* Initial commit for Comet46 firmware * Update Comet46 README * Add readme to satt keymap of comet46 * Add default keymap for Comet46 * Fix broken link in readme * Delete redundant includes * Modify default keymap & fix LAYOUT macro * Modify satt keymap of Comet46pull/3357/head
@ -0,0 +1,30 @@ | |||
#include "comet46.h" | |||
void uart_init(void) { | |||
SERIAL_UART_INIT(); | |||
} | |||
void led_init(void) { | |||
DDRD |= (1<<1); | |||
PORTD |= (1<<1); | |||
DDRF |= (1<<4) | (1<<5); | |||
PORTF |= (1<<4) | (1<<5); | |||
} | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
uart_init(); | |||
led_init(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
} |
@ -0,0 +1,79 @@ | |||
#ifndef COMET46_H | |||
#define COMET46_H | |||
#include "quantum.h" | |||
#include "matrix.h" | |||
#include "backlight.h" | |||
#include <stddef.h> | |||
#define red_led_off PORTF |= (1<<5) | |||
#define red_led_on PORTF &= ~(1<<5) | |||
#define blu_led_off PORTF |= (1<<4) | |||
#define blu_led_on PORTF &= ~(1<<4) | |||
#define grn_led_off PORTD |= (1<<1) | |||
#define grn_led_on PORTD &= ~(1<<1) | |||
#define set_led_off red_led_off; grn_led_off; blu_led_off | |||
#define set_led_red red_led_on; grn_led_off; blu_led_off | |||
#define set_led_blue red_led_off; grn_led_off; blu_led_on | |||
#define set_led_green red_led_off; grn_led_on; blu_led_off | |||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off | |||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on | |||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on | |||
#define set_led_white red_led_on; grn_led_on; blu_led_on | |||
/* | |||
#define LED_B 5 | |||
#define LED_R 6 | |||
#define LED_G 7 | |||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) | |||
#define red_led_on PORTF |= (1<<LED_R) | |||
#define red_led_off PORTF &= ~(1<<LED_R) | |||
#define grn_led_on PORTF |= (1<<LED_G) | |||
#define grn_led_off PORTF &= ~(1<<LED_G) | |||
#define blu_led_on PORTF |= (1<<LED_B) | |||
#define blu_led_off PORTF &= ~(1<<LED_B) | |||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) | |||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R) | |||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B) | |||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G) | |||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G) | |||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B) | |||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) | |||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) | |||
*/ | |||
// This a shortcut to help you visually see your layout. | |||
// The first section contains all of the arguements | |||
// The second converts the arguments into a two-dimensional array | |||
#define LAYOUT_kc( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11,\ | |||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25,\ | |||
k26, k27, k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42,\ | |||
k43, k44, k45, k46, k47, k48 \ | |||
) \ | |||
{ \ | |||
{ KC_##k13, KC_##k01, KC_##k26, KC_##k12, KC_##k00, KC_##k11, KC_##k25, KC_##k42, KC_##k10, KC_##k24}, \ | |||
{ KC_##k03, KC_##k28, KC_##k14, KC_##k02, KC_##k27, KC_##k41, KC_##k09, KC_##k23, KC_##k38, KC_##k08}, \ | |||
{ KC_##k31, KC_##k16, KC_##k04, KC_##k29, KC_##k15, KC_##k22, KC_##k37, KC_##k07, KC_##k21, KC_##k36}, \ | |||
{ KC_NO, KC_##k32, KC_##k17, KC_##k05, KC_##k43, KC_##k48, KC_##k06, KC_##k20, KC_##k35, KC_NO }, \ | |||
{ KC_NO, KC_##k45, KC_##k33, KC_##k18, KC_##k44, KC_##k47, KC_##k19, KC_##k34, KC_##k46, KC_NO }, \ | |||
} | |||
#define LAYOUT( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11,\ | |||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25,\ | |||
k26, k27, k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42,\ | |||
k43, k44, k45, k46, k47, k48 \ | |||
) \ | |||
{ \ | |||
{ k13, k01, k26, k12, k00, k11, k25, k42, k10, k24}, \ | |||
{ k03, k28, k14, k02, k27, k41, k09, k23, k38, k08}, \ | |||
{ k31, k16, k04, k29, k15, k22, k37, k07, k21, k36}, \ | |||
{ KC_NO, k32, k17, k05, k43, k48, k06, k20, k35, KC_NO }, \ | |||
{ KC_NO, k45, k33, k18, k44, k47, k19, k34, k46, KC_NO }, \ | |||
} | |||
#endif |
@ -0,0 +1,87 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER SatT | |||
#define PRODUCT Comet46 | |||
#define DESCRIPTION qmk keyboard firmware for Comet46 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 10 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
//#define BACKLIGHT_LEVELS 3 | |||
#define ONESHOT_TIMEOUT 500 | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
#define PREVENT_STUCK_MODIFIERS | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
//UART settings for communication with the RF microcontroller | |||
#define SERIAL_UART_BAUD 1000000 | |||
#define SERIAL_UART_DATA UDR1 | |||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) | |||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) | |||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) | |||
#define SERIAL_UART_INIT() do { \ | |||
/* baud rate */ \ | |||
UBRR1L = SERIAL_UART_UBRR; \ | |||
/* baud rate */ \ | |||
UBRR1H = SERIAL_UART_UBRR >> 8; \ | |||
/* enable TX and RX */ \ | |||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ | |||
/* 8-bit data */ \ | |||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ | |||
} while(0) | |||
#endif |
@ -0,0 +1,103 @@ | |||
// this is the style you want to emulate. | |||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, | |||
#include QMK_KEYBOARD_H | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
enum comet46_layers | |||
{ | |||
_QWERTY, | |||
_LOWER, | |||
_RAISE, | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
LOWER, | |||
RAISE, | |||
}; | |||
// Fillers to make layering more clear | |||
#define _______ KC_TRNS | |||
#define XXXXXXX KC_NO | |||
#define LOWER MO(_LOWER) | |||
#define RAISE MO(_RAISE) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Qwerty | |||
* ,-----------------------------------------+ +-----------------------------------------. | |||
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| | |||
* | Ctl | A | S | D | F | G | Esc | | Del | H | J | K | L | ; | " | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| | |||
* | Shift| Z | X | C | V | B | { | | } | N | M | , | . | / | Shift| | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| | |||
* | GUI | Lower| Space| | Enter| Raise| Alt | | |||
* +--------------------/ \--------------------+ | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_ESC, KC_DEL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_LALT | |||
), | |||
/* Lower | |||
* ,-----------------------------------------+ +-----------------------------------------. | |||
* | | ! | @ | # | $ | % | | ^ | & | * | ( | ) | | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| | |||
* | | | | | | | | | ` | \ | - | = | [ | ] | | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| | |||
* | | | | | | | | | ~ | | | _ | + | { | } | | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| | |||
* | | | | | | | | | |||
* +--------------------/ \--------------------+ | |||
*/ | |||
[_LOWER] = LAYOUT( | |||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, | |||
_______, _______, _______, _______, _______, _______, _______, KC_GRV, KC_BSLS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, | |||
_______, _______, _______, _______, _______, _______, _______, KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, | |||
_______, _______, _______, _______, _______, _______ | |||
), | |||
/* Raise | |||
* ,-----------------------------------------+ +-----------------------------------------. | |||
* | | 1 | 2 | 3 | 4 | 5 | | | | | | | | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| | |||
* | | F1 | F2 | F3 | F4 | F5 | F6 | | | Left | Down | Up |Right | End | | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+------+------| | |||
* | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | | | | | | | | |||
* |------+------+------+------+------+------+------+ +------+------+------+------+------+-------------| | |||
* | | | | | | | | | |||
* +--------------------/ \--------------------+ | |||
*/ | |||
[_RAISE] = LAYOUT( | |||
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, _______, | |||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, | |||
_______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
void matrix_scan_user(void) { | |||
uint8_t layer = biton32(layer_state); | |||
switch (layer) { | |||
case _QWERTY: | |||
set_led_green; | |||
break; | |||
case _RAISE: | |||
set_led_blue; | |||
break; | |||
case _LOWER: | |||
set_led_red; | |||
break; | |||
default: | |||
set_led_green; | |||
break; | |||
} | |||
} |
@ -0,0 +1,142 @@ | |||
#include "quantum.h" | |||
#include "action_pseudo_lut.h" | |||
static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE]; | |||
/* | |||
* Pseudo layout action. | |||
* This action converts a keycode in order to output the character according to the keymap you specified | |||
* still your keyboard layout recognized wrongly on your OS. | |||
* Memo: Using other layer keymap to get keycode | |||
*/ | |||
void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) { | |||
uint8_t prev_shift; | |||
uint16_t keycode; | |||
uint16_t pseudo_keycode; | |||
/* get keycode from keymap you specified */ | |||
keycode = keymap_key_to_keycode(base_keymap_id, record->event.key); | |||
prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)); | |||
if (record->event.pressed) { | |||
/* when magic commands entered, keycode does not converted */ | |||
if (IS_COMMAND()) { | |||
if (prev_shift) { | |||
add_shift_bit(keycode); | |||
} | |||
register_code(keycode); | |||
return; | |||
} | |||
if (prev_shift) { | |||
pseudo_keycode = convert_keycode(keymap, keycode, true); | |||
dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); | |||
add_shift_bit(keycode); | |||
if (IS_LSFT(pseudo_keycode)) { | |||
register_code(QK_LSFT ^ pseudo_keycode); | |||
} else { | |||
/* delete shift mod temporarily */ | |||
del_mods(prev_shift); | |||
send_keyboard_report(); | |||
register_code(pseudo_keycode); | |||
add_mods(prev_shift); | |||
send_keyboard_report(); | |||
} | |||
} else { | |||
pseudo_keycode = convert_keycode(keymap, keycode, false); | |||
dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode); | |||
if (IS_LSFT(pseudo_keycode)) { | |||
add_weak_mods(MOD_BIT(KC_LSFT)); | |||
send_keyboard_report(); | |||
register_code(QK_LSFT ^ pseudo_keycode); | |||
/* on Windows, prevent key repeat to avoid unintended output */ | |||
unregister_code(QK_LSFT ^ pseudo_keycode); | |||
del_weak_mods(MOD_BIT(KC_LSFT)); | |||
send_keyboard_report(); | |||
} else { | |||
register_code(pseudo_keycode); | |||
} | |||
} | |||
} else { | |||
if (get_shift_bit(keycode)) { | |||
del_shift_bit(keycode); | |||
pseudo_keycode = convert_keycode(keymap, keycode, true); | |||
} else { | |||
pseudo_keycode = convert_keycode(keymap, keycode, false); | |||
} | |||
dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode); | |||
if (IS_LSFT(pseudo_keycode)) { | |||
unregister_code(QK_LSFT ^ pseudo_keycode); | |||
} else { | |||
unregister_code(pseudo_keycode); | |||
} | |||
} | |||
} | |||
uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded) | |||
{ | |||
uint16_t pseudo_keycode; | |||
switch (keycode) { | |||
case KC_A ... KC_CAPSLOCK: | |||
#if defined(__AVR__) | |||
if (shift_modded) { | |||
pseudo_keycode = pgm_read_word(&keymap[keycode][1]); | |||
} else { | |||
pseudo_keycode = pgm_read_word(&keymap[keycode][0]); | |||
} | |||
#else | |||
if (shift_modded) { | |||
pseudo_keycode = keymap[keycode][1]; | |||
} else { | |||
pseudo_keycode = keymap[keycode][0]; | |||
} | |||
#endif | |||
/* if undefined, use got keycode as it is */ | |||
if (pseudo_keycode == 0x00) { | |||
if (shift_modded) { | |||
pseudo_keycode = S(keycode); | |||
} else { | |||
pseudo_keycode = keycode; | |||
} | |||
} | |||
break; | |||
default: | |||
if (shift_modded) { | |||
pseudo_keycode = S(keycode); | |||
} else { | |||
pseudo_keycode = keycode; | |||
} | |||
break; | |||
} | |||
return pseudo_keycode; | |||
} | |||
uint8_t get_shift_bit(uint16_t keycode) { | |||
if ((keycode >> 3) < SHIFT_BIT_SIZE) { | |||
return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7)); | |||
} else { | |||
dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode); | |||
return 0; | |||
} | |||
} | |||
void add_shift_bit(uint16_t keycode) { | |||
if ((keycode >> 3) < SHIFT_BIT_SIZE) { | |||
send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7)); | |||
} else { | |||
dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode); | |||
} | |||
} | |||
void del_shift_bit(uint16_t keycode) { | |||
if ((keycode >> 3) < SHIFT_BIT_SIZE) { | |||
send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7)); | |||
} else { | |||
dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode); | |||
} | |||
} |
@ -0,0 +1,15 @@ | |||
#ifndef ACTION_PSEUDO_LUT_H | |||
#define ACTION_PSEUDO_LUT_H | |||
#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key | |||
#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT) | |||
void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]); | |||
uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool); | |||
uint8_t get_shift_bit(uint16_t); | |||
void add_shift_bit(uint16_t); | |||
void del_shift_bit(uint16_t); | |||
#endif |
@ -0,0 +1,220 @@ | |||
// this is the style you want to emulate. | |||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard, | |||
#include QMK_KEYBOARD_H | |||
#include "keymap_jis2us.h" | |||
#include "action_pseudo_lut.h" | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
enum comet46_layers { | |||
_QWERTY, | |||
_LOWER, | |||
_RAISE, | |||
_PSEUDO_US, | |||
_PSEUDO_US_LOWER, | |||
_PSEUDO_US_RAISE, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
PSEUDO_US, | |||
}; | |||
#define KC_LWR MO(_LOWER) | |||
#define KC_RSE MO(_RAISE) | |||
#define KC_P_LW MO(_PSEUDO_US_LOWER) | |||
#define KC_P_RS MO(_PSEUDO_US_RAISE) | |||
#define KC_QWRT QWERTY | |||
#define KC_P_US PSEUDO_US | |||
#define KC_SPCT CTL_T(KC_SPC) | |||
#define KC_ENSF SFT_T(KC_ENT) | |||
#define KC_SFTA SFT_T(KC_A) | |||
#define KC_CTSF S(KC_LCTL) | |||
#define KC_IMON ALT_T(KC_F13) | |||
#define KC_IMOF GUI_T(KC_F14) | |||
#define KC_SRO S(KC_RO) | |||
#define KC_SYEN S(KC_JYEN) | |||
#define KC_CAD LCA(KC_DEL) | |||
#define KC_RST RESET | |||
#define LONGPRESS_DELAY 150 | |||
// Fillers to make layering more clear | |||
#define KC_ KC_TRNS | |||
#define KC_XXXX KC_NO | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_QWERTY] = LAYOUT_kc( | |||
//,----+----+----+----+----+----+ +----+----+----+----+----+----. | |||
ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL , | |||
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| | |||
TAB ,SFTA, S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,BSPC, | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
CTSF, Z , X , C , V , B ,LBRC, RBRC, N , M ,COMM,DOT ,SLSH,QUOT, | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
IMOF,LWR ,SPCT, ENSF,RSE ,IMON | |||
// +----+----+---/ \---+----+----+ | |||
), | |||
[_LOWER] = LAYOUT_kc( | |||
//,----+----+----+----+----+----+ +----+----+----+----+----+----. | |||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , | |||
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| | |||
, F1 , F2 , F3 , F4 , F5 , F6 , GRV ,BSLS,MINS,EQL ,LBRC,RBRC, , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, F7 , F8 , F9 , F10, F11, F12, TILD,PIPE,UNDS,PLUS,LCBR,RCBR, , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , | |||
// +----+----+---/ \---+----+----+ | |||
), | |||
[_RAISE] = LAYOUT_kc( | |||
//,----+----+----+----+----+----+ +----+----+----+----+----+----. | |||
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , | |||
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| | |||
, , , , , , , XXXX,LEFT,DOWN, UP ,RGHT,END , , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , | |||
// +----+----+---/ \---+----+----+ | |||
), | |||
[_PSEUDO_US] = LAYOUT_kc( | |||
//,----+----+----+----+----+----+ +----+----+----+----+----+----. | |||
ESC , Q , W , E , R , T , Y , U , I , O , P ,DEL , | |||
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| | |||
TAB ,SFTA, S , D , F , G ,ASTR, LPRN, H , J , K , L ,FN0 ,BSPC, | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
CTSF, Z , X , C , V , B ,FN0 , FN0 , N , M ,COMM,DOT ,SLSH,FN0 , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
IMOF,P_LW,SPCT, ENSF,P_RS,IMON | |||
// +----+----+---/ \---+----+----+ | |||
), | |||
[_PSEUDO_US_LOWER] = LAYOUT_kc( | |||
//,----+----+----+----+----+----+ +----+----+----+----+----+----. | |||
,EXLM,LBRC,HASH,DLR ,PERC, EQL ,CIRC, DQT,ASTR,LPRN, , | |||
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| | |||
, F1 , F2 , F3 , F4 , F5 , F6 , LCBR,JYEN,MINS,UNDS,RBRC,BSLS, , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, F7 , F8 , F9 , F10, F11, F12, PLUS,SYEN,SRO ,COLN,RCBR,PIPE, , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , | |||
// +----+----+---/ \---+----+----+ | |||
), | |||
[_PSEUDO_US_RAISE] = LAYOUT_kc( | |||
//,----+----+----+----+----+----+ +----+----+----+----+----+----. | |||
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , | |||
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| | |||
, , , , , , GRV, XXXX,LEFT,DOWN, UP ,RGHT,END , , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , , , HOME,XXXX,XXXX,XXXX,XXXX,XXXX, , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , | |||
// +----+----+---/ \---+----+----+ | |||
), | |||
[_ADJUST] = LAYOUT_kc( | |||
//,----+----+----+----+----+----+ +----+----+----+----+----+----. | |||
, , , , , , , , , , , , | |||
//|----+----+----+----+----+----+----+ +----+----+----+----+----+----+----| | |||
, , , , , ,CAD , QWRT, , , , , , , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , ,RST , P_US, , , , , , , | |||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| | |||
, , , , , | |||
// +----+----+---/ \---+----+----+ | |||
) | |||
}; | |||
/* | |||
* user defined action function | |||
*/ | |||
enum function_id { | |||
PSEUDO_US_FUNCTION, | |||
}; | |||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { | |||
switch (id) | |||
{ | |||
case PSEUDO_US_FUNCTION: | |||
action_pseudo_lut(record, _QWERTY, keymap_jis2us); | |||
break; | |||
} | |||
} | |||
/* | |||
* Fn action definition | |||
*/ | |||
const uint16_t PROGMEM fn_actions[] = { | |||
[0] = ACTION_FUNCTION(PSEUDO_US_FUNCTION), | |||
}; | |||
void matrix_scan_user(void) { | |||
uint8_t layer = biton32(layer_state); | |||
switch (layer) { | |||
case _LOWER: | |||
set_led_red; | |||
break; | |||
case _RAISE: | |||
set_led_blue; | |||
break; | |||
case _PSEUDO_US_LOWER: | |||
set_led_yellow; | |||
break; | |||
case _PSEUDO_US_RAISE: | |||
set_led_cyan; | |||
break; | |||
case _ADJUST: | |||
set_led_magenta; | |||
break; | |||
default: | |||
set_led_green; | |||
break; | |||
} | |||
}; | |||
uint32_t layer_state_set_user(uint32_t state) { | |||
switch (biton32(state)) { | |||
case _PSEUDO_US: | |||
return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); | |||
break; | |||
case _PSEUDO_US_LOWER: | |||
return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); | |||
break; | |||
case _PSEUDO_US_RAISE: | |||
return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST); | |||
break; | |||
default: | |||
return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); | |||
break; | |||
} | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
return false; | |||
break; | |||
case PSEUDO_US: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_PSEUDO_US); | |||
} | |||
return false; | |||
break; | |||
} | |||
return true; | |||
} |
@ -0,0 +1,32 @@ | |||
#ifndef KEYMAP_JIS2US_H | |||
#define KEYMAP_JIS2US_H | |||
/* keymap for convert from JIS to US */ | |||
const uint16_t PROGMEM keymap_jis2us[][2] = { | |||
[KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */ | |||
[KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */ | |||
[KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */ | |||
[KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */ | |||
[KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */ | |||
[KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */ | |||
[KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */ | |||
[KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */ | |||
[KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */ | |||
[KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */ | |||
[KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */ | |||
[KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */ | |||
[KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */ | |||
[KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */ | |||
[KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */ | |||
[KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */ | |||
[KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */ | |||
[KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */ | |||
[KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */ | |||
[KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */ | |||
[KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */ | |||
[KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */ | |||
[KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */ | |||
}; | |||
#endif |
@ -0,0 +1,6 @@ | |||
## Pseudo US Layout | |||
On a Japanese Windows environment, ANSI keyboards may be recognized wrongly as a JIS keyboard. | |||
By using this code, you can use your ANSI keyboard under a JIS keyboard environment without changing the settings and registry of your environment. | |||
Original code by [Shela](https://github.com/qmk/qmk_firmware/tree/master/keyboards/hhkb/keymaps/shela) |
@ -0,0 +1,26 @@ | |||
SRC += action_pseudo_lut.c | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
ONEHAND_ENABLE = no # Enable one-hand typing | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
ifndef QUANTUM_DIR | |||
include ../../../../Makefile | |||
endif |
@ -0,0 +1,154 @@ | |||
/* | |||
Copyright 2012 Jun Wako | |||
Copyright 2014 Jack Humbert | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#if defined(__AVR__) | |||
#include <avr/io.h> | |||
#endif | |||
#include "wait.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "matrix.h" | |||
#include "timer.h" | |||
#if (MATRIX_COLS <= 8) | |||
# define print_matrix_header() print("\nr/c 01234567\n") | |||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) | |||
# define matrix_bitpop(i) bitpop(matrix[i]) | |||
# define ROW_SHIFTER ((uint8_t)1) | |||
#elif (MATRIX_COLS <= 16) | |||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") | |||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) | |||
# define matrix_bitpop(i) bitpop16(matrix[i]) | |||
# define ROW_SHIFTER ((uint16_t)1) | |||
#elif (MATRIX_COLS <= 32) | |||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") | |||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) | |||
# define matrix_bitpop(i) bitpop32(matrix[i]) | |||
# define ROW_SHIFTER ((uint32_t)1) | |||
#endif | |||
/* matrix state(1:on, 0:off) */ | |||
static matrix_row_t matrix[MATRIX_ROWS]; | |||
__attribute__ ((weak)) | |||
void matrix_init_kb(void) { | |||
matrix_init_user(); | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_scan_kb(void) { | |||
matrix_scan_user(); | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_init_user(void) { | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_scan_user(void) { | |||
} | |||
inline | |||
uint8_t matrix_rows(void) { | |||
return MATRIX_ROWS; | |||
} | |||
inline | |||
uint8_t matrix_cols(void) { | |||
return MATRIX_COLS; | |||
} | |||
void matrix_init(void) { | |||
matrix_init_quantum(); | |||
} | |||
uint8_t matrix_scan(void) | |||
{ | |||
SERIAL_UART_INIT(); | |||
uint32_t timeout = 0; | |||
//the s character requests the RF slave to send the matrix | |||
SERIAL_UART_DATA = 's'; | |||
//trust the external keystates entirely, erase the last data | |||
uint8_t uart_data[11] = {0}; | |||
//there are 10 bytes corresponding to 10 columns, and an end byte | |||
for (uint8_t i = 0; i < 11; i++) { | |||
//wait for the serial data, timeout if it's been too long | |||
//this only happened in testing with a loose wire, but does no | |||
//harm to leave it in here | |||
while(!SERIAL_UART_RXD_PRESENT){ | |||
timeout++; | |||
if (timeout > 10000){ | |||
break; | |||
} | |||
} | |||
uart_data[i] = SERIAL_UART_DATA; | |||
} | |||
//check for the end packet, the key state bytes use the LSBs, so 0xE0 | |||
//will only show up here if the correct bytes were recieved | |||
if (uart_data[10] == 0xE0) | |||
{ | |||
//shifting and transferring the keystates to the QMK matrix variable | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; | |||
} | |||
} | |||
matrix_scan_quantum(); | |||
return 1; | |||
} | |||
inline | |||
bool matrix_is_on(uint8_t row, uint8_t col) | |||
{ | |||
return (matrix[row] & ((matrix_row_t)1<col)); | |||
} | |||
inline | |||
matrix_row_t matrix_get_row(uint8_t row) | |||
{ | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) | |||
{ | |||
print_matrix_header(); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
phex(row); print(": "); | |||
print_matrix_row(row); | |||
print("\n"); | |||
} | |||
} | |||
uint8_t matrix_key_count(void) | |||
{ | |||
uint8_t count = 0; | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
count += matrix_bitpop(i); | |||
} | |||
return count; | |||
} |
@ -0,0 +1,16 @@ | |||
# Comet46 | |||
![Comet46](https://user-images.githubusercontent.com/39004890/42418180-d5bb188c-82d5-11e8-99fa-65020ce5ac5d.jpg) | |||
A split wireless 40% column-staggered keyboard | |||
Keyboard Maintainer: [SatT](https://github.com/satt99) | |||
Hardware Supported: Comet46 PCB, atmega32u4, nRF51822 | |||
Hardware Availability: [Comet46 PCB, case, and receiver](https://github.com/satt99/comet46-hardware) | |||
Firmware for nordic MCUs: [SRC and precompiled](https://github.com/satt99/comet46-firmware) | |||
Make example for this keyboard (after setting up your build environment): | |||
make comet46:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,73 @@ | |||
OPT_DEFS += -DCOMET46_ORTHO_===PROMICRO | |||
COMET46_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ | |||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) | |||
# # project specific files | |||
SRC = matrix.c | |||
# MCU name | |||
#MCU = at90usb1287 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Bootloader | |||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||
# different sizes, comment this out, and the correct address will be loaded | |||
# automatically (+60). See bootloader.mk for all options. | |||
BOOTLOADER = caterina | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA | |||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
# MIDI_ENABLE = YES # MIDI controls | |||
UNICODE_ENABLE = YES # Unicode | |||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID | |||
USB = /dev/ttyACM0 |