|
|
@ -33,7 +33,7 @@ $ pip install pyusb |
|
|
|
``` |
|
|
|
|
|
|
|
If you prefer, you can just build it and flash the firmware directly with |
|
|
|
`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it |
|
|
|
`bootloadHID` if you boot the board while holding down `Backspace` (`Top Right Key`) to keep it |
|
|
|
in the bootloader: |
|
|
|
|
|
|
|
``` |
|
|
@ -43,7 +43,7 @@ $ bootloadHID -r jj40_default.hex |
|
|
|
|
|
|
|
## Troubleshooting |
|
|
|
|
|
|
|
1. Try plugging the board in while pressing `L_Ctrl`. This will force it |
|
|
|
1. Try plugging the board in while pressing `Backspace` (`Top Right Key`). This will force it |
|
|
|
to boot only the bootloader without loading the firmware. Once this is |
|
|
|
done, just reflash the board with the original firmware. |
|
|
|
2. Sometimes USB hubs can act weird, so try connecting the board directly |
|
|
|