[Keyboard] Add keyboard hifumi (#5341)

* Add keyboard hifumi

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/keymaps/default/keymap.c

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/keymaps/test/keymap.c

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Add DIODE_DIRECTION

* Rename readme.md

keyboards/hifumi/config.h

@@ -0,0 +1,56 @@
+/*
+Copyright 2019 zk-phi
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    riconken
+#define PRODUCT         hifumi
+#define DESCRIPTION     A macropad with 6 keys
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6 }
+#define MATRIX_COL_PINS { F4, F5, F6 }
+#define UNUSED_PINS
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLED_NUM 6
+#define RGBLIGHT_LIMIT_VAL 255
+#define RGBLIGHT_HUE_STEP 5
+#define RGBLIGHT_ANIMATIONS

keyboards/hifumi/hifumi.h

@@ -0,0 +1,31 @@
+/* Copyright 2019 zk-phi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+    k00, k01, k02, \
+    k10, k11, k12 \
+) \
+{ \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 } \
+}

keyboards/hifumi/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "hifumi",
+  "url": "https://github.com/zk-phi/1x2x3-keyboard",
+  "maintainer": "riconken",
+  "width": 3,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+        "layout": [{"label":"F5", "x":0, "y":0}, {"label":"Up", "x":1, "y":0}, {"label":"PrSc", "x":2, "y":0}, {"label":"Left", "x":0, "y":1}, {"label":"Down", "x":1, "y":1}, {"label":"Right", "x":2, "y":1}]
+    }
+  }
+}

keyboards/hifumi/keymaps/default/keymap.c

@@ -0,0 +1,47 @@
+/* Copyright 2019 zk-phi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+enum layers {
+    DEFAULT,
+    RAISE,
+    LOWER,
+    ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [DEFAULT] = LAYOUT(
+        LT(RAISE, KC_F5), KC_UP,   LT(LOWER, KC_PSCR),
+        KC_LEFT,          KC_DOWN, KC_RIGHT
+    ),
+    [RAISE] = LAYOUT(
+        _______, KC_PGUP, MO(ADJUST),
+        KC_HOME, KC_PGDN, KC_END
+    ),
+    [LOWER] = LAYOUT(
+        MO(ADJUST), _______, _______,
+        _______,    _______, _______
+    ),
+    [ADJUST] = LAYOUT(
+        _______,        RGB_TOG,        _______,
+        RGB_MODE_SNAKE, RGB_MODE_PLAIN, RGB_HUI
+    )
+};

keyboards/hifumi/keymaps/test/keymap.c

@@ -0,0 +1,32 @@
+/* Copyright 2019 zk-phi
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+enum layers {
+    DEFAULT
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [DEFAULT] = LAYOUT(
+        KC_1, KC_2, KC_3,
+        KC_A, KC_B, KC_C
+    )
+};

keyboards/hifumi/readme.md

@@ -0,0 +1,13 @@
+# hifumi
+
+A macro pad with 6 keys.
+
+Keyboard Maintainer: riconken, [zk-phi](https://github.com/zk-phi)  
+Hardware Supported: hifumi PCB, Pro Micro   
+Hardware Availability: [PCB & Case Data](https://github.com/zk-phi/1x2x3-keyboard)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make hifumi:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/hifumi/rules.mk

@@ -0,0 +1,62 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing