@ -0,0 +1,3 @@ | |||
ifndef MAKEFILE_INCLUDED | |||
include ../../Makefile | |||
endif |
@ -0,0 +1,43 @@ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER GON | |||
#define PRODUCT NerD | |||
#define DESCRIPTION QMK port for the GON Nerd PCB | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 9 | |||
/* backlight */ | |||
#define BACKLIGHT_PIN B7 | |||
#define BACKLIGHT_LEVELS 3 | |||
/* matrix pins */ | |||
#define MATRIX_ROW_PINS { B4, E2, F4, F7, F1, F6, C6, F5, D7, C7 } | |||
#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, F0, D0, D5, D1 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
#endif |
@ -0,0 +1 @@ | |||
#include "gonnerd.h" |
@ -0,0 +1,42 @@ | |||
#ifndef GONNERD_H | |||
#define GONNERD_H | |||
#include "quantum.h" | |||
#define KEYMAP_TKL( \ | |||
K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \ | |||
K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \ | |||
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \ | |||
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \ | |||
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \ | |||
K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \ | |||
) \ | |||
{ \ | |||
{ K00, K10, K20, K30, K40, K50, K60, K70, K80 }, \ | |||
{ K01, K11, K21, K31, K41, K51, K61, K71, K81 }, \ | |||
{ K02, K12, K22, K32, K42, K52, K62, K72, K82 }, \ | |||
{ K03, K13, K23, K33, K43, K53, K63, K73, K83 }, \ | |||
{ K04, K14, K24, K34, K44, K54, K64, K74, K84 }, \ | |||
{ K05, K15, K25, K35, K45, K55, K65, K75, K85 }, \ | |||
{ K06, K16, K26, K36, K46, K56, K66, K76, K86 }, \ | |||
{ K07, K17, K27, K37, K47, K57, K67, K77, K87 }, \ | |||
{ K08, K18, K28, K38, K48, K58, K68, K78, K88 }, \ | |||
{ K09, K19, K29, K39, K49, K59, K69, K79, K89 } \ | |||
} | |||
#define KEYMAP_60( \ | |||
K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \ | |||
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \ | |||
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \ | |||
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, \ | |||
K06, K05, K78, K70, K72, K73, K74, K75 \ | |||
) KEYMAP_TKL( \ | |||
K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \ | |||
KC_NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, KC_NO, KC_NO, KC_NO, \ | |||
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, KC_NO, KC_NO, KC_NO, \ | |||
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \ | |||
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, KC_NO, \ | |||
K06, K05, K78, K70, K72, K73, K74, K75, KC_NO, KC_NO, KC_NO \ | |||
) | |||
#endif |
@ -0,0 +1,21 @@ | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
ifndef QUANTUM_DIR | |||
include ../../../../Makefile | |||
endif |
@ -0,0 +1,16 @@ | |||
#include "gonnerd.h" | |||
// Keymap layers | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = KEYMAP_60( /* Base */ | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ | |||
KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NO, KC_ENT, \ | |||
KC_LSFT,KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \ | |||
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(1), KC_RCTL), | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
}; |
@ -0,0 +1,21 @@ | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
MIDI_ENABLE = no # MIDI controls | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
ifndef QUANTUM_DIR | |||
include ../../../../Makefile | |||
endif |
@ -0,0 +1,78 @@ | |||
#include "gonnerd.h" | |||
// Keymap layers | |||
#define BASE_LAYER 0 | |||
#define FUNCTION_LAYER 1 | |||
#define SYSTEM_LAYER 2 | |||
// Key aliases | |||
#define __x__ KC_NO | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* Layer 0: Default Layer | |||
* ,-----------------------------------------------------------. | |||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | BSp | | |||
* |-----------------------------------------------------------| | |||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | |||
* |-----------------------------------------------------------| | |||
* |Funct | A| S| D| F| G| H| J| K| L| ;| '|Enter | | |||
* |-----------------------------------------------------------| | |||
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift | | |||
* |-----------------------------------------------------------' | |||
* | Ctl|Alt|Gui | Space |Gui |Alt| F2| Ctl | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[BASE_LAYER] = KEYMAP_60( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ | |||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \ | |||
KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \ | |||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(3), KC_RCTL \ | |||
), | |||
/* Layer 1: Function Layer | |||
* ,-----------------------------------------------------------. | |||
* | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11| F12| Del | | |||
* |-----------------------------------------------------------| | |||
* | |Prv|Ply|Nxt| | |Pg^|Hme|Up |End| |Br-|Br+| | | |||
* |-----------------------------------------------------------| | |||
* |Hold |Mte|Vl-|Vl+| | |Pgv|Lft|Dwn|Rgt| | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------' | |||
* | | | | | | | | | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[FUNCTION_LAYER] = KEYMAP_60( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ | |||
__x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \ | |||
KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \ | |||
KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ | |||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \ | |||
), | |||
/* Layer 2: System Layer | |||
* ,-----------------------------------------------------------. | |||
* |Reset| | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------| | |||
* | | | | | | | | | | | | | | |||
* |-----------------------------------------------------------' | |||
* | | | | | | | | | | |||
* `-----------------------------------------------------------' | |||
*/ | |||
[SYSTEM_LAYER] = KEYMAP_60( | |||
RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ | |||
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ | |||
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ | |||
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \ | |||
__x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \ | |||
), | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
}; |
@ -0,0 +1,5 @@ | |||
# Mauin's keymap for the GON NerD | |||
This layout is based on a Pok3r style layout with a standard base layer. | |||
Function layers provide access to navigation and media keys. |
@ -0,0 +1,34 @@ | |||
GON NerD keyboard firmware | |||
====================== | |||
## Changing Bootloader | |||
It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections. | |||
It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here: | |||
[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard. | |||
_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will | |||
not work anymore. You will lose your warranty and official support from GON!_ | |||
## Building | |||
Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. | |||
Depending on which keymap you would like to use, you will have to compile slightly differently. | |||
### Default | |||
To build with the default keymap, simply run `make default`. | |||
### Other Keymaps | |||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. | |||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this: | |||
``` | |||
$ make [default|jack|<name>] | |||
``` | |||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. |
@ -0,0 +1,66 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 8000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE ?= no # Console for debug(+400) | |||
COMMAND_ENABLE ?= yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE ?= no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default | |||
MIDI_ENABLE ?= no # MIDI controls | |||
UNICODE_ENABLE ?= no # Unicode | |||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE ?= no # Audio output on port C6 |