Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com>pull/14401/head
@ -0,0 +1,149 @@ | |||
/* | |||
Copyright 2021 Kyle McCreery | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x6D77 // mw = "MechWild" | |||
#define PRODUCT_ID 0x1707 | |||
#define DEVICE_VER 0x0201 | |||
#define MANUFACTURER MechWild | |||
#define PRODUCT OrangeBoyErgo | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 7 | |||
#define MATRIX_COLS 10 | |||
#define EEPROM_I2C_24LC64 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { A8, B15, B14, B13, B12, A15, B3 } | |||
#define MATRIX_COL_PINS { B10, B1, B0, A7, A6, A5, A4, A3, A2, A1 } | |||
#define UNUSED_PINS | |||
/* encoder pins */ | |||
#define ENCODERS_PAD_A { B5 } | |||
#define ENCODERS_PAD_B { B4 } | |||
/* encoder resolution */ | |||
#define ENCODER_RESOLUTION 4 | |||
#define TAP_CODE_DELAY 10 | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* status light pins */ | |||
#define LED_NUM_LOCK_PIN B8 | |||
#define LED_CAPS_LOCK_PIN B9 | |||
/* RGB settings, uncomment this define to enable RGB */ | |||
//#define RGB_DI_PIN A0 | |||
#ifdef RGB_DI_PIN | |||
# define RGBLED_NUM 10 | |||
# define RGBLIGHT_HUE_STEP 8 | |||
# define RGBLIGHT_SAT_STEP 8 | |||
# define RGBLIGHT_VAL_STEP 8 | |||
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
# define RGBLIGHT_ANIMATIONS | |||
/*== or choose animations ==*/ | |||
//# define RGBLIGHT_EFFECT_BREATHING | |||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
//# define RGBLIGHT_EFFECT_SNAKE | |||
//# define RGBLIGHT_EFFECT_KNIGHT | |||
//# define RGBLIGHT_EFFECT_CHRISTMAS | |||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
//# define RGBLIGHT_EFFECT_RGB_TEST | |||
//# define RGBLIGHT_EFFECT_ALTERNATING | |||
/*== customize breathing effect ==*/ | |||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
/*==== use exp() and sin() ====*/ | |||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
#define BOOTMAGIC_LITE_ROW 5 | |||
#define BOOTMAGIC_LITE_COLUMN 4 |
@ -0,0 +1,22 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#define HAL_USE_I2C TRUE | |||
#include_next <halconf.h> | |||
@ -0,0 +1,22 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include_next <mcuconf.h> | |||
#undef STM32_I2C_USE_I2C1 | |||
#define STM32_I2C_USE_I2C1 TRUE |
@ -0,0 +1,5 @@ | |||
# MCU name | |||
MCU = STM32F401 | |||
# Bootloader selection | |||
BOOTLOADER = stm32-dfu |
@ -0,0 +1,22 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#define HAL_USE_I2C TRUE | |||
#include_next <halconf.h> | |||
@ -0,0 +1,23 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include_next <mcuconf.h> | |||
#undef STM32_I2C_USE_I2C1 | |||
#define STM32_I2C_USE_I2C1 TRUE | |||
@ -0,0 +1,5 @@ | |||
# MCU name | |||
MCU = STM32F411 | |||
# Bootloader selection | |||
BOOTLOADER = stm32-dfu |
@ -0,0 +1,86 @@ | |||
{ | |||
"keyboard_name": "MechWild OBE", | |||
"url": "mechwild.com", | |||
"maintainer": "Kyle McCreery", | |||
"width": 19.5, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"label": "k55", "x": 0.3, "y": 0}, | |||
{"label": "k54", "x": 1.72, "y": 0}, | |||
{"label": "k53", "x": 2.72, "y": 0}, | |||
{"label": "k52", "x": 4.00, "y": 0}, | |||
{"label": "k51", "x": 5, "y": 0}, | |||
{"label": "k50", "x": 6, "y": 0}, | |||
{"label": "k00", "x": 7, "y": 0}, | |||
{"label": "k01", "x": 8, "y": 0}, | |||
{"label": "k02", "x": 10.75, "y": 0}, | |||
{"label": "k03", "x": 11.75, "y": 0}, | |||
{"label": "k04", "x": 12.75, "y": 0}, | |||
{"label": "k05", "x": 13.75, "y": 0}, | |||
{"label": "k06", "x": 15, "y": 0}, | |||
{"label": "k07", "x": 16, "y": 0}, | |||
{"label": "k08", "x": 17, "y": 0}, | |||
{"label": "k09", "x": 18, "y": 0}, | |||
{"label": "k65", "x": 0.2, "y": 1}, | |||
{"label": "k59", "x": 1.47, "y": 1, "w": 1.5}, | |||
{"label": "k58", "x": 2.97, "y": 1}, | |||
{"label": "k57", "x": 4.50, "y": 1}, | |||
{"label": "k56", "x": 5.5, "y": 1}, | |||
{"label": "k10", "x": 6.5, "y": 1}, | |||
{"label": "k11", "x": 7.5, "y": 1}, | |||
{"label": "k12", "x": 10.25, "y": 1}, | |||
{"label": "k13", "x": 11.25, "y": 1}, | |||
{"label": "k14", "x": 12.25, "y": 1}, | |||
{"label": "k15", "x": 13.25, "y": 1}, | |||
{"label": "k16", "x": 14.75, "y": 1}, | |||
{"label": "k17", "x": 15.75, "y": 1}, | |||
{"label": "k18", "x": 16.75, "y": 1}, | |||
{"label": "k19", "x": 17.75, "y": 1, "w": 1.5}, | |||
{"label": "k64", "x": 0.1, "y": 2}, | |||
{"label": "k69", "x": 1.40, "y": 2, "w": 1.75}, | |||
{"label": "k68", "x": 3.12, "y": 2}, | |||
{"label": "k63", "x": 4.75, "y": 2}, | |||
{"label": "k20", "x": 5.75, "y": 2}, | |||
{"label": "k21", "x": 6.75, "y": 2}, | |||
{"label": "k22", "x": 7.75, "y": 2}, | |||
{"label": "k23", "x": 10.5, "y": 2}, | |||
{"label": "k24", "x": 11.5, "y": 2}, | |||
{"label": "k25", "x": 12.5, "y": 2}, | |||
{"label": "k26", "x": 13.5, "y": 2}, | |||
{"label": "k27", "x": 15.1, "y": 2}, | |||
{"label": "k28", "x": 16.1, "y": 2}, | |||
{"label": "k29", "x": 17.1, "y": 2, "w": 2.25}, | |||
{"label": "k62", "x": 1.22, "y": 3, "w": 2.25}, | |||
{"label": "k60", "x": 3.47, "y": 3}, | |||
{"label": "k67", "x": 5.25, "y": 3}, | |||
{"label": "k66", "x": 6.25, "y": 3}, | |||
{"label": "k30", "x": 7.25, "y": 3}, | |||
{"label": "k31", "x": 8.25, "y": 3}, | |||
{"label": "k32", "x": 10, "y": 3}, | |||
{"label": "k33", "x": 11, "y": 3}, | |||
{"label": "k34", "x": 12, "y": 3}, | |||
{"label": "k35", "x": 13, "y": 3}, | |||
{"label": "k36", "x": 14.75, "y": 3}, | |||
{"label": "k37", "x": 15.75, "y": 3}, | |||
{"label": "k38", "x": 16.75, "y": 3}, | |||
{"label": "k39", "x": 17.75, "y": 3, "w": 1.75}, | |||
{"label": "k61", "x": 1.25, "y": 4, "w": 1.25}, | |||
{"label": "k40", "x": 2.72, "y": 4, "w": 1.25}, | |||
{"label": "k41", "x": 5.25, "y": 4, "w": 1.25}, | |||
{"label": "k42", "x": 6.50, "y": 4, "w": 2.25}, | |||
{"label": "k43", "x": 8.75, "y": 4}, | |||
{"label": "k44", "x": 10, "y": 4, "w": 2.75}, | |||
{"label": "k45", "x": 12.75, "y": 4}, | |||
{"label": "k46", "x": 14.75, "y": 4}, | |||
{"label": "k47", "x": 15.75, "y": 4}, | |||
{"label": "k48", "x": 16.75, "y": 4}, | |||
{"label": "k49", "x": 17.75, "y": 4} | |||
] | |||
} | |||
} | |||
} | |||
@ -0,0 +1,43 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_FN1, | |||
_FN2, | |||
_FN3 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT( | |||
KC_MUTE, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_TRNS, KC_BSPC, | |||
KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_PGDN, MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, MO(2), KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_FN1] = LAYOUT( | |||
KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
}; |
@ -0,0 +1,57 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_FN1, | |||
_FN2, | |||
_FN3 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Base */ | |||
[_BASE] = LAYOUT( | |||
KC_MUTE, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_TRNS, KC_BSPC, | |||
KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_PGDN, MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, MO(2), KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_FN1] = LAYOUT( | |||
KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
[_FN2] = LAYOUT( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
), | |||
[_FN3] = LAYOUT( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
) | |||
}; |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
@ -0,0 +1,33 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "obe.h" | |||
#ifdef ENCODER_ENABLE | |||
bool encoder_update_kb(uint8_t index, bool clockwise) { | |||
if (!encoder_update_user(index, clockwise)) { return false; } | |||
switch (index) { | |||
case 0: | |||
if (clockwise) { | |||
tap_code(KC_VOLU); | |||
} else { | |||
tap_code(KC_VOLD); | |||
} | |||
break; | |||
} | |||
return true; | |||
} | |||
#endif |
@ -0,0 +1,43 @@ | |||
/* Copyright 2021 Kyle McCreery | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k55, k54, k53, k52, k51, k50, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ | |||
k65, k59, k58, k57, k56, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ | |||
k64, k69, k68, k63, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ | |||
k62, k60, k67, k66, k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, \ | |||
k61, k40, k41, k42, k43, k44, k45, k46, k47, k48, k49 \ | |||
) { \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 }, \ | |||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49 }, \ | |||
{ k50, k51, k52, k53, k54, k55, k56, k57, k58, k59 }, \ | |||
{ k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 } \ | |||
} |
@ -0,0 +1,19 @@ | |||
# OrangeBoyErgo (OBE) | |||
![obe](https://i.imgur.com/bzqi2XOh.png) | |||
An affordable Alice-like keyboard kit powered by the STM32 Blackpill. | |||
* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery) | |||
* Hardware Supported: OBE v2.1 | |||
* Hardware Availability: [OBE on MechWild](https://mechwild.com/product/orange-boy-ergo/) | |||
Make example for this keyboard (after setting up your build environment): | |||
make mechwild/obe:default | |||
Flashing example for this keyboard: | |||
make mechwild/obe:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,21 @@ | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes # Encoder Enabled | |||
EEPROM_DRIVER = i2c | |||
DEFAULT_FOLDER = mechwild/obe/f401 |