[Keyboard] ez_maker/directpins for easy one-offs in qmk_configurator (#13321)

* new keyboard: handwired/directpins

* fix promicro keyboard_name

* add teensy2 and teensy2++ support

* align with handwired/onekey

* tweak pids

* add teensy 3.2 and teensy lc to directpins

* move directpins from handwired to ez_maker

* add docs for easy maker

docs/_summary.md

@@ -36,6 +36,7 @@
   * Guides
     * [Customizing Functionality](custom_quantum_functions.md)
     * [Driver Installation with Zadig](driver_installation_zadig.md)
+    * [Easy Maker for One Offs](easy_maker.md)
     * [Keymap Overview](keymap.md)
     * Development Environments
       * [Docker Guide](getting_started_docker.md)

docs/easy_maker.md

@@ -0,0 +1,31 @@
+# Easy Maker - Build One-Off Projects In Configurator
+
+Have you ever needed an easy way to program a controller, such as a Proton C or Teensy 2.0, for a one-off project you're building? QMK has you covered with the Easy Maker. Now you can create a firmware in minutes using QMK Configurator.
+
+There are different styles of Easy Maker available depending on your needs:
+
+* [Direct Pin](https://config.qmk.fm/#/?filter=ez_maker/direct) - Connect a single switch to a single pin
+* Direct Pin + Backlight (Coming Soon) - Like Direct Pin but dedicates a single pin to [Backlight](feature_backlight.md) control
+* Direct Pin + Numlock (Coming Soon) - Like Direct Pin but dedicates a single pin to the Numlock LED
+* Direct Pin + Capslock (Coming Soon) - Like Direct Pin but dedicates a single pin to the Numlock LED
+* Direct Pin + Encoder (Coming Soon) - Like Direct Pin but uses 2 pins to add a single rotary encoder
+
+## Quickstart
+
+The easiest way to get started is with the Direct Pin boards. This will assign a single key to each pin and you can short that pin to ground to activate it. Select your MCU from the Keyboard dropdown here:
+
+* <https://config.qmk.fm/#/?filter=ez_maker/direct>
+
+For more details see the [Direct Pin](#direct-pin) section.
+
+# Direct Pin
+
+As its name implies Direct Pin works by connecting one switch per pin. The other side of the switch should be connected to ground (VSS or GND.) You don't need any other components, your MCU has internal pull-up resistors so that the switch sensing can work.
+
+Here is a schematic showing how we connect a single button to pin A3 on a ProMicro:
+
+![Schematic diagram showing a ProMicro with a wire coming out of A3, connecting to the left side of a switch. Another wire comes out of the right side of the switch to connect to the Ground Plane.](https://i.imgur.com/JcDhZll.png)
+
+Once you have wired your switches you can assign keycodes to each pin and build a firmware by selecting the MCU you are using from the Keyboard dropdown. Use this link to show only Easy Maker Direct Pin:
+
+* <https://config.qmk.fm/#/?filter=ez_maker/direct>

keyboards/ez_maker/directpins/promicro/config.h

@@ -0,0 +1,20 @@
+/*
+Copyright 2021 Zach White
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"

keyboards/ez_maker/directpins/promicro/info.json

@@ -0,0 +1,49 @@
+{
+    "manufacturer": "Zach White",
+    "keyboard_name": "DirectPins ProMicro",
+    "maintainer": "skullydazed",
+    "bootloader": "atmel-dfu",
+    "debounce": 5,
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["D3", null],
+            ["D2", null],
+            ["D1", "F4"],
+            ["D0", "F5"],
+            ["D4", "F6"],
+            ["C6", "F7"],
+            ["D7", "B1"],
+            ["E6", "B3"],
+            ["B4", "B2"],
+            ["B5", "B6"]
+        ]
+    },
+    "processor": "atmega32u4",
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2320",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"D3", "matrix": [0, 0], "x":0, "y":0},
+                {"label":"D2", "matrix": [1, 0], "x":0, "y":1},
+                {"label":"D1", "matrix": [2, 0], "x":0, "y":4}, {"label":"F4", "matrix": [2, 1], "x":2, "y":4},
+                {"label":"D0", "matrix": [3, 0], "x":0, "y":5}, {"label":"F5", "matrix": [3, 1], "x":2, "y":5},
+                {"label":"D4", "matrix": [4, 0], "x":0, "y":6}, {"label":"F6", "matrix": [4, 1], "x":2, "y":6},
+                {"label":"C6", "matrix": [5, 0], "x":0, "y":7}, {"label":"F7", "matrix": [5, 1], "x":2, "y":7},
+                {"label":"D7", "matrix": [6, 0], "x":0, "y":8}, {"label":"B1", "matrix": [6, 1], "x":2, "y":8},
+                {"label":"E6", "matrix": [7, 0], "x":0, "y":9}, {"label":"B3", "matrix": [7, 1], "x":2, "y":9},
+                {"label":"B4", "matrix": [8, 0], "x":0, "y":10}, {"label":"B2", "matrix": [8, 1], "x":2, "y":10},
+                {"label":"B5", "matrix": [9, 0], "x":0, "y":11}, {"label":"B6", "matrix": [9, 1], "x":2, "y":11}
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/promicro/keymaps/default/keymap.json

@@ -0,0 +1,19 @@
+{
+    "keyboard": "ez_maker/directpins/promicro",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",
+            "KC_1",
+            "KC_2", "KC_3",
+            "KC_4", "KC_5",
+            "KC_6", "KC_7",
+            "KC_8", "KC_9",
+            "KC_A", "KC_B",
+            "KC_C", "KC_D",
+            "KC_E", "KC_F",
+            "KC_G", "KC_H"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/promicro/promicro.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "promicro.h"

keyboards/ez_maker/directpins/promicro/promicro.h

@@ -0,0 +1,19 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/ez_maker/directpins/promicro/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Promicro Pinout Guide](https://i.imgur.com/LZ194Hf.jpg)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Promicro
+* Hardware Availability: Sparkfun, chinese clones
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/promicro -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/promicro -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/proton_c/info.json

@@ -0,0 +1,60 @@
+{
+    "manufacturer": "Zach White",
+    "keyboard_name": "DirectPins Proton C",
+    "maintainer": "skullydazed",
+    "debounce": 5,
+    "processor": "STM32F303",
+    "board": "QMK_PROTON_C",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["A9", null],
+            ["A10", null],
+            ["B7", "A2"],
+            ["B6", "A1"],
+            ["B5", "A0"],
+            ["B4", "B8"],
+            ["B3", "B13"],
+            ["B2", "B14"],
+            ["B1", "B15"],
+            ["B0", "B9"],
+            ["A4", "B10"],
+            ["A5", "B11"],
+            ["A6", "B12"],
+            ["A7", "A14"],
+            ["A8", "A13"],
+            ["A15", null]
+        ]
+    },
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2321",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "label": "A9", "matrix": [0, 0], "x": 0, "y": 0 },
+                { "label": "A10", "matrix": [1, 0], "x": 0, "y": 1 },
+                { "label": "B7", "matrix": [2, 0], "x": 0, "y": 4 }, { "label": "A2", "matrix": [2, 1], "x": 2, "y": 4 },
+                { "label": "B6", "matrix": [3, 0], "x": 0, "y": 5 }, { "label": "A1", "matrix": [3, 1], "x": 2, "y": 5 },
+                { "label": "B5", "matrix": [4, 0], "x": 0, "y": 6 }, { "label": "A0", "matrix": [4, 1], "x": 2, "y": 6 },
+                { "label": "B4", "matrix": [5, 0], "x": 0, "y": 7 }, { "label": "B8", "matrix": [5, 1], "x": 2, "y": 7 },
+                { "label": "B3", "matrix": [6, 0], "x": 0, "y": 8 }, { "label": "B13", "matrix": [6, 1], "x": 2, "y": 8 },
+                { "label": "B2", "matrix": [7, 0], "x": 0, "y": 9 }, { "label": "B14", "matrix": [7, 1], "x": 2, "y": 9 },
+                { "label": "B1", "matrix": [8, 0], "x": 0, "y": 10 }, { "label": "B15", "matrix": [8, 1], "x": 2, "y": 10 },
+                { "label": "B0", "matrix": [9, 0], "x": 0, "y": 11 }, { "label": "B9", "matrix": [9, 1], "x": 2, "y": 11 },
+                { "label": "A4", "matrix": [10, 0], "x": 0, "y": 13 }, { "label": "B10", "matrix": [10, 1], "x": 2, "y": 13 },
+                { "label": "A5", "matrix": [11, 0], "x": 0, "y": 14 }, { "label": "B11", "matrix": [11, 1], "x": 2, "y": 14 },
+                { "label": "A6", "matrix": [12, 0], "x": 0, "y": 15 }, { "label": "B12", "matrix": [12, 1], "x": 2, "y": 15 },
+                { "label": "A7", "matrix": [13, 0], "x": 0, "y": 16 }, { "label": "A14", "matrix": [13, 1], "x": 2, "y": 16 },
+                { "label": "A8", "matrix": [14, 0], "x": 0, "y": 17 }, { "label": "A13", "matrix": [14, 1], "x": 2, "y": 17 },
+                { "label": "A15", "matrix": [15, 0], "x": 0, "y": 18 }
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/proton_c/keymaps/default/keymap.json

@@ -0,0 +1,25 @@
+{
+    "keyboard": "ez_maker/directpins/proton_c",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",
+            "KC_1",
+            "KC_2", "KC_3",
+            "KC_4", "KC_5",
+            "KC_6", "KC_7",
+            "KC_8", "KC_9",
+            "KC_A", "KC_B",
+            "KC_C", "KC_D",
+            "KC_E", "KC_F",
+            "KC_G", "KC_H",
+            "KC_I", "KC_J",
+            "KC_K", "KC_L",
+            "KC_M", "KC_N",
+            "KC_O", "KC_P",
+            "KC_Q", "KC_R",
+            "KC_S"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/proton_c/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for directpins

keyboards/ez_maker/directpins/proton_c/proton_c.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "proton_c.h"

keyboards/ez_maker/directpins/proton_c/proton_c.h

@@ -0,0 +1,19 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/ez_maker/directpins/proton_c/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Proton-C Pinout Guide](https://i.imgur.com/NqsqmdF.png)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Proton C
+* Hardware Availability: https://qmk.fm/proton-c
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/proton_c -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/proton_c -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/readme.md

@@ -0,0 +1,5 @@
+# DirectPins
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+This directory exists so that people creating one-offs can easily hook up their pins to switches and flash QMK to it.

keyboards/ez_maker/directpins/teensy_2/config.h

@@ -0,0 +1,20 @@
+/*
+Copyright 2021 Zach White
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"

keyboards/ez_maker/directpins/teensy_2/info.json

@@ -0,0 +1,52 @@
+{
+    "manufacturer": "Zach White",
+    "keyboard_name": "DirectPins Teensy 2.0",
+    "maintainer": "skullydazed",
+    "processor": "atmega32u4",
+    "bootloader": "halfkay",
+    "debounce": 5,
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["B0", "F0"],
+            ["B1", "F1"],
+            ["B2", "F4"],
+            ["B3", "F5"],
+            ["B7", "F6"],
+            ["D0", "F7"],
+            ["D1", "B6"],
+            ["D2", "B5"],
+            ["D3", "B4"],
+            ["C6", "D7"],
+            ["C7", "D6"],
+            ["D5", "D4"]
+        ]
+    },
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2322",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"B0", "matrix": [0, 0], "x":0, "y":1},                                                                                                       {"label":"F0", "matrix": [0, 1], "x":4, "y":1},
+                {"label":"B1", "matrix": [1, 0], "x":0, "y":2},                                                                                                       {"label":"F1", "matrix": [1, 1], "x":4, "y":2},
+                {"label":"B2", "matrix": [2, 0], "x":0, "y":3},                                                                                                       {"label":"F4", "matrix": [2, 1], "x":4, "y":3},
+                {"label":"B3", "matrix": [3, 0], "x":0, "y":4},                                                                                                       {"label":"F5", "matrix": [3, 1], "x":4, "y":4},
+                {"label":"B7", "matrix": [4, 0], "x":0, "y":5},                                                                                                       {"label":"F6", "matrix": [4, 1], "x":4, "y":5},
+                {"label":"D0", "matrix": [5, 0], "x":0, "y":6},                                                                                                       {"label":"F7", "matrix": [5, 1], "x":4, "y":6},
+                {"label":"D1", "matrix": [6, 0], "x":0, "y":7},                                                                                                       {"label":"B6", "matrix": [6, 1], "x":4, "y":7},
+                {"label":"D2", "matrix": [7, 0], "x":0, "y":8},                                                                                                       {"label":"B5", "matrix": [7, 1], "x":4, "y":8},
+                {"label":"D3", "matrix": [8, 0], "x":0, "y":9},                                                                                                      {"label":"B4", "matrix": [8, 1], "x":4, "y":9},
+                {"label":"C6", "matrix": [9, 0], "x":0, "y":10},                                                                                                      {"label":"D7", "matrix": [9, 1], "x":4, "y":10},
+                {"label":"C7", "matrix": [10, 0], "x":0, "y":11}, {"label":"D5", "matrix": [11, 0], "x":1, "y":11}, {"label":"D4", "matrix": [11, 1], "x":3, "y":11}, {"label":"D6", "matrix": [10, 1], "x":4, "y":11}
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/teensy_2/keymaps/default/keymap.json

@@ -0,0 +1,20 @@
+{
+    "keyboard": "ez_maker/directpins/teensy2",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",                 "KC_1",
+            "KC_2",                 "KC_3",
+            "KC_4",                 "KC_5",
+            "KC_6",                 "KC_7",
+            "KC_8",                 "KC_9",
+            "KC_A",                 "KC_B",
+            "KC_C",                 "KC_D",
+            "KC_E",                 "KC_F",
+            "KC_G",                 "KC_H",
+            "KC_I",                 "KC_J",
+            "KC_K", "KC_L", "KC_M", "KC_N"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/teensy_2/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Teensy 2.0 Pinout Guide](https://www.pjrc.com/teensy/pinout2a.png)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Teensy 2.0
+* Hardware Availability: https://www.pjrc.com/
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/teensy2 -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/teensy2 -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/teensy_2/teensy2.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "teensy2.h"

keyboards/ez_maker/directpins/teensy_2/teensy2.h

@@ -0,0 +1,19 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/ez_maker/directpins/teensy_2pp/config.h

@@ -0,0 +1,20 @@
+/*
+Copyright 2021 Zach White
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"

keyboards/ez_maker/directpins/teensy_2pp/info.json

@@ -0,0 +1,67 @@
+{
+    "manufacturer": "Zach White",
+    "keyboard_name": "DirectPins Teensy 2.0++",
+    "maintainer": "skullydazed",
+    "processor": "at90usb1286",
+    "bootloader": "halfkay",
+    "debounce": 5,
+    "diode_direction": "COL2ROW",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["B7", null, null, "B6"],
+            ["D0", null, null, "B5"],
+            ["D1", null, null, "B4"],
+            ["D2", null, null, "B3"],
+            ["D3", null, null, "B2"],
+            ["D4", "E5", "E4", "B1"],
+            ["D5", null, null, "B0"],
+            ["D6", null, null, "E7"],
+            ["D7", null, null, "E6"],
+            ["E0", null, null, null],
+            ["E1", null, null, null],
+            ["C0", null, null, "F0"],
+            ["C1", "A4", "A0", "F1"],
+            ["C2", "A5", "A1", "F2"],
+            ["C3", "A6", "A2", "F3"],
+            ["C4", "A7", "A3", "F4"],
+            ["C5", null, null, "F5"],
+            ["C6", null, null, "F6"],
+            ["C7", null, null, "F7"],
+        ]
+    },
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2323",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"B7", "matrix": [0, 0], "x":0, "y":1},                                                                                                       {"label":"B6", "matrix": [0, 3], "x":5, "y":1},
+                {"label":"D0", "matrix": [1, 0], "x":0, "y":2},                                                                                                       {"label":"B5", "matrix": [1, 3], "x":5, "y":2},
+                {"label":"D1", "matrix": [2, 0], "x":0, "y":3},                                                                                                       {"label":"B4", "matrix": [2, 3], "x":5, "y":3},
+                {"label":"D2", "matrix": [3, 0], "x":0, "y":4},                                                                                                       {"label":"B3", "matrix": [3, 3], "x":5, "y":4},
+                {"label":"D3", "matrix": [4, 0], "x":0, "y":5},                                                                                                       {"label":"B2", "matrix": [4, 3], "x":5, "y":5},
+                {"label":"D4", "matrix": [5, 0], "x":0, "y":6},   {"label":"E5", "matrix": [5, 1], "x":2, "y":6},   {"label":"E4", "matrix": [5, 2], "x":3, "y":6},   {"label":"B1", "matrix": [5, 3], "x":5, "y":6},
+                {"label":"D5", "matrix": [6, 0], "x":0, "y":7},                                                                                                       {"label":"B0", "matrix": [6, 3], "x":5, "y":7},
+                {"label":"D6", "matrix": [7, 0], "x":0, "y":8},                                                                                                       {"label":"E7", "matrix": [7, 3], "x":5, "y":8},
+                {"label":"D7", "matrix": [8, 0], "x":0, "y":9},                                                                                                       {"label":"E6", "matrix": [8, 3], "x":5, "y":9},
+                {"label":"E0", "matrix": [9, 0], "x":0, "y":10},                                                                                                      
+                {"label":"E1", "matrix": [10, 0], "x":0, "y":11}, 
+                {"label":"C0", "matrix": [11, 0], "x":0, "y":12},                                                                                                     {"label":"F0", "matrix": [11, 3], "x":5, "y":12},
+                {"label":"C1", "matrix": [12, 0], "x":0, "y":13}, {"label":"A4", "matrix": [12, 1], "x":2, "y":13}, {"label":"A0", "matrix": [12, 2], "x":3, "y":13}, {"label":"F1", "matrix": [12, 3], "x":5, "y":13},
+                {"label":"C2", "matrix": [13, 0], "x":0, "y":14}, {"label":"A5", "matrix": [13, 1], "x":2, "y":14}, {"label":"A1", "matrix": [13, 2], "x":3, "y":14}, {"label":"F2", "matrix": [13, 3], "x":5, "y":14},
+                {"label":"C3", "matrix": [14, 0], "x":0, "y":15}, {"label":"A6", "matrix": [14, 1], "x":2, "y":15}, {"label":"A2", "matrix": [14, 2], "x":3, "y":15}, {"label":"F3", "matrix": [14, 3], "x":5, "y":15},
+                {"label":"C4", "matrix": [15, 0], "x":0, "y":16}, {"label":"A7", "matrix": [15, 1], "x":2, "y":16}, {"label":"A3", "matrix": [15, 2], "x":3, "y":16}, {"label":"F4", "matrix": [15, 3], "x":5, "y":16},
+                {"label":"C5", "matrix": [16, 0], "x":0, "y":17},                                                                                                     {"label":"F5", "matrix": [16, 3], "x":5, "y":17},
+                {"label":"C6", "matrix": [17, 0], "x":0, "y":18},                                                                                                     {"label":"F6", "matrix": [17, 3], "x":5, "y":18},
+                {"label":"C7", "matrix": [18, 0], "x":0, "y":19},                                                                                                     {"label":"F7", "matrix": [18, 3], "x":5, "y":19}
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/teensy_2pp/keymaps/default/keymap.json

@@ -0,0 +1,28 @@
+{
+    "keyboard": "ez_maker/directpins/promicro",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",                    "KC_1",
+            "KC_2",                    "KC_3",
+            "KC_4",                    "KC_5",
+            "KC_6",                    "KC_7",
+            "KC_8",                    "KC_9",
+            "KC_A",  "KC_B",  "KC_C",  "KC_D",
+            "KC_E",                    "KC_F",
+            "KC_G",                    "KC_H",
+            "KC_I",                    "KC_J",
+            "KC_J",   
+            "KC_L",   
+            "KC_M",                    "KC_N",
+            "KC_O",  "KC_P",  "KC_Q",  "KC_R",
+            "KC_S",  "KC_T",  "KC_U",  "KC_V",
+            "KC_W",  "KC_X",  "KC_Y",  "KC_Z",
+            "KC_P1", "KC_P2", "KC_P3", "KC_P4",
+            "KC_P5",                   "KC_P6",
+            "KC_P7",                   "KC_P8",
+            "KC_P9",                   "KC_P0"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/teensy_2pp/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Teensy 2.0++ Pinout Guide](https://www.pjrc.com/teensy/pinout4a.png)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Teensy 2.0++
+* Hardware Availability: https://www.pjrc.com/
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/teensy2pp -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/teensy2pp -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/teensy_2pp/teensy2.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "teensy2.h"

keyboards/ez_maker/directpins/teensy_2pp/teensy2.h

@@ -0,0 +1,19 @@
+/* Copyright 2021 Zach White
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/ez_maker/directpins/teensy_32/chconf.h

@@ -0,0 +1,53 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/ez_maker/onekey/teensy_32/chconf.h -r platforms/chibios/common/configs/chconf.h`
+ */
+
+#pragma once
+
+#define CH_CFG_ST_FREQUENCY 1000
+
+#define CH_CFG_ST_TIMEDELTA 0
+
+#define CH_CFG_TIME_QUANTUM 20
+
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+#define CH_CFG_FACTORY_PIPES TRUE
+
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+#define CH_DBG_FILL_THREADS TRUE
+
+#include_next <chconf.h>
+

keyboards/ez_maker/directpins/teensy_32/config.h

@@ -0,0 +1,23 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// i2c_master defines
+#define I2C1_SCL 0 // A2 on pinout = B0
+#define I2C1_SDA 1 // A3 on pinout = B1
+#define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+#define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2

keyboards/ez_maker/directpins/teensy_32/halconf.h

@@ -0,0 +1,27 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/ez_maker/onekey/teensy_32/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next <halconf.h>
+

keyboards/ez_maker/directpins/teensy_32/info.json

@@ -0,0 +1,53 @@
+{
+    "manufacturer": "QMK",
+    "keyboard_name": "DirectPins Teensy 3.2",
+    "maintainer": "skullydazed",
+    "debounce": 5,
+    "processor": "MK20DX256",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["LINE_PIN0",  null,         null],
+            ["LINE_PIN1",  null,         null],
+            ["LINE_PIN2",  null,         "LINE_PIN23"],
+            ["LINE_PIN3",  "LINE_PIN24", "LINE_PIN22"],
+            ["LINE_PIN4",  "LINE_PIN25", "LINE_PIN21"],
+            ["LINE_PIN5",  null,         "LINE_PIN20"],
+            ["LINE_PIN6",  null,         "LINE_PIN19"],
+            ["LINE_PIN7",  null,         "LINE_PIN18"],
+            ["LINE_PIN8",  null,         "LINE_PIN17"],
+            ["LINE_PIN9",  null,         "LINE_PIN16"],
+            ["LINE_PIN10", null,         "LINE_PIN15"],
+            ["LINE_PIN11", null,         "LINE_PIN14"],
+            ["LINE_PIN12", "E30",        "LINE_PIN13"],
+        ]
+    },
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2324",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "label": "0", "matrix": [0, 0], "x": 0, "y": 1 },
+                { "label": "1", "matrix": [1, 0], "x": 0, "y": 2 },
+                { "label": "2", "matrix": [2, 0], "x": 0, "y": 3 },                                                           { "label": "23", "matrix": [2, 2], "x": 3, "y": 3 },
+                { "label": "3", "matrix": [3, 0], "x": 0, "y": 4 },    { "label": "24", "matrix": [3, 1], "x": 2, "y": 4 },   { "label": "22", "matrix": [3, 2], "x": 3, "y": 4 },
+                { "label": "4", "matrix": [4, 0], "x": 0, "y": 5 },    { "label": "25", "matrix": [4, 1], "x": 2, "y": 5 },   { "label": "21", "matrix": [4, 2], "x": 3, "y": 5 },
+                { "label": "5", "matrix": [5, 0], "x": 0, "y": 6 },                                                           { "label": "20", "matrix": [5, 2], "x": 3, "y": 6 },
+                { "label": "6", "matrix": [6, 0], "x": 0, "y": 7 },                                                           { "label": "19", "matrix": [6, 2], "x": 3, "y": 7 },
+                { "label": "7", "matrix": [7, 0], "x": 0, "y": 8 },                                                           { "label": "18", "matrix": [7, 2], "x": 3, "y": 8 },
+                { "label": "8", "matrix": [8, 0], "x": 0, "y": 9 },                                                           { "label": "17", "matrix": [8, 2], "x": 3, "y": 9 },
+                { "label": "9", "matrix": [9, 0], "x": 0, "y": 10 },                                                          { "label": "16", "matrix": [9, 2], "x": 3, "y": 10 },
+                { "label": "10", "matrix": [10, 0], "x": 0, "y": 11 },                                                        { "label": "15", "matrix": [10, 2], "x": 3, "y": 11 },
+                { "label": "11", "matrix": [11, 0], "x": 0, "y": 12 },                                                        { "label": "14", "matrix": [11, 2], "x": 3, "y": 12 },
+                { "label": "12", "matrix": [12, 0], "x": 0, "y": 13 }, { "label": "26", "matrix": [12, 1], "x": 2, "y": 13 }, { "label": "13", "matrix": [12, 2], "x": 3, "y": 13 }
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/teensy_32/keymaps/default/keymap.json

@@ -0,0 +1,22 @@
+{
+    "keyboard": "ez_maker/directpins/teensy_32",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",
+            "KC_1",
+            "KC_2",                 "KC_3",
+            "KC_4",         "KC_5", "KC_6",
+            "KC_7",         "KC_8", "KC_9",
+            "KC_A",                 "KC_B",
+            "KC_C",                 "KC_D",
+            "KC_E",                 "KC_F",
+            "KC_G",                 "KC_H",
+            "KC_I",                 "KC_J",
+            "KC_K",                 "KC_L",
+            "KC_M",                 "KC_N",
+            "KC_O",         "KC_P", "KC_Q"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/teensy_32/mcuconf.h

@@ -0,0 +1,51 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                  TRUE
+
+/* Need to redefine this, since the default (configured for K20x) might not apply
+ *   2 for Teensy LC
+ *   5 for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY         5
+
+/*
+ * I2C driver settings
+ */
+#define KINETIS_I2C_USE_I2C0                TRUE
+#define KINETIS_I2C_I2C0_PRIORITY           4
+
+#endif /* _MCUCONF_H_ */

keyboards/ez_maker/directpins/teensy_32/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Teensy 3.2 Pinout Guide](https://www.pjrc.com/teensy/card7a_rev1.png)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Teensy 3.2
+* Hardware Availability: https://pjrc.com/
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/teensy_32 -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/teensy_32 -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/teensy_32/rules.mk

@@ -0,0 +1,2 @@
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/ez_maker/directpins/teensy_lc/chconf.h

@@ -0,0 +1,53 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/ez_maker/onekey/teensy_lc/chconf.h -r platforms/chibios/common/configs/chconf.h`
+ */
+
+#pragma once
+
+#define CH_CFG_ST_FREQUENCY 1000
+
+#define CH_CFG_ST_TIMEDELTA 0
+
+#define CH_CFG_TIME_QUANTUM 20
+
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+
+#define CH_CFG_FACTORY_PIPES TRUE
+
+#define CH_DBG_SYSTEM_STATE_CHECK TRUE
+
+#define CH_DBG_ENABLE_CHECKS TRUE
+
+#define CH_DBG_ENABLE_ASSERTS TRUE
+
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+#define CH_DBG_FILL_THREADS TRUE
+
+#include_next <chconf.h>
+

keyboards/ez_maker/directpins/teensy_lc/config.h

@@ -0,0 +1,23 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// i2c_master defines
+#define I2C1_SCL 0 // A2 on pinout = B0
+#define I2C1_SDA 1 // A3 on pinout = B1
+#define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
+#define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2

keyboards/ez_maker/directpins/teensy_lc/halconf.h

@@ -0,0 +1,27 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/ez_maker/onekey/teensy_lc/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next <halconf.h>
+

keyboards/ez_maker/directpins/teensy_lc/info.json

@@ -0,0 +1,53 @@
+{
+    "manufacturer": "Zach White",
+    "keyboard_name": "DirectPins Teensy LC",
+    "maintainer": "skullydazed",
+    "debounce": 5,
+    "processor": "MKL26Z64",
+    "features": {
+        "bootmagic_lite": true,
+        "extrakey": true,
+        "mousekey": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["LINE_PIN0",  null,         null],
+            ["LINE_PIN1",  null,         null],
+            ["LINE_PIN2",  null,         "LINE_PIN23"],
+            ["LINE_PIN3",  "LINE_PIN24", "LINE_PIN22"],
+            ["LINE_PIN4",  "LINE_PIN25", "LINE_PIN21"],
+            ["LINE_PIN5",  null,         "LINE_PIN20"],
+            ["LINE_PIN6",  null,         "LINE_PIN19"],
+            ["LINE_PIN7",  null,         "LINE_PIN18"],
+            ["LINE_PIN8",  null,         "LINE_PIN17"],
+            ["LINE_PIN9",  null,         "LINE_PIN16"],
+            ["LINE_PIN10", null,         "LINE_PIN15"],
+            ["LINE_PIN11", null,         "LINE_PIN14"],
+            ["LINE_PIN12", "E30",        "LINE_PIN13"],
+        ]
+    },
+    "usb": {
+        "device_ver": "0x0001",
+        "pid": "0x2325",
+        "vid": "0xFEED"
+    },
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "label": "0", "matrix": [0, 0], "x": 0, "y": 1 },
+                { "label": "1", "matrix": [1, 0], "x": 0, "y": 2 },
+                { "label": "2", "matrix": [2, 0], "x": 0, "y": 3 },                                                           { "label": "23", "matrix": [2, 2], "x": 3, "y": 3 },
+                { "label": "3", "matrix": [3, 0], "x": 0, "y": 4 },    { "label": "24", "matrix": [3, 1], "x": 2, "y": 4 },   { "label": "22", "matrix": [3, 2], "x": 3, "y": 4 },
+                { "label": "4", "matrix": [4, 0], "x": 0, "y": 5 },    { "label": "25", "matrix": [4, 1], "x": 2, "y": 5 },   { "label": "21", "matrix": [4, 2], "x": 3, "y": 5 },
+                { "label": "5", "matrix": [5, 0], "x": 0, "y": 6 },                                                           { "label": "20", "matrix": [5, 2], "x": 3, "y": 6 },
+                { "label": "6", "matrix": [6, 0], "x": 0, "y": 7 },                                                           { "label": "19", "matrix": [6, 2], "x": 3, "y": 7 },
+                { "label": "7", "matrix": [7, 0], "x": 0, "y": 8 },                                                           { "label": "18", "matrix": [7, 2], "x": 3, "y": 8 },
+                { "label": "8", "matrix": [8, 0], "x": 0, "y": 9 },                                                           { "label": "17", "matrix": [8, 2], "x": 3, "y": 9 },
+                { "label": "9", "matrix": [9, 0], "x": 0, "y": 10 },                                                          { "label": "16", "matrix": [9, 2], "x": 3, "y": 10 },
+                { "label": "10", "matrix": [10, 0], "x": 0, "y": 11 },                                                        { "label": "15", "matrix": [10, 2], "x": 3, "y": 11 },
+                { "label": "11", "matrix": [11, 0], "x": 0, "y": 12 },                                                        { "label": "14", "matrix": [11, 2], "x": 3, "y": 12 },
+                { "label": "12", "matrix": [12, 0], "x": 0, "y": 13 }, { "label": "26", "matrix": [12, 1], "x": 2, "y": 13 }, { "label": "13", "matrix": [12, 2], "x": 3, "y": 13 }
+            ]
+        }
+    }
+}

keyboards/ez_maker/directpins/teensy_lc/keymaps/default/keymap.json

@@ -0,0 +1,22 @@
+{
+    "keyboard": "ez_maker/directpins/teensy_lc",
+    "keymap": "default",
+    "layout": "LAYOUT_all",
+    "layers": [
+        [
+            "KC_0",
+            "KC_1",
+            "KC_2",                 "KC_3",
+            "KC_4",         "KC_5", "KC_6",
+            "KC_7",         "KC_8", "KC_9",
+            "KC_A",                 "KC_B",
+            "KC_C",                 "KC_D",
+            "KC_E",                 "KC_F",
+            "KC_G",                 "KC_H",
+            "KC_I",                 "KC_J",
+            "KC_K",                 "KC_L",
+            "KC_M",                 "KC_N",
+            "KC_O",         "KC_P", "KC_Q"
+        ]
+    ]
+}

keyboards/ez_maker/directpins/teensy_lc/mcuconf.h

@@ -0,0 +1,51 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                  TRUE
+
+/* Need to redefine this, since the default (configured for K20x) might not apply
+ *   2 for Teensy LC
+ *   5 for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY         2
+
+/*
+ * I2C driver settings
+ */
+#define KINETIS_I2C_USE_I2C0                TRUE
+#define KINETIS_I2C_I2C0_PRIORITY           4
+
+#endif /* _MCUCONF_H_ */

keyboards/ez_maker/directpins/teensy_lc/readme.md

@@ -0,0 +1,19 @@
+# DirectPins
+
+![Teensy LC Pinout Guide](https://www.pjrc.com/teensy/card6a_rev2.png)
+
+Easily assign keys to pins for your custom project using QMK Configurator.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Teensy LC
+* Hardware Availability: https://pjcr.com/
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb ez_maker/directpins/teensy_lc -km default
+
+Flashing example for this keyboard:
+
+    qmk flash -kb ez_maker/directpins/teensy_lc -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ez_maker/directpins/teensy_lc/rules.mk

@@ -0,0 +1,5 @@
+# MCU name
+USE_CHIBIOS_CONTRIB = yes
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE