[Keyboard] ID75 v2 (#16351)

keyboards/idobao/id75/v2/config.h

@@ -0,0 +1,152 @@
+/* Copyright 2022 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6964 // ID
+#define PRODUCT_ID      0x0075
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    IDOBAO
+#define PRODUCT         ID75
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B3, C7, B6, C6 }
+#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D5, D3, D2, D1, D0, D4, D6, D7, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#undef RGB_DI_PIN
+#define RGB_DI_PIN F0
+#ifdef RGB_MATRIX_ENABLE
+#    define DRIVER_LED_TOTAL 85 /* 10 Bottom 75 top*/
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#    define RGB_MATRIX_KEYPRESSES
+#    define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#    define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_BAND_SAT
+#    define ENABLE_RGB_MATRIX_BAND_VAL
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only if RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define ENABLE_RGB_MATRIX_SPLASH
+#    define ENABLE_RGB_MATRIX_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/idobao/id75/v2/info.json

@@ -0,0 +1,10 @@
+{
+  "keyboard_name": "idobao/id75/v2",
+  "url": "",
+  "maintainer": "qmk",
+  "layouts": {
+      "LAYOUT_ortho_5x15": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
+      }
+  }
+}

keyboards/idobao/id75/v2/readme.md

@@ -0,0 +1,27 @@
+# ID75 v2
+
+![ID75 v2](https://i.imgur.com/KdAjS5f.jpg)
+
+A 5x15 ortholinear keyboard with hotswap sockets and north facing in switch RGB LEDs and RGB underglow
+
+* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
+* Hardware Supported: ID75 v2
+* Hardware Availability: https://idobao.net/products/idobao-id75-crystal-hot-swap-keyboard-kit?_pos=1&_sid=8758d3561&_ss=r
+
+Make example for this keyboard (after setting up your build environment):
+
+    make idobao/id75/v2:default
+
+Flashing example for this keyboard:
+
+    make idobao/id75/v2:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/idobao/id75/v2/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = yes            # Use link time optimization
+
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+
+LAYOUTS = ortho_5x15

keyboards/idobao/id75/v2/v2.c

@@ -0,0 +1,49 @@
+/* Copyright 2022 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "v2.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    // Key Matrix to LED Index
+{ 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, 70 },
+{ 69, 68, 67, 66, 65, 64, 63, 62, 61, 60, 59, 58, 57, 56, 55 },
+{ 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40 },
+{ 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25 },
+{ 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10 }
+}, {
+    // LED Index to Physical Position
+{8, 12},{60, 12},{112, 12},{164, 12},{216, 12},
+{216, 60},{164, 60},{112, 60},{60, 60},{8, 60},
+
+
+{224, 64}, {208, 64}, {192, 64}, {176, 64}, {160, 64}, {144, 64}, {128, 64}, {112, 64}, {96, 64}, {80, 64}, {64, 64}, {48, 64}, {32, 64}, {16, 64}, {0, 64},
+{224, 48}, {208, 48}, {192, 48}, {176, 48}, {160, 48}, {144, 48}, {128, 48}, {112, 48}, {96, 48}, {80, 48}, {64, 48}, {48, 48}, {32, 48}, {16, 48}, {0, 48},
+{224, 32}, {208, 32}, {192, 32}, {176, 32}, {160, 32}, {144, 32}, {128, 32}, {112, 32}, {96, 32}, {80, 32}, {64, 32}, {48, 32}, {32, 32}, {16, 32}, {0, 32},
+{224, 16}, {208, 16}, {192, 16}, {176, 16}, {160, 16}, {144, 16}, {128, 16}, {112, 16}, {96, 16}, {80, 16}, {64, 16}, {48, 16}, {32, 16}, {16, 16}, {0, 16},
+{224,  0}, {208,  0}, {192,  0}, {176,  0}, {160,  0}, {144,  0}, {128,  0}, {112,  0}, {96,  0}, {80,  0}, {64,  0}, {48,  0}, {32,  0}, {16,  0}, {0,  0},
+
+}, {
+    // LED Index to Flag
+2,2,2,2,2,2,2,2,2,2,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+
+} };
+
+#endif

keyboards/idobao/id75/v2/v2.h

@@ -0,0 +1,41 @@
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_5x15( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E } \
+}