* Inital port of xd84 * Inital port of xd84 - review commentspull/5166/head
@ -0,0 +1,241 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x4084 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER KPrepublic | |||
#define PRODUCT XD84 | |||
#define DESCRIPTION KPrepublic XD84 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 15 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
//#define MATRIX_ROW_PINS { D0, D5 } | |||
//#define MATRIX_COL_PINS { F1, F0, B0 } | |||
//#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
//#define DIODE_DIRECTION COL2ROW | |||
// TODO: NOT WORKING - original kimera code seems to suggest B6 or C7 in backlight.c | |||
// however tracing seems to suggest this is not true (as C7 is RGB) | |||
#define BACKLIGHT_PIN B5 | |||
#define BACKLIGHT_LEVELS 3 | |||
// #define BACKLIGHT_BREATHING | |||
#define RGB_DI_PIN C7 | |||
#define RGBLED_NUM 7 | |||
#define RGBLIGHT_ANIMATIONS | |||
// #ifdef RGB_DI_PIN | |||
// #define RGBLIGHT_HUE_STEP 8 | |||
// #define RGBLIGHT_SAT_STEP 8 | |||
// #define RGBLIGHT_VAL_STEP 8 | |||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
// /*== all animations enable ==*/ | |||
// #define RGBLIGHT_ANIMATIONS | |||
// /*== or choose animations ==*/ | |||
// #define RGBLIGHT_EFFECT_BREATHING | |||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
// #define RGBLIGHT_EFFECT_SNAKE | |||
// #define RGBLIGHT_EFFECT_KNIGHT | |||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||
// #endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
/* defined by default; to change, uncomment and set to the combination you want */ | |||
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
/* | |||
* HD44780 LCD Display Configuration | |||
*/ | |||
/* | |||
#define LCD_LINES 2 //< number of visible lines of the display | |||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||
#if LCD_IO_MODE | |||
#define LCD_PORT PORTB //< port for the LCD lines | |||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||
#define LCD_RS_PIN 3 //< pin for RS line | |||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||
#define LCD_RW_PIN 2 //< pin for RW line | |||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||
#define LCD_E_PIN 1 //< pin for Enable line | |||
#endif | |||
*/ | |||
/* Bootmagic Lite key configuration */ | |||
// #define BOOTMAGIC_LITE_ROW 0 | |||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,112 @@ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include "wait.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "util.h" | |||
#include "matrix.h" | |||
#include "debounce.h" | |||
#include "quantum.h" | |||
//_____COMMON__________________________________________________________________ | |||
// user-defined overridable functions | |||
__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } | |||
__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } | |||
__attribute__((weak)) void matrix_init_user(void) {} | |||
__attribute__((weak)) void matrix_scan_user(void) {} | |||
//_____COULD BE COMMON_________________________________________________________ | |||
/* matrix state(1:on, 0:off) */ | |||
/*static*/ matrix_row_t raw_matrix[MATRIX_ROWS]; | |||
/*static*/ matrix_row_t matrix[MATRIX_ROWS]; | |||
#if (MATRIX_COLS <= 8) | |||
# define print_matrix_header() print("\nr/c 01234567\n") | |||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) | |||
# define matrix_bitpop(i) bitpop(matrix[i]) | |||
# define ROW_SHIFTER ((uint8_t)1) | |||
#elif (MATRIX_COLS <= 16) | |||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") | |||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) | |||
# define matrix_bitpop(i) bitpop16(matrix[i]) | |||
# define ROW_SHIFTER ((uint16_t)1) | |||
#elif (MATRIX_COLS <= 32) | |||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") | |||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) | |||
# define matrix_bitpop(i) bitpop32(matrix[i]) | |||
# define ROW_SHIFTER ((uint32_t)1) | |||
#endif | |||
__attribute__ ((weak)) | |||
uint8_t matrix_rows(void) { | |||
return MATRIX_ROWS; | |||
} | |||
__attribute__ ((weak)) | |||
uint8_t matrix_cols(void) { | |||
return MATRIX_COLS; | |||
} | |||
__attribute__ ((weak)) | |||
matrix_row_t matrix_get_row(uint8_t row) { | |||
return matrix[row]; | |||
} | |||
__attribute__ ((weak)) | |||
uint8_t matrix_key_count(void) { | |||
uint8_t count = 0; | |||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||
count += matrix_bitpop(i); | |||
} | |||
return count; | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_print(void) { | |||
print_matrix_header(); | |||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||
phex(row); print(": "); | |||
print_matrix_row(row); | |||
print("\n"); | |||
} | |||
} | |||
//_____CUSTOM MATRIX 'LITE'____________________________________________________ | |||
__attribute__ ((weak)) | |||
void custom_matrix_init(void) { | |||
} | |||
__attribute__ ((weak)) | |||
bool custom_matrix_scan(matrix_row_t current_matrix[]) { | |||
bool changed = true; | |||
return changed; | |||
} | |||
__attribute__ ((weak)) | |||
void matrix_init(void) { | |||
custom_matrix_init(); | |||
// initialize matrix state: all keys off | |||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { | |||
raw_matrix[i] = 0; | |||
matrix[i] = 0; | |||
} | |||
debounce_init(MATRIX_ROWS); | |||
matrix_init_quantum(); | |||
} | |||
__attribute__ ((weak)) | |||
uint8_t matrix_scan(void) { | |||
bool changed = custom_matrix_scan(raw_matrix); | |||
debounce(raw_matrix, matrix, MATRIX_ROWS, changed); | |||
matrix_scan_quantum(); | |||
return 1; | |||
} |
@ -0,0 +1,132 @@ | |||
# XD84 | |||
Development docs covering the following: | |||
- Kimera core | |||
- RGB | |||
- Backlight | |||
## Kimera core | |||
![Kimera core](https://gd2.alicdn.com/imgextra/i4/159916802/TB2qsIgdrJkpuFjy1zcXXa5FFXa_!!159916802.jpg) | |||
What little available info that was available for the qmk port | |||
- atmega32u4 16Mhz | |||
- board seems to have a 6Mhz crystal | |||
- 2x PCA9555 I2C IO expander | |||
Links: | |||
- [Schematic, BOM, Gerbers](/kairyu/kimera/blob/master/kimera_core) | |||
- [Original firmware](https://github.com/kairyu/tmk_keyboard_custom/tree/master/keyboard/kimera) | |||
```c | |||
/* | |||
Kimera_core_v1.0 Components | |||
U1 (atmega32u4) | |||
,----------------. | |||
TX --| TX0(PD3) RAW |-- | |||
RX --| RX1(PD2) GND |-- | |||
--| GND RESET |-- RST | |||
--| GND VCC |-- | |||
SDA --| 2(PD1) (PF4)A3 |-- | |||
SCL --| 3(PD0) (PF5)A2 |-- | |||
(INT) --| 4(PD4) (PF6)A1 |-- | |||
--| 5(PC6) (PF7)A0 |-- | |||
--| 6(PD7) (PB1)15 |-- SCK | |||
LED2 --| 7(PE6) (PB3)14 |-- MISO | |||
LED1 --| 8(PB4) (PB2)16 |-- MOSI | |||
LED3 --| 9(PB5) (PB6)10 |-- LED4 | |||
`----------------' | |||
IC1 (PCA9555) IC2 (PCA9555) | |||
,----------. ,----------. | |||
SDA --| SDA P00 |-- P1 SDA --| SDA P00 |-- P17 | |||
SCL --| SCL P01 |-- P2 SCL --| SCL P01 |-- P18 | |||
INT --| INT P02 |-- P3 INT --| INT P02 |-- P19 | |||
| P03 |-- P4 | P03 |-- P20 | |||
GND --| A0 P04 |-- P5 VCC --| A0 P04 |-- P21 | |||
SJ1 --| A1 P05 |-- P6 SJ1 --| A1 P05 |-- P22 | |||
SJ2 --| A2 P06 |-- P7 SJ2 --| A2 P06 |-- P23 | |||
| P07 |-- P8 | P07 |-- P24 | |||
| | | | | |||
| P10 |-- P9 | P10 |-- P25 | |||
| P11 |-- P10 | P11 |-- P26 | |||
| P12 |-- P11 | P12 |-- P27 | |||
| P13 |-- P12 | P13 |-- P28 | |||
| P14 |-- P13 | P14 |-- P29 | |||
| P15 |-- P14 | P15 |-- P30 | |||
| P16 |-- P15 | P16 |-- P31 | |||
| P17 |-- P16 | P17 |-- P32 | |||
`----------' `----------' | |||
*/ | |||
``` | |||
### Bootloader | |||
Default bootloader is `atmel-dfu`. | |||
Reboot to bootloader via magnetic switch next to icsp header. | |||
Flash using regular dfu methods. | |||
### XD84 pin mappings | |||
Taken from [kimera-config.json](https://github.com/kairyu/tkg/blob/master/keyboard/config/kimera-config.json) | |||
"row_mapping": [ 1, 2, 3, 4, 5, 6 ], | |||
"col_mapping": [ 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 ], | |||
# RGB | |||
- PIN C7 | |||
- Number of RGB LED 7 | |||
# Backlight | |||
TODO - not working | |||
## Assumptions | |||
### Pin/Port mappings | |||
- All cols are on the same IC | |||
- All rows are on the same IC and port | |||
- Pins mapped sequentially | |||
- Each port only does row or column not a mixture of both | |||
- No need to have complex port config | |||
- | |||
| ROW index | Kimera Pin | PCA9555 | | |||
| ----------|------------|-------------------| | |||
| 0 | 1 | IC1 Port 0 pin 0 | | |||
| 1 | 2 | IC1 Port 0 pin 1 | | |||
| 2 | 3 | IC1 Port 0 pin 2 | | |||
| 3 | 4 | IC1 Port 0 pin 3 | | |||
| 4 | 5 | IC1 Port 0 pin 4 | | |||
| 5 | 6 | IC1 Port 0 pin 5 | | |||
- Safe enough to assume `row_index == pin` | |||
| COL index | Kimera Pin | PCA9555 | | |||
| ----------|------------|-------------------| | |||
| 0 | 17 | IC2 Port 0 pin 0 | | |||
| 1 | 18 | IC2 Port 0 pin 1 | | |||
| 2 | 19 | IC2 Port 0 pin 2 | | |||
| 3 | 20 | IC2 Port 0 pin 3 | | |||
| 4 | 21 | IC2 Port 0 pin 4 | | |||
| 5 | 22 | IC2 Port 0 pin 5 | | |||
| 6 | 23 | IC2 Port 0 pin 6 | | |||
| 7 | 24 | IC2 Port 0 pin 7 | | |||
| 8 | 25 | IC2 Port 1 pin 0 | | |||
| 9 | 26 | IC2 Port 1 pin 1 | | |||
| 10 | 27 | IC2 Port 1 pin 2 | | |||
| 11 | 28 | IC2 Port 1 pin 3 | | |||
| 12 | 29 | IC2 Port 1 pin 4 | | |||
| 13 | 30 | IC2 Port 1 pin 5 | | |||
| 14 | 31 | IC2 Port 1 pin 6 | | |||
- Safe enough to assume here col_index does not need to be converted to pin | |||
- Reading both ports one after the other gives us the same sequential behavior | |||
- maps to the usual practice of reading matrix columns | |||
- while this technically gives 16 column reads, the 16th column can never be set so is safely ignored | |||
## Notes | |||
[pca9555 datasheet](https://www.ti.com/lit/ds/symlink/pca9555.pdf) | |||
- Other Kimera based boards with non sequential pin mappings, pins mapped across ICs, or mixed row/col configs will need more complicated `pin -> i2c_addr,port,pin` logic as well as rather more complex pin functions. | |||
## Return to stock firmware | |||
Not tested but original firmware seems to be available in the [kairyu/tkg-firmware](https://github.com/kairyu/tkg-firmware/blob/master/kimera-core.hex) repo. |
@ -0,0 +1,18 @@ | |||
{ | |||
"keyboard_name": "XD84", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 16, | |||
"height": 6, | |||
"layouts": { | |||
"LAYOUT_75_ansi": { | |||
"key_count": 84, | |||
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] | |||
}, | |||
"LAYOUT_75_iso": { | |||
"key_count": 85, | |||
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Delete", "x":15, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"delete", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25, "h":2}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"@", "x":11.75, "y":3}, {"label":"~", "x":12.75, "y":3}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}] | |||
} | |||
} | |||
} |
@ -0,0 +1,38 @@ | |||
#include QMK_KEYBOARD_H | |||
#define L1_RGUI LM(1, MOD_RGUI) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_75_ansi( | |||
/* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PAUS, KC_DEL, | |||
/* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, | |||
/* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, | |||
/* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──────────────├─────────┤ */ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, | |||
/* ├─────────────────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───────────┬─────────┼─────────┤ */ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, | |||
/* ├───────────┬─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───────┬─────────┼─────────┼─────────┤ */ | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, L1_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
/* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ */ | |||
), | |||
[1] = LAYOUT_75_ansi( | |||
/* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ | |||
_______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──────────────├─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├─────────────────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───────────┬─────────┼─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├───────────┬─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───────┬─────────┼─────────┼─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
/* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ */ | |||
) | |||
}; |
@ -0,0 +1,38 @@ | |||
#include QMK_KEYBOARD_H | |||
#define L1_RGUI LM(1, MOD_RGUI) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_75_iso( | |||
/* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_DEL, | |||
/* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, | |||
/* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, | |||
/* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬ ├─────────┤ */ | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, | |||
/* ├───────────┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴─────────┴─┬─────────┼─────────┤ */ | |||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, | |||
/* ├───────────┼─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───────┬─────────┼─────────┼─────────┤ */ | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, L1_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
/* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ */ | |||
), | |||
[1] = LAYOUT_75_iso( | |||
/* ┌─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┴─────────┼─────────┤ */ | |||
_______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├─────────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬────┴────┬──────────────┼─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├──────────────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬──────┴──┬ ├─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├───────────┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴───┬─────┴─────────┴─┬─────────┼─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
/* ├───────────┼─────────┴─┬───────┴───┬─────┴─────────┴─────────┴─────────┴─────────┴─────────┴───────┬─┴───────┬─┴───────┬─┴───────┬─────────┼─────────┼─────────┤ */ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
/* └───────────┴───────────┴───────────┴───────────────────────────────────────────────────────────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ */ | |||
) | |||
}; |
@ -0,0 +1,94 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <stdint.h> | |||
#include <stdbool.h> | |||
#include <avr/io.h> | |||
#include <string.h> | |||
#include "matrix.h" | |||
#include "pca9555.h" | |||
#include "quantum.h" | |||
#include "debug.h" | |||
// PCA9555 slave addresses | |||
#define IC1 0x20 | |||
#define IC2 0x21 | |||
//_____Utility funcs___________________________________________________________ | |||
static void init_pins(void) { | |||
// init all cols high - IC2 all input | |||
pca9555_set_config(IC2, PCA9555_PORT0, ALL_INPUT);//same as initial state | |||
pca9555_set_config(IC2, PCA9555_PORT1, ALL_INPUT);//same as initial state | |||
// init all rows - IC1 port0 input | |||
pca9555_set_config(IC1, PCA9555_PORT0, ALL_INPUT);//same as initial state | |||
} | |||
static void select_row(uint8_t row) { | |||
// For the XD84 all rows are on the same IC and port | |||
// so its safe enough to assume here row == pin | |||
uint8_t pin = row; | |||
uint8_t mask = 1 << pin; | |||
pca9555_set_output(IC1, PCA9555_PORT0, ALL_HIGH & (~mask)); | |||
pca9555_set_config(IC1, PCA9555_PORT0, ALL_INPUT & (~mask)); | |||
} | |||
static uint16_t read_cols(void) { | |||
uint16_t state_1 = pca9555_readPins(IC2, PCA9555_PORT0); | |||
uint16_t state_2 = pca9555_readPins(IC2, PCA9555_PORT1); | |||
// For the XD84 all cols are on the same IC and mapped sequentially | |||
// while this technically gives 16 column reads, | |||
// the 16th column can never be set so is safely ignored | |||
return ~((state_2 << 8) | state_1); | |||
} | |||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { | |||
// Store last value of row prior to reading | |||
matrix_row_t last_row_value = current_matrix[current_row]; | |||
// Clear data in matrix row | |||
current_matrix[current_row] = 0; | |||
// Select row and wait for row selecton to stabilize | |||
select_row(current_row); | |||
wait_us(30); | |||
current_matrix[current_row] = read_cols(); | |||
// No need to Unselect row as the next `select_row` will blank everything | |||
return (last_row_value != current_matrix[current_row]); | |||
} | |||
//_____CUSTOM MATRIX IMPLEMENTATION____________________________________________________ | |||
void custom_matrix_init(void) { | |||
pca9555_init(IC1); | |||
pca9555_init(IC2); | |||
init_pins(); | |||
} | |||
bool custom_matrix_scan(matrix_row_t current_matrix[]) { | |||
bool changed = false; | |||
for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { | |||
changed |= read_cols_on_row(current_matrix, current_row); | |||
} | |||
return changed; | |||
} |
@ -0,0 +1,63 @@ | |||
#include "i2c_master.h" | |||
#include "pca9555.h" | |||
#include "debug.h" | |||
#define SLAVE_TO_ADDR(n) (n<<1) | |||
#define TIMEOUT 100 | |||
enum { | |||
CMD_INPUT_0 = 0, | |||
CMD_INPUT_1, | |||
CMD_OUTPUT_0, | |||
CMD_OUTPUT_1, | |||
CMD_INVERSION_0, | |||
CMD_INVERSION_1, | |||
CMD_CONFIG_0, | |||
CMD_CONFIG_1 | |||
}; | |||
void pca9555_init(uint8_t slave_addr) { | |||
static uint8_t s_init = 0; | |||
if (!s_init) { | |||
i2c_init(); | |||
s_init=1; | |||
} | |||
// TODO: could check device connected | |||
//i2c_start(SLAVE_TO_ADDR(slave) | I2C_WRITE); | |||
//i2c_stop(); | |||
} | |||
void pca9555_set_config(uint8_t slave_addr, uint8_t port, uint8_t conf) { | |||
uint8_t addr = SLAVE_TO_ADDR(slave_addr); | |||
uint8_t cmd = port ? CMD_OUTPUT_1 : CMD_OUTPUT_0; | |||
i2c_status_t ret = i2c_writeReg(addr, cmd, &conf, sizeof(conf), TIMEOUT); | |||
if (ret != I2C_STATUS_SUCCESS) { | |||
print("pca9555_set_config::FAILED\n"); | |||
} | |||
} | |||
void pca9555_set_output(uint8_t slave_addr, uint8_t port, uint8_t conf) { | |||
uint8_t addr = SLAVE_TO_ADDR(slave_addr); | |||
uint8_t cmd = port ? CMD_CONFIG_1 : CMD_CONFIG_0; | |||
i2c_status_t ret = i2c_writeReg(addr, cmd, &conf, sizeof(conf), TIMEOUT); | |||
if (ret != I2C_STATUS_SUCCESS) { | |||
print("pca9555_set_output::FAILED\n"); | |||
} | |||
} | |||
uint8_t pca9555_readPins(uint8_t slave_addr, uint8_t port) { | |||
uint8_t addr = SLAVE_TO_ADDR(slave_addr); | |||
uint8_t cmd = port ? CMD_INPUT_1 : CMD_INPUT_0; | |||
uint8_t data = 0; | |||
i2c_status_t ret = i2c_readReg(addr, cmd, &data, sizeof(data), TIMEOUT); | |||
if (ret != I2C_STATUS_SUCCESS) { | |||
print("pca9555_readPins::FAILED\n"); | |||
} | |||
return data; | |||
} |
@ -0,0 +1,55 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* | |||
PCA9555 | |||
,----------. | |||
SDA --| SDA P00 |-- P1 | |||
SCL --| SCL P01 |-- P2 | |||
INT --| INT P02 |-- P3 | |||
| P03 |-- P4 | |||
A0 --| A0 P04 |-- P5 | |||
A1 --| A1 P05 |-- P6 | |||
A2 --| A2 P06 |-- P7 | |||
| P07 |-- P8 | |||
| | | |||
| P10 |-- P10 | |||
| P11 |-- P11 | |||
| P12 |-- P12 | |||
| P13 |-- P13 | |||
| P14 |-- P14 | |||
| P15 |-- P15 | |||
| P16 |-- P16 | |||
| P17 |-- P17 | |||
`----------' | |||
*/ | |||
#define PCA9555_PORT0 0 | |||
#define PCA9555_PORT1 1 | |||
#define ALL_OUTPUT 0 | |||
#define ALL_INPUT 0xFF | |||
#define ALL_LOW 0 | |||
#define ALL_HIGH 0xFF | |||
void pca9555_init(uint8_t slave_addr); | |||
void pca9555_set_config(uint8_t slave_addr, uint8_t port, uint8_t conf); | |||
void pca9555_set_output(uint8_t slave_addr, uint8_t port, uint8_t conf); | |||
uint8_t pca9555_readPins(uint8_t slave_addr, uint8_t port); |
@ -0,0 +1,23 @@ | |||
# XD84 | |||
![XD84](https://cdn.shopify.com/s/files/1/2711/4238/products/HTB17eeJSXXXXXbIXFXXq6xXFXXXp_1024x1024.jpg?v=1515505994) | |||
Compact With 84 Keys & RGB LED Underglow | |||
- Designed by Xiudi | |||
- Up to 87 keys | |||
- iso and ansi support | |||
- Uses Kimera core | |||
Keyboard Maintainer: QMK Community | |||
Hardware Supported: XD84 | |||
Hardware Availability: [KPrepublic](https://kprepublic.com/products/xd84-xiudi-70-custom-keyboard-pcb) | |||
Make example for this keyboard (after setting up your build environment): | |||
make xd84:default | |||
Install examples: | |||
make xd84:default:dfu | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,86 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = atmel-dfu | |||
# If you don't know the bootloader type, then you can specify the | |||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) | |||
# custom matrix setup | |||
CUSTOM_MATRIX = yes | |||
SRC = i2c_master.c custom_matrix_helper.c pca9555.c matrix.c | |||
LAYOUTS = 75_ansi 75_iso |
@ -0,0 +1,43 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "xd84.h" | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// put your per-action keyboard code here | |||
// runs for every action, just before processing by the firmware | |||
return process_record_user(keycode, record); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} |
@ -0,0 +1,59 @@ | |||
/* Copyright 2019 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define ____ KC_NO | |||
/* This a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT_75_ansi( \ | |||
K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ | |||
K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K216, \ | |||
K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K316, \ | |||
K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K414, K416, \ | |||
K501, K503, K504, K505, K506, K507, K508, K509, K510, K511, K512, K513, K515, K516, \ | |||
K601, K602, K603, K607, K611, K612, K613, K614, K615, K616 \ | |||
) { \ | |||
{ K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K116 }, \ | |||
{ K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K216 }, \ | |||
{ K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K316 }, \ | |||
{ K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, ____, K414, K416 }, \ | |||
{ K501, ____, K503, K504, K505, K506, K507, K508, K509, K510, K511, K512, K513, K515, K516 }, \ | |||
{ K601, K602, K603, ____, ____, K607, K115, ____, K613, ____, K611, K612, K614, K615, K616 } \ | |||
} | |||
#define LAYOUT_75_iso( \ | |||
K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ | |||
K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K216, \ | |||
K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K316, \ | |||
K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K414, K415, K416, \ | |||
K501, K502, K503, K504, K505, K506, K507, K508, K509, K510, K511, K512, K513, K515, K516, \ | |||
K601, K602, K603, K607, K611, K612, K613, K614, K615, K616 \ | |||
) { \ | |||
{ K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K116 }, \ | |||
{ K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K216 }, \ | |||
{ K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, K316 }, \ | |||
{ K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K414, K415, K416 }, \ | |||
{ K501, K502, K503, K504, K505, K506, K507, K508, K509, K510, K511, K512, K513, K515, K516 }, \ | |||
{ K601, K602, K603, ____, ____, K607, K115, ____, K613, ____, K611, K612, K614, K615, K616 } \ | |||
} |