Co-authored-by: Ryan <fauxpark@gmail.com>pull/13610/head
@ -0,0 +1,121 @@ | |||
/* | |||
Copyright 2020 Boardsource | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x4273 | |||
#define PRODUCT_ID 0x0083 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Boardsource | |||
#define PRODUCT Technik-S | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 12 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS {B0, B1, B2, B3} | |||
#define MATRIX_COL_PINS {B5, B6, B7, F5, C7, D0, D1, D2, D3, D4, D5, D6} | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
//#define BACKLIGHT_PIN B7 | |||
//#define BACKLIGHT_LEVELS 3 | |||
#define BACKLIGHT_BREATHING | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGB_DI_PIN C6 | |||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 | |||
#ifdef RGBLIGHT_ENABLE | |||
#define RGBLED_NUM 10 // Number of LEDs | |||
#endif | |||
#define DRIVER_LED_TOTAL 55 | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
//#define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,58 @@ | |||
{ | |||
"keyboard_name": "Technik-S", | |||
"url": "", | |||
"maintainer": "Boardsource", | |||
"width": 12, | |||
"height": 4, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ "label": "1", "x": 0, "y": 0 }, | |||
{ "label": "2", "x": 1, "y": 0 }, | |||
{ "label": "3", "x": 2, "y": 0 }, | |||
{ "label": "4", "x": 3, "y": 0 }, | |||
{ "label": "5", "x": 4, "y": 0 }, | |||
{ "label": "6", "x": 5, "y": 0 }, | |||
{ "label": "7", "x": 6, "y": 0 }, | |||
{ "label": "8", "x": 7, "y": 0 }, | |||
{ "label": "9", "x": 8, "y": 0 }, | |||
{ "label": "10", "x": 9, "y": 0 }, | |||
{ "label": "11", "x": 10, "y": 0 }, | |||
{ "label": "12", "x": 11, "y": 0 }, | |||
{ "label": "13", "x": 0, "y": 1, "w": 1.5 }, | |||
{ "label": "14", "x": 1.5, "y": 1 }, | |||
{ "label": "15", "x": 2.5, "y": 1 }, | |||
{ "label": "16", "x": 3.5, "y": 1 }, | |||
{ "label": "17", "x": 4.5, "y": 1 }, | |||
{ "label": "18", "x": 5.5, "y": 1 }, | |||
{ "label": "19", "x": 6.5, "y": 1 }, | |||
{ "label": "20", "x": 7.5, "y": 1 }, | |||
{ "label": "21", "x": 8.5, "y": 1 }, | |||
{ "label": "22", "x": 9.5, "y": 1 }, | |||
{ "label": "23", "x": 10.5, "y": 1, "w": 1.5 }, | |||
{ "label": "24", "x": 0, "y": 2 }, | |||
{ "label": "25", "x": 1, "y": 2 }, | |||
{ "label": "26", "x": 2, "y": 2 }, | |||
{ "label": "27", "x": 3, "y": 2 }, | |||
{ "label": "28", "x": 4, "y": 2 }, | |||
{ "label": "29", "x": 5, "y": 2 }, | |||
{ "label": "30", "x": 6, "y": 2 }, | |||
{ "label": "31", "x": 7, "y": 2 }, | |||
{ "label": "32", "x": 8, "y": 2 }, | |||
{ "label": "33", "x": 9, "y": 2 }, | |||
{ "label": "34", "x": 10, "y": 2 }, | |||
{ "label": "35", "x": 11, "y": 2 }, | |||
{ "label": "36", "x": 0, "y": 3 }, | |||
{ "label": "37", "x": 1, "y": 3 }, | |||
{ "label": "38", "x": 2, "y": 3 }, | |||
{ "label": "39", "x": 3, "y": 3, "w": 1.5 }, | |||
{ "label": "40", "x": 4.5, "y": 3, "w": 1.5 }, | |||
{ "label": "41", "x": 6, "y": 3, "w": 1.5 }, | |||
{ "label": "42", "x": 7.5, "y": 3, "w": 1.5 }, | |||
{ "label": "43", "x": 9, "y": 3 }, | |||
{ "label": "44", "x": 10, "y": 3 }, | |||
{ "label": "45", "x": 11, "y": 3 } | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,53 @@ | |||
/* Copyright 2020 Boardsource | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layers { | |||
_MAIN, | |||
_RAISE, | |||
_LOWER, | |||
}; | |||
// Readability keycodes | |||
#define LOWER MO(_LOWER) | |||
#define RAISE MO(_RAISE) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_MAIN] = LAYOUT( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, | |||
KC_LSHIFT,KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_UP, KC_ENT , | |||
RGB_TOG, KC_LCTL, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_RIGHT | |||
), | |||
[_RAISE] = LAYOUT( | |||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, | |||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, | |||
RGB_MOD, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, | |||
RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD | |||
), | |||
[_LOWER] = LAYOUT( | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, | |||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD | |||
) | |||
}; | |||
@ -0,0 +1 @@ | |||
# The default keymap for Technik-S |
@ -0,0 +1,53 @@ | |||
/* Copyright 2020 Boardsource | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layers { | |||
_MAIN, | |||
_RAISE, | |||
_LOWER, | |||
}; | |||
// Readability keycodes | |||
#define LOWER MO(_LOWER) | |||
#define RAISE MO(_RAISE) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_MAIN] = LAYOUT( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, | |||
KC_LSHIFT,KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_UP, KC_ENT , | |||
RGB_TOG, KC_LCTL, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_RIGHT | |||
), | |||
[_RAISE] = LAYOUT( | |||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, | |||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, | |||
RGB_MOD, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, | |||
RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD | |||
), | |||
[_LOWER] = LAYOUT( | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, | |||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, | |||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD | |||
) | |||
}; | |||
@ -0,0 +1 @@ | |||
# The via keymap for Technik-S |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,22 @@ | |||
# Technik-S | |||
![Technik-S](https://i.imgur.com/0QLgu5V.jpeg) | |||
The technik-s is a 40% staggard keyboard that is designed to fit in the same case as the technik-o a 4x12 ortho | |||
* Keyboard Maintainer: [Boardsource](https://github.com/boardsource) | |||
* Hardware Supported: V1 pcb | |||
* Hardware Availability: [boardsource](https://boardsource.xyz/store/5ffb9b01edd0447f8023fdb2) | |||
Make example for this keyboard (after setting up your build environment): | |||
make boardsource/technik_s:default | |||
Flashing example for this keyboard: | |||
make boardsource/technik_s:default:flash | |||
Reset keyboard by pushing reset button on back of pcb through access hole. Or hold down top left key while you plug in the usb cable. | |||
Then run this command in your local qmk repo, or flash using qmk toolbox. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,25 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = no # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
RGB_MATRIX_ENABLE = yes | |||
RGB_MATRIX_DRIVER = WS2812 | |||
LTO_ENABLE = yes |
@ -0,0 +1,38 @@ | |||
/* Copyright 2020 Boardsource | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "technik_s.h" | |||
#ifdef RGB_MATRIX_ENABLE | |||
led_config_t g_led_config = { { | |||
{11,12,13,14,15,16,17,18,19,20,21,22}, | |||
{23,24,25,26,27,28,29,30,31,32,33}, | |||
{34,35,36,37,38,39,40,41,42,43,44,45}, | |||
{46,47,48,49,50,51,52,53,54,55} | |||
}, { | |||
{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}, | |||
{10.5, 1}, {9.5, 1}, {8.5, 1}, {7.5, 1}, {6.5, 1}, {5.5, 1}, {4.5, 1}, {3.5, 1}, {2.5, 1}, {1.5, 1}, {0.5, 1}, | |||
{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}, | |||
{11, 3}, {10, 3}, {9, 3}, {8, 3}, {6.5, 3}, {5, 3}, {3.5, 3}, {2, 3}, {1, 3}, {0, 3}, | |||
}, { | |||
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, | |||
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, | |||
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, | |||
1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, | |||
1, 1, 1, 1, 4, 4, 1, 1, 1, 1 | |||
} }; | |||
#endif | |||
@ -0,0 +1,31 @@ | |||
/* Copyright 2020 Boardsource | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, \ | |||
K12, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \ | |||
K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, \ | |||
K36, K37, K38, K39, K40, K41, K42, K43, K44, K45 \ | |||
) { \ | |||
{K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11}, \ | |||
{K12, KC_NO, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23}, \ | |||
{K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35}, \ | |||
{K36, K37, K38, K39,KC_NO,K40, K41,KC_NO,K42, K43, K44, K45} \ | |||
} | |||