/SCL/INT0 | |||||
// D4 A6 PD4 ADC8 | |||||
// D5# PC6 ??? OC3A/#OC4A | |||||
// D6# A7 PD7 FastPWM #OC4D/ADC10 | |||||
// D7 PE6 INT6/AIN0 | |||||
// | |||||
// D8 A8 PB4 ADC11/PCINT4 | |||||
// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 | |||||
// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 | |||||
// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 | |||||
// D12 A11 PD6 T1/#OC4D/ADC9 | |||||
// D13# PC7 PWM10 CLK0/OC4A | |||||
// | |||||
// A0 D18 PF7 ADC7 | |||||
// A1 D19 PF6 ADC6 | |||||
// A2 D20 PF5 ADC5 | |||||
// A3 D21 PF4 ADC4 | |||||
// A4 D22 PF1 ADC1 | |||||
// A5 D23 PF0 ADC0 | |||||
// | |||||
// New pins D14..D17 to map SPI port to digital pins | |||||
// | |||||
// MISO D14 PB3 MISO,PCINT3 | |||||
// SCK D15 PB1 SCK,PCINT1 | |||||
// MOSI D16 PB2 MOSI,PCINT2 | |||||
// SS D17 PB0 RXLED,SS/PCINT0 | |||||
// | |||||
// Connected LEDs on board for TX and RX | |||||
// TXLED D24 PD5 XCK1 | |||||
// RXLED D17 PB0 | |||||
// HWB PE2 HWB | |||||
// these arrays map port names (e.g. port B) to the | |||||
// appropriate addresses for various functions (e.g. reading | |||||
// and writing) | |||||
const uint16_t PROGMEM port_to_mode_PGM[] = { | |||||
NOT_A_PORT, | |||||
NOT_A_PORT, | |||||
(uint16_t) &DDRB, | |||||
(uint16_t) &DDRC, | |||||
(uint16_t) &DDRD, | |||||
(uint16_t) &DDRE, | |||||
(uint16_t) &DDRF, | |||||
}; | |||||
const uint16_t PROGMEM port_to_output_PGM[] = { | |||||
NOT_A_PORT, | |||||
NOT_A_PORT, | |||||
(uint16_t) &PORTB, | |||||
(uint16_t) &PORTC, | |||||
(uint16_t) &PORTD, | |||||
(uint16_t) &PORTE, | |||||
(uint16_t) &PORTF, | |||||
}; | |||||
const uint16_t PROGMEM port_to_input_PGM[] = { | |||||
NOT_A_PORT, | |||||
NOT_A_PORT, | |||||
(uint16_t) &PINB, | |||||
(uint16_t) &PINC, | |||||
(uint16_t) &PIND, | |||||
(uint16_t) &PINE, | |||||
(uint16_t) &PINF, | |||||
}; | |||||
const uint8_t PROGMEM digital_pin_to_port_PGM[] = { | |||||
PD, // D0 - PD2 | |||||
PD, // D1 - PD3 | |||||
PD, // D2 - PD1 | |||||
PD, // D3 - PD0 | |||||
PD, // D4 - PD4 | |||||
PC, // D5 - PC6 | |||||
PD, // D6 - PD7 | |||||
PE, // D7 - PE6 | |||||
PB, // D8 - PB4 | |||||
PB, // D9 - PB5 | |||||
PB, // D10 - PB6 | |||||
PB, // D11 - PB7 | |||||
PD, // D12 - PD6 | |||||
PC, // D13 - PC7 | |||||
PB, // D14 - MISO - PB3 | |||||
PB, // D15 - SCK - PB1 | |||||
PB, // D16 - MOSI - PB2 | |||||
PB, // D17 - SS - PB0 | |||||
PF, // D18 - A0 - PF7 | |||||
PF, // D19 - A1 - PF6 | |||||
PF, // D20 - A2 - PF5 | |||||
PF, // D21 - A3 - PF4 | |||||
PF, // D22 - A4 - PF1 | |||||
PF, // D23 - A5 - PF0 | |||||
PD, // D24 - PD5 | |||||
PD, // D25 / D6 - A7 - PD7 | |||||
PB, // D26 / D8 - A8 - PB4 | |||||
PB, // D27 / D9 - A9 - PB5 | |||||
PB, // D28 / D10 - A10 - PB6 | |||||
PD, // D29 / D12 - A11 - PD6 | |||||
}; | |||||
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { | |||||
_BV(2), // D0 - PD2 | |||||
_BV(3), // D1 - PD3 | |||||
_BV(1), // D2 - PD1 | |||||
_BV(0), // D3 - PD0 | |||||
_BV(4), // D4 - PD4 | |||||
_BV(6), // D5 - PC6 | |||||
_BV(7), // D6 - PD7 | |||||
_BV(6), // D7 - PE6 | |||||
_BV(4), // D8 - PB4 | |||||
_BV(5), // D9 - PB5 | |||||
_BV(6), // D10 - PB6 | |||||
_BV(7), // D11 - PB7 | |||||
_BV(6), // D12 - PD6 | |||||
_BV(7), // D13 - PC7 | |||||
_BV(3), // D14 - MISO - PB3 | |||||
_BV(1), // D15 - SCK - PB1 | |||||
_BV(2), // D16 - MOSI - PB2 | |||||
_BV(0), // D17 - SS - PB0 | |||||
_BV(7), // D18 - A0 - PF7 | |||||
_BV(6), // D19 - A1 - PF6 | |||||
_BV(5), // D20 - A2 - PF5 | |||||
_BV(4), // D21 - A3 - PF4 | |||||
_BV(1), // D22 - A4 - PF1 | |||||
_BV(0), // D23 - A5 - PF0 | |||||
_BV(5), // D24 - PD5 | |||||
_BV(7), // D25 / D6 - A7 - PD7 | |||||
_BV(4), // D26 / D8 - A8 - PB4 | |||||
_BV(5), // D27 / D9 - A9 - PB5 | |||||
_BV(6), // D28 / D10 - A10 - PB6 | |||||
_BV(6), // D29 / D12 - A11 - PD6 | |||||
}; | |||||
const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
TIMER0B, /* 3 */ | |||||
NOT_ON_TIMER, | |||||
TIMER3A, /* 5 */ | |||||
TIMER4D, /* 6 */ | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
TIMER1A, /* 9 */ | |||||
TIMER1B, /* 10 */ | |||||
TIMER0A, /* 11 */ | |||||
NOT_ON_TIMER, | |||||
TIMER4A, /* 13 */ | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
NOT_ON_TIMER, | |||||
}; | |||||
const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { | |||||
7, // A0 PF7 ADC7 | |||||
6, // A1 PF6 ADC6 | |||||
5, // A2 PF5 ADC5 | |||||
4, // A3 PF4 ADC4 | |||||
1, // A4 PF1 ADC1 | |||||
0, // A5 PF0 ADC0 | |||||
8, // A6 D4 PD4 ADC8 | |||||
10, // A7 D6 PD7 ADC10 | |||||
11, // A8 D8 PB4 ADC11 | |||||
12, // A9 D9 PB5 ADC12 | |||||
13, // A10 D10 PB6 ADC13 | |||||
9 // A11 D12 PD6 ADC9 | |||||
}; | |||||
#endif /* ARDUINO_MAIN */ | |||||
// These serial port names are intended to allow libraries and architecture-neutral | |||||
// sketches to automatically default to the correct port name for a particular type | |||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, | |||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use. | |||||
// | |||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor | |||||
// | |||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial | |||||
// | |||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library | |||||
// | |||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. | |||||
// | |||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX | |||||
// pins are NOT connected to anything by default. | |||||
#define SERIAL_PORT_MONITOR Serial | |||||
#define SERIAL_PORT_USBVIRTUAL Serial | |||||
#define SERIAL_PORT_HARDWARE Serial1 | |||||
#define SERIAL_PORT_HARDWARE_OPEN Serial1 | |||||
#endif /* Pins_Arduino_h */ |
@ -0,0 +1,15 @@ | |||||
ECO | |||||
=== | |||||
![MimiDox](http://i.imgur.com/iWb3yO0.jpg) | |||||
A compact version of the ErgoDox | |||||
Keyboard Maintainer: That-Canadian | |||||
Hardware Supported: MiniDox PCB rev1 Pro Micro | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make minidox-rev1-default | |||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,3 @@ | |||||
ifndef MAKEFILE_INCLUDED | |||||
include ../../Makefile | |||||
endif |
@ -0,0 +1,38 @@ | |||||
/* | |||||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef REV1_CONFIG_H | |||||
#define REV1_CONFIG_H | |||||
#include "../config.h" | |||||
#define DEVICE_VER 0x0001 | |||||
// wiring of each half | |||||
#define MATRIX_ROW_PINS { B2, B6, B4, B5 } | |||||
#define MATRIX_COL_PINS { F4, D3, D2, D1, D4 } | |||||
#define CATERINA_BOOTLOADER | |||||
#define USE_SERIAL | |||||
// #define EE_HANDS | |||||
#define I2C_MASTER_LEFT | |||||
//#define I2C_MASTER_RIGHT | |||||
#endif |
@ -0,0 +1 @@ | |||||
#include "minidox.h" |
@ -0,0 +1,28 @@ | |||||
#ifndef REV1_H | |||||
#define REV1_H | |||||
#include "../minidox.h" | |||||
//void promicro_bootloader_jmp(bool program); | |||||
#include "quantum.h" | |||||
//void promicro_bootloader_jmp(bool program); | |||||
#define KEYMAP( \ | |||||
k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, \ | |||||
k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, \ | |||||
k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, \ | |||||
k33, k34, k35, k75, k74, k73 \ | |||||
) \ | |||||
{ \ | |||||
{ k01, k02, k03, k04, k05 }, \ | |||||
{ k11, k12, k13, k14, k15 }, \ | |||||
{ k21, k22, k23, k24, k25 }, \ | |||||
{ KC_NO, KC_NO, k33, k34, k35 }, \ | |||||
{ k41, k42, k43, k44, k45 }, \ | |||||
{ k51, k52, k53, k54, k55 }, \ | |||||
{ k61, k62, k63, k64, k65 }, \ | |||||
{ KC_NO, KC_NO, k73, k74, k75 } \ | |||||
} | |||||
#endif |
@ -0,0 +1,5 @@ | |||||
BACKLIGHT_ENABLE = no | |||||
ifndef QUANTUM_DIR | |||||
include ../../../Makefile | |||||
endif |
@ -0,0 +1,74 @@ | |||||
SRC += matrix.c \ | |||||
i2c.c \ | |||||
split_util.c \ | |||||
serial.c | |||||
# MCU name | |||||
#MCU = at90usb1287 | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Boot Section Size in *bytes* | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# change to "no" to disable the options, or define them in the Makefile in | |||||
# the appropriate keymap folder that will get included automatically | |||||
# | |||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) | |||||
CONSOLE_ENABLE ?= no # Console for debug(+400) | |||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality | |||||
MIDI_ENABLE ?= no # MIDI controls | |||||
AUDIO_ENABLE ?= no # Audio output on port C6 | |||||
UNICODE_ENABLE ?= no # Unicode | |||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||||
USE_I2C ?= no | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend | |||||
CUSTOM_MATRIX = yes |
@ -0,0 +1,228 @@ | |||||
/* | |||||
* WARNING: be careful changing this code, it is very timing dependent | |||||
*/ | |||||
#ifndef F_CPU | |||||
#define F_CPU 16000000 | |||||
#endif | |||||
#include <avr/io.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include <stdbool.h> | |||||
#include "serial.h" | |||||
#ifdef USE_SERIAL | |||||
// Serial pulse period in microseconds. Its probably a bad idea to lower this | |||||
// value. | |||||
#define SERIAL_DELAY 24 | |||||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; | |||||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; | |||||
#define SLAVE_DATA_CORRUPT (1<<0) | |||||
volatile uint8_t status = 0; | |||||
inline static | |||||
void serial_delay(void) { | |||||
_delay_us(SERIAL_DELAY); | |||||
} | |||||
inline static | |||||
void serial_output(void) { | |||||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK; | |||||
} | |||||
// make the serial pin an input with pull-up resistor | |||||
inline static | |||||
void serial_input(void) { | |||||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; | |||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; | |||||
} | |||||
inline static | |||||
uint8_t serial_read_pin(void) { | |||||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); | |||||
} | |||||
inline static | |||||
void serial_low(void) { | |||||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; | |||||
} | |||||
inline static | |||||
void serial_high(void) { | |||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; | |||||
} | |||||
void serial_master_init(void) { | |||||
serial_output(); | |||||
serial_high(); | |||||
} | |||||
void serial_slave_init(void) { | |||||
serial_input(); | |||||
// Enable INT0 | |||||
EIMSK |= _BV(INT0); | |||||
// Trigger on falling edge of INT0 | |||||
EICRA &= ~(_BV(ISC00) | _BV(ISC01)); | |||||
} | |||||
// Used by the master to synchronize timing with the slave. | |||||
static | |||||
void sync_recv(void) { | |||||
serial_input(); | |||||
// This shouldn't hang if the slave disconnects because the | |||||
// serial line will float to high if the slave does disconnect. | |||||
while (!serial_read_pin()); | |||||
serial_delay(); | |||||
} | |||||
// Used by the slave to send a synchronization signal to the master. | |||||
static | |||||
void sync_send(void) { | |||||
serial_output(); | |||||
serial_low(); | |||||
serial_delay(); | |||||
serial_high(); | |||||
} | |||||
// Reads a byte from the serial line | |||||
static | |||||
uint8_t serial_read_byte(void) { | |||||
uint8_t byte = 0; | |||||
serial_input(); | |||||
for ( uint8_t i = 0; i < 8; ++i) { | |||||
byte = (byte << 1) | serial_read_pin(); | |||||
serial_delay(); | |||||
_delay_us(1); | |||||
} | |||||
return byte; | |||||
} | |||||
// Sends a byte with MSB ordering | |||||
static | |||||
void serial_write_byte(uint8_t data) { | |||||
uint8_t b = 8; | |||||
serial_output(); | |||||
while( b-- ) { | |||||
if(data & (1 << b)) { | |||||
serial_high(); | |||||
} else { | |||||
serial_low(); | |||||
} | |||||
serial_delay(); | |||||
} | |||||
} | |||||
// interrupt handle to be used by the slave device | |||||
ISR(SERIAL_PIN_INTERRUPT) { | |||||
sync_send(); | |||||
uint8_t checksum = 0; | |||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { | |||||
serial_write_byte(serial_slave_buffer[i]); | |||||
sync_send(); | |||||
checksum += serial_slave_buffer[i]; | |||||
} | |||||
serial_write_byte(checksum); | |||||
sync_send(); | |||||
// wait for the sync to finish sending | |||||
serial_delay(); | |||||
// read the middle of pulses | |||||
_delay_us(SERIAL_DELAY/2); | |||||
uint8_t checksum_computed = 0; | |||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { | |||||
serial_master_buffer[i] = serial_read_byte(); | |||||
sync_send(); | |||||
checksum_computed += serial_master_buffer[i]; | |||||
} | |||||
uint8_t checksum_received = serial_read_byte(); | |||||
sync_send(); | |||||
serial_input(); // end transaction | |||||
if ( checksum_computed != checksum_received ) { | |||||
status |= SLAVE_DATA_CORRUPT; | |||||
} else { | |||||
status &= ~SLAVE_DATA_CORRUPT; | |||||
} | |||||
} | |||||
inline | |||||
bool serial_slave_DATA_CORRUPT(void) { | |||||
return status & SLAVE_DATA_CORRUPT; | |||||
} | |||||
// Copies the serial_slave_buffer to the master and sends the | |||||
// serial_master_buffer to the slave. | |||||
// | |||||
// Returns: | |||||
// 0 => no error | |||||
// 1 => slave did not respond | |||||
int serial_update_buffers(void) { | |||||
// this code is very time dependent, so we need to disable interrupts | |||||
cli(); | |||||
// signal to the slave that we want to start a transaction | |||||
serial_output(); | |||||
serial_low(); | |||||
_delay_us(1); | |||||
// wait for the slaves response | |||||
serial_input(); | |||||
serial_high(); | |||||
_delay_us(SERIAL_DELAY); | |||||
// check if the slave is present | |||||
if (serial_read_pin()) { | |||||
// slave failed to pull the line low, assume not present | |||||
sei(); | |||||
return 1; | |||||
} | |||||
// if the slave is present syncronize with it | |||||
sync_recv(); | |||||
uint8_t checksum_computed = 0; | |||||
// receive data from the slave | |||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { | |||||
serial_slave_buffer[i] = serial_read_byte(); | |||||
sync_recv(); | |||||
checksum_computed += serial_slave_buffer[i]; | |||||
} | |||||
uint8_t checksum_received = serial_read_byte(); | |||||
sync_recv(); | |||||
if (checksum_computed != checksum_received) { | |||||
sei(); | |||||
return 1; | |||||
} | |||||
uint8_t checksum = 0; | |||||
// send data to the slave | |||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { | |||||
serial_write_byte(serial_master_buffer[i]); | |||||
sync_recv(); | |||||
checksum += serial_master_buffer[i]; | |||||
} | |||||
serial_write_byte(checksum); | |||||
sync_recv(); | |||||
// always, release the line when not in use | |||||
serial_output(); | |||||
serial_high(); | |||||
sei(); | |||||
return 0; | |||||
} | |||||
#endif |
@ -0,0 +1,26 @@ | |||||
#ifndef MY_SERIAL_H | |||||
#define MY_SERIAL_H | |||||
#include "config.h" | |||||
#include <stdbool.h> | |||||
/* TODO: some defines for interrupt setup */ | |||||
#define SERIAL_PIN_DDR DDRD | |||||
#define SERIAL_PIN_PORT PORTD | |||||
#define SERIAL_PIN_INPUT PIND | |||||
#define SERIAL_PIN_MASK _BV(PD0) | |||||
#define SERIAL_PIN_INTERRUPT INT0_vect | |||||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 | |||||
#define SERIAL_MASTER_BUFFER_LENGTH 1 | |||||
// Buffers for master - slave communication | |||||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; | |||||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; | |||||
void serial_master_init(void); | |||||
void serial_slave_init(void); | |||||
int serial_update_buffers(void); | |||||
bool serial_slave_data_corrupt(void); | |||||
#endif |
@ -0,0 +1,80 @@ | |||||
#include <avr/io.h> | |||||
#include <avr/wdt.h> | |||||
#include <avr/power.h> | |||||
#include <avr/interrupt.h> | |||||
#include <util/delay.h> | |||||
#include <avr/eeprom.h> | |||||
#include "split_util.h" | |||||
#include "matrix.h" | |||||
#include "keyboard.h" | |||||
#include "config.h" | |||||
#ifdef USE_I2C | |||||
# include "i2c.h" | |||||
#else | |||||
# include "serial.h" | |||||
#endif | |||||
volatile bool isLeftHand = true; | |||||
static void setup_handedness(void) { | |||||
#ifdef EE_HANDS | |||||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); | |||||
#else | |||||
#ifdef I2C_MASTER_RIGHT | |||||
isLeftHand = !has_usb(); | |||||
#else | |||||
isLeftHand = has_usb(); | |||||
#endif | |||||
#endif | |||||
} | |||||
static void keyboard_master_setup(void) { | |||||
#ifdef USE_I2C | |||||
i2c_master_init(); | |||||
#else | |||||
serial_master_init(); | |||||
#endif | |||||
} | |||||
static void keyboard_slave_setup(void) { | |||||
#ifdef USE_I2C | |||||
i2c_slave_init(SLAVE_I2C_ADDRESS); | |||||
#else | |||||
serial_slave_init(); | |||||
#endif | |||||
} | |||||
bool has_usb(void) { | |||||
USBCON |= (1 << OTGPADE); //enables VBUS pad | |||||
_delay_us(5); | |||||
return (USBSTA & (1<<VBUS)); //checks state of VBUS | |||||
} | |||||
void split_keyboard_setup(void) { | |||||
setup_handedness(); | |||||
if (has_usb()) { | |||||
keyboard_master_setup(); | |||||
} else { | |||||
keyboard_slave_setup(); | |||||
} | |||||
sei(); | |||||
} | |||||
void keyboard_slave_loop(void) { | |||||
matrix_init(); | |||||
while (1) { | |||||
matrix_slave_scan(); | |||||
} | |||||
} | |||||
// this code runs before the usb and keyboard is initialized | |||||
void matrix_setup(void) { | |||||
split_keyboard_setup(); | |||||
if (!has_usb()) { | |||||
keyboard_slave_loop(); | |||||
} | |||||
} |
@ -0,0 +1,22 @@ | |||||
#ifndef SPLIT_KEYBOARD_UTIL_H | |||||
#define SPLIT_KEYBOARD_UTIL_H | |||||
#include <stdbool.h> | |||||
#ifdef EE_HANDS | |||||
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10 | |||||
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END | |||||
#endif | |||||
#define SLAVE_I2C_ADDRESS 0x32 | |||||
extern volatile bool isLeftHand; | |||||
// slave version of matix scan, defined in matrix.c | |||||
void matrix_slave_scan(void); | |||||
void split_keyboard_setup(void); | |||||
bool has_usb(void); | |||||
void keyboard_slave_loop(void); | |||||
#endif |