Updated to fulfill PR checklist.

keyboards/b_sides/rev41lp/config.h

@@ -39,65 +39,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PIN B6
 #define BACKLIGHT_ON_STATE 1
-// #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 7
 #define BACKLIGHT_LIMIT_VAL 150
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-// #define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-// #define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/b_sides/rev41lp/keymaps/cyril/config.h

@@ -1,5 +1,19 @@
-#define TAPPING_TERM 150 
+/*
+Copyright 2021 @cyril279
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#define TAPPING_TERM 150
 #define TAPPING_TERM_PER_KEY
-//#define PERMISSIVE_HOLD
 #define IGNORE_MOD_TAP_INTERRUPT
-//#define TAPPING_FORCE_HOLD

keyboards/b_sides/rev41lp/keymaps/cyril/keymap.c

@@ -1,18 +1,19 @@
-/* Copyright 2021 cyril279
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2021 @cyril279
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #include QMK_KEYBOARD_H
 
 enum layer_names {
@@ -96,8 +97,6 @@ uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
         case RALT_L:
         case LCTL_F:
         case RCTL_J:
-//        case KC_SFTENT:
-//        case RSFT_K: // too long at 225
         case SPC_NAV:
             return 225;
         default:

keyboards/b_sides/rev41lp/keymaps/default/keymap.c

@@ -1,18 +1,19 @@
-/* Copyright 2021 cyril279
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2021 @cyril279
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -22,14 +23,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,      KC_B,               KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  RSFT_T(KC_ENT),
                                             KC_LALT,   MO(1),    KC_SPC,   MO(2),    KC_LGUI
   ),
-  
+
   [1] = LAYOUT_rev41lp(
     _______,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,    KC_PERC,            KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  KC_DEL,
     _______,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,   KC_PIPE,            KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  KC_GRV,   KC_TILD,
     _______,  KC_ESC,   KC_LGUI,  KC_LALT,  KC_CAPS,   KC_DQUO,            KC_HOME,  KC_END,   KC_PGUP,  KC_PGDN,  KC_PSCR,  RSFT_T(KC_SPC),
                                             _______,   _______,  KC_ENT,   MO(3),  _______
   ),
-  
+
   [2] = LAYOUT_rev41lp(
     _______,  KC_1,     KC_2,     KC_3,     KC_4,      KC_5,               KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_DEL,
     _______,  KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,   KC_BSLS,            KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,

keyboards/b_sides/rev41lp/keymaps/namnlos/README.md

@@ -1,3 +1,3 @@
 # Namnlos custom keymap for Rev41lp
 
-This is a nordic keymap for the R41lp by [cyril](https://github.com/cyril279), it closely follows the default keymap with customisations for nordic languages.
+This is a nordic keymap for the Rev41lp by [cyril](https://github.com/cyril279), it's based on the default keymap but has customisations for nordic languages.

keyboards/b_sides/rev41lp/keymaps/namnlos/config.h

@@ -15,27 +15,29 @@
  */
 #pragma once
 
-#include "config_common.h"
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
-    get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
-)
-
-#define LAYER_STATE_8BIT
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
-#define NO_ACTION_ONESHOT
+#undef BACKLIGHT_LEVELS
+#define BACKLIGHT_LEVELS 11
+#undef BACKLIGHT_LIMIT_VAL
+#define BACKLIGHT_LIMIT_VAL 255
+#define BACKLIGHT_DEFAULT_LEVEL 3
 
 #define COMBO_COUNT 3
-#define UNICODE_SELECTED_MODES UC_WINC, UC_WIN, UC_MAC, UC_LNX
 #define IGNORE_MOD_TAP_INTERRUPT
 
+#define UNICODE_SELECTED_MODES UC_WINC, UC_WIN, UC_MAC, UC_LNX
+
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 200
 #define TAPPING_TERM_PER_KEY
 
+#define LAYER_STATE_8BIT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+#define NO_ACTION_ONESHOT
+
 /* Bootmagic Lite key configuration */
 #define BOOTMAGIC_LITE_ROW 0
 #define BOOTMAGIC_LITE_COLUMN 0
+
+/* key combination for command */
+#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)))

keyboards/b_sides/rev41lp/keymaps/namnlos/keymap.c

@@ -25,7 +25,6 @@ enum layer_names {
     _ADJUST
 };
 
-// Custom keycodes for send_string-stuff.
 enum custom_keycodes {
     SK_NOT_EQL = SAFE_RANGE,
     SK_LEQ,
@@ -37,19 +36,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
         case SK_NOT_EQL:
             if (record->event.pressed) {
-                // when keycode is pressed
                 SEND_STRING("!=");
             }
             break;
         case SK_LEQ:
             if (record->event.pressed) {
-                // when keycode is pressed
                 SEND_STRING("<=");
             }
             break;
         case SK_GEQ:
             if (record->event.pressed) {
-                // when keycode is pressed
                 SEND_STRING(">=");
             }
             break;
@@ -125,53 +121,49 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 
 // Some defines for the keys below
 #define CK_ESC LT(_RAISE, KC_ESC)
-#define CK_BSPC MT(MOD_LCTL, KC_BSPC)
-#define CK_DEL MT(MOD_LALT, KC_DEL)
+#define CK_BSPC LCTL_T(KC_BSPC)
+#define CK_DEL LALT_T(KC_DEL)
 #define CK_ENT1 LT(_LOWER, KC_ENT)
 #define CK_ENT2 LT(_RAISE, KC_ENT)
-#define CK_TAB MT(MOD_RALT, KC_TAB)
-#define CK_ADIA MT(MOD_RCTL, SE_ADIA)
-#define CK_QUOT MT(MOD_RSFT, SE_QUOT)
+#define CK_TAB RALT_T(KC_TAB)
+#define CK_ADIA RCTL_T(SE_ADIA)
+#define CK_QUOT RSFT_T(SE_QUOT)
+#define CK_SPC RSFT_T(KC_SPC)
 
 #ifdef UNICODE_ENABLE
-#    define EM_DASH 0x2014
-#    define EN_DASH 0x2013
-#    define CK_ENDASH UC(EN_DASH)
-#    define CK_EMDASH UC(EM_DASH)
+#    define CK_NDASH UC(0x2013)
+#    define CK_MDASH UC(0x2014)
 #else
-#    define CK_ENDASH KC_TRNS
-#    define CK_EMDASH KC_TRNS
+#    define CK_NDASH KC_TRNS
+#    define CK_MDASH KC_TRNS
 #endif
-#define LOWER  MO(_LOWER)
-#define RAISE  MO(_RAISE)
-#define ADJUST MO(_ADJUST)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = LAYOUT_rev41lp(
-    CK_ESC,   KC_Q,     KC_W,     KC_E,     KC_R,      KC_T,               KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     SE_ARNG,
-    CK_BSPC,  KC_A,     KC_S,     KC_D,     KC_F,      KC_G,               KC_H,     KC_J,     KC_K,     KC_L,     SE_ODIA,  CK_ADIA,
-    CK_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,      KC_B,               KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  CK_QUOT,
-                                            CK_DEL, CK_ENT1,   KC_SPC, CK_ENT2,     CK_TAB
+    CK_ESC,   KC_Q,     KC_W,     KC_E,     KC_R,      KC_T,               KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  SE_ARNG,
+    CK_BSPC,  KC_A,     KC_S,     KC_D,     KC_F,      KC_G,               KC_H,     KC_J,     KC_K,     KC_L,  SE_ODIA,  CK_ADIA,
+    CK_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,      KC_B,               KC_N,     KC_M,  SE_COMM,   SE_DOT,  SE_MINS,  CK_QUOT,
+                                          CK_DEL,   CK_ENT1,  KC_SPC,   CK_ENT2,   CK_TAB
   ),
 
   [_LOWER] = LAYOUT_rev41lp(
- SK_NOT_EQL,  SE_EXLM,  SE_AT,    SE_HASH,  SE_DLR,    SE_PERC,            SE_CIRC,  SE_AMPR,  SE_ASTR,  SE_LPRN,  SE_RPRN,  KC_DEL,
-     SK_LEQ,  SE_UNDS,  SE_PLUS,  SE_LCBR,  SE_RCBR,   SE_PIPE,            KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  SE_GRV,   SE_TILD,
-     SK_GEQ,  KC_ESC,   KC_LGUI,  KC_LALT,  KC_CAPS,   SE_DQUO,            KC_HOME,  KC_END,   KC_PGUP,  KC_PGDN,  KC_PSCR,  RSFT_T(KC_SPC),
+ SK_NOT_EQL,  SE_EXLM,    SE_AT,  SE_HASH,   SE_DLR,   SE_PERC,            SE_CIRC,  SE_AMPR,  SE_ASTR,  SE_LPRN,  SE_RPRN,  CK_NDASH,
+     SK_LEQ,  SE_UNDS,  SE_PLUS,  SE_LCBR,  SE_RCBR,   SE_PIPE,            KC_LEFT,  KC_DOWN,    KC_UP,  KC_RGHT,   SE_GRV,   SE_TILD,
+     SK_GEQ,   KC_ESC,  KC_LGUI,  KC_LALT,  KC_CAPS,   SE_DQUO,            KC_HOME,   KC_END,  KC_PGUP,  KC_PGDN,  KC_PSCR,    CK_SPC,
                                             _______,   _______,  KC_ENT,   _______,  _______
   ),
 
   [_RAISE] = LAYOUT_rev41lp(
-    _______,  SE_1,     SE_2,     SE_3,     SE_4,      SE_5,               SE_6,     SE_7,     SE_8,     SE_9,     SE_0,     KC_DEL,
-    _______,  SE_MINS,  SE_EQL,   SE_LBRC,  SE_RBRC,   SE_BSLS,            KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,
-    _______,  KC_ESC,   KC_RGUI,  KC_RALT,  KC_CAPS,   KC_QUOT,            KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,
-                                            SE_LABK,   SE_RABK, KC_BSPC, _______,  _______
+    _______,     SE_1,     SE_2,     SE_3,     SE_4,      SE_5,               SE_6,   SE_7,   SE_8,    SE_9,    SE_0,  CK_MDASH,
+    _______,  SE_MINS,   SE_EQL,  SE_LBRC,  SE_RBRC,   SE_BSLS,              KC_F1,  KC_F2,  KC_F3,   KC_F4,   KC_F5,     KC_F6,
+    _______,   KC_ESC,  KC_RGUI,  KC_RALT,  KC_CAPS,   KC_QUOT,              KC_F7,  KC_F8,  KC_F9,  KC_F10,  KC_F11,    KC_F12,
+                                            SE_LABK,   SE_RABK,  KC_BSPC,  _______,  _______
   ),
 
   [_ADJUST] = LAYOUT_rev41lp(
-    XXXXXXX,   XXXXXXX, XXXXXXX,  XXXXXXX,   BL_DEC,   BL_TOGG,            BL_BRTG,   BL_INC,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
-    XXXXXXX,   XXXXXXX, XXXXXXX,  XXXXXXX,  XXXXXXX,   XXXXXXX,            XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
-    XXXXXXX,   XXXXXXX, XXXXXXX,  XXXXXXX,  XXXXXXX,   XXXXXXX,            RESET,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+    XXXXXXX,   XXXXXXX, XXXXXXX,   BL_OFF,   BL_DEC,   BL_TOGG,            BL_BRTG,   BL_INC,    BL_ON,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+    XXXXXXX,   XXXXXXX, XXXXXXX,  XXXXXXX,  XXXXXXX,   BL_STEP,            XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+    XXXXXXX,   UC_M_WC, UC_M_MA,  UC_M_LN,  XXXXXXX,   XXXXXXX,            RESET,    XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
                                                _______, _______, _______,  _______,  _______
   )
 };

keyboards/b_sides/rev41lp/keymaps/namnlos/rules.mk

@@ -5,33 +5,33 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 # Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no       # Mouse keys
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+SLEEP_LED_ENABLE = yes      # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = yes        # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+OLED_ENABLE = no            # Enable OLED screen support
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 TAP_DANCE_ENABLE = yes      # Let's dance
 COMBO_ENABLE = no           # Combos
 SPACE_CADET_ENABLE = no
 GRAVE_ESC_ENABLE = no
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
-LTO_ENABLE      = yes
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+BACKLIGHT_DRIVER = pwm
+
+DEBOUNCE_TYPE = sym_defer_pk
 
-DEBOUNCE_TYPE = sym_eager_pr
+LTO_ENABLE      = yes
 EXTRAFLAGS += -flto
 
 #Debug options
-VERBOSE 		 = no
+VERBOSE = no

keyboards/b_sides/rev41lp/rev41lp.c

@@ -1,51 +1,17 @@
-/* Copyright 2019 gtips
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "rev41lp.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
 /*
+Copyright 2021 @cyril279
 
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
 
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
 
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+#include "rev41lp.h"

keyboards/b_sides/rev41lp/rev41lp.h

@@ -1,18 +1,19 @@
-/* Copyright 2021 @cyril279
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+/*
+Copyright 2021 @cyril279
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
 #pragma once
 
 #include "quantum.h"