@ -0,0 +1,253 @@ | |||
/* | |||
Copyright 2021 cyril279 | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x5F10 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER cyril279 | |||
#define PRODUCT rev41lp | |||
#define DESCRIPTION A 41-key keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 7 | |||
#define MATRIX_COLS 6 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { F4, B2, F5, B3, F6, B1, F7 } | |||
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||
#define BACKLIGHT_PIN B6 | |||
#define BACKLIGHT_ON_STATE 1 | |||
// #define BACKLIGHT_BREATHING | |||
#define BACKLIGHT_LEVELS 7 | |||
#define BACKLIGHT_LIMIT_VAL 150 | |||
// #define RGB_DI_PIN E2 | |||
// #ifdef RGB_DI_PIN | |||
// #define RGBLED_NUM 16 | |||
// #define RGBLIGHT_HUE_STEP 8 | |||
// #define RGBLIGHT_SAT_STEP 8 | |||
// #define RGBLIGHT_VAL_STEP 8 | |||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
// /*== all animations enable ==*/ | |||
// #define RGBLIGHT_ANIMATIONS | |||
// /*== or choose animations ==*/ | |||
// #define RGBLIGHT_EFFECT_BREATHING | |||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
// #define RGBLIGHT_EFFECT_SNAKE | |||
// #define RGBLIGHT_EFFECT_KNIGHT | |||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||
// /*== customize breathing effect ==*/ | |||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
// /*==== use exp() and sin() ====*/ | |||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
// #endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
/* defined by default; to change, uncomment and set to the combination you want */ | |||
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP H | |||
//#define MAGIC_KEY_HELP_ALT SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER0_ALT GRAVE | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER B | |||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
/* | |||
* HD44780 LCD Display Configuration | |||
*/ | |||
/* | |||
#define LCD_LINES 2 //< number of visible lines of the display | |||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||
#if LCD_IO_MODE | |||
#define LCD_PORT PORTB //< port for the LCD lines | |||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||
#define LCD_RS_PIN 3 //< pin for RS line | |||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||
#define LCD_RW_PIN 2 //< pin for RW line | |||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||
#define LCD_E_PIN 1 //< pin for Enable line | |||
#endif | |||
*/ | |||
/* Bootmagic Lite key configuration */ | |||
// #define BOOTMAGIC_LITE_ROW 0 | |||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,60 @@ | |||
{ | |||
"keyboard_name": "rev41lp", | |||
"url": "", | |||
"maintainer": "cyril279", | |||
"width": 13, | |||
"height": 4.54, | |||
"layouts": { | |||
"LAYOUT_rev41lp": { | |||
"layout": [ | |||
{"label":"K00", "x":0, "y":0.54}, | |||
{"label":"K01", "x":1, "y":0.36}, | |||
{"label":"K02", "x":2, "y":0.18}, | |||
{"label":"K03", "x":3, "y":0}, | |||
{"label":"K04", "x":4, "y":0.18}, | |||
{"label":"K05", "x":5, "y":0.36}, | |||
{"label":"K10", "x":7, "y":0.36}, | |||
{"label":"K11", "x":8, "y":0.18}, | |||
{"label":"K12", "x":9, "y":0}, | |||
{"label":"K13", "x":10, "y":0.18}, | |||
{"label":"K14", "x":11, "y":0.36}, | |||
{"label":"K15", "x":12, "y":0.54}, | |||
{"label":"K20", "x":0, "y":1.54}, | |||
{"label":"K21", "x":1, "y":1.36}, | |||
{"label":"K22", "x":2, "y":1.18}, | |||
{"label":"K23", "x":3, "y":1}, | |||
{"label":"K24", "x":4, "y":1.18}, | |||
{"label":"K25", "x":5, "y":1.36}, | |||
{"label":"K30", "x":7, "y":1.36}, | |||
{"label":"K31", "x":8, "y":1.18}, | |||
{"label":"K32", "x":9, "y":1}, | |||
{"label":"K33", "x":10, "y":1.18}, | |||
{"label":"K34", "x":11, "y":1.36}, | |||
{"label":"K35", "x":12, "y":1.54}, | |||
{"label":"K40", "x":0, "y":2.54}, | |||
{"label":"K41", "x":1, "y":2.36}, | |||
{"label":"K42", "x":2, "y":2.18}, | |||
{"label":"K43", "x":3, "y":2}, | |||
{"label":"K44", "x":4, "y":2.18}, | |||
{"label":"K45", "x":5, "y":2.36}, | |||
{"label":"K50", "x":7, "y":2.36}, | |||
{"label":"K51", "x":8, "y":2.18}, | |||
{"label":"K52", "x":9, "y":2}, | |||
{"label":"K53", "x":10, "y":2.18}, | |||
{"label":"K54", "x":11, "y":2.36}, | |||
{"label":"K55", "x":12, "y":2.54}, | |||
{"label":"K60", "x":2.875, "y":3.54, "w":1.25}, | |||
{"label":"K61", "x":4.125, "y":3.54, "w":1.25}, | |||
{"label":"K62", "x":5.375, "y":3.54, "w":2.25}, | |||
{"label":"K63", "x":7.625, "y":3.54, "w":1.25}, | |||
{"label":"K64", "x":8.875, "y":3.54, "w":1.25} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,5 @@ | |||
#define TAPPING_TERM 150 | |||
#define TAPPING_TERM_PER_KEY | |||
//#define PERMISSIVE_HOLD | |||
#define IGNORE_MOD_TAP_INTERRUPT | |||
//#define TAPPING_FORCE_HOLD |
@ -0,0 +1,129 @@ | |||
/* Copyright 2021 cyril279 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layer_names { | |||
_BASE, | |||
_LOWER, | |||
_RAISE, | |||
_ADJUST, | |||
_NAVIG | |||
}; | |||
enum custom_keycodes { | |||
CTLESC, | |||
SFTCAP | |||
}; | |||
#define LOWER MO(_LOWER) | |||
#define RAISE MO(_RAISE) | |||
#define ADJUST MO(_ADJUST) | |||
#define SPC_NAV LT(_NAVIG,KC_SPC) | |||
#define SFT_CAP MT(MOD_LSFT, KC_CAPS) | |||
#define LGUI_A LGUI_T(KC_A) | |||
#define LALT_S LALT_T(KC_S) | |||
#define LSFT_D LSFT_T(KC_D) | |||
#define LCTL_F LCTL_T(KC_F) | |||
#define RCTL_J RCTL_T(KC_J) | |||
#define RSFT_K RSFT_T(KC_K) | |||
#define RALT_L LALT_T(KC_L) | |||
#define RGUI_SCLN RGUI_T(KC_SCLN) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT_rev41lp( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_ESC, LGUI_A, LALT_S, LSFT_D, LCTL_F, KC_G, KC_H, RCTL_J, RSFT_K, RALT_L, RGUI_SCLN, KC_QUOT, | |||
SFT_CAP, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SFTENT, | |||
KC_LALT, LOWER, SPC_NAV, RAISE, KC_LGUI | |||
), | |||
[_LOWER] = LAYOUT_rev41lp( | |||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, | |||
KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, | |||
_______, _______, _______, _______, _______ | |||
), | |||
[_RAISE] = LAYOUT_rev41lp( | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_CAPS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, | |||
_______, _______, _______, _______, _______ | |||
), | |||
[_NAVIG] = LAYOUT_rev41lp( | |||
KC_DEL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_DEL, | |||
_______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, | |||
_______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, | |||
_______, _______, _______, _______, _______ | |||
), | |||
[_ADJUST] = LAYOUT_rev41lp( | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC, RGB_TOG, BL_BRTG, BL_INC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, | |||
_______, _______, _______, _______, _______ | |||
) | |||
}; | |||
layer_state_t layer_state_set_user(layer_state_t state) { | |||
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
static uint16_t modclick_timer; | |||
switch (keycode) { | |||
case CTLESC: | |||
if(record->event.pressed) { | |||
modclick_timer = timer_read(); | |||
register_code(KC_LCTL); // Change the key to be held here | |||
} else { | |||
unregister_code(KC_LCTL); // Change the key that was held here, too! | |||
if (timer_elapsed(modclick_timer) < TAPPING_TERM) { | |||
SEND_STRING(SS_TAP(X_ESCAPE)); // Change the character(s) to be sent on tap here | |||
} | |||
} return false; // We handled this keypress | |||
case SFTCAP: | |||
if(record->event.pressed) { | |||
modclick_timer = timer_read(); | |||
register_code(KC_LSFT); // Change the key to be held here | |||
} else { | |||
unregister_code(KC_LSFT); // Change the key that was held here, too! | |||
if (timer_elapsed(modclick_timer) < TAPPING_TERM) { | |||
SEND_STRING(SS_TAP(X_CAPS)); // Change the character(s) to be sent on tap here | |||
} | |||
} return false; // We handled this keypress | |||
} | |||
return true; // We didn't handle other keypresses | |||
} | |||
uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case CTLESC: | |||
case SFTCAP: | |||
return 75; | |||
case LGUI_A: | |||
case RGUI_SCLN: | |||
case LALT_S: | |||
case RALT_L: | |||
// case RSFT_K: // too long at 225 | |||
case SPC_NAV: | |||
return 225; | |||
default: | |||
return TAPPING_TERM; | |||
} | |||
} |
@ -0,0 +1,61 @@ | |||
/* Copyright 2021 cyril279 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layer_names { | |||
_BASE, | |||
_LOWER, | |||
_RAISE, | |||
_ADJUST | |||
}; | |||
#define LOWER MO(_LOWER) | |||
#define RAISE MO(_RAISE) | |||
#define ADJUST MO(_ADJUST) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT_rev41lp( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_ENT), | |||
KC_LALT, LOWER, KC_SPC, RAISE, KC_LGUI | |||
), | |||
[_LOWER] = LAYOUT_rev41lp( | |||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, | |||
_______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_GRV, KC_TILD, | |||
_______, KC_ESC, KC_LGUI, KC_LALT, KC_CAPS, KC_DQUO, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_PSCR, RSFT_T(KC_SPC), | |||
_______, _______, KC_ENT, _______, _______ | |||
), | |||
[_RAISE] = LAYOUT_rev41lp( | |||
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, | |||
_______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, | |||
_______, KC_ESC, KC_RGUI, KC_RALT, KC_CAPS, KC_QUOT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, | |||
_______, _______, KC_BSPC, _______, _______ | |||
), | |||
[_ADJUST] = LAYOUT_rev41lp( | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, BL_DEC, BL_TOGG, BL_BRTG, BL_INC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, | |||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, | |||
_______, _______, _______, _______, _______ | |||
) | |||
}; | |||
layer_state_t layer_state_set_user(layer_state_t state) { | |||
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); | |||
} |
@ -0,0 +1,15 @@ | |||
# rev39lp | |||
![rev41lp] | |||
Inspired by the REVIUNG series by Gtips, the rev41lp is 41-key column staggered keyboard designed for use with low-profile pg1350 switches. | |||
Keyboard Maintainer: [cyril](https://github.com/cyril279) | |||
Hardware Supported: The REVlp PCBs, Pro Micro supported, bluetooth controller friendly. | |||
Hardware Availability: [PCB Data](https://github.com/cyril279/keyboards/tree/main/revlp) | |||
Make example for this keyboard (after setting up your build environment): | |||
make revlp41:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,51 @@ | |||
/* Copyright 2019 gtips | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "rev41lp.h" | |||
// Optional override functions below. | |||
// You can leave any or all of these undefined. | |||
// These are only required if you want to perform custom actions. | |||
/* | |||
void matrix_init_kb(void) { | |||
// put your keyboard start-up code here | |||
// runs once when the firmware starts up | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// put your per-action keyboard code here | |||
// runs for every action, just before processing by the firmware | |||
return process_record_user(keycode, record); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||
led_set_user(usb_led); | |||
} | |||
*/ |
@ -0,0 +1,42 @@ | |||
/* Copyright 2021 cyril279 | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT_rev41lp( \ | |||
K00, K01, K02, K03, K04, K05, K10, K11, K12, K13, K14, K15, \ | |||
K20, K21, K22, K23, K24, K25, K30, K31, K32, K33, K34, K35, \ | |||
K40, K41, K42, K43, K44, K45, K50, K51, K52, K53, K54, K55, \ | |||
K60, K61, K62, K63, K64 \ | |||
) \ | |||
{ \ | |||
{ K00, K01, K02, K03, K04, K05 }, \ | |||
{ K10, K11, K12, K13, K14, K15 }, \ | |||
{ K20, K21, K22, K23, K24, K25 }, \ | |||
{ K30, K31, K32, K33, K34, K35 }, \ | |||
{ K40, K41, K42, K43, K44, K45 }, \ | |||
{ K50, K51, K52, K53, K54, K55 }, \ | |||
{ K60, K61, K62, K63, K64, KC_NO } \ | |||
} |
@ -0,0 +1,33 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = qmk-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs |