* preliminary checkin for facew keyboard * Update readme file * put the standard 60 ansi layout in * update rules to have LAYOUT_60_ansi to use my userspace layoutspull/2938/merge
@ -0,0 +1,49 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef FACEW_CONFIG_H | |||||
#define FACEW_CONFIG_H | |||||
#include "config_common.h" | |||||
#define VENDOR_ID 0x20A0 | |||||
#define PRODUCT_ID 0x422D | |||||
#define MANUFACTURER NotActuallyWinkeyless | |||||
#define PRODUCT facew | |||||
#define RGBLED_NUM 16 | |||||
#define MATRIX_ROWS 8 | |||||
#define MATRIX_COLS 11 | |||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } | |||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6} | |||||
#define UNUSED_PINS | |||||
#define DIODE_DIRECTION COL2ROW | |||||
#define DEBOUNCING_DELAY 5 | |||||
#define NO_BACKLIGHT_CLOCK | |||||
#define BACKLIGHT_LEVELS 1 | |||||
#define RGBLIGHT_ANIMATIONS | |||||
#define NO_UART 1 | |||||
/* key combination for command */ | |||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) | |||||
#endif |
@ -0,0 +1,66 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "facew.h" | |||||
#ifdef BACKLIGHT_ENABLE | |||||
#include "backlight.h" | |||||
#endif | |||||
#ifdef RGBLIGHT_ENABLE | |||||
#include "rgblight.h" | |||||
#endif | |||||
#include <avr/pgmspace.h> | |||||
#include "action_layer.h" | |||||
#include "i2c.h" | |||||
#include "quantum.h" | |||||
#ifdef RGBLIGHT_ENABLE | |||||
extern rgblight_config_t rgblight_config; | |||||
void rgblight_set(void) { | |||||
if (!rgblight_config.enable) { | |||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||||
led[i].r = 0; | |||||
led[i].g = 0; | |||||
led[i].b = 0; | |||||
} | |||||
} | |||||
i2c_init(); | |||||
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); | |||||
} | |||||
#endif | |||||
__attribute__ ((weak)) | |||||
void matrix_scan_user(void) { | |||||
} | |||||
void backlight_init_ports(void) { | |||||
DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); | |||||
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); | |||||
} | |||||
void backlight_set(uint8_t level) { | |||||
if (level == 0) { | |||||
// Turn out the lights | |||||
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); | |||||
} else { | |||||
// Turn on the lights | |||||
PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); | |||||
} | |||||
} |
@ -0,0 +1,57 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#ifndef FACEW_H | |||||
#define FACEW_H | |||||
#include "quantum.h" | |||||
#define LAYOUT_all( \ | |||||
K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K10, K60,\ | |||||
K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \ | |||||
K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \ | |||||
K19, K13, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, K50,\ | |||||
K09, K00, K39, K30, K59, K69, K57, K29\ | |||||
){ \ | |||||
{ KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \ | |||||
{ KC_NO, K11, K12, K13, K14, K15, K16, KC_NO, K18, K19, K10}, \ | |||||
{ KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \ | |||||
{ KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, K50}, \ | |||||
{ KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \ | |||||
{ KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \ | |||||
} | |||||
#define LAYOUT_60_ansi( \ | |||||
K61, K71, K72, K73, K74, K64, K65, K75, K76, K77, K78, K68, K66, K60,\ | |||||
K11, K01, K02, K03, K04, K14, K15, K05, K06, K07, K08, K18, K16, K20, \ | |||||
K12, K21, K22, K23, K24, K34, K35, K25, K26, K27, K28, K38, K40, \ | |||||
K19, K41, K42, K43, K44, K54, K55, K45, K46, K47, K58, K49, \ | |||||
K09, K00, K39, K30, K59, K69, K57, K29\ | |||||
){ \ | |||||
{ KC_NO, K01, K02, K03, K04, K05, K06, K07, K08, K09, K00}, \ | |||||
{ KC_NO, K11, K12, KC_NO, K14, K15, K16, KC_NO, K18, K19, KC_NO}, \ | |||||
{ KC_NO, K21, K22, K23, K24, K25, K26, K27, K28, K29, K20}, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K34, K35, KC_NO, KC_NO, K38, K39, K30}, \ | |||||
{ KC_NO, K41, K42, K43, K44, K45, K46, K47, KC_NO, K49, K40}, \ | |||||
{ KC_NO, KC_NO, KC_NO, KC_NO, K54, K55, KC_NO, K57, K58, K59, KC_NO}, \ | |||||
{ KC_NO, K61, KC_NO, KC_NO, K64, K65, K66, KC_NO, K68, K69, K60}, \ | |||||
{ KC_NO, K71, K72, K73, K74, K75, K76, K77, K78, KC_NO, KC_NO}, \ | |||||
} | |||||
#endif |
@ -0,0 +1,106 @@ | |||||
/* | |||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
// Please do not modify this file | |||||
#include <avr/io.h> | |||||
#include <util/twi.h> | |||||
#include "i2c.h" | |||||
void i2c_set_bitrate(uint16_t bitrate_khz) { | |||||
uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); | |||||
if (bitrate_div >= 16) { | |||||
bitrate_div = (bitrate_div - 16) / 2; | |||||
} | |||||
TWBR = bitrate_div; | |||||
} | |||||
void i2c_init(void) { | |||||
// set pull-up resistors on I2C bus pins | |||||
PORTC |= 0b11; | |||||
i2c_set_bitrate(400); | |||||
// enable TWI (two-wire interface) | |||||
TWCR |= (1 << TWEN); | |||||
// enable TWI interrupt and slave address ACK | |||||
TWCR |= (1 << TWIE); | |||||
TWCR |= (1 << TWEA); | |||||
} | |||||
uint8_t i2c_start(uint8_t address) { | |||||
// reset TWI control register | |||||
TWCR = 0; | |||||
// begin transmission and wait for it to end | |||||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); | |||||
while (!(TWCR & (1<<TWINT))); | |||||
// check if the start condition was successfully transmitted | |||||
if ((TWSR & 0xF8) != TW_START) { | |||||
return 1; | |||||
} | |||||
// transmit address and wait | |||||
TWDR = address; | |||||
TWCR = (1<<TWINT) | (1<<TWEN); | |||||
while (!(TWCR & (1<<TWINT))); | |||||
// check if the device has acknowledged the READ / WRITE mode | |||||
uint8_t twst = TW_STATUS & 0xF8; | |||||
if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { | |||||
return 1; | |||||
} | |||||
return 0; | |||||
} | |||||
void i2c_stop(void) { | |||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); | |||||
} | |||||
uint8_t i2c_write(uint8_t data) { | |||||
TWDR = data; | |||||
// transmit data and wait | |||||
TWCR = (1<<TWINT) | (1<<TWEN); | |||||
while (!(TWCR & (1<<TWINT))); | |||||
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { | |||||
return 1; | |||||
} | |||||
return 0; | |||||
} | |||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { | |||||
if (i2c_start(address)) { | |||||
return 1; | |||||
} | |||||
for (uint16_t i = 0; i < length; i++) { | |||||
if (i2c_write(data[i])) { | |||||
return 1; | |||||
} | |||||
} | |||||
i2c_stop(); | |||||
return 0; | |||||
} |
@ -0,0 +1,27 @@ | |||||
/* | |||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
// Please do not modify this file | |||||
#ifndef __I2C_H__ | |||||
#define __I2C_H__ | |||||
void i2c_init(void); | |||||
void i2c_set_bitrate(uint16_t bitrate_khz); | |||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); | |||||
#endif |
@ -0,0 +1,16 @@ | |||||
{ | |||||
"keyboard_name": "FaceW", | |||||
"url": "", | |||||
"maintainer": "qmk", | |||||
"width": 15, | |||||
"height": 5, | |||||
"layouts": { | |||||
"LAYOUT_all": { | |||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] | |||||
}, | |||||
"LAYOUT_60_ansi": { | |||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,43 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL | |||||
), | |||||
[1] = LAYOUT_all( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_DEL, | |||||
MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, MO(2), | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
[2] = LAYOUT_all( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; | |||||
@ -0,0 +1,51 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, TG(2), | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, MO(1), KC_RALT, KC_RGUI, KC_RCTL | |||||
), | |||||
[1] = LAYOUT_all( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
MO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
[2] = LAYOUT_all( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT | |||||
), | |||||
[3] = LAYOUT_all( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; | |||||
@ -0,0 +1,18 @@ | |||||
MechMerlin's FaceW Sprit Edition Layout | |||||
====================== | |||||
This is the preferred 60% layout used by u/merlin36, host of the [MechMerlin YouTube channel](www.youtube.com/mechmerlin). | |||||
## Keyboard Notes | |||||
- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com) | |||||
- Uses ps2avru instead of ps2avrgb | |||||
- To put in reset mode hold `q` while inserting the USB cable | |||||
- Use flashing instructions from ps2avrgb QMK port | |||||
## Keymap Notes | |||||
- Does not support any form of inswitch lighting as Merlin hates them. | |||||
- Arrow toggle switch to the right of right shift | |||||
- Reset is FN + Left Shift + R | |||||
### Build | |||||
To build this keymap, simply run `make facew:mechmerlin` from the qmk_firmware directory. |
@ -0,0 +1,106 @@ | |||||
/* | |||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include <avr/io.h> | |||||
#include <util/delay.h> | |||||
#include "matrix.h" | |||||
#ifndef DEBOUNCE | |||||
#define DEBOUNCE 5 | |||||
#endif | |||||
static uint8_t debouncing = DEBOUNCE; | |||||
static matrix_row_t matrix[MATRIX_ROWS]; | |||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; | |||||
void matrix_init(void) { | |||||
// all outputs for rows high | |||||
DDRB = 0xFF; | |||||
PORTB = 0xFF; | |||||
// all inputs for columns | |||||
DDRA = 0x00; | |||||
DDRC &= ~(0x111111<<2); | |||||
DDRD &= ~(1<<PIND7); | |||||
// all columns are pulled-up | |||||
PORTA = 0xFF; | |||||
PORTC |= (0b111111<<2); | |||||
PORTD |= (1<<PIND7); | |||||
// initialize matrix state: all keys off | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
matrix[row] = 0x00; | |||||
matrix_debouncing[row] = 0x00; | |||||
} | |||||
} | |||||
void matrix_set_row_status(uint8_t row) { | |||||
DDRB = (1 << row); | |||||
PORTB = ~(1 << row); | |||||
} | |||||
uint8_t bit_reverse(uint8_t x) { | |||||
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); | |||||
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); | |||||
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); | |||||
return x; | |||||
} | |||||
uint8_t matrix_scan(void) { | |||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { | |||||
matrix_set_row_status(row); | |||||
_delay_us(5); | |||||
matrix_row_t cols = ( | |||||
// cols 0..7, PORTA 0 -> 7 | |||||
(~PINA) & 0xFF | |||||
) | ( | |||||
// cols 8..13, PORTC 7 -> 0 | |||||
bit_reverse((~PINC) & 0xFF) << 8 | |||||
) | ( | |||||
// col 14, PORTD 7 | |||||
((~PIND) & (1 << PIND7)) << 7 | |||||
); | |||||
if (matrix_debouncing[row] != cols) { | |||||
matrix_debouncing[row] = cols; | |||||
debouncing = DEBOUNCE; | |||||
} | |||||
} | |||||
if (debouncing) { | |||||
if (--debouncing) { | |||||
_delay_ms(1); | |||||
} else { | |||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { | |||||
matrix[i] = matrix_debouncing[i]; | |||||
} | |||||
} | |||||
} | |||||
matrix_scan_user(); | |||||
return 1; | |||||
} | |||||
inline matrix_row_t matrix_get_row(uint8_t row) { | |||||
return matrix[row]; | |||||
} | |||||
void matrix_print(void) { | |||||
} |
@ -0,0 +1,24 @@ | |||||
# FaceW | |||||
A 60% no frills keyboard. | |||||
The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs | |||||
but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It | |||||
is designed and manufactured in Korea. It originally uses BootMapperClient for programming but | |||||
can now also use QMK. | |||||
Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin) | |||||
Hardware Supported: FaceW Sprit Edition PCB | |||||
Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352 | |||||
## Keyboard Notes | |||||
- The FaceW Sprit Edition can be purchased on [mechanicalkeyboards.com](www.mechanicalkeyboards.com) | |||||
- Uses ps2avru instead of ps2avrgb | |||||
- To put in reset mode hold `q` while inserting the USB cable | |||||
- When flashing, type `bootloadHID -r yourfile.hex` and wait awhile | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make facew:default | |||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,52 @@ | |||||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> | |||||
# | |||||
# This program is free software: you can redistribute it and/or modify | |||||
# it under the terms of the GNU General Public License as published by | |||||
# the Free Software Foundation, either version 2 of the License, or | |||||
# (at your option) any later version. | |||||
# | |||||
# This program is distributed in the hope that it will be useful, | |||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
# GNU General Public License for more details. | |||||
# | |||||
# You should have received a copy of the GNU General Public License | |||||
# along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
# MCU name | |||||
MCU = atmega32a | |||||
PROTOCOL = VUSB | |||||
# unsupported features for now | |||||
NO_UART = yes | |||||
NO_SUSPEND_POWER_DOWN = yes | |||||
# processor frequency | |||||
F_CPU = 12000000 | |||||
# Bootloader | |||||
# This definition is optional, and if your keyboard supports multiple bootloaders of | |||||
# different sizes, comment this out, and the correct address will be loaded | |||||
# automatically (+60). See bootloader.mk for all options. | |||||
BOOTLOADER = bootloadHID | |||||
# build options | |||||
BOOTMAGIC_ENABLE = yes | |||||
MOUSEKEY_ENABLE = yes | |||||
EXTRAKEY_ENABLE = yes | |||||
CONSOLE_ENABLE = yes | |||||
COMMAND_ENABLE = yes | |||||
BACKLIGHT_ENABLE = no | |||||
RGBLIGHT_ENABLE = no | |||||
RGBLIGHT_CUSTOM_DRIVER = yes | |||||
OPT_DEFS = -DDEBUG_LEVEL=0 | |||||
# custom matrix setup | |||||
CUSTOM_MATRIX = yes | |||||
SRC = matrix.c i2c.c | |||||
# programming options | |||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex | |||||
LAYOUTS = 60_ansi |
@ -0,0 +1,396 @@ | |||||
/* Name: usbconfig.h | |||||
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers | |||||
* Author: Christian Starkjohann | |||||
* Creation Date: 2005-04-01 | |||||
* Tabsize: 4 | |||||
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH | |||||
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) | |||||
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ | |||||
*/ | |||||
#ifndef __usbconfig_h_included__ | |||||
#define __usbconfig_h_included__ | |||||
#include "config.h" | |||||
/* | |||||
General Description: | |||||
This file is an example configuration (with inline documentation) for the USB | |||||
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is | |||||
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may | |||||
wire the lines to any other port, as long as D+ is also wired to INT0 (or any | |||||
other hardware interrupt, as long as it is the highest level interrupt, see | |||||
section at the end of this file). | |||||
*/ | |||||
/* ---------------------------- Hardware Config ---------------------------- */ | |||||
#define USB_CFG_IOPORTNAME D | |||||
/* This is the port where the USB bus is connected. When you configure it to | |||||
* "B", the registers PORTB, PINB and DDRB will be used. | |||||
*/ | |||||
#define USB_CFG_DMINUS_BIT 3 | |||||
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. | |||||
* This may be any bit in the port. | |||||
*/ | |||||
#define USB_CFG_DPLUS_BIT 2 | |||||
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. | |||||
* This may be any bit in the port. Please note that D+ must also be connected | |||||
* to interrupt pin INT0! [You can also use other interrupts, see section | |||||
* "Optional MCU Description" below, or you can connect D- to the interrupt, as | |||||
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the | |||||
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame | |||||
* markers every millisecond.] | |||||
*/ | |||||
#define USB_CFG_CLOCK_KHZ (F_CPU/1000) | |||||
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, | |||||
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code | |||||
* require no crystal, they tolerate +/- 1% deviation from the nominal | |||||
* frequency. All other rates require a precision of 2000 ppm and thus a | |||||
* crystal! | |||||
* Since F_CPU should be defined to your actual clock rate anyway, you should | |||||
* not need to modify this setting. | |||||
*/ | |||||
#define USB_CFG_CHECK_CRC 0 | |||||
/* Define this to 1 if you want that the driver checks integrity of incoming | |||||
* data packets (CRC checks). CRC checks cost quite a bit of code size and are | |||||
* currently only available for 18 MHz crystal clock. You must choose | |||||
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option. | |||||
*/ | |||||
/* ----------------------- Optional Hardware Config ------------------------ */ | |||||
/* #define USB_CFG_PULLUP_IOPORTNAME D */ | |||||
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of | |||||
* V+, you can connect and disconnect the device from firmware by calling | |||||
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). | |||||
* This constant defines the port on which the pullup resistor is connected. | |||||
*/ | |||||
/* #define USB_CFG_PULLUP_BIT 4 */ | |||||
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined | |||||
* above) where the 1.5k pullup resistor is connected. See description | |||||
* above for details. | |||||
*/ | |||||
/* --------------------------- Functional Range ---------------------------- */ | |||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 | |||||
/* Define this to 1 if you want to compile a version with two endpoints: The | |||||
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint | |||||
* number). | |||||
*/ | |||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 | |||||
/* Define this to 1 if you want to compile a version with three endpoints: The | |||||
* default control endpoint 0, an interrupt-in endpoint 3 (or the number | |||||
* configured below) and a catch-all default interrupt-in endpoint as above. | |||||
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. | |||||
*/ | |||||
#define USB_CFG_EP3_NUMBER 3 | |||||
/* If the so-called endpoint 3 is used, it can now be configured to any other | |||||
* endpoint number (except 0) with this macro. Default if undefined is 3. | |||||
*/ | |||||
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ | |||||
/* The above macro defines the startup condition for data toggling on the | |||||
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. | |||||
* Since the token is toggled BEFORE sending any data, the first packet is | |||||
* sent with the oposite value of this configuration! | |||||
*/ | |||||
#define USB_CFG_IMPLEMENT_HALT 0 | |||||
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature | |||||
* for endpoint 1 (interrupt endpoint). Although you may not need this feature, | |||||
* it is required by the standard. We have made it a config option because it | |||||
* bloats the code considerably. | |||||
*/ | |||||
#define USB_CFG_SUPPRESS_INTR_CODE 0 | |||||
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't | |||||
* want to send any data over them. If this macro is defined to 1, functions | |||||
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if | |||||
* you need the interrupt-in endpoints in order to comply to an interface | |||||
* (e.g. HID), but never want to send any data. This option saves a couple | |||||
* of bytes in flash memory and the transmit buffers in RAM. | |||||
*/ | |||||
#define USB_CFG_INTR_POLL_INTERVAL 1 | |||||
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll | |||||
* interval. The value is in milliseconds and must not be less than 10 ms for | |||||
* low speed devices. | |||||
*/ | |||||
#define USB_CFG_IS_SELF_POWERED 0 | |||||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the | |||||
* device is powered from the USB bus. | |||||
*/ | |||||
#define USB_CFG_MAX_BUS_POWER 500 | |||||
/* Set this variable to the maximum USB bus power consumption of your device. | |||||
* The value is in milliamperes. [It will be divided by two since USB | |||||
* communicates power requirements in units of 2 mA.] | |||||
*/ | |||||
#define USB_CFG_IMPLEMENT_FN_WRITE 1 | |||||
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out | |||||
* transfers. Set it to 0 if you don't need it and want to save a couple of | |||||
* bytes. | |||||
*/ | |||||
#define USB_CFG_IMPLEMENT_FN_READ 0 | |||||
/* Set this to 1 if you need to send control replies which are generated | |||||
* "on the fly" when usbFunctionRead() is called. If you only want to send | |||||
* data from a static buffer, set it to 0 and return the data from | |||||
* usbFunctionSetup(). This saves a couple of bytes. | |||||
*/ | |||||
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 | |||||
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. | |||||
* You must implement the function usbFunctionWriteOut() which receives all | |||||
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number | |||||
* can be found in 'usbRxToken'. | |||||
*/ | |||||
#define USB_CFG_HAVE_FLOWCONTROL 0 | |||||
/* Define this to 1 if you want flowcontrol over USB data. See the definition | |||||
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in | |||||
* usbdrv.h. | |||||
*/ | |||||
#define USB_CFG_DRIVER_FLASH_PAGE 0 | |||||
/* If the device has more than 64 kBytes of flash, define this to the 64 k page | |||||
* where the driver's constants (descriptors) are located. Or in other words: | |||||
* Define this to 1 for boot loaders on the ATMega128. | |||||
*/ | |||||
#define USB_CFG_LONG_TRANSFERS 0 | |||||
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes | |||||
* in a single control-in or control-out transfer. Note that the capability | |||||
* for long transfers increases the driver size. | |||||
*/ | |||||
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ | |||||
/* This macro is a hook if you want to do unconventional things. If it is | |||||
* defined, it's inserted at the beginning of received message processing. | |||||
* If you eat the received message and don't want default processing to | |||||
* proceed, do a return after doing your things. One possible application | |||||
* (besides debugging) is to flash a status LED on each packet. | |||||
*/ | |||||
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ | |||||
/* This macro is a hook if you need to know when an USB RESET occurs. It has | |||||
* one parameter which distinguishes between the start of RESET state and its | |||||
* end. | |||||
*/ | |||||
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ | |||||
/* This macro (if defined) is executed when a USB SET_ADDRESS request was | |||||
* received. | |||||
*/ | |||||
#define USB_COUNT_SOF 1 | |||||
/* define this macro to 1 if you need the global variable "usbSofCount" which | |||||
* counts SOF packets. This feature requires that the hardware interrupt is | |||||
* connected to D- instead of D+. | |||||
*/ | |||||
/* #ifdef __ASSEMBLER__ | |||||
* macro myAssemblerMacro | |||||
* in YL, TCNT0 | |||||
* sts timer0Snapshot, YL | |||||
* endm | |||||
* #endif | |||||
* #define USB_SOF_HOOK myAssemblerMacro | |||||
* This macro (if defined) is executed in the assembler module when a | |||||
* Start Of Frame condition is detected. It is recommended to define it to | |||||
* the name of an assembler macro which is defined here as well so that more | |||||
* than one assembler instruction can be used. The macro may use the register | |||||
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages | |||||
* immediately after an SOF pulse may be lost and must be retried by the host. | |||||
* What can you do with this hook? Since the SOF signal occurs exactly every | |||||
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in | |||||
* designs running on the internal RC oscillator. | |||||
* Please note that Start Of Frame detection works only if D- is wired to the | |||||
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! | |||||
*/ | |||||
#define USB_CFG_CHECK_DATA_TOGGLING 0 | |||||
/* define this macro to 1 if you want to filter out duplicate data packets | |||||
* sent by the host. Duplicates occur only as a consequence of communication | |||||
* errors, when the host does not receive an ACK. Please note that you need to | |||||
* implement the filtering yourself in usbFunctionWriteOut() and | |||||
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable | |||||
* for each control- and out-endpoint to check for duplicate packets. | |||||
*/ | |||||
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 | |||||
/* define this macro to 1 if you want the function usbMeasureFrameLength() | |||||
* compiled in. This function can be used to calibrate the AVR's RC oscillator. | |||||
*/ | |||||
#define USB_USE_FAST_CRC 0 | |||||
/* The assembler module has two implementations for the CRC algorithm. One is | |||||
* faster, the other is smaller. This CRC routine is only used for transmitted | |||||
* messages where timing is not critical. The faster routine needs 31 cycles | |||||
* per byte while the smaller one needs 61 to 69 cycles. The faster routine | |||||
* may be worth the 32 bytes bigger code size if you transmit lots of data and | |||||
* run the AVR close to its limit. | |||||
*/ | |||||
/* -------------------------- Device Description --------------------------- */ | |||||
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) | |||||
/* USB vendor ID for the device, low byte first. If you have registered your | |||||
* own Vendor ID, define it here. Otherwise you may use one of obdev's free | |||||
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! | |||||
* *** IMPORTANT NOTE *** | |||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices | |||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand | |||||
* the implications! | |||||
*/ | |||||
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) | |||||
/* This is the ID of the product, low byte first. It is interpreted in the | |||||
* scope of the vendor ID. If you have registered your own VID with usb.org | |||||
* or if you have licensed a PID from somebody else, define it here. Otherwise | |||||
* you may use one of obdev's free shared VID/PID pairs. See the file | |||||
* USB-IDs-for-free.txt for details! | |||||
* *** IMPORTANT NOTE *** | |||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices | |||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand | |||||
* the implications! | |||||
*/ | |||||
#define USB_CFG_DEVICE_VERSION 0x00, 0x02 | |||||
/* Version number of the device: Minor number first, then major number. | |||||
*/ | |||||
#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' | |||||
#define USB_CFG_VENDOR_NAME_LEN 13 | |||||
/* These two values define the vendor name returned by the USB device. The name | |||||
* must be given as a list of characters under single quotes. The characters | |||||
* are interpreted as Unicode (UTF-16) entities. | |||||
* If you don't want a vendor name string, undefine these macros. | |||||
* ALWAYS define a vendor name containing your Internet domain name if you use | |||||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for | |||||
* details. | |||||
*/ | |||||
#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' | |||||
#define USB_CFG_DEVICE_NAME_LEN 8 | |||||
/* Same as above for the device name. If you don't want a device name, undefine | |||||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if | |||||
* you use a shared VID/PID. | |||||
*/ | |||||
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ | |||||
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ | |||||
/* Same as above for the serial number. If you don't want a serial number, | |||||
* undefine the macros. | |||||
* It may be useful to provide the serial number through other means than at | |||||
* compile time. See the section about descriptor properties below for how | |||||
* to fine tune control over USB descriptors such as the string descriptor | |||||
* for the serial number. | |||||
*/ | |||||
#define USB_CFG_DEVICE_CLASS 0 | |||||
#define USB_CFG_DEVICE_SUBCLASS 0 | |||||
/* See USB specification if you want to conform to an existing device class. | |||||
* Class 0xff is "vendor specific". | |||||
*/ | |||||
#define USB_CFG_INTERFACE_CLASS 3 /* HID */ | |||||
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ | |||||
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ | |||||
/* See USB specification if you want to conform to an existing device class or | |||||
* protocol. The following classes must be set at interface level: | |||||
* HID class is 3, no subclass and protocol required (but may be useful!) | |||||
* CDC class is 2, use subclass 2 and protocol 1 for ACM | |||||
*/ | |||||
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 | |||||
/* Define this to the length of the HID report descriptor, if you implement | |||||
* an HID device. Otherwise don't define it or define it to 0. | |||||
* If you use this define, you must add a PROGMEM character array named | |||||
* "usbHidReportDescriptor" to your code which contains the report descriptor. | |||||
* Don't forget to keep the array and this define in sync! | |||||
*/ | |||||
/* #define USB_PUBLIC static */ | |||||
/* Use the define above if you #include usbdrv.c instead of linking against it. | |||||
* This technique saves a couple of bytes in flash memory. | |||||
*/ | |||||
/* ------------------- Fine Control over USB Descriptors ------------------- */ | |||||
/* If you don't want to use the driver's default USB descriptors, you can | |||||
* provide our own. These can be provided as (1) fixed length static data in | |||||
* flash memory, (2) fixed length static data in RAM or (3) dynamically at | |||||
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more | |||||
* information about this function. | |||||
* Descriptor handling is configured through the descriptor's properties. If | |||||
* no properties are defined or if they are 0, the default descriptor is used. | |||||
* Possible properties are: | |||||
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched | |||||
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is | |||||
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if | |||||
* you want RAM pointers. | |||||
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found | |||||
* in static memory is in RAM, not in flash memory. | |||||
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), | |||||
* the driver must know the descriptor's length. The descriptor itself is | |||||
* found at the address of a well known identifier (see below). | |||||
* List of static descriptor names (must be declared PROGMEM if in flash): | |||||
* char usbDescriptorDevice[]; | |||||
* char usbDescriptorConfiguration[]; | |||||
* char usbDescriptorHidReport[]; | |||||
* char usbDescriptorString0[]; | |||||
* int usbDescriptorStringVendor[]; | |||||
* int usbDescriptorStringDevice[]; | |||||
* int usbDescriptorStringSerialNumber[]; | |||||
* Other descriptors can't be provided statically, they must be provided | |||||
* dynamically at runtime. | |||||
* | |||||
* Descriptor properties are or-ed or added together, e.g.: | |||||
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) | |||||
* | |||||
* The following descriptors are defined: | |||||
* USB_CFG_DESCR_PROPS_DEVICE | |||||
* USB_CFG_DESCR_PROPS_CONFIGURATION | |||||
* USB_CFG_DESCR_PROPS_STRINGS | |||||
* USB_CFG_DESCR_PROPS_STRING_0 | |||||
* USB_CFG_DESCR_PROPS_STRING_VENDOR | |||||
* USB_CFG_DESCR_PROPS_STRING_PRODUCT | |||||
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER | |||||
* USB_CFG_DESCR_PROPS_HID | |||||
* USB_CFG_DESCR_PROPS_HID_REPORT | |||||
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) | |||||
* | |||||
* Note about string descriptors: String descriptors are not just strings, they | |||||
* are Unicode strings prefixed with a 2 byte header. Example: | |||||
* int serialNumberDescriptor[] = { | |||||
* USB_STRING_DESCRIPTOR_HEADER(6), | |||||
* 'S', 'e', 'r', 'i', 'a', 'l' | |||||
* }; | |||||
*/ | |||||
#define USB_CFG_DESCR_PROPS_DEVICE 0 | |||||
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC | |||||
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 | |||||
#define USB_CFG_DESCR_PROPS_STRINGS 0 | |||||
#define USB_CFG_DESCR_PROPS_STRING_0 0 | |||||
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 | |||||
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 | |||||
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 | |||||
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC | |||||
//#define USB_CFG_DESCR_PROPS_HID 0 | |||||
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC | |||||
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 | |||||
#define USB_CFG_DESCR_PROPS_UNKNOWN 0 | |||||
#define usbMsgPtr_t unsigned short | |||||
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to | |||||
* a scalar type here because gcc generates slightly shorter code for scalar | |||||
* arithmetics than for pointer arithmetics. Remove this define for backward | |||||
* type compatibility or define it to an 8 bit type if you use data in RAM only | |||||
* and all RAM is below 256 bytes (tiny memory model in IAR CC). | |||||
*/ | |||||
/* ----------------------- Optional MCU Description ------------------------ */ | |||||
/* The following configurations have working defaults in usbdrv.h. You | |||||
* usually don't need to set them explicitly. Only if you want to run | |||||
* the driver on a device which is not yet supported or with a compiler | |||||
* which is not fully supported (such as IAR C) or if you use a differnt | |||||
* interrupt than INT0, you may have to define some of these. | |||||
*/ | |||||
/* #define USB_INTR_CFG MCUCR */ | |||||
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ | |||||
/* #define USB_INTR_CFG_CLR 0 */ | |||||
/* #define USB_INTR_ENABLE GIMSK */ | |||||
/* #define USB_INTR_ENABLE_BIT INT0 */ | |||||
/* #define USB_INTR_PENDING GIFR */ | |||||
/* #define USB_INTR_PENDING_BIT INTF0 */ | |||||
/* #define USB_INTR_VECTOR INT0_vect */ | |||||
/* Set INT1 for D- falling edge to count SOF */ | |||||
/* #define USB_INTR_CFG EICRA */ | |||||
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) | |||||
/* #define USB_INTR_CFG_CLR 0 */ | |||||
/* #define USB_INTR_ENABLE EIMSK */ | |||||
#define USB_INTR_ENABLE_BIT INT1 | |||||
/* #define USB_INTR_PENDING EIFR */ | |||||
#define USB_INTR_PENDING_BIT INTF1 | |||||
#define USB_INTR_VECTOR INT1_vect | |||||
#endif /* __usbconfig_h_included__ */ |