@ -1,98 +0,0 @@ | |||
// Copyright 2022 Kyle McCreery (@kylemccreery) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x6D77 // mw = "MechWild" | |||
#define PRODUCT_ID 0x170C | |||
#define DEVICE_VER 0x0103 | |||
#define MANUFACTURER MechWild | |||
#define PRODUCT Mokulua | |||
/* Key matrix size */ | |||
#define MATRIX_ROWS 12 | |||
#define MATRIX_COLS 6 | |||
/* Key matrix pins */ | |||
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 } | |||
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } | |||
#define UNUSED_PINS | |||
/* Encoder pins */ | |||
#define ENCODERS_PAD_A { D2 } | |||
#define ENCODERS_PAD_B { B2 } | |||
/* Encoder resolution */ | |||
#define ENCODER_RESOLUTION 4 | |||
#define TAP_CODE_DELAY 10 | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
#define OLED_FONT_H "keyboards/mechwild/mokulua/lib/mokulua.c" | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D3 | |||
#define MASTER_LEFT | |||
//#define MASTER_RIGHT | |||
#define RGBLIGHT_SPLIT | |||
#define RGBLED_SPLIT { 8, 8 } | |||
#define SPLIT_LAYER_STATE_ENABLE | |||
#define SPLIT_LED_STATE_ENABLE | |||
#define SPLIT_MODS_ENABLE | |||
#define SPLIT_OLED_ENABLE | |||
/* RGB options */ | |||
#define RGB_DI_PIN B6 | |||
#ifdef RGB_DI_PIN | |||
# define RGBLED_NUM 16 | |||
# define RGBLIGHT_HUE_STEP 8 | |||
# define RGBLIGHT_SAT_STEP 8 | |||
# define RGBLIGHT_VAL_STEP 8 | |||
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
//# define RGBLIGHT_ANIMATIONS | |||
/*== or choose animations ==*/ | |||
//# define RGBLIGHT_EFFECT_BREATHING | |||
# define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
//# define RGBLIGHT_EFFECT_SNAKE | |||
//# define RGBLIGHT_EFFECT_KNIGHT | |||
//# define RGBLIGHT_EFFECT_CHRISTMAS | |||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
//# define RGBLIGHT_EFFECT_RGB_TEST | |||
//# define RGBLIGHT_EFFECT_ALTERNATING | |||
/*== customize breathing effect ==*/ | |||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
/*==== use exp() and sin() ====*/ | |||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* Bootmagic Lite key configuration */ | |||
#define BOOTMAGIC_LITE_ROW 0 | |||
#define BOOTMAGIC_LITE_COLUMN 0 |
@ -1,46 +0,0 @@ | |||
// Copyright 2022 Kyle McCreery (@kylemccreery) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
#define FN1_SPC LT(1, KC_SPC) | |||
#define FN2_SPC LT(2, KC_SPC) | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_FN1, | |||
_FN2, | |||
_FN3 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT( | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, _______, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC, KC_BSLS, | |||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_SCLN, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, | |||
KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, MO(2), FN1_SPC, FN2_SPC, RGB_RMOD, RGB_MOD, FN2_SPC, FN1_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_FN1] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, KC_DEL, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLSH, KC_PGUP, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END | |||
), | |||
[_FN2] = LAYOUT( | |||
_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[_FN3] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -1 +0,0 @@ | |||
# The default keymap for Mokulua using a mirrored right-half |
@ -1,46 +0,0 @@ | |||
// Copyright 2022 Kyle McCreery (@kylemccreery) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include QMK_KEYBOARD_H | |||
#define FN1_SPC LT(1, KC_SPC) | |||
#define FN2_SPC LT(2, KC_SPC) | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_FN1, | |||
_FN2, | |||
_FN3 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT( | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, _______, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC, KC_BSLS, | |||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_SCLN, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, | |||
KC_LSFT, _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, MO(2), FN1_SPC, FN2_SPC, RGB_RMOD, RGB_MOD, FN2_SPC, FN1_SPC, MO(2), KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[_FN1] = LAYOUT( | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, KC_DEL, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLSH, KC_PGUP, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END | |||
), | |||
[_FN2] = LAYOUT( | |||
_______, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[_FN3] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -1 +0,0 @@ | |||
# The VIA keymap for Mokulua using a mirrored right-half |
@ -1,22 +0,0 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes # Enable encoder | |||
OLED_ENABLE = yes # Enable OLED Screen | |||
OLED_DRIVER = SSD1306 # Define OLED Driver | |||
SPLIT_KEYBOARD = yes # Define split functionality |
@ -1 +1,22 @@ | |||
DEFAULT_FOLDER = mechwild/mokulua/standard | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes # Enable encoder | |||
OLED_ENABLE = yes # Enable OLED Screen | |||
OLED_DRIVER = SSD1306 # Define OLED Driver | |||
SPLIT_KEYBOARD = yes # Define split functionality |
@ -1,2 +0,0 @@ | |||
VIA_ENABLE = yes | |||
LTO_ENABLE = yes |
@ -1,22 +0,0 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes # Enable encoder | |||
OLED_ENABLE = yes # Enable OLED Screen | |||
OLED_DRIVER = SSD1306 # Define OLED Driver | |||
SPLIT_KEYBOARD = yes # Define split functionality |
@ -1,82 +0,0 @@ | |||
// Copyright 2022 Kyle McCreery (@Kyle McCreery) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#include "standard.h" | |||
#ifdef ENCODER_ENABLE | |||
bool encoder_update_kb(uint8_t index, bool clockwise) { | |||
if (!encoder_update_user(index, clockwise)) { return false; } | |||
switch (index) { | |||
case 0: | |||
if (clockwise) { | |||
tap_code(KC_VOLU); | |||
} else { | |||
tap_code(KC_VOLD); | |||
} | |||
break; | |||
case 1: | |||
if (clockwise) { | |||
tap_code(KC_PGUP); | |||
} else { | |||
tap_code(KC_PGDN); | |||
} | |||
break; | |||
} | |||
return true; | |||
} | |||
#endif | |||
#ifdef OLED_ENABLE | |||
oled_rotation_t oled_init_user(oled_rotation_t rotation) { | |||
return OLED_ROTATION_270; // flips the display 270 degrees | |||
} | |||
static void render_logo(void) { // Render MechWild "MW" Logo | |||
static const char PROGMEM logo_1[] = {0x8A, 0x8B, 0x8C, 0x8D, 0x00}; | |||
static const char PROGMEM logo_2[] = {0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0x00}; | |||
static const char PROGMEM logo_3[] = {0xCA, 0xCB, 0xCC, 0xCD, 0x00}; | |||
static const char PROGMEM logo_4[] = {0x20, 0x8E, 0x8F, 0x90, 0x00}; | |||
oled_set_cursor(0,0); | |||
oled_write_P(logo_1, false); | |||
oled_set_cursor(0,1); | |||
oled_write_P(logo_2, false); | |||
oled_set_cursor(0,2); | |||
oled_write_P(logo_3, false); | |||
oled_set_cursor(0,3); | |||
oled_write_P(logo_4, false); | |||
} | |||
bool oled_task_kb(void) { | |||
if (!oled_task_user()) { | |||
return false; | |||
} | |||
render_logo(); | |||
oled_set_cursor(0,6); | |||
oled_write_ln_P(PSTR("Layer"), false); | |||
switch (get_highest_layer(layer_state)) { | |||
case 0: | |||
oled_write_ln_P(PSTR("Base"), false); | |||
break; | |||
case 1: | |||
oled_write_ln_P(PSTR("FN 1"), false); | |||
break; | |||
case 2: | |||
oled_write_ln_P(PSTR("FN 2"), false); | |||
break; | |||
case 3: | |||
oled_write_ln_P(PSTR("FN 3"), false); | |||
break; | |||
default: | |||
oled_write_ln_P(PSTR("Undef"), false); | |||
} | |||
oled_write_ln_P(PSTR(""), false); | |||
// Host Keyboard LED Status | |||
led_t led_state = host_keyboard_led_state(); | |||
oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); | |||
oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); | |||
oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); | |||
return false; | |||
} | |||
#endif |
@ -1,52 +0,0 @@ | |||
// Copyright 2022 Kyle McCreery (@kylemccreery) | |||
// SPDX-License-Identifier: GPL-2.0-or-later | |||
#pragma once | |||
#include "quantum.h" | |||
#define ___ KC_NO | |||
#define LAYOUT_mirrored( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \ | |||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 }, \ | |||
{ L46, L36, L37, L26, L16, L06 }, \ | |||
{ R06, R05, R04, R03, R02, R01 }, \ | |||
{ R16, R15, R14, R13, R12, R11 }, \ | |||
{ R26, R25, R24, R23, R22, R21 }, \ | |||
{ R37, R36, R35, R34, R33, R32 }, \ | |||
{ R46, R45, R44, R43, R42, R41 }, \ | |||
{ R40, R31, R30, R20, R10, R00 } \ | |||
} | |||
#define LAYOUT_standard( \ | |||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ | |||
L10, L11, L12, L13, L14, L15, L16, R11, R12, R13, R14, R15, R16, \ | |||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ | |||
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \ | |||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ | |||
) { \ | |||
{ L00, L01, L02, L03, L04, L05 }, \ | |||
{ L10, L11, L12, L13, L14, L15 }, \ | |||
{ L20, L21, L22, L23, L24, L25 }, \ | |||
{ L30, L31, L32, L33, L34, L35 }, \ | |||
{ L40, L41, L42, L43, L44, L45 }, \ | |||
{ L46, L36, L37, L26, L16, L06 }, \ | |||
{ R01, R02, R03, R04, R05, R06 }, \ | |||
{ R11, R12, R13, R14, R15, R16 }, \ | |||
{ R21, R22, R23, R24, R25, R26 }, \ | |||
{ R32, R33, R34, R35, R36, R37 }, \ | |||
{ R41, R42, R43, R44, R45, R46 }, \ | |||
{ R00, R20, R31, R30, R40, ___ } \ | |||
} | |||
#define LAYOUT LAYOUT_standard |