* initial commit * fixup init_rows and read_rows routine * fixup matrix based on Marcus's tracing info * add a temporary keymap * add notes * use a standard tkl ansi keymap * turn on that last column * backslash and backspace row left to fix * reorg from backslash to pgdn * got the matrix done but the backspace location at K4N is still suspect * add reset info into readme * add qmk configurator support * add community layout support * remove uneeded keymap readme * add a new column just for the reset switch * change copyright dates * add cautionary message to readme as we don't know about the lighting condition yet * Update keyboards/duck/orion/v3/v3.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/duck/orion/v3/v3.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/duck/orion/v3/v3.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * change bootloader commentspull/6923/head
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "Duck Orion V3", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 18.25, | |||
"height": 6.5, | |||
"layouts": { | |||
"LAYOUT_tkl_ansi": { | |||
"layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] | |||
} | |||
} | |||
} |
@ -0,0 +1,7 @@ | |||
# Duck Orion | |||
Non official firmware for custom TKL Korean keyboard made by Duck. | |||
Newest version is the [Orion V3](http://duck0113.tistory.com/127) | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1 @@ | |||
DEFAULT_FOLDER = duck/orion/v3 |
@ -0,0 +1,50 @@ | |||
/* | |||
Copyright 2019 MechMerlin <mechmerlin@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x444B // Duck ("DK") | |||
#define PRODUCT_ID 0x4F52 // Orion ("OR") | |||
#define DEVICE_VER 0x0002 | |||
#define MANUFACTURER Duck | |||
#define PRODUCT Orion V3 | |||
#define DESCRIPTION TKL Korean custom keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 18 | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 3 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGB_DI_PIN D6 | |||
#define RGBLED_NUM 17 | |||
/* Set to top left most key */ | |||
#define BOOTMAGIC_LITE_ROW 4 | |||
#define BOOTMAGIC_LITE_COLUMN 10 | |||
#define TAPPING_TERM 200 |
@ -0,0 +1,82 @@ | |||
/* | |||
Copyright 2019 MechMerlin <mechmerlin@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <avr/interrupt.h> | |||
#include <avr/io.h> | |||
#include <stdbool.h> | |||
#include <util/delay.h> | |||
#include "indicator_leds.h" | |||
#include "duck_led/duck_led.h" | |||
#define LED_T1H 600 | |||
#define LED_T1L 650 | |||
#define LED_T0H 250 | |||
#define LED_T0L 1000 | |||
void send_bit_d4(bool bitVal) { | |||
if(bitVal) { | |||
asm volatile ( | |||
"sbi %[port], %[bit] \n\t" | |||
".rept %[onCycles] \n\t" | |||
"nop \n\t" | |||
".endr \n\t" | |||
"cbi %[port], %[bit] \n\t" | |||
".rept %[offCycles] \n\t" | |||
"nop \n\t" | |||
".endr \n\t" | |||
:: | |||
[port] "I" (_SFR_IO_ADDR(PORTD)), | |||
[bit] "I" (4), | |||
[onCycles] "I" (NS_TO_CYCLES(LED_T1H) - 2), | |||
[offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2)); | |||
} else { | |||
asm volatile ( | |||
"sbi %[port], %[bit] \n\t" | |||
".rept %[onCycles] \n\t" | |||
"nop \n\t" | |||
".endr \n\t" | |||
"cbi %[port], %[bit] \n\t" | |||
".rept %[offCycles] \n\t" | |||
"nop \n\t" | |||
".endr \n\t" | |||
:: | |||
[port] "I" (_SFR_IO_ADDR(PORTD)), | |||
[bit] "I" (4), | |||
[onCycles] "I" (NS_TO_CYCLES(LED_T0H) - 2), | |||
[offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2)); | |||
} | |||
} | |||
void send_value(uint8_t byte, enum Device device) { | |||
for(uint8_t b = 0; b < 8; b++) { | |||
if(device == Device_STATUSLED) { | |||
send_bit_d4(byte & 0b10000000); | |||
byte <<= 1; | |||
} | |||
} | |||
} | |||
// Send the LED indicators to the WS2811S chips | |||
void indicator_leds_set(bool leds[8]) { | |||
uint8_t led_cnt; | |||
cli(); | |||
for(led_cnt = 0; led_cnt < 8; led_cnt++) | |||
send_value(leds[led_cnt] ? 255 : 0, Device_STATUSLED); | |||
sei(); | |||
show(); | |||
} | |||
@ -0,0 +1 @@ | |||
void indicator_leds_set(bool leds[8]); |
@ -0,0 +1,26 @@ | |||
/* Copyright 2019 MechMerlin <mechmerlin@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_tkl_ansi(\ | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \ | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN, \ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, \ | |||
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT) \ | |||
}; |
@ -0,0 +1,272 @@ | |||
/* | |||
Copyright 2019 MechMerlin <mechmerlin@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <util/delay.h> | |||
#include <avr/io.h> | |||
#include <stdio.h> | |||
#include "matrix.h" | |||
#include "util.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
static uint8_t debouncing = DEBOUNCE; | |||
/* matrix state(1:on, 0:off) */ | |||
static matrix_row_t matrix[MATRIX_ROWS]; | |||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||
static uint8_t read_rows(uint8_t col); | |||
static void init_rows(void); | |||
static void unselect_cols(void); | |||
static void select_col(uint8_t col); | |||
__attribute__ ((weak)) | |||
void matrix_init_kb(void) { | |||
matrix_init_user(); | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_scan_kb(void) { | |||
matrix_scan_user(); | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_init_user(void) { | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_scan_user(void) { | |||
} | |||
void backlight_init_ports(void) | |||
{ | |||
DDRD |= 0b11010000; | |||
PORTD &= ~0b01010000; | |||
PORTD |= 0b10000000; | |||
DDRB |= 0b00011111; | |||
PORTB &= ~0b00001110; | |||
PORTB |= 0b00010001; | |||
DDRE |= 0b01000000; | |||
PORTE &= ~0b01000000; | |||
} | |||
void matrix_init(void) { | |||
backlight_init_ports(); | |||
unselect_cols(); | |||
init_rows(); | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = 0; | |||
matrix_debouncing[i] = 0; | |||
} | |||
matrix_init_quantum(); | |||
} | |||
uint8_t matrix_scan(void) { | |||
for (uint8_t col = 0; col < MATRIX_COLS; col++) { | |||
select_col(col); | |||
_delay_us(3); | |||
uint8_t rows = read_rows(col); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col); | |||
bool curr_bit = rows & (1<<row); | |||
if (prev_bit != curr_bit) { | |||
matrix_debouncing[row] ^= ((matrix_row_t)1<<col); | |||
if (debouncing) { | |||
dprint("bounce!: "); dprintf("%02X", debouncing); dprintln(); | |||
} | |||
debouncing = DEBOUNCE; | |||
} | |||
} | |||
unselect_cols(); | |||
} | |||
if (debouncing) { | |||
if (--debouncing) { | |||
_delay_ms(1); | |||
} else { | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
matrix[i] = matrix_debouncing[i]; | |||
} | |||
} | |||
} | |||
matrix_scan_quantum(); | |||
return 1; | |||
} | |||
inline matrix_row_t matrix_get_row(uint8_t row) { | |||
return matrix[row]; | |||
} | |||
void matrix_print(void) { | |||
print("\nr/c 0123456789ABCDEF\n"); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row))); | |||
} | |||
} | |||
/* Row pin configuration - diode connected | |||
* row: 0 1 2 3 4 5 | |||
* pin: PD0 PD1 PD2 PD3 PD5 PB7 | |||
* | |||
* Backspace uses its own pin PE2 on the column pin, row pin is grounded | |||
*/ | |||
static void init_rows(void) { | |||
DDRD &= ~0b00101111; | |||
PORTD &= ~0b00101111; | |||
DDRB &= ~0b10000000; | |||
PORTB &= ~0b10000000; | |||
DDRE &= ~0b00000100; | |||
PORTE |= 0b00000100; | |||
} | |||
static uint8_t read_rows(uint8_t col) { | |||
return (PIND&(1<<0) ? (1<<0) : 0) | | |||
(PIND&(1<<1) ? (1<<1) : 0) | | |||
(PIND&(1<<2) ? (1<<2) : 0) | | |||
(PIND&(1<<3) ? (1<<3) : 0) | | |||
(PIND&(1<<5) ? (1<<4) : 0) | | |||
(PINB&(1<<7) ? (1<<5) : 0) | | |||
(col== 17 ? ((PINE&(1<<2) ? 0 : (1<<1))) : 0); | |||
} | |||
uint8_t read_fwkey(void) | |||
{ | |||
return PINE&(1<<2) ? 0 : (1<<2); | |||
} | |||
/* Columns 0 - 15 | |||
* | |||
* atmega32u4 decoder pin | |||
* PC6 U1 E3 | |||
* PB6 U2 E3 | |||
* PF0 U1, U2 A0 | |||
* PF1 U1, U2 A1 | |||
* PC7 U1, U2 A2 | |||
* | |||
* These columns uses two 74HC237D 3 to 8 bit demultiplexers. | |||
* col / pin: PC6 PB6 PF0 PF1 PC7 Decoder Pin | |||
* 0: 1 0 0 0 0 U1 Y0 | |||
* 1: 1 0 1 0 0 U1 Y1 | |||
* 2: 1 0 0 1 0 U1 Y2 | |||
* 3: 1 0 1 1 0 U1 Y3 | |||
* 4: 1 0 0 0 1 U1 Y4 | |||
* 5: 1 0 1 0 1 U1 Y5 | |||
* 6: 1 0 0 1 1 U1 Y6 | |||
* 7: 1 0 1 1 1 U1 Y7 | |||
* | |||
* 8: 0 1 0 0 0 U2 Y0 | |||
* 9: 0 1 1 0 0 U2 Y1 | |||
* 10: 0 1 0 1 0 U2 Y2 | |||
* 11: 0 1 1 1 0 U2 Y3 | |||
* 12: 0 1 0 0 1 U2 Y4 | |||
* 13: 0 1 1 0 1 U2 Y5 | |||
* 14: 0 1 0 1 1 U2 Y6 | |||
* 15: 0 1 1 1 1 U2 Y7 | |||
* | |||
*/ | |||
static void unselect_cols(void) { | |||
DDRB |= 0b01100000; | |||
PORTB &= ~0b01100000; | |||
DDRC |= 0b11000000; | |||
PORTC &= ~0b11000000; | |||
DDRF |= 0b00000011; | |||
PORTF &= ~0b00000011; | |||
} | |||
static void select_col(uint8_t col) { | |||
switch (col) { | |||
case 0: | |||
PORTC |= 0b01000000; | |||
break; | |||
case 1: | |||
PORTC |= 0b01000000; | |||
PORTF |= 0b00000001; | |||
break; | |||
case 2: | |||
PORTC |= 0b01000000; | |||
PORTF |= 0b00000010; | |||
break; | |||
case 3: | |||
PORTC |= 0b01000000; | |||
PORTF |= 0b00000011; | |||
break; | |||
case 4: | |||
PORTC |= 0b11000000; | |||
break; | |||
case 5: | |||
PORTC |= 0b11000000; | |||
PORTF |= 0b00000001; | |||
break; | |||
case 6: | |||
PORTC |= 0b11000000; | |||
PORTF |= 0b00000010; | |||
break; | |||
case 7: | |||
PORTC |= 0b11000000; | |||
PORTF |= 0b00000011; | |||
break; | |||
case 8: | |||
PORTB |= 0b01000000; | |||
break; | |||
case 9: | |||
PORTB |= 0b01000000; | |||
PORTF |= 0b00000001; | |||
break; | |||
case 10: | |||
PORTB |= 0b01000000; | |||
PORTF |= 0b00000010; | |||
break; | |||
case 11: | |||
PORTB |= 0b01000000; | |||
PORTF |= 0b00000011; | |||
break; | |||
case 12: | |||
PORTB |= 0b01000000; | |||
PORTC |= 0b10000000; | |||
break; | |||
case 13: | |||
PORTB |= 0b01000000; | |||
PORTF |= 0b00000001; | |||
PORTC |= 0b10000000; | |||
break; | |||
case 14: | |||
PORTB |= 0b01000000; | |||
PORTF |= 0b00000010; | |||
PORTC |= 0b10000000; | |||
break; | |||
case 15: | |||
PORTB |= 0b01000000; | |||
PORTF |= 0b00000011; | |||
PORTC |= 0b10000000; | |||
break; | |||
case 16: | |||
PORTB |= 0b00100000; | |||
break; | |||
} | |||
} |
@ -0,0 +1,30 @@ | |||
# Duck Orion V3 | |||
Non official firmware for custom TKL Korean keyboard made by Duck. | |||
Group buy was run December 2018 via [geekhack](https://geekhack.org/index.php?topic=98581.0) with 100 keyboards total. | |||
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) | |||
Hardware Supported: Duck Eagle/Viper PCB Ver 2.0, Atmega32u4 | |||
Hardware Availability: Wait until GB of the next revision | |||
Make example for this keyboard (after setting up your build environment): | |||
make duck/orion/v3:default | |||
**Reset Key:** To put the Orion V3 into reset, hold Backspace key (`K4N`) while plugging in. | |||
**CAUTION:** At this time 10/03/19 lighting has not been tested fully and may not properly work. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Hardware Notes | |||
The Orion V3 PCB consists of: | |||
### Microchips | |||
2 74HC237D 3-to-8 line decoders | |||
1 Atmega32u4 microcontroller | |||
2 WS2811 LED controller | |||
## Notes | |||
Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix. |
@ -0,0 +1,39 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
RGBLIGHT_ENABLE = yes | |||
CUSTOM_MATRIX = yes | |||
SRC += indicator_leds.c \ | |||
matrix.c duck_led/duck_led.c | |||
LAYOUTS = tkl_ansi |
@ -0,0 +1,65 @@ | |||
/* Copyright 2019 MechMerlin <mechmerlin@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "v3.h" | |||
#include "indicator_leds.h" | |||
enum BACKLIGHT_AREAS { | |||
BACKLIGHT_ALPHAS = 0b00000010, | |||
BACKLIGHT_MODNUM = 0b00001000 | |||
}; | |||
void backlight_set(uint8_t level) { | |||
switch(level) { | |||
case 0: | |||
PORTB |= BACKLIGHT_ALPHAS; | |||
PORTB |= BACKLIGHT_MODNUM; | |||
break; | |||
case 1: | |||
PORTB &= ~BACKLIGHT_ALPHAS; | |||
PORTB |= BACKLIGHT_MODNUM; | |||
break; | |||
case 2: | |||
PORTB |= BACKLIGHT_ALPHAS; | |||
PORTB &= ~BACKLIGHT_MODNUM; | |||
break; | |||
case 3: | |||
PORTB &= ~BACKLIGHT_ALPHAS; | |||
PORTB &= ~BACKLIGHT_MODNUM; | |||
break; | |||
} | |||
} | |||
// Port from backlight_update_state | |||
void led_set_kb(uint8_t usb_led) { | |||
bool status[8] = { | |||
IS_HOST_LED_ON(USB_LED_SCROLL_LOCK), /* LED 3 */ | |||
IS_HOST_LED_ON(USB_LED_CAPS_LOCK), /* LED 2 */ | |||
IS_HOST_LED_ON(USB_LED_NUM_LOCK), /* LED 1 */ | |||
layer_state & (1<<2), /* LED 6 */ | |||
layer_state & (1<<1), /* LED 5 */ | |||
layer_state & (1<<0) ? 0: 1, /* LED 4 */ | |||
layer_state & (1<<5), /* LED 8 */ | |||
layer_state & (1<<4) /* LED 7 */ | |||
}; | |||
indicator_leds_set(status); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
return process_record_user(keycode, record); | |||
} |
@ -0,0 +1,36 @@ | |||
/* Copyright 2019 MechMerlin <mechmerlin@gmail.com> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define ___ KC_NO | |||
#define LAYOUT_tkl_ansi( \ | |||
K5A, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, \ | |||
K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4R, K4O, K4P, K4Q, \ | |||
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, \ | |||
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, \ | |||
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1N, K1P, \ | |||
K0A, K0B, K0C, K0F, K0I, K0K, K0M, K0N, K0O, K0P, K0Q \ | |||
) { \ | |||
{ K5A, ___, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, ___ }, \ | |||
{ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, ___, K4O, K4P, K4Q, K4R }, \ | |||
{ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3O, K3P, K3Q, ___ }, \ | |||
{ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, ___, K2N, ___, ___, ___, ___ }, \ | |||
{ K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, ___, ___, K1N, ___, K1P, ___, ___ }, \ | |||
{ K0A, K0B, K0C, ___, ___, K0F, ___, ___, K0I, ___, K0K, ___, K0M, K0N, K0O, K0P, K0Q, ___ } \ | |||
} |