* Add stm32f072 base ck4x4 to handwired * add prints * Save these tries * Save changes again * Working hadron oled * OLEd working but ws2812b still iffy: * save another try * Encoder feature + OLED * RTC code * Implement clock setting mode * Whitespace * Encoder hooked up to working LED PWM code * Add missing files * eeprom changes * Save changes * Move i2c master * Move satisfaction75 under cannonkeys * Set proper default folder * Revert some core changes * Undo paved iris changes * Reorganize code for maintainability and prep for new features * Add starting code for clock OLED mode * Clock set mode finished * Add custom encoder modes * Actually add VIA keymap * Gate to only 072 * fix gate for only 072 * Update header guards and includes * Update i2c selection strategy * Update board.c to handle software reset to DFUpull/5129/head 0.6.275
@ -0,0 +1,111 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/* | |||
* This file has been automatically generated using ChibiStudio board | |||
* generator plugin. Do not edit manually. | |||
*/ | |||
#include "hal.h" | |||
#if HAL_USE_PAL || defined(__DOXYGEN__) | |||
/** | |||
* @brief PAL setup. | |||
* @details Digital I/O ports static configuration as defined in @p board.h. | |||
* This variable is used by the HAL when initializing the PAL driver. | |||
*/ | |||
const PALConfig pal_default_config = { | |||
#if STM32_HAS_GPIOA | |||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, | |||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOB | |||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, | |||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOC | |||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, | |||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOD | |||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, | |||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOE | |||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, | |||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOF | |||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, | |||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOG | |||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, | |||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOH | |||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, | |||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, | |||
#endif | |||
#if STM32_HAS_GPIOI | |||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, | |||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} | |||
#endif | |||
}; | |||
#endif | |||
void enter_bootloader_mode_if_requested(void); | |||
/** | |||
* @brief Early initialization code. | |||
* @details This initialization must be performed just after stack setup | |||
* and before any other initialization. | |||
*/ | |||
void __early_init(void) { | |||
enter_bootloader_mode_if_requested(); | |||
stm32_clock_init(); | |||
} | |||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) | |||
/** | |||
* @brief MMC_SPI card detection. | |||
*/ | |||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { | |||
(void)mmcp; | |||
/* TODO: Fill the implementation.*/ | |||
return true; | |||
} | |||
/** | |||
* @brief MMC_SPI card write protection detection. | |||
*/ | |||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) { | |||
(void)mmcp; | |||
/* TODO: Fill the implementation.*/ | |||
return false; | |||
} | |||
#endif | |||
/** | |||
* @brief Board-specific initialization code. | |||
* @todo Add your board-specific code, if any. | |||
*/ | |||
void boardInit(void) { | |||
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; | |||
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); | |||
} |
@ -0,0 +1,922 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/* | |||
* This file has been automatically generated using ChibiStudio board | |||
* generator plugin. Do not edit manually. | |||
*/ | |||
#ifndef BOARD_H | |||
#define BOARD_H | |||
/* | |||
* Setup for ST STM32F072B-Discovery board. | |||
*/ | |||
/* | |||
* Board identifier. | |||
*/ | |||
#define BOARD_ST_STM32F072B_DISCOVERY | |||
#define BOARD_NAME "ST STM32F072B-Discovery" | |||
/* | |||
* Board oscillators-related settings. | |||
* NOTE: HSE not fitted. | |||
*/ | |||
#if !defined(STM32_LSECLK) | |||
#define STM32_LSECLK 32768 | |||
#endif | |||
#define STM32_LSEDRV (3U << 3U) | |||
#if !defined(STM32_HSECLK) | |||
#define STM32_HSECLK 0U | |||
#endif | |||
#define STM32_HSE_BYPASS | |||
/* | |||
* MCU type as defined in the ST header. | |||
*/ | |||
#define STM32F072xB | |||
/* | |||
* IO pins assignments. | |||
*/ | |||
#define GPIOA_BUTTON 0U | |||
#define GPIOA_PIN1 1U | |||
#define GPIOA_PIN2 2U | |||
#define GPIOA_PIN3 3U | |||
#define GPIOA_PIN4 4U | |||
#define GPIOA_PIN5 5U | |||
#define GPIOA_PIN6 6U | |||
#define GPIOA_PIN7 7U | |||
#define GPIOA_PIN8 8U | |||
#define GPIOA_PIN9 9U | |||
#define GPIOA_PIN10 10U | |||
#define GPIOA_USB_DM 11U | |||
#define GPIOA_USB_DP 12U | |||
#define GPIOA_SWDIO 13U | |||
#define GPIOA_SWCLK 14U | |||
#define GPIOA_PIN15 15U | |||
#define GPIOB_PIN0 0U | |||
#define GPIOB_PIN1 1U | |||
#define GPIOB_PIN2 2U | |||
#define GPIOB_PIN3 3U | |||
#define GPIOB_PIN4 4U | |||
#define GPIOB_PIN5 5U | |||
#define GPIOB_PIN6 6U | |||
#define GPIOB_PIN7 7U | |||
#define GPIOB_PIN8 8U | |||
#define GPIOB_PIN9 9U | |||
#define GPIOB_PIN10 10U | |||
#define GPIOB_PIN11 11U | |||
#define GPIOB_PIN12 12U | |||
#define GPIOB_SPI2_SCK 13U | |||
#define GPIOB_SPI2_MISO 14U | |||
#define GPIOB_SPI2_MOSI 15U | |||
#define GPIOC_MEMS_CS 0U | |||
#define GPIOC_PIN1 1U | |||
#define GPIOC_PIN2 2U | |||
#define GPIOC_PIN3 3U | |||
#define GPIOC_PIN4 4U | |||
#define GPIOC_PIN5 5U | |||
#define GPIOC_LED_RED 6U | |||
#define GPIOC_LED_BLUE 7U | |||
#define GPIOC_LED_ORANGE 8U | |||
#define GPIOC_LED_GREEN 9U | |||
#define GPIOC_PIN10 10U | |||
#define GPIOC_PIN11 11U | |||
#define GPIOC_PIN12 12U | |||
#define GPIOC_PIN13 13U | |||
#define GPIOC_OSC32_IN 14U | |||
#define GPIOC_OSC32_OUT 15U | |||
#define GPIOD_PIN0 0U | |||
#define GPIOD_PIN1 1U | |||
#define GPIOD_PIN2 2U | |||
#define GPIOD_PIN3 3U | |||
#define GPIOD_PIN4 4U | |||
#define GPIOD_PIN5 5U | |||
#define GPIOD_PIN6 6U | |||
#define GPIOD_PIN7 7U | |||
#define GPIOD_PIN8 8U | |||
#define GPIOD_PIN9 9U | |||
#define GPIOD_PIN10 10U | |||
#define GPIOD_PIN11 11U | |||
#define GPIOD_PIN12 12U | |||
#define GPIOD_PIN13 13U | |||
#define GPIOD_PIN14 14U | |||
#define GPIOD_PIN15 15U | |||
#define GPIOE_PIN0 0U | |||
#define GPIOE_PIN1 1U | |||
#define GPIOE_PIN2 2U | |||
#define GPIOE_PIN3 3U | |||
#define GPIOE_PIN4 4U | |||
#define GPIOE_PIN5 5U | |||
#define GPIOE_PIN6 6U | |||
#define GPIOE_PIN7 7U | |||
#define GPIOE_PIN8 8U | |||
#define GPIOE_PIN9 9U | |||
#define GPIOE_PIN10 10U | |||
#define GPIOE_PIN11 11U | |||
#define GPIOE_PIN12 12U | |||
#define GPIOE_PIN13 13U | |||
#define GPIOE_PIN14 14U | |||
#define GPIOE_PIN15 15U | |||
#define GPIOF_OSC_IN 0U | |||
#define GPIOF_OSC_OUT 1U | |||
#define GPIOF_PIN2 2U | |||
#define GPIOF_PIN3 3U | |||
#define GPIOF_PIN4 4U | |||
#define GPIOF_PIN5 5U | |||
#define GPIOF_PIN6 6U | |||
#define GPIOF_PIN7 7U | |||
#define GPIOF_PIN8 8U | |||
#define GPIOF_PIN9 9U | |||
#define GPIOF_PIN10 10U | |||
#define GPIOF_PIN11 11U | |||
#define GPIOF_PIN12 12U | |||
#define GPIOF_PIN13 13U | |||
#define GPIOF_PIN14 14U | |||
#define GPIOF_PIN15 15U | |||
/* | |||
* IO lines assignments. | |||
*/ | |||
#define LINE_BUTTON PAL_LINE(GPIOA, 0U) | |||
#define LINE_USB_DM PAL_LINE(GPIOA, 11U) | |||
#define LINE_USB_DP PAL_LINE(GPIOA, 12U) | |||
#define LINE_SWDIO PAL_LINE(GPIOA, 13U) | |||
#define LINE_SWCLK PAL_LINE(GPIOA, 14U) | |||
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) | |||
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) | |||
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) | |||
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) | |||
#define LINE_LED_RED PAL_LINE(GPIOC, 6U) | |||
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) | |||
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) | |||
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) | |||
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) | |||
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) | |||
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) | |||
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) | |||
/* | |||
* I/O ports initial setup, this configuration is established soon after reset | |||
* in the initialization code. | |||
* Please refer to the STM32 Reference Manual for details. | |||
*/ | |||
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) | |||
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) | |||
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) | |||
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) | |||
#define PIN_ODR_LOW(n) (0U << (n)) | |||
#define PIN_ODR_HIGH(n) (1U << (n)) | |||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) | |||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) | |||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) | |||
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) | |||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) | |||
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) | |||
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) | |||
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) | |||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) | |||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) | |||
/* | |||
* GPIOA setup: | |||
* | |||
* PA0 - BUTTON (input floating). | |||
* PA1 - PIN1 (input pullup). | |||
* PA2 - PIN2 (input pullup). | |||
* PA3 - PIN3 (input pullup). | |||
* PA4 - PIN4 (input pullup). | |||
* PA5 - PIN5 (input pullup). | |||
* PA6 - PIN6 (input pullup). | |||
* PA7 - PIN7 (input pullup). | |||
* PA8 - PIN8 (input pullup). | |||
* PA9 - PIN9 (input pullup). | |||
* PA10 - PIN10 (input pullup). | |||
* PA11 - USB_DM (input floating). | |||
* PA12 - USB_DP (input floating). | |||
* PA13 - SWDIO (alternate 0). | |||
* PA14 - SWCLK (alternate 0). | |||
* PA15 - PIN15 (input pullup). | |||
*/ | |||
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN1) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN2) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN3) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN4) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN5) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN6) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN7) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN8) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN9) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN10) | \ | |||
PIN_MODE_INPUT(GPIOA_USB_DM) | \ | |||
PIN_MODE_INPUT(GPIOA_USB_DP) | \ | |||
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ | |||
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ | |||
PIN_MODE_INPUT(GPIOA_PIN15)) | |||
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) | |||
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ | |||
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ | |||
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ | |||
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ | |||
PIN_OSPEED_HIGH(GPIOA_PIN15)) | |||
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ | |||
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ | |||
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ | |||
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ | |||
PIN_PUPDR_PULLUP(GPIOA_PIN15)) | |||
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN1) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN2) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN3) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN4) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN5) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN6) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN7) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN8) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN9) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN10) | \ | |||
PIN_ODR_HIGH(GPIOA_USB_DM) | \ | |||
PIN_ODR_HIGH(GPIOA_USB_DP) | \ | |||
PIN_ODR_HIGH(GPIOA_SWDIO) | \ | |||
PIN_ODR_HIGH(GPIOA_SWCLK) | \ | |||
PIN_ODR_HIGH(GPIOA_PIN15)) | |||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN7, 0U)) | |||
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ | |||
PIN_AFIO_AF(GPIOA_PIN15, 0U)) | |||
/* | |||
* GPIOB setup: | |||
* | |||
* PB0 - PIN0 (input pullup). | |||
* PB1 - PIN1 (input pullup). | |||
* PB2 - PIN2 (input pullup). | |||
* PB3 - PIN3 (input pullup). | |||
* PB4 - PIN4 (input pullup). | |||
* PB5 - PIN5 (input pullup). | |||
* PB6 - PIN6 (input pullup). | |||
* PB7 - PIN7 (input pullup). | |||
* PB8 - PIN8 (input pullup). | |||
* PB9 - PIN9 (input pullup). | |||
* PB10 - PIN10 (input pullup). | |||
* PB11 - PIN11 (input pullup). | |||
* PB12 - PIN12 (input pullup). | |||
* PB13 - SPI2_SCK (alternate 0). | |||
* PB14 - SPI2_MISO (alternate 0). | |||
* PB15 - SPI2_MOSI (alternate 0). | |||
*/ | |||
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN1) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN2) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN3) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN4) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN5) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN6) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN7) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN8) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN9) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN10) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN11) | \ | |||
PIN_MODE_INPUT(GPIOB_PIN12) | \ | |||
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ | |||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ | |||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) | |||
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) | |||
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ | |||
PIN_OSPEED_HIGH(GPIOB_PIN2) | \ | |||
PIN_OSPEED_HIGH(GPIOB_PIN3) | \ | |||
PIN_OSPEED_HIGH(GPIOB_PIN4) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ | |||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) | |||
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ | |||
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ | |||
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ | |||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ | |||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) | |||
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN1) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN2) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN3) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN4) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN5) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN6) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN7) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN8) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN9) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN10) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN11) | \ | |||
PIN_ODR_HIGH(GPIOB_PIN12) | \ | |||
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ | |||
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ | |||
PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) | |||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN7, 0U)) | |||
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ | |||
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) | |||
/* | |||
* GPIOC setup: | |||
* | |||
* PC0 - MEMS_CS (output pushpull maximum). | |||
* PC1 - PIN1 (input pullup). | |||
* PC2 - PIN2 (input pullup). | |||
* PC3 - PIN3 (input pullup). | |||
* PC4 - PIN4 (input pullup). | |||
* PC5 - PIN5 (input pullup). | |||
* PC6 - LED_RED (output pushpull maximum). | |||
* PC7 - LED_BLUE (output pushpull maximum). | |||
* PC8 - LED_ORANGE (output pushpull maximum). | |||
* PC9 - LED_GREEN (output pushpull maximum). | |||
* PC10 - PIN10 (input pullup). | |||
* PC11 - PIN11 (input pullup). | |||
* PC12 - PIN12 (input pullup). | |||
* PC13 - PIN13 (input pullup). | |||
* PC14 - OSC32_IN (input floating). | |||
* PC15 - OSC32_OUT (input floating). | |||
*/ | |||
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN1) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN2) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN3) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN4) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN5) | \ | |||
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ | |||
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ | |||
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ | |||
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN10) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN11) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN12) | \ | |||
PIN_MODE_INPUT(GPIOC_PIN13) | \ | |||
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ | |||
PIN_MODE_INPUT(GPIOC_OSC32_OUT)) | |||
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) | |||
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ | |||
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ | |||
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ | |||
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ | |||
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ | |||
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ | |||
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ | |||
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) | |||
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ | |||
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ | |||
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ | |||
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ | |||
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ | |||
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ | |||
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ | |||
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) | |||
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN1) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN2) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN3) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN4) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN5) | \ | |||
PIN_ODR_LOW(GPIOC_LED_RED) | \ | |||
PIN_ODR_LOW(GPIOC_LED_BLUE) | \ | |||
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ | |||
PIN_ODR_LOW(GPIOC_LED_GREEN) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN10) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN11) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN12) | \ | |||
PIN_ODR_HIGH(GPIOC_PIN13) | \ | |||
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ | |||
PIN_ODR_HIGH(GPIOC_OSC32_OUT)) | |||
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) | |||
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ | |||
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) | |||
/* | |||
* GPIOD setup: | |||
* | |||
* PD0 - PIN0 (input pullup). | |||
* PD1 - PIN1 (input pullup). | |||
* PD2 - PIN2 (input pullup). | |||
* PD3 - PIN3 (input pullup). | |||
* PD4 - PIN4 (input pullup). | |||
* PD5 - PIN5 (input pullup). | |||
* PD6 - PIN6 (input pullup). | |||
* PD7 - PIN7 (input pullup). | |||
* PD8 - PIN8 (input pullup). | |||
* PD9 - PIN9 (input pullup). | |||
* PD10 - PIN10 (input pullup). | |||
* PD11 - PIN11 (input pullup). | |||
* PD12 - PIN12 (input pullup). | |||
* PD13 - PIN13 (input pullup). | |||
* PD14 - PIN14 (input pullup). | |||
* PD15 - PIN15 (input pullup). | |||
*/ | |||
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN1) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN2) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN3) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN4) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN5) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN6) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN7) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN8) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN9) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN10) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN11) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN12) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN13) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN14) | \ | |||
PIN_MODE_INPUT(GPIOD_PIN15)) | |||
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) | |||
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ | |||
PIN_OSPEED_VERYLOW(GPIOD_PIN15)) | |||
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ | |||
PIN_PUPDR_PULLUP(GPIOD_PIN15)) | |||
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN1) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN2) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN3) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN4) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN5) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN6) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN7) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN8) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN9) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN10) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN11) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN12) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN13) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN14) | \ | |||
PIN_ODR_HIGH(GPIOD_PIN15)) | |||
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN7, 0U)) | |||
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ | |||
PIN_AFIO_AF(GPIOD_PIN15, 0U)) | |||
/* | |||
* GPIOE setup: | |||
* | |||
* PE0 - PIN0 (input pullup). | |||
* PE1 - PIN1 (input pullup). | |||
* PE2 - PIN2 (input pullup). | |||
* PE3 - PIN3 (input pullup). | |||
* PE4 - PIN4 (input pullup). | |||
* PE5 - PIN5 (input pullup). | |||
* PE6 - PIN6 (input pullup). | |||
* PE7 - PIN7 (input pullup). | |||
* PE8 - PIN8 (input pullup). | |||
* PE9 - PIN9 (input pullup). | |||
* PE10 - PIN10 (input pullup). | |||
* PE11 - PIN11 (input pullup). | |||
* PE12 - PIN12 (input pullup). | |||
* PE13 - PIN13 (input pullup). | |||
* PE14 - PIN14 (input pullup). | |||
* PE15 - PIN15 (input pullup). | |||
*/ | |||
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN1) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN2) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN3) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN4) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN5) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN6) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN7) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN8) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN9) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN10) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN11) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN12) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN13) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN14) | \ | |||
PIN_MODE_INPUT(GPIOE_PIN15)) | |||
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) | |||
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ | |||
PIN_OSPEED_VERYLOW(GPIOE_PIN15)) | |||
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ | |||
PIN_PUPDR_PULLUP(GPIOE_PIN15)) | |||
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN1) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN2) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN3) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN4) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN5) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN6) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN7) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN8) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN9) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN10) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN11) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN12) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN13) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN14) | \ | |||
PIN_ODR_HIGH(GPIOE_PIN15)) | |||
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN7, 0U)) | |||
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ | |||
PIN_AFIO_AF(GPIOE_PIN15, 0U)) | |||
/* | |||
* GPIOF setup: | |||
* | |||
* PF0 - OSC_IN (input floating). | |||
* PF1 - OSC_OUT (input floating). | |||
* PF2 - PIN2 (input pullup). | |||
* PF3 - PIN3 (input pullup). | |||
* PF4 - PIN4 (input pullup). | |||
* PF5 - PIN5 (input pullup). | |||
* PF6 - PIN6 (input pullup). | |||
* PF7 - PIN7 (input pullup). | |||
* PF8 - PIN8 (input pullup). | |||
* PF9 - PIN9 (input pullup). | |||
* PF10 - PIN10 (input pullup). | |||
* PF11 - PIN11 (input pullup). | |||
* PF12 - PIN12 (input pullup). | |||
* PF13 - PIN13 (input pullup). | |||
* PF14 - PIN14 (input pullup). | |||
* PF15 - PIN15 (input pullup). | |||
*/ | |||
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ | |||
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN2) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN3) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN4) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN5) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN6) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN7) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN8) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN9) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN10) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN11) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN12) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN13) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN14) | \ | |||
PIN_MODE_INPUT(GPIOF_PIN15)) | |||
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ | |||
PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) | |||
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ | |||
PIN_OSPEED_VERYLOW(GPIOF_PIN15)) | |||
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ | |||
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ | |||
PIN_PUPDR_PULLUP(GPIOF_PIN15)) | |||
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ | |||
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN2) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN3) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN4) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN5) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN6) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN7) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN8) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN9) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN10) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN11) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN12) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN13) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN14) | \ | |||
PIN_ODR_HIGH(GPIOF_PIN15)) | |||
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN7, 0U)) | |||
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ | |||
PIN_AFIO_AF(GPIOF_PIN15, 0U)) | |||
#if !defined(_FROM_ASM_) | |||
#ifdef __cplusplus | |||
extern "C" { | |||
#endif | |||
void boardInit(void); | |||
#ifdef __cplusplus | |||
} | |||
#endif | |||
#endif /* _FROM_ASM_ */ | |||
#endif /* BOARD_H */ |
@ -0,0 +1,5 @@ | |||
# List of all the board related files. | |||
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c | |||
# Required include directories | |||
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY |
@ -0,0 +1,703 @@ | |||
<?xml version="1.0" encoding="UTF-8"?> | |||
<!-- STM32F0xx board Template --> | |||
<board | |||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" | |||
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> | |||
<configuration_settings> | |||
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> | |||
<output_path>..</output_path> | |||
<hal_version>3.0.x</hal_version> | |||
</configuration_settings> | |||
<board_name>ST STM32F072B-Discovery</board_name> | |||
<board_id>ST_STM32F072B_DISCOVERY</board_id> | |||
<board_functions></board_functions> | |||
<subtype>STM32F072xB</subtype> | |||
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" | |||
LSEBypass="false" LSEDrive="3 High Drive (default)" /> | |||
<ports> | |||
<GPIOA> | |||
<pin0 | |||
ID="BUTTON" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin1 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin2 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin3 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin4 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin5 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin6 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin7 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin8 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin9 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin10 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin11 | |||
ID="USB_DM" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin12 | |||
ID="USB_DP" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin13 | |||
ID="SWDIO" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Alternate" | |||
Alternate="0" /> | |||
<pin14 | |||
ID="SWCLK" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="PullDown" | |||
Level="High" | |||
Mode="Alternate" | |||
Alternate="0" /> | |||
<pin15 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
</GPIOA> | |||
<GPIOB> | |||
<pin0 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin1 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin2 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin3 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin4 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin5 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin6 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin7 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin8 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin9 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin10 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin11 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin12 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin13 | |||
ID="SPI2_SCK" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Alternate" | |||
Alternate="0" /> | |||
<pin14 | |||
ID="SPI2_MISO" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Alternate" | |||
Alternate="0" /> | |||
<pin15 | |||
ID="SPI2_MOSI" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Alternate" | |||
Alternate="0" /> | |||
</GPIOB> | |||
<GPIOC> | |||
<pin0 | |||
ID="MEMS_CS" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Output" | |||
Alternate="0" /> | |||
<pin1 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin2 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin3 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin4 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin5 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin6 | |||
ID="LED_RED" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="Floating" | |||
Level="Low" | |||
Mode="Output" | |||
Alternate="0" /> | |||
<pin7 | |||
ID="LED_BLUE" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="Floating" | |||
Level="Low" | |||
Mode="Output" | |||
Alternate="0" /> | |||
<pin8 | |||
ID="LED_ORANGE" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="Floating" | |||
Level="Low" | |||
Mode="Output" | |||
Alternate="0" ></pin8> | |||
<pin9 | |||
ID="LED_GREEN" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="Floating" | |||
Level="Low" | |||
Mode="Output" | |||
Alternate="0" /> | |||
<pin10 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin11 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin12 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin13 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin14 | |||
ID="OSC32_IN" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin15 | |||
ID="OSC32_OUT" | |||
Type="PushPull" | |||
Speed="Maximum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
</GPIOC> | |||
<GPIOD> | |||
<pin0 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin1 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin2 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin3 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin4 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin5 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin6 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin7 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin8 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin9 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin10 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin11 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin12 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin13 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin14 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin15 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
</GPIOD> | |||
<GPIOE> | |||
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" | |||
Level="High" Mode="Input" Alternate="0" /> | |||
</GPIOE> | |||
<GPIOF> | |||
<pin0 | |||
ID="OSC_IN" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin1 | |||
ID="OSC_OUT" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="Floating" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin2 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin3 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin4 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin5 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin6 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin7 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin8 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin9 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin10 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin11 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin12 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin13 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin14 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
<pin15 | |||
ID="" | |||
Type="PushPull" | |||
Speed="Minimum" | |||
Resistor="PullUp" | |||
Level="High" | |||
Mode="Input" | |||
Alternate="0" /> | |||
</GPIOF> | |||
</ports> | |||
</board> |
@ -0,0 +1,7 @@ | |||
/* Address for jumping to bootloader on STM32 chips. */ | |||
/* It is chip dependent, the correct number can be looked up here (page 175): | |||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf | |||
* This also requires a patch to chibios: | |||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch | |||
*/ | |||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 |
@ -0,0 +1,524 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/chconf.h | |||
* @brief Configuration file template. | |||
* @details A copy of this file must be placed in each project directory, it | |||
* contains the application specific kernel settings. | |||
* | |||
* @addtogroup config | |||
* @details Kernel related settings and hooks. | |||
* @{ | |||
*/ | |||
#ifndef CHCONF_H | |||
#define CHCONF_H | |||
#define _CHIBIOS_RT_CONF_ | |||
/*===========================================================================*/ | |||
/** | |||
* @name System timers settings | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System time counter resolution. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
#define CH_CFG_ST_RESOLUTION 32 | |||
/** | |||
* @brief System tick frequency. | |||
* @details Frequency of the system timer that drives the system ticks. This | |||
* setting also defines the system tick time unit. | |||
*/ | |||
#define CH_CFG_ST_FREQUENCY 10000 | |||
/** | |||
* @brief Time delta constant for the tick-less mode. | |||
* @note If this value is zero then the system uses the classic | |||
* periodic tick. This value represents the minimum number | |||
* of ticks that is safe to specify in a timeout directive. | |||
* The value one is not valid, timeouts are rounded up to | |||
* this value. | |||
*/ | |||
#define CH_CFG_ST_TIMEDELTA 2 | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel parameters and options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Round robin interval. | |||
* @details This constant is the number of system ticks allowed for the | |||
* threads before preemption occurs. Setting this value to zero | |||
* disables the preemption for threads with equal priority and the | |||
* round robin becomes cooperative. Note that higher priority | |||
* threads can still preempt, the kernel is always preemptive. | |||
* @note Disabling the round robin preemption makes the kernel more compact | |||
* and generally faster. | |||
* @note The round robin preemption is not supported in tickless mode and | |||
* must be set to zero in that case. | |||
*/ | |||
#define CH_CFG_TIME_QUANTUM 0 | |||
/** | |||
* @brief Managed RAM size. | |||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||
* then the whole available RAM is used. The core memory is made | |||
* available to the heap allocator and/or can be used directly through | |||
* the simplified core memory allocator. | |||
* | |||
* @note In order to let the OS manage the whole RAM the linker script must | |||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||
*/ | |||
#define CH_CFG_MEMCORE_SIZE 0 | |||
/** | |||
* @brief Idle thread automatic spawn suppression. | |||
* @details When this option is activated the function @p chSysInit() | |||
* does not spawn the idle thread. The application @p main() | |||
* function becomes the idle thread and must implement an | |||
* infinite loop. | |||
*/ | |||
#define CH_CFG_NO_IDLE_THREAD FALSE | |||
/* Use __WFI in the idle thread for waiting. Does lower the power | |||
* consumption. */ | |||
#define CORTEX_ENABLE_WFI_IDLE TRUE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Performance options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief OS optimization. | |||
* @details If enabled then time efficient rather than space efficient code | |||
* is used when two possible implementations exist. | |||
* | |||
* @note This is not related to the compiler optimization options. | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_OPTIMIZE_SPEED FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Subsystem options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Time Measurement APIs. | |||
* @details If enabled then the time measurement APIs are included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_TM FALSE | |||
/** | |||
* @brief Threads registry APIs. | |||
* @details If enabled then the registry APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_REGISTRY TRUE | |||
/** | |||
* @brief Threads synchronization APIs. | |||
* @details If enabled then the @p chThdWait() function is included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_WAITEXIT TRUE | |||
/** | |||
* @brief Semaphores APIs. | |||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_SEMAPHORES TRUE | |||
/** | |||
* @brief Semaphores queuing mode. | |||
* @details If enabled then the threads are enqueued on semaphores by | |||
* priority rather than in FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||
/** | |||
* @brief Mutexes APIs. | |||
* @details If enabled then the mutexes APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MUTEXES TRUE | |||
/** | |||
* @brief Enables recursive behavior on mutexes. | |||
* @note Recursive mutexes are heavier and have an increased | |||
* memory footprint. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||
/** | |||
* @brief Conditional Variables APIs. | |||
* @details If enabled then the conditional variables APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#define CH_CFG_USE_CONDVARS TRUE | |||
/** | |||
* @brief Conditional Variables APIs with timeout. | |||
* @details If enabled then the conditional variables APIs with timeout | |||
* specification are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||
*/ | |||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE | |||
/** | |||
* @brief Events Flags APIs. | |||
* @details If enabled then the event flags APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_EVENTS TRUE | |||
/** | |||
* @brief Events Flags APIs with timeout. | |||
* @details If enabled then the events APIs with timeout specification | |||
* are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_EVENTS. | |||
*/ | |||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||
/** | |||
* @brief Synchronous Messages APIs. | |||
* @details If enabled then the synchronous messages APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MESSAGES TRUE | |||
/** | |||
* @brief Synchronous Messages queuing mode. | |||
* @details If enabled then messages are served by priority rather than in | |||
* FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||
*/ | |||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||
/** | |||
* @brief Mailboxes APIs. | |||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||
* included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#define CH_CFG_USE_MAILBOXES TRUE | |||
/** | |||
* @brief Core Memory Manager APIs. | |||
* @details If enabled then the core memory manager APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MEMCORE FALSE | |||
/** | |||
* @brief Heap Allocator APIs. | |||
* @details If enabled then the memory heap allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||
* @p CH_CFG_USE_SEMAPHORES. | |||
* @note Mutexes are recommended. | |||
*/ | |||
#define CH_CFG_USE_HEAP FALSE | |||
/** | |||
* @brief Memory Pools Allocator APIs. | |||
* @details If enabled then the memory pools allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MEMPOOLS FALSE | |||
/** | |||
* @brief Dynamic Threads APIs. | |||
* @details If enabled then the dynamic threads creation APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||
*/ | |||
#define CH_CFG_USE_DYNAMIC FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Debug options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Debug option, kernel statistics. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_STATISTICS FALSE | |||
/** | |||
* @brief Debug option, system state check. | |||
* @details If enabled the correct call protocol for system APIs is checked | |||
* at runtime. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE | |||
/** | |||
* @brief Debug option, parameters checks. | |||
* @details If enabled then the checks on the API functions input | |||
* parameters are activated. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_ENABLE_CHECKS FALSE | |||
/** | |||
* @brief Debug option, consistency checks. | |||
* @details If enabled then all the assertions in the kernel code are | |||
* activated. This includes consistency checks inside the kernel, | |||
* runtime anomalies and port-defined checks. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_ENABLE_ASSERTS FALSE | |||
/** | |||
* @brief Debug option, trace buffer. | |||
* @details If enabled then the trace buffer is activated. | |||
* | |||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||
/** | |||
* @brief Trace buffer entries. | |||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#define CH_DBG_TRACE_BUFFER_SIZE 128 | |||
/** | |||
* @brief Debug option, stack checks. | |||
* @details If enabled then a runtime stack check is performed. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note The stack check is performed in a architecture/port dependent way. | |||
* It may not be implemented or some ports. | |||
* @note The default failure mode is to halt the system with the global | |||
* @p panic_msg variable set to @p NULL. | |||
*/ | |||
#define CH_DBG_ENABLE_STACK_CHECK FALSE | |||
/** | |||
* @brief Debug option, stacks initialization. | |||
* @details If enabled then the threads working area is filled with a byte | |||
* value when a thread is created. This can be useful for the | |||
* runtime measurement of the used stack. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_FILL_THREADS FALSE | |||
/** | |||
* @brief Debug option, threads profiling. | |||
* @details If enabled then a field is added to the @p thread_t structure that | |||
* counts the system ticks occurred while executing the thread. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note This debug option is not currently compatible with the | |||
* tickless mode. | |||
*/ | |||
#define CH_DBG_THREADS_PROFILING FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel hooks | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Threads descriptor structure extension. | |||
* @details User fields added to the end of the @p thread_t structure. | |||
*/ | |||
#define CH_CFG_THREAD_EXTRA_FIELDS \ | |||
/* Add threads custom fields here.*/ | |||
/** | |||
* @brief Threads initialization hook. | |||
* @details User initialization code added to the @p chThdInit() API. | |||
* | |||
* @note It is invoked from within @p chThdInit() and implicitly from all | |||
* the threads creation APIs. | |||
*/ | |||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||
/* Add threads initialization code here.*/ \ | |||
} | |||
/** | |||
* @brief Threads finalization hook. | |||
* @details User finalization code added to the @p chThdExit() API. | |||
*/ | |||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||
/* Add threads finalization code here.*/ \ | |||
} | |||
/** | |||
* @brief Context switch hook. | |||
* @details This hook is invoked just before switching between threads. | |||
*/ | |||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||
/* Context switch code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR enter hook. | |||
*/ | |||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ | |||
/* IRQ prologue code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR exit hook. | |||
*/ | |||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ | |||
/* IRQ epilogue code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread enter hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to activate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_ENTER_HOOK() { \ | |||
/* Idle-enter code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread leave hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to deactivate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||
/* Idle-leave code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle Loop hook. | |||
* @details This hook is continuously invoked by the idle thread loop. | |||
*/ | |||
#define CH_CFG_IDLE_LOOP_HOOK() { \ | |||
/* Idle loop code here.*/ \ | |||
} | |||
/** | |||
* @brief System tick event hook. | |||
* @details This hook is invoked in the system tick handler immediately | |||
* after processing the virtual timers queue. | |||
*/ | |||
#define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||
/* System tick event code here.*/ \ | |||
} | |||
/** | |||
* @brief System halt hook. | |||
* @details This hook is invoked in case to a system halting error before | |||
* the system is halted. | |||
*/ | |||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||
/* System halt code here.*/ \ | |||
} | |||
/** | |||
* @brief Trace hook. | |||
* @details This hook is invoked each time a new record is written in the | |||
* trace buffer. | |||
*/ | |||
#define CH_CFG_TRACE_HOOK(tep) { \ | |||
/* Trace code here.*/ \ | |||
} | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||
/*===========================================================================*/ | |||
#endif /* CHCONF_H */ | |||
/** @} */ |
@ -0,0 +1,107 @@ | |||
/* | |||
Copyright 2015 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xCA04 | |||
#define PRODUCT_ID 0x57F5 | |||
#define DEVICE_VER 0x0001 | |||
/* in python2: list(u"whatever".encode('utf-16-le')) */ | |||
/* at most 32 characters or the ugly hack in usb_main.c borks */ | |||
#define MANUFACTURER QMK | |||
#define PRODUCT Satisfaction75 | |||
#define DESCRIPTION Satisfaction 75 Keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 16 | |||
#define MATRIX_COL_PINS { B1, B2, B10, B11, B12, B13, B14, A8, A9, A10, B0, A7, A5, B5, A15, A1 } | |||
#define MATRIX_ROW_PINS { B3, B4, A0, A2, A4, A3 } | |||
#define DIODE_DIRECTION COL2ROW | |||
#define NUMBER_OF_ENCODERS 1 | |||
#define ENCODERS_PAD_A { B9 } | |||
#define ENCODERS_PAD_B { B8 } | |||
//LEDS A6, RGB B15 | |||
#define BACKLIGHT_LEVELS 24 | |||
#define BACKLIGHT_BREATHING | |||
#define BREATHING_PERIOD 6 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
#ifdef QWIIC_MICRO_OLED_ENABLE | |||
#undef I2C_ADDRESS_SA0_1 | |||
#define I2C_ADDRESS_SA0_1 0b0111100 | |||
#define LCDWIDTH 128 | |||
#define LCDHEIGHT 32 | |||
#endif | |||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4 | |||
// EEPROM usage | |||
// TODO: refactor with new user EEPROM code (coming soon) | |||
#define EEPROM_MAGIC 0x451F | |||
#define EEPROM_MAGIC_ADDR 32 | |||
// Bump this every time we change what we store | |||
// This will automatically reset the EEPROM with defaults | |||
// and avoid loading invalid data from the EEPROM | |||
#define EEPROM_VERSION 0x02 | |||
#define EEPROM_VERSION_ADDR 34 | |||
// Dynamic keymap starts after EEPROM version | |||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 | |||
// Dynamic macro starts after dynamic keymaps (35+(4*6*16*2)) = (35+768) | |||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 803 | |||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 221 | |||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16 | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION |
@ -0,0 +1,354 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/halconf.h | |||
* @brief HAL configuration header. | |||
* @details HAL configuration file, this file allows to enable or disable the | |||
* various device drivers from your application. You may also use | |||
* this file in order to override the device drivers default settings. | |||
* | |||
* @addtogroup HAL_CONF | |||
* @{ | |||
*/ | |||
#ifndef _HALCONF_H_ | |||
#define _HALCONF_H_ | |||
#include "mcuconf.h" | |||
/** | |||
* @brief Enables the PAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_PAL TRUE | |||
#endif | |||
/** | |||
* @brief Enables the ADC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
#define HAL_USE_ADC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the CAN subsystem. | |||
*/ | |||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
#define HAL_USE_CAN FALSE | |||
#endif | |||
/** | |||
* @brief Enables the DAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_DAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the EXT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) | |||
#define HAL_USE_EXT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the GPT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
#define HAL_USE_GPT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the I2C subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2C TRUE | |||
#endif | |||
/** | |||
* @brief Enables the I2S subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2S FALSE | |||
#endif | |||
/** | |||
* @brief Enables the ICU subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
#define HAL_USE_ICU FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_MAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MMC_SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_MMC_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the PWM subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
#define HAL_USE_PWM TRUE | |||
#endif | |||
/** | |||
* @brief Enables the RTC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
#define HAL_USE_RTC TRUE | |||
#endif | |||
/** | |||
* @brief Enables the SDC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
#define HAL_USE_SDC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL over USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL_USB FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_SPI TRUE | |||
#endif | |||
/** | |||
* @brief Enables the UART subsystem. | |||
*/ | |||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
#define HAL_USE_UART FALSE | |||
#endif | |||
/** | |||
* @brief Enables the USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_USB TRUE | |||
#endif | |||
/** | |||
* @brief Enables the WDG subsystem. | |||
*/ | |||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
#define HAL_USE_WDG FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* ADC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
#define ADC_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* CAN driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Sleep mode related APIs inclusion switch. | |||
*/ | |||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
#define CAN_USE_SLEEP_MODE TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* I2C driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||
*/ | |||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
#define MAC_USE_ZERO_COPY FALSE | |||
#endif | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
#define MAC_USE_EVENTS TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MMC_SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
* This option is recommended also if the SPI driver does not | |||
* use a DMA channel and heavily loads the CPU. | |||
*/ | |||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define MMC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SDC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Number of initialization attempts before rejecting the card. | |||
* @note Attempts are performed at 10mS intervals. | |||
*/ | |||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
#define SDC_INIT_RETRY 100 | |||
#endif | |||
/** | |||
* @brief Include support for MMC cards. | |||
* @note MMC support is not yet implemented so this option must be kept | |||
* at @p FALSE. | |||
*/ | |||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
#define SDC_MMC_SUPPORT FALSE | |||
#endif | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
*/ | |||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define SDC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Default bit rate. | |||
* @details Configuration parameter, this is the baud rate selected for the | |||
* default configuration. | |||
*/ | |||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
#define SERIAL_DEFAULT_BITRATE 38400 | |||
#endif | |||
/** | |||
* @brief Serial buffers size. | |||
* @details Configuration parameter, you can change the depth of the queue | |||
* buffers depending on the requirements of your application. | |||
* @note The default is 64 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_BUFFERS_SIZE 16 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL_USB driver related setting. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Serial over USB buffers size. | |||
* @details Configuration parameter, the buffer size must be a multiple of | |||
* the USB data endpoint maximum packet size. | |||
* @note The default is 64 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_SIZE 1 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
#define SPI_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* USB driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
#define USB_USE_WAIT TRUE | |||
#endif | |||
#endif /* _HALCONF_H_ */ | |||
/** @} */ |
@ -0,0 +1,116 @@ | |||
/* Copyright 2018 Jack Humbert | |||
* Copyright 2018 Yiancar | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
/* This library is only valid for STM32 processors. | |||
* This library follows the convention of the AVR i2c_master library. | |||
* As a result addresses are expected to be already shifted (addr << 1). | |||
* I2CD1 is the default driver which corresponds to pins B6 and B7. This | |||
* can be changed. | |||
* Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that | |||
* STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used | |||
* but using any other I2C pins should be trivial. | |||
*/ | |||
#include "i2c_master.h" | |||
#include "quantum.h" | |||
#include <string.h> | |||
#include <hal.h> | |||
#include "chtypes.h" | |||
#include "ch.h" | |||
static uint8_t i2c_address; | |||
// This configures the I2C clock to 400khz assuming a 48Mhz clock | |||
// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html | |||
static const I2CConfig i2cconfig = { | |||
STM32_TIMINGR_PRESC(0x00U) | | |||
STM32_TIMINGR_SCLDEL(0x03U) | STM32_TIMINGR_SDADEL(0x01U) | | |||
STM32_TIMINGR_SCLH(0x03U) | STM32_TIMINGR_SCLL(0x09U), | |||
0, | |||
0 | |||
}; | |||
__attribute__ ((weak)) | |||
void i2c_init(void) | |||
{ | |||
// Try releasing special pins for a short time | |||
palSetPadMode(GPIOB, 6, PAL_MODE_INPUT); | |||
palSetPadMode(GPIOB, 7, PAL_MODE_INPUT); | |||
chThdSleepMilliseconds(10); | |||
palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN); | |||
palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(1) | PAL_STM32_OTYPE_OPENDRAIN); | |||
//i2cInit(); //This is invoked by halInit() so no need to redo it. | |||
} | |||
// This is usually not needed | |||
uint8_t i2c_start(uint8_t address) | |||
{ | |||
i2c_address = address; | |||
i2cStart(&I2C_DRIVER, &i2cconfig); | |||
return 0; | |||
} | |||
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) | |||
{ | |||
msg_t status = MSG_OK; | |||
i2c_address = address; | |||
i2cStart(&I2C_DRIVER, &i2cconfig); | |||
i2cAcquireBus(&I2C_DRIVER); | |||
status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); | |||
i2cReleaseBus(&I2C_DRIVER); | |||
return status; | |||
} | |||
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) | |||
{ | |||
i2c_address = address; | |||
i2cStart(&I2C_DRIVER, &i2cconfig); | |||
return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout)); | |||
} | |||
uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) | |||
{ | |||
i2c_address = devaddr; | |||
i2cStart(&I2C_DRIVER, &i2cconfig); | |||
uint8_t complete_packet[length + 1]; | |||
for(uint8_t i = 0; i < length; i++) | |||
{ | |||
complete_packet[i+1] = data[i]; | |||
} | |||
complete_packet[0] = regaddr; | |||
return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout)); | |||
} | |||
uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout) | |||
{ | |||
i2c_address = devaddr; | |||
i2cStart(&I2C_DRIVER, &i2cconfig); | |||
return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout)); | |||
} | |||
// This is usually not needed. It releases the driver to allow pins to become GPIO again. | |||
uint8_t i2c_stop(uint16_t timeout) | |||
{ | |||
i2cStop(&I2C_DRIVER); | |||
return 0; | |||
} |
@ -0,0 +1,37 @@ | |||
/* | |||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_default( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, ENC_PRESS, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT_default( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1,49 @@ | |||
/* | |||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_default( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, ENC_PRESS, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT_default( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, OLED_TOGG, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLOCK_SET, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; | |||
void matrix_init_user(void) { | |||
//user initialization | |||
} | |||
void matrix_scan_user(void) { | |||
//user matrix | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
return true; | |||
} |
@ -0,0 +1,5 @@ | |||
# rules.mk overrides to enable VIA | |||
RAW_ENABLE = yes | |||
DYNAMIC_KEYMAP_ENABLE = yes | |||
@ -0,0 +1,240 @@ | |||
/* | |||
Copyright 2012 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "hal.h" | |||
#include "led_custom.h" | |||
#include "satisfaction75.h" | |||
#include "printf.h" | |||
static void breathing_callback(PWMDriver *pwmp); | |||
static PWMConfig pwmCFG = { | |||
0xFFFF, /* PWM clock frequency */ | |||
256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ | |||
NULL, /* No Callback */ | |||
{ | |||
{PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ | |||
{PWM_OUTPUT_DISABLED, NULL}, | |||
{PWM_OUTPUT_DISABLED, NULL}, | |||
{PWM_OUTPUT_DISABLED, NULL} | |||
}, | |||
0, /* HW dependent part.*/ | |||
0 | |||
}; | |||
static PWMConfig pwmCFG_breathing = { | |||
0xFFFF, /* 10kHz PWM clock frequency */ | |||
256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ | |||
breathing_callback, /* Breathing Callback */ | |||
{ | |||
{PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ | |||
{PWM_OUTPUT_DISABLED, NULL}, | |||
{PWM_OUTPUT_DISABLED, NULL}, | |||
{PWM_OUTPUT_DISABLED, NULL} | |||
}, | |||
0, /* HW dependent part.*/ | |||
0 | |||
}; | |||
// See http://jared.geek.nz/2013/feb/linear-led-pwm | |||
static uint16_t cie_lightness(uint16_t v) { | |||
if (v <= 5243) // if below 8% of max | |||
return v / 9; // same as dividing by 900% | |||
else { | |||
uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare | |||
// to get a useful result with integer division, we shift left in the expression above | |||
// and revert what we've done again after squaring. | |||
y = y * y * y >> 8; | |||
if (y > 0xFFFFUL) // prevent overflow | |||
return 0xFFFFU; | |||
else | |||
return (uint16_t) y; | |||
} | |||
} | |||
void backlight_init_ports(void) { | |||
palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); | |||
pwmStart(&PWMD3, &pwmCFG); | |||
if(kb_backlight_config.enable){ | |||
if(kb_backlight_config.breathing){ | |||
breathing_enable(); | |||
} else{ | |||
backlight_set(kb_backlight_config.level); | |||
} | |||
} else { | |||
backlight_set(0); | |||
} | |||
} | |||
void backlight_set(uint8_t level) { | |||
uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS)); | |||
if (level == 0) { | |||
// Turn backlight off | |||
pwmDisableChannel(&PWMD3, 0); | |||
} else { | |||
// Turn backlight on | |||
if(!is_breathing()){ | |||
pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty)); | |||
} | |||
} | |||
} | |||
uint8_t backlight_tick = 0; | |||
void backlight_task(void) { | |||
} | |||
#define BREATHING_NO_HALT 0 | |||
#define BREATHING_HALT_OFF 1 | |||
#define BREATHING_HALT_ON 2 | |||
#define BREATHING_STEPS 128 | |||
static uint8_t breathing_period = BREATHING_PERIOD; | |||
static uint8_t breathing_halt = BREATHING_NO_HALT; | |||
static uint16_t breathing_counter = 0; | |||
bool is_breathing(void) { | |||
return PWMD3.config == &pwmCFG_breathing; | |||
} | |||
#define breathing_min() do {breathing_counter = 0;} while (0) | |||
#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0) | |||
void breathing_interrupt_enable(void){ | |||
pwmStop(&PWMD3); | |||
pwmStart(&PWMD3, &pwmCFG_breathing); | |||
chSysLockFromISR(); | |||
pwmEnablePeriodicNotification(&PWMD3); | |||
pwmEnableChannelI( | |||
&PWMD3, | |||
0, | |||
PWM_FRACTION_TO_WIDTH( | |||
&PWMD3, | |||
0xFFFF, | |||
0xFFFF | |||
) | |||
); | |||
chSysUnlockFromISR(); | |||
} | |||
void breathing_interrupt_disable(void){ | |||
pwmStop(&PWMD3); | |||
pwmStart(&PWMD3, &pwmCFG); | |||
} | |||
void breathing_enable(void) | |||
{ | |||
breathing_counter = 0; | |||
breathing_halt = BREATHING_NO_HALT; | |||
breathing_interrupt_enable(); | |||
} | |||
void breathing_pulse(void) | |||
{ | |||
if (kb_backlight_config.level == 0) | |||
breathing_min(); | |||
else | |||
breathing_max(); | |||
breathing_halt = BREATHING_HALT_ON; | |||
breathing_interrupt_enable(); | |||
} | |||
void breathing_disable(void) | |||
{ | |||
breathing_interrupt_disable(); | |||
// Restore backlight level | |||
backlight_set(kb_backlight_config.level); | |||
} | |||
void breathing_self_disable(void) | |||
{ | |||
if (kb_backlight_config.level == 0) | |||
breathing_halt = BREATHING_HALT_OFF; | |||
else | |||
breathing_halt = BREATHING_HALT_ON; | |||
} | |||
void breathing_toggle(void) { | |||
if (is_breathing()){ | |||
breathing_disable(); | |||
} else { | |||
breathing_enable(); | |||
} | |||
} | |||
void breathing_period_set(uint8_t value) | |||
{ | |||
if (!value) | |||
value = 1; | |||
breathing_period = value; | |||
} | |||
void breathing_period_default(void) { | |||
breathing_period_set(BREATHING_PERIOD); | |||
} | |||
void breathing_period_inc(void) | |||
{ | |||
breathing_period_set(breathing_period+1); | |||
} | |||
void breathing_period_dec(void) | |||
{ | |||
breathing_period_set(breathing_period-1); | |||
} | |||
/* To generate breathing curve in python: | |||
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] | |||
*/ | |||
static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; | |||
// Use this before the cie_lightness function. | |||
static inline uint16_t scale_backlight(uint16_t v) { | |||
return v / BACKLIGHT_LEVELS * kb_backlight_config.level; | |||
} | |||
static void breathing_callback(PWMDriver *pwmp) | |||
{ | |||
(void)pwmp; | |||
uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS; | |||
// resetting after one period to prevent ugly reset at overflow. | |||
breathing_counter = (breathing_counter + 1) % (breathing_period * 256); | |||
uint8_t index = breathing_counter / interval % BREATHING_STEPS; | |||
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || | |||
((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) | |||
{ | |||
breathing_interrupt_disable(); | |||
} | |||
uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256)); | |||
chSysLockFromISR(); | |||
pwmEnableChannelI( | |||
&PWMD3, | |||
0, | |||
PWM_FRACTION_TO_WIDTH( | |||
&PWMD3, | |||
0xFFFF, | |||
duty | |||
) | |||
); | |||
chSysUnlockFromISR(); | |||
} |
@ -0,0 +1,5 @@ | |||
#pragma once | |||
void backlight_task(void); | |||
void breathing_interrupt_disable(void); | |||
void breathing_interrupt_enable(void); |
@ -0,0 +1,176 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#ifndef _MCUCONF_H_ | |||
#define _MCUCONF_H_ | |||
/* | |||
* STM32F0xx drivers configuration. | |||
* The following settings override the default settings present in | |||
* the various device driver implementation headers. | |||
* Note that the settings for each driver only have effect if the whole | |||
* driver is enabled in halconf.h. | |||
* | |||
* IRQ priorities: | |||
* 3...0 Lowest...Highest. | |||
* | |||
* DMA priorities: | |||
* 0...3 Lowest...Highest. | |||
*/ | |||
#define STM32F0xx_MCUCONF | |||
// #define STM32F070xB | |||
/* | |||
* HAL driver system settings. | |||
*/ | |||
#define STM32_NO_INIT FALSE | |||
#define STM32_PVD_ENABLE FALSE | |||
#define STM32_PLS STM32_PLS_LEV0 | |||
#define STM32_HSI_ENABLED TRUE | |||
#define STM32_HSI14_ENABLED TRUE | |||
#define STM32_HSI48_ENABLED FALSE | |||
#define STM32_LSI_ENABLED TRUE | |||
#define STM32_HSE_ENABLED FALSE | |||
#define STM32_LSE_ENABLED TRUE | |||
#define STM32_SW STM32_SW_PLL | |||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 | |||
#define STM32_PREDIV_VALUE 1 | |||
#define STM32_PLLMUL_VALUE 12 | |||
#define STM32_HPRE STM32_HPRE_DIV1 | |||
#define STM32_PPRE STM32_PPRE_DIV1 | |||
#define STM32_ADCSW STM32_ADCSW_HSI14 | |||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 | |||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK | |||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 | |||
#define STM32_ADCSW STM32_ADCSW_HSI14 | |||
#define STM32_USBSW STM32_USBSW_HSI48 | |||
#define STM32_CECSW STM32_CECSW_HSI | |||
#define STM32_I2C1SW STM32_I2C1SW_HSI | |||
#define STM32_USART1SW STM32_USART1SW_PCLK | |||
#define STM32_RTCSEL STM32_RTCSEL_LSE | |||
/* | |||
* ADC driver system settings. | |||
*/ | |||
#define STM32_ADC_USE_ADC1 FALSE | |||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||
#define STM32_ADC_IRQ_PRIORITY 2 | |||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 | |||
/* | |||
* EXT driver system settings. | |||
*/ | |||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 | |||
/* | |||
* GPT driver system settings. | |||
*/ | |||
#define STM32_GPT_USE_TIM1 FALSE | |||
#define STM32_GPT_USE_TIM2 FALSE | |||
#define STM32_GPT_USE_TIM3 FALSE | |||
#define STM32_GPT_USE_TIM14 FALSE | |||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2 | |||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2 | |||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2 | |||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2 | |||
/* | |||
* I2C driver system settings. | |||
*/ | |||
#define STM32_I2C_USE_I2C1 TRUE | |||
#define STM32_I2C_USE_I2C2 FALSE | |||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3 | |||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3 | |||
#define STM32_I2C_USE_DMA TRUE | |||
#define STM32_I2C_I2C1_DMA_PRIORITY 1 | |||
#define STM32_I2C_I2C2_DMA_PRIORITY 1 | |||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) | |||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) | |||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||
/* | |||
* ICU driver system settings. | |||
*/ | |||
#define STM32_ICU_USE_TIM1 FALSE | |||
#define STM32_ICU_USE_TIM2 FALSE | |||
#define STM32_ICU_USE_TIM3 FALSE | |||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3 | |||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3 | |||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3 | |||
/* | |||
* PWM driver system settings. | |||
*/ | |||
#define STM32_PWM_USE_ADVANCED FALSE | |||
#define STM32_PWM_USE_TIM1 FALSE | |||
#define STM32_PWM_USE_TIM2 FALSE | |||
#define STM32_PWM_USE_TIM3 TRUE | |||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3 | |||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3 | |||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3 | |||
/* | |||
* SERIAL driver system settings. | |||
*/ | |||
#define STM32_SERIAL_USE_USART1 FALSE | |||
#define STM32_SERIAL_USE_USART2 FALSE | |||
#define STM32_SERIAL_USART1_PRIORITY 3 | |||
#define STM32_SERIAL_USART2_PRIORITY 3 | |||
/* | |||
* SPI driver system settings. | |||
*/ | |||
#define STM32_SPI_USE_SPI1 FALSE | |||
#define STM32_SPI_USE_SPI2 TRUE | |||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2 | |||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2 | |||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) | |||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) | |||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||
/* | |||
* ST driver system settings. | |||
*/ | |||
#define STM32_ST_IRQ_PRIORITY 2 | |||
#define STM32_ST_USE_TIMER 2 | |||
/* | |||
* UART driver system settings. | |||
*/ | |||
#define STM32_UART_USE_USART1 FALSE | |||
#define STM32_UART_USE_USART2 FALSE | |||
#define STM32_UART_USART1_IRQ_PRIORITY 3 | |||
#define STM32_UART_USART2_IRQ_PRIORITY 3 | |||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||
/* | |||
* USB driver system settings. | |||
*/ | |||
#define STM32_USB_USE_USB1 TRUE | |||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE | |||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 | |||
#endif /* _MCUCONF_H_ */ |
@ -0,0 +1,12 @@ | |||
# Satisfaction75 | |||
Satisfaction75 Keyboard | |||
Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) | |||
Hardware Supported: STM32F072CBT6 | |||
Make example for this keyboard (after setting up your build environment): | |||
make cannonkeys/Satisfaction75:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,57 @@ | |||
# project specific files | |||
# SRC = ssd1306.c | |||
## chip/board settings | |||
# the next two should match the directories in | |||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) | |||
MCU_FAMILY = STM32 | |||
MCU_SERIES = STM32F0xx | |||
# linker script to use | |||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ | |||
# or <this_dir>/ld/ | |||
MCU_LDSCRIPT = STM32F072xB | |||
# startup code to use | |||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ | |||
MCU_STARTUP = stm32f0xx | |||
# it should exist either in <chibios>/os/hal/boards/ | |||
# or <this_dir>/boards | |||
BOARD = ST_STM32F072B_DISCOVERY | |||
# Cortex version | |||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 | |||
MCU = cortex-m0 | |||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 | |||
ARMV = 6 | |||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs, | |||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in | |||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have | |||
# a custom board definition that you plan to reuse). | |||
# If you're not setting it here, leave it commented out. | |||
# It is chip dependent, the correct number can be looked up here (page 175): | |||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf | |||
# This also requires a patch to chibios: | |||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch | |||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
SRC += led.c \ | |||
satisfaction_encoder.c \ | |||
satisfaction_oled.c | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
CUSTOM_MATRIX = no # Custom matrix file | |||
ENCODER_ENABLE = yes | |||
QWIIC_ENABLE += MICRO_OLED | |||
#BACKLIGHT_ENABLE = yes | |||
# RAW_ENABLE = yes | |||
# DYNAMIC_KEYMAP_ENABLE = yes | |||
DEFAULT_FOLDER = cannonkeys/satisfaction75 |
@ -0,0 +1,382 @@ | |||
#include "satisfaction75.h" | |||
#include "print.h" | |||
#include "debug.h" | |||
#include "ch.h" | |||
#include "hal.h" | |||
// #ifdef QWIIC_MICRO_OLED_ENABLE | |||
#include "micro_oled.h" | |||
#include "qwiic.h" | |||
#include "timer.h" | |||
#include "raw_hid.h" | |||
#include "dynamic_keymap.h" | |||
#include "tmk_core/common/eeprom.h" | |||
// HACK | |||
#include "keyboards/zeal60/zeal60_api.h" // Temporary hack | |||
#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack | |||
/* Artificial delay added to get media keys to work in the encoder*/ | |||
#define MEDIA_KEY_DELAY 10 | |||
uint16_t last_flush; | |||
volatile uint8_t led_numlock = false; | |||
volatile uint8_t led_capslock = false; | |||
volatile uint8_t led_scrolllock = false; | |||
uint8_t layer; | |||
bool queue_for_send = false; | |||
bool clock_set_mode = false; | |||
uint8_t oled_mode = OLED_DEFAULT; | |||
bool oled_sleeping = false; | |||
uint8_t encoder_value = 32; | |||
uint8_t encoder_mode = ENC_MODE_VOLUME; | |||
uint8_t enabled_encoder_modes = 0x1F; | |||
RTCDateTime last_timespec; | |||
uint16_t last_minute = 0; | |||
uint8_t time_config_idx = 0; | |||
int8_t hour_config = 0; | |||
int16_t minute_config = 0; | |||
int8_t year_config = 0; | |||
int8_t month_config = 0; | |||
int8_t day_config = 0; | |||
uint8_t previous_encoder_mode = 0; | |||
backlight_config_t kb_backlight_config = { | |||
.enable = true, | |||
.breathing = true, | |||
.level = BACKLIGHT_LEVELS | |||
}; | |||
bool eeprom_is_valid(void) | |||
{ | |||
return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && | |||
eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION); | |||
} | |||
void eeprom_set_valid(bool valid) | |||
{ | |||
eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF); | |||
eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF); | |||
} | |||
void eeprom_reset(void) | |||
{ | |||
// Set the Zeal60 specific EEPROM state as invalid. | |||
eeprom_set_valid(false); | |||
// Set the TMK/QMK EEPROM state as invalid. | |||
eeconfig_disable(); | |||
} | |||
#ifdef RAW_ENABLE | |||
void raw_hid_receive( uint8_t *data, uint8_t length ) | |||
{ | |||
uint8_t *command_id = &(data[0]); | |||
uint8_t *command_data = &(data[1]); | |||
switch ( *command_id ) | |||
{ | |||
case id_get_protocol_version: | |||
{ | |||
command_data[0] = PROTOCOL_VERSION >> 8; | |||
command_data[1] = PROTOCOL_VERSION & 0xFF; | |||
break; | |||
} | |||
case id_get_keyboard_value: | |||
{ | |||
if ( command_data[0] == id_uptime ) | |||
{ | |||
uint32_t value = timer_read32(); | |||
command_data[1] = (value >> 24 ) & 0xFF; | |||
command_data[2] = (value >> 16 ) & 0xFF; | |||
command_data[3] = (value >> 8 ) & 0xFF; | |||
command_data[4] = value & 0xFF; | |||
} | |||
else | |||
{ | |||
*command_id = id_unhandled; | |||
} | |||
break; | |||
} | |||
#ifdef DYNAMIC_KEYMAP_ENABLE | |||
case id_dynamic_keymap_get_keycode: | |||
{ | |||
uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] ); | |||
command_data[3] = keycode >> 8; | |||
command_data[4] = keycode & 0xFF; | |||
break; | |||
} | |||
case id_dynamic_keymap_set_keycode: | |||
{ | |||
dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] ); | |||
break; | |||
} | |||
case id_dynamic_keymap_reset: | |||
{ | |||
dynamic_keymap_reset(); | |||
break; | |||
} | |||
case id_dynamic_keymap_macro_get_count: | |||
{ | |||
command_data[0] = dynamic_keymap_macro_get_count(); | |||
break; | |||
} | |||
case id_dynamic_keymap_macro_get_buffer_size: | |||
{ | |||
uint16_t size = dynamic_keymap_macro_get_buffer_size(); | |||
command_data[0] = size >> 8; | |||
command_data[1] = size & 0xFF; | |||
break; | |||
} | |||
case id_dynamic_keymap_macro_get_buffer: | |||
{ | |||
uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; | |||
uint16_t size = command_data[2]; // size <= 28 | |||
dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] ); | |||
break; | |||
} | |||
case id_dynamic_keymap_macro_set_buffer: | |||
{ | |||
uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; | |||
uint16_t size = command_data[2]; // size <= 28 | |||
dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] ); | |||
break; | |||
} | |||
case id_dynamic_keymap_macro_reset: | |||
{ | |||
dynamic_keymap_macro_reset(); | |||
break; | |||
} | |||
case id_dynamic_keymap_get_layer_count: | |||
{ | |||
command_data[0] = dynamic_keymap_get_layer_count(); | |||
break; | |||
} | |||
case id_dynamic_keymap_get_buffer: | |||
{ | |||
uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; | |||
uint16_t size = command_data[2]; // size <= 28 | |||
dynamic_keymap_get_buffer( offset, size, &command_data[3] ); | |||
break; | |||
} | |||
case id_dynamic_keymap_set_buffer: | |||
{ | |||
uint16_t offset = ( command_data[0] << 8 ) | command_data[1]; | |||
uint16_t size = command_data[2]; // size <= 28 | |||
dynamic_keymap_set_buffer( offset, size, &command_data[3] ); | |||
break; | |||
} | |||
#endif // DYNAMIC_KEYMAP_ENABLE | |||
case id_eeprom_reset: | |||
{ | |||
eeprom_reset(); | |||
break; | |||
} | |||
case id_bootloader_jump: | |||
{ | |||
// Need to send data back before the jump | |||
// Informs host that the command is handled | |||
raw_hid_send( data, length ); | |||
// Give host time to read it | |||
wait_ms(100); | |||
bootloader_jump(); | |||
break; | |||
} | |||
default: | |||
{ | |||
// Unhandled message. | |||
*command_id = id_unhandled; | |||
break; | |||
} | |||
} | |||
// Return same buffer with values changed | |||
raw_hid_send( data, length ); | |||
} | |||
#endif | |||
void read_host_led_state(void) { | |||
uint8_t leds = host_keyboard_leds(); | |||
if (leds & (1 << USB_LED_NUM_LOCK)) { | |||
if (led_numlock == false){ | |||
led_numlock = true;} | |||
} else { | |||
if (led_numlock == true){ | |||
led_numlock = false;} | |||
} | |||
if (leds & (1 << USB_LED_CAPS_LOCK)) { | |||
if (led_capslock == false){ | |||
led_capslock = true;} | |||
} else { | |||
if (led_capslock == true){ | |||
led_capslock = false;} | |||
} | |||
if (leds & (1 << USB_LED_SCROLL_LOCK)) { | |||
if (led_scrolllock == false){ | |||
led_scrolllock = true;} | |||
} else { | |||
if (led_scrolllock == true){ | |||
led_scrolllock = false;} | |||
} | |||
} | |||
uint32_t layer_state_set_kb(uint32_t state) { | |||
state = layer_state_set_user(state); | |||
layer = biton32(state); | |||
queue_for_send = true; | |||
return state; | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
queue_for_send = true; | |||
switch (keycode) { | |||
case OLED_TOGG: | |||
if (record->event.pressed) { | |||
oled_mode = (oled_mode + 1) % _NUM_OLED_MODES; | |||
draw_ui(); | |||
} | |||
return false; | |||
case CLOCK_SET: | |||
if (record->event.pressed) { | |||
if(clock_set_mode){ | |||
pre_encoder_mode_change(); | |||
clock_set_mode = false; | |||
encoder_mode = previous_encoder_mode; | |||
post_encoder_mode_change(); | |||
}else{ | |||
previous_encoder_mode = encoder_mode; | |||
pre_encoder_mode_change(); | |||
clock_set_mode = true; | |||
encoder_mode = ENC_MODE_CLOCK_SET; | |||
post_encoder_mode_change(); | |||
} | |||
} | |||
return false; | |||
case ENC_PRESS: | |||
if (record->event.pressed) { | |||
uint16_t mapped_code = handle_encoder_press(); | |||
uint16_t held_keycode_timer = timer_read(); | |||
if(mapped_code != 0){ | |||
register_code(mapped_code); | |||
while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ } | |||
unregister_code(mapped_code); | |||
} | |||
} else { | |||
// Do something else when release | |||
} | |||
return false; | |||
default: | |||
break; | |||
} | |||
#ifdef DYNAMIC_KEYMAP_ENABLE | |||
// Handle macros | |||
if (record->event.pressed) { | |||
if ( keycode >= MACRO00 && keycode <= MACRO15 ) | |||
{ | |||
uint8_t id = keycode - MACRO00; | |||
dynamic_keymap_macro_send(id); | |||
return false; | |||
} | |||
} | |||
#endif //DYNAMIC_KEYMAP_ENABLE | |||
return process_record_user(keycode, record); | |||
} | |||
void encoder_update_kb(uint8_t index, bool clockwise) { | |||
encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64; | |||
queue_for_send = true; | |||
if (index == 0) { | |||
if (layer == 0){ | |||
uint16_t mapped_code = 0; | |||
if (clockwise) { | |||
mapped_code = handle_encoder_clockwise(); | |||
} else { | |||
mapped_code = handle_encoder_ccw(); | |||
} | |||
uint16_t held_keycode_timer = timer_read(); | |||
if(mapped_code != 0){ | |||
register_code(mapped_code); | |||
while (timer_elapsed(held_keycode_timer) < MEDIA_KEY_DELAY){ /* no-op */ } | |||
unregister_code(mapped_code); | |||
} | |||
} else { | |||
if(clockwise){ | |||
change_encoder_mode(false); | |||
} else { | |||
change_encoder_mode(true); | |||
} | |||
} | |||
} | |||
} | |||
void eeprom_init_kb(void) | |||
{ | |||
// If the EEPROM has the magic, the data is good. | |||
// OK to load from EEPROM. | |||
if (eeprom_is_valid()) { | |||
//backlight_config_load(); | |||
} else { | |||
// If the EEPROM has not been saved before, or is out of date, | |||
// save the default values to the EEPROM. Default values | |||
// come from construction of the zeal_backlight_config instance. | |||
//backlight_config_save(); | |||
#ifdef DYNAMIC_KEYMAP_ENABLE | |||
// This resets the keymaps in EEPROM to what is in flash. | |||
dynamic_keymap_reset(); | |||
// This resets the macros in EEPROM to nothing. | |||
dynamic_keymap_macro_reset(); | |||
#endif | |||
// Save the magic number last, in case saving was interrupted | |||
eeprom_set_valid(true); | |||
} | |||
} | |||
void matrix_init_kb(void) | |||
{ | |||
eeprom_init_kb(); | |||
rtcGetTime(&RTCD1, &last_timespec); | |||
queue_for_send = true; | |||
backlight_init_ports(); | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
rtcGetTime(&RTCD1, &last_timespec); | |||
uint16_t minutes_since_midnight = last_timespec.millisecond / 1000 / 60; | |||
if (minutes_since_midnight != last_minute){ | |||
last_minute = minutes_since_midnight; | |||
if(!oled_sleeping){ | |||
queue_for_send = true; | |||
} | |||
} | |||
if (queue_for_send && oled_mode != OLED_OFF) { | |||
oled_sleeping = false; | |||
read_host_led_state(); | |||
draw_ui(); | |||
queue_for_send = false; | |||
} | |||
if (timer_elapsed(last_flush) > ScreenOffInterval && !oled_sleeping) { | |||
send_command(DISPLAYOFF); /* 0xAE */ | |||
oled_sleeping = true; | |||
} | |||
} | |||
@ -0,0 +1,118 @@ | |||
#pragma once | |||
#include "quantum.h" | |||
// The first section contains all of the arguements | |||
// The second converts the arguments into a two-dimensional array | |||
#define LAYOUT_default( \ | |||
K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ | |||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \ | |||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ | |||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K315, \ | |||
K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, \ | |||
K500, K501, K502, K505, K509, K510, K511, K512, K513, K515 \ | |||
) { \ | |||
{ K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, KC_NO }, \ | |||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \ | |||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ | |||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO, K315 }, \ | |||
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, KC_NO, K415 }, \ | |||
{ K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, K509, K510, K511, K512, K513, KC_NO, K515 } \ | |||
} | |||
/* screen off after this many milliseconds */ | |||
#define ScreenOffInterval 60000 /* milliseconds */ | |||
typedef union { | |||
uint8_t raw; | |||
struct { | |||
bool enable :1; | |||
bool breathing : 1; | |||
uint8_t level :6; | |||
}; | |||
} backlight_config_t; | |||
// Start these at the USER code range in VIA | |||
enum my_keycodes { | |||
ENC_PRESS = 0x5F80, | |||
CLOCK_SET, | |||
OLED_TOGG | |||
}; | |||
enum encoder_modes { | |||
ENC_MODE_VOLUME, | |||
ENC_MODE_MEDIA, | |||
ENC_MODE_SCROLL, | |||
ENC_MODE_BRIGHTNESS, | |||
ENC_MODE_BACKLIGHT, | |||
ENC_MODE_CUSTOM0, | |||
ENC_MODE_CUSTOM1, | |||
ENC_MODE_CUSTOM2, | |||
_NUM_ENCODER_MODES, | |||
ENC_MODE_CLOCK_SET // This shouldn't be included in the default modes, so we put it after NUM_ENCODER_MODES | |||
}; | |||
enum oled_modes { | |||
OLED_DEFAULT, | |||
OLED_TIME, | |||
OLED_OFF, | |||
_NUM_OLED_MODES | |||
}; | |||
// Keyboard Information | |||
extern volatile uint8_t led_numlock; | |||
extern volatile uint8_t led_capslock; | |||
extern volatile uint8_t led_scrolllock; | |||
extern uint8_t layer; | |||
// OLED Behavior | |||
extern uint16_t last_flush; | |||
extern bool queue_for_send; | |||
extern uint8_t oled_mode; | |||
extern bool oled_sleeping; | |||
// Encoder Behavior | |||
extern uint8_t encoder_value; | |||
extern uint8_t encoder_mode; | |||
extern uint8_t enabled_encoder_modes; | |||
// RTC | |||
extern RTCDateTime last_timespec; | |||
extern uint16_t last_minute; | |||
// RTC Configuration | |||
extern bool clock_set_mode; | |||
extern uint8_t time_config_idx; | |||
extern int8_t hour_config; | |||
extern int16_t minute_config; | |||
extern int8_t year_config; | |||
extern int8_t month_config; | |||
extern int8_t day_config; | |||
extern uint8_t previous_encoder_mode; | |||
// Backlighting | |||
extern backlight_config_t kb_backlight_config; | |||
extern bool kb_backlight_breathing; | |||
void pre_encoder_mode_change(void); | |||
void post_encoder_mode_change(void); | |||
void change_encoder_mode(bool negative); | |||
uint16_t handle_encoder_clockwise(void); | |||
uint16_t handle_encoder_ccw(void); | |||
uint16_t handle_encoder_press(void); | |||
void update_time_config(int8_t increment); | |||
__attribute__ ((weak)) | |||
void draw_ui(void); | |||
void draw_default(void); | |||
void draw_clock(void); | |||
void backlight_init_ports(void); | |||
void backlight_set(uint8_t level); | |||
bool is_breathing(void); | |||
void breathing_enable(void); | |||
void breathing_disable(void); | |||
// void backlight_save_to_eeprom(uint8_t level); | |||
// uint8_t backlight_config_load(); |
@ -0,0 +1,174 @@ | |||
#include "satisfaction75.h" | |||
void pre_encoder_mode_change(){ | |||
if(encoder_mode == ENC_MODE_CLOCK_SET){ | |||
RTCDateTime timespec; | |||
timespec.year = year_config; | |||
timespec.month = month_config; | |||
timespec.day = day_config; | |||
// timespec.dayofweek = last_timespec.dayofweek; | |||
// timespec.dstflag = last_timespec.dstflag; | |||
timespec.millisecond = (hour_config * 60 + minute_config) * 60 * 1000; | |||
rtcSetTime(&RTCD1, ×pec); | |||
} | |||
} | |||
void post_encoder_mode_change(){ | |||
if(encoder_mode == ENC_MODE_CLOCK_SET){ | |||
hour_config = (last_minute / 60); | |||
minute_config = last_minute % 60; | |||
year_config = last_timespec.year; | |||
month_config = last_timespec.month; | |||
day_config = last_timespec.day; | |||
time_config_idx = 0; | |||
} | |||
} | |||
void change_encoder_mode(bool negative){ | |||
pre_encoder_mode_change(); | |||
do { | |||
if(negative){ | |||
if (encoder_mode == 0){ | |||
encoder_mode = _NUM_ENCODER_MODES - 1; | |||
} else{ | |||
encoder_mode = encoder_mode - 1; | |||
} | |||
} else { | |||
encoder_mode = (encoder_mode + 1) % _NUM_ENCODER_MODES; | |||
} | |||
} while(((1 << encoder_mode) & enabled_encoder_modes) == 0); | |||
post_encoder_mode_change(); | |||
} | |||
void update_time_config(int8_t increment){ | |||
uint8_t day_limit = 31; | |||
uint16_t adjusted_year = 1980 + year_config; | |||
switch(time_config_idx){ | |||
case 0: // hour | |||
default: | |||
hour_config = (hour_config + increment) % 24; | |||
if (hour_config < 0){ | |||
hour_config += 24; | |||
} | |||
break; | |||
case 1: // minute | |||
minute_config = (minute_config + increment) % 60; | |||
if (minute_config < 0){ | |||
minute_config += 60; | |||
} | |||
break; | |||
case 2: // year | |||
year_config += increment; | |||
break; | |||
case 3: // month | |||
month_config = (month_config % 12) + increment; | |||
if (month_config <= 0){ | |||
month_config += 12; | |||
} | |||
break; | |||
case 4: //day | |||
if (month_config == 9 || month_config == 4 || month_config == 6 || month_config == 11){ | |||
day_limit = 30; | |||
} else if(month_config == 2){ | |||
day_limit = adjusted_year % 4 == 0 && !(adjusted_year % 100 == 0 && adjusted_year % 400 != 0) ? 29 : 28; | |||
} | |||
day_config = (day_config % day_limit) + increment; | |||
if(day_config <= 0){ | |||
day_config += day_limit; | |||
} | |||
break; | |||
} | |||
} | |||
uint16_t handle_encoder_clockwise(){ | |||
uint16_t mapped_code = 0; | |||
switch(encoder_mode){ | |||
default: | |||
case ENC_MODE_VOLUME: | |||
mapped_code = KC_VOLU; | |||
break; | |||
case ENC_MODE_MEDIA: | |||
mapped_code = KC_MEDIA_NEXT_TRACK; | |||
break; | |||
case ENC_MODE_SCROLL: | |||
mapped_code = KC_WH_D; | |||
break; | |||
case ENC_MODE_BACKLIGHT: | |||
// mapped_code = BL_INC; | |||
kb_backlight_config.level = kb_backlight_config.level + 1; | |||
if(kb_backlight_config.level > BACKLIGHT_LEVELS){ | |||
kb_backlight_config.level = BACKLIGHT_LEVELS; | |||
} | |||
backlight_set(kb_backlight_config.level); | |||
break; | |||
case ENC_MODE_BRIGHTNESS: | |||
mapped_code = KC_BRIGHTNESS_UP; | |||
break; | |||
case ENC_MODE_CLOCK_SET: | |||
update_time_config(1); | |||
queue_for_send = true; | |||
break; | |||
} | |||
return mapped_code; | |||
} | |||
uint16_t handle_encoder_ccw(){ | |||
uint16_t mapped_code = 0; | |||
switch(encoder_mode){ | |||
default: | |||
case ENC_MODE_VOLUME: | |||
mapped_code = KC_VOLD; | |||
break; | |||
case ENC_MODE_MEDIA: | |||
mapped_code = KC_MEDIA_PREV_TRACK; | |||
break; | |||
case ENC_MODE_SCROLL: | |||
mapped_code = KC_WH_U; | |||
break; | |||
case ENC_MODE_BACKLIGHT: | |||
// mapped_code = BL_DEC; | |||
if(kb_backlight_config.level != 0){ | |||
kb_backlight_config.level = kb_backlight_config.level - 1; | |||
} | |||
backlight_set(kb_backlight_config.level); | |||
break; | |||
case ENC_MODE_BRIGHTNESS: | |||
mapped_code = KC_BRIGHTNESS_DOWN; | |||
break; | |||
case ENC_MODE_CLOCK_SET: | |||
update_time_config(-1); | |||
queue_for_send = true; | |||
break; | |||
} | |||
return mapped_code; | |||
} | |||
uint16_t handle_encoder_press(){ | |||
uint16_t mapped_code = 0; | |||
switch(encoder_mode){ | |||
case ENC_MODE_VOLUME: | |||
mapped_code = KC_MUTE; | |||
break; | |||
case ENC_MODE_MEDIA: | |||
mapped_code = KC_MEDIA_PLAY_PAUSE; | |||
break; | |||
case ENC_MODE_SCROLL: | |||
mapped_code = KC_BTN3; | |||
break; | |||
case ENC_MODE_BACKLIGHT: | |||
// mapped_code = BL_TOGG; | |||
kb_backlight_config.breathing = !kb_backlight_config.breathing; | |||
if(!kb_backlight_config.breathing){ | |||
breathing_disable(); | |||
} else{ | |||
breathing_enable(); | |||
} | |||
break; | |||
case ENC_MODE_CLOCK_SET: | |||
time_config_idx = (time_config_idx + 1) % 5; | |||
default: | |||
case ENC_MODE_BRIGHTNESS: | |||
break; | |||
} | |||
return mapped_code; | |||
} |
@ -0,0 +1,269 @@ | |||
#include "satisfaction75.h" | |||
#include "micro_oled.h" | |||
__attribute__ ((weak)) | |||
void draw_ui() { | |||
clear_buffer(); | |||
last_flush = timer_read(); | |||
send_command(DISPLAYON); | |||
if(clock_set_mode){ | |||
draw_clock(); | |||
return; | |||
} | |||
switch (oled_mode){ | |||
default: | |||
case OLED_DEFAULT: | |||
draw_default(); | |||
break; | |||
case OLED_TIME: | |||
draw_clock(); | |||
break; | |||
case OLED_OFF: | |||
send_command(DISPLAYOFF); | |||
break; | |||
} | |||
} | |||
void draw_encoder(int8_t startX, int8_t startY, bool show_legend){ | |||
if(show_legend){ | |||
draw_string(startX + 1, startY + 2, "ENC", PIXEL_ON, NORM, 0); | |||
} else { | |||
startX -= 22; | |||
} | |||
draw_rect_filled_soft(startX + 22, startY + 1, 3 + (3 * 6), 9, PIXEL_ON, NORM); | |||
char* mode_string = ""; | |||
switch(encoder_mode){ | |||
default: | |||
case ENC_MODE_VOLUME: | |||
mode_string = "VOL"; | |||
break; | |||
case ENC_MODE_MEDIA: | |||
mode_string = "MED"; | |||
break; | |||
case ENC_MODE_SCROLL: | |||
mode_string = "SCR"; | |||
break; | |||
case ENC_MODE_BRIGHTNESS: | |||
mode_string = "BRT"; | |||
break; | |||
case ENC_MODE_BACKLIGHT: | |||
mode_string = "BKL"; | |||
break; | |||
case ENC_MODE_CLOCK_SET: | |||
mode_string = "CLK"; | |||
break; | |||
case ENC_MODE_CUSTOM0: | |||
mode_string = "CS0"; | |||
break; | |||
case ENC_MODE_CUSTOM1: | |||
mode_string = "CS1"; | |||
break; | |||
case ENC_MODE_CUSTOM2: | |||
mode_string = "CS2"; | |||
break; | |||
} | |||
draw_string(startX + 24, startY + 2, mode_string, PIXEL_ON, XOR, 0); | |||
} | |||
void draw_layer_section(int8_t startX, int8_t startY, bool show_legend){ | |||
if(show_legend){ | |||
draw_string(startX + 1, startY + 2, "LAYER", PIXEL_ON, NORM, 0); | |||
} else { | |||
startX -= 32; | |||
} | |||
draw_rect_filled_soft(startX + 32, startY + 1, 9, 9, PIXEL_ON, NORM); | |||
draw_char(startX + 34, startY + 2, layer + 0x30, PIXEL_ON, XOR, 0); | |||
} | |||
void draw_default(){ | |||
uint8_t hour = last_minute / 60; | |||
uint16_t minute = last_minute % 60; | |||
if(encoder_mode == ENC_MODE_CLOCK_SET){ | |||
hour = hour_config; | |||
minute = minute_config; | |||
} | |||
bool is_pm = (hour / 12) > 0; | |||
hour = hour % 12; | |||
if (hour == 0){ | |||
hour = 12; | |||
} | |||
char hour_str[2] = ""; | |||
char min_str[2] = ""; | |||
sprintf(hour_str, "%02d", hour); | |||
sprintf(min_str, "%02d", minute); | |||
uint8_t mods = get_mods(); | |||
/* Layer indicator is 41 x 10 pixels */ | |||
draw_layer_section(0,0,true); | |||
#define ENCODER_INDICATOR_X 45 | |||
#define ENCODER_INDICATOR_Y 0 | |||
draw_encoder(ENCODER_INDICATOR_X, ENCODER_INDICATOR_Y, true); | |||
/* Matrix display is 19 x 9 pixels */ | |||
#define MATRIX_DISPLAY_X 0 | |||
#define MATRIX_DISPLAY_Y 18 | |||
for (uint8_t x = 0; x < MATRIX_ROWS; x++) { | |||
for (uint8_t y = 0; y < MATRIX_COLS; y++) { | |||
draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM); | |||
} | |||
} | |||
draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM); | |||
/* hadron oled location on thumbnail */ | |||
draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM); | |||
/* Mod display is 41 x 16 pixels */ | |||
#define MOD_DISPLAY_X 30 | |||
#define MOD_DISPLAY_Y 18 | |||
if (mods & MOD_LSFT) { | |||
draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); | |||
draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0); | |||
} else { | |||
draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0); | |||
} | |||
if (mods & MOD_LCTL) { | |||
draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); | |||
draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0); | |||
} else { | |||
draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0); | |||
} | |||
if (mods & MOD_LALT) { | |||
draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); | |||
draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0); | |||
} else { | |||
draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0); | |||
} | |||
if (mods & MOD_LGUI) { | |||
draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); | |||
draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0); | |||
} else { | |||
draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0); | |||
} | |||
/* Lock display is 23 x 21 */ | |||
#define LOCK_DISPLAY_X 100 | |||
#define LOCK_DISPLAY_Y 0 | |||
if (led_capslock == true) { | |||
draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM); | |||
draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_OFF, NORM, 0); | |||
} else if (led_capslock == false) { | |||
draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_ON, NORM, 0); | |||
} | |||
if (led_scrolllock == true) { | |||
draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM); | |||
draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_OFF, NORM, 0); | |||
} else if (led_scrolllock == false) { | |||
draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_ON, NORM, 0); | |||
} | |||
#define TIME_DISPLAY_X 82 | |||
#define TIME_DISPLAY_Y 22 | |||
draw_string(TIME_DISPLAY_X, TIME_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 0); | |||
draw_string(TIME_DISPLAY_X + 11, TIME_DISPLAY_Y, ":", PIXEL_ON, NORM, 0); | |||
draw_string(TIME_DISPLAY_X + 15, TIME_DISPLAY_Y, min_str, PIXEL_ON, NORM, 0); | |||
if(is_pm){ | |||
draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "pm", PIXEL_ON, NORM, 0); | |||
} else{ | |||
draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "am", PIXEL_ON, NORM, 0); | |||
} | |||
send_buffer(); | |||
} | |||
void draw_clock(){ | |||
int8_t hour = last_minute / 60; | |||
int16_t minute = last_minute % 60; | |||
int16_t year = last_timespec.year + 1980; | |||
int8_t month = last_timespec.month; | |||
int8_t day = last_timespec.day; | |||
if(encoder_mode == ENC_MODE_CLOCK_SET){ | |||
hour = hour_config; | |||
minute = minute_config; | |||
year = year_config + 1980; | |||
month = month_config; | |||
day = day_config; | |||
} | |||
bool is_pm = (hour / 12) > 0; | |||
hour = hour % 12; | |||
if (hour == 0){ | |||
hour = 12; | |||
} | |||
char hour_str[2] = ""; | |||
char min_str[2] = ""; | |||
char year_str[4] = ""; | |||
char month_str[2] = ""; | |||
char day_str[2] = ""; | |||
sprintf(hour_str, "%02d", hour); | |||
sprintf(min_str, "%02d", minute); | |||
sprintf(year_str, "%d", year); | |||
sprintf(month_str, "%02d", month); | |||
sprintf(day_str, "%02d", day); | |||
#define DATE_DISPLAY_X 6 | |||
#define DATE_DISPLAY_Y 0 | |||
draw_string(DATE_DISPLAY_X, DATE_DISPLAY_Y, year_str, PIXEL_ON, NORM, 0); | |||
draw_string(DATE_DISPLAY_X + 25, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); | |||
draw_string(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y, month_str, PIXEL_ON, NORM, 0); | |||
draw_string(DATE_DISPLAY_X + 44, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); | |||
draw_string(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y, day_str, PIXEL_ON, NORM, 0); | |||
#define CLOCK_DISPLAY_X 6 | |||
#define CLOCK_DISPLAY_Y 14 | |||
draw_string(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 1); | |||
draw_string(CLOCK_DISPLAY_X + 17, CLOCK_DISPLAY_Y, ":", PIXEL_ON, NORM, 1); | |||
draw_string(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y, min_str, PIXEL_ON, NORM, 1); | |||
if(is_pm){ | |||
draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "pm", PIXEL_ON, NORM, 1); | |||
} else{ | |||
draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "am", PIXEL_ON, NORM, 1); | |||
} | |||
if(clock_set_mode){ | |||
switch(time_config_idx){ | |||
case 0: // hour | |||
default: | |||
draw_line(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 16, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); | |||
break; | |||
case 1: // minute | |||
draw_line(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); | |||
break; | |||
case 2: // year | |||
draw_line(DATE_DISPLAY_X, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 23, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); | |||
break; | |||
case 3: // month | |||
draw_line(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 43, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); | |||
break; | |||
case 4: //day | |||
draw_line(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 61, DATE_DISPLAY_Y + 9,PIXEL_ON, NORM); | |||
break; | |||
} | |||
} | |||
draw_encoder(80, 0, true); | |||
draw_layer_section(80, 11, true); | |||
#define CAPS_DISPLAY_X 86 | |||
#define CAPS_DISPLAY_Y 22 | |||
if (led_capslock == true) { | |||
draw_rect_filled_soft(CAPS_DISPLAY_X, CAPS_DISPLAY_Y, 5 + (4 * 6), 9, PIXEL_ON, NORM); | |||
draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_OFF, NORM, 0); | |||
} else if (led_capslock == false) { | |||
draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_ON, NORM, 0); | |||
} | |||
send_buffer(); | |||
} |
@ -0,0 +1,7 @@ | |||
/* Address for jumping to bootloader on STM32 chips. */ | |||
/* It is chip dependent, the correct number can be looked up here (page 175): | |||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf | |||
* This also requires a patch to chibios: | |||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch | |||
*/ | |||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 |
@ -0,0 +1,524 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/chconf.h | |||
* @brief Configuration file template. | |||
* @details A copy of this file must be placed in each project directory, it | |||
* contains the application specific kernel settings. | |||
* | |||
* @addtogroup config | |||
* @details Kernel related settings and hooks. | |||
* @{ | |||
*/ | |||
#ifndef CHCONF_H | |||
#define CHCONF_H | |||
#define _CHIBIOS_RT_CONF_ | |||
/*===========================================================================*/ | |||
/** | |||
* @name System timers settings | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System time counter resolution. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
#define CH_CFG_ST_RESOLUTION 32 | |||
/** | |||
* @brief System tick frequency. | |||
* @details Frequency of the system timer that drives the system ticks. This | |||
* setting also defines the system tick time unit. | |||
*/ | |||
#define CH_CFG_ST_FREQUENCY 10000 | |||
/** | |||
* @brief Time delta constant for the tick-less mode. | |||
* @note If this value is zero then the system uses the classic | |||
* periodic tick. This value represents the minimum number | |||
* of ticks that is safe to specify in a timeout directive. | |||
* The value one is not valid, timeouts are rounded up to | |||
* this value. | |||
*/ | |||
#define CH_CFG_ST_TIMEDELTA 2 | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel parameters and options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Round robin interval. | |||
* @details This constant is the number of system ticks allowed for the | |||
* threads before preemption occurs. Setting this value to zero | |||
* disables the preemption for threads with equal priority and the | |||
* round robin becomes cooperative. Note that higher priority | |||
* threads can still preempt, the kernel is always preemptive. | |||
* @note Disabling the round robin preemption makes the kernel more compact | |||
* and generally faster. | |||
* @note The round robin preemption is not supported in tickless mode and | |||
* must be set to zero in that case. | |||
*/ | |||
#define CH_CFG_TIME_QUANTUM 0 | |||
/** | |||
* @brief Managed RAM size. | |||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||
* then the whole available RAM is used. The core memory is made | |||
* available to the heap allocator and/or can be used directly through | |||
* the simplified core memory allocator. | |||
* | |||
* @note In order to let the OS manage the whole RAM the linker script must | |||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||
*/ | |||
#define CH_CFG_MEMCORE_SIZE 0 | |||
/** | |||
* @brief Idle thread automatic spawn suppression. | |||
* @details When this option is activated the function @p chSysInit() | |||
* does not spawn the idle thread. The application @p main() | |||
* function becomes the idle thread and must implement an | |||
* infinite loop. | |||
*/ | |||
#define CH_CFG_NO_IDLE_THREAD FALSE | |||
/* Use __WFI in the idle thread for waiting. Does lower the power | |||
* consumption. */ | |||
#define CORTEX_ENABLE_WFI_IDLE TRUE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Performance options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief OS optimization. | |||
* @details If enabled then time efficient rather than space efficient code | |||
* is used when two possible implementations exist. | |||
* | |||
* @note This is not related to the compiler optimization options. | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_OPTIMIZE_SPEED FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Subsystem options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Time Measurement APIs. | |||
* @details If enabled then the time measurement APIs are included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_TM FALSE | |||
/** | |||
* @brief Threads registry APIs. | |||
* @details If enabled then the registry APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_REGISTRY TRUE | |||
/** | |||
* @brief Threads synchronization APIs. | |||
* @details If enabled then the @p chThdWait() function is included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_WAITEXIT TRUE | |||
/** | |||
* @brief Semaphores APIs. | |||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_SEMAPHORES TRUE | |||
/** | |||
* @brief Semaphores queuing mode. | |||
* @details If enabled then the threads are enqueued on semaphores by | |||
* priority rather than in FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||
/** | |||
* @brief Mutexes APIs. | |||
* @details If enabled then the mutexes APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MUTEXES TRUE | |||
/** | |||
* @brief Enables recursive behavior on mutexes. | |||
* @note Recursive mutexes are heavier and have an increased | |||
* memory footprint. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||
/** | |||
* @brief Conditional Variables APIs. | |||
* @details If enabled then the conditional variables APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#define CH_CFG_USE_CONDVARS TRUE | |||
/** | |||
* @brief Conditional Variables APIs with timeout. | |||
* @details If enabled then the conditional variables APIs with timeout | |||
* specification are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||
*/ | |||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE | |||
/** | |||
* @brief Events Flags APIs. | |||
* @details If enabled then the event flags APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_EVENTS TRUE | |||
/** | |||
* @brief Events Flags APIs with timeout. | |||
* @details If enabled then the events APIs with timeout specification | |||
* are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_EVENTS. | |||
*/ | |||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||
/** | |||
* @brief Synchronous Messages APIs. | |||
* @details If enabled then the synchronous messages APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MESSAGES TRUE | |||
/** | |||
* @brief Synchronous Messages queuing mode. | |||
* @details If enabled then messages are served by priority rather than in | |||
* FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||
*/ | |||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||
/** | |||
* @brief Mailboxes APIs. | |||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||
* included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#define CH_CFG_USE_MAILBOXES TRUE | |||
/** | |||
* @brief Core Memory Manager APIs. | |||
* @details If enabled then the core memory manager APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MEMCORE FALSE | |||
/** | |||
* @brief Heap Allocator APIs. | |||
* @details If enabled then the memory heap allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||
* @p CH_CFG_USE_SEMAPHORES. | |||
* @note Mutexes are recommended. | |||
*/ | |||
#define CH_CFG_USE_HEAP FALSE | |||
/** | |||
* @brief Memory Pools Allocator APIs. | |||
* @details If enabled then the memory pools allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#define CH_CFG_USE_MEMPOOLS FALSE | |||
/** | |||
* @brief Dynamic Threads APIs. | |||
* @details If enabled then the dynamic threads creation APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||
*/ | |||
#define CH_CFG_USE_DYNAMIC FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Debug options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Debug option, kernel statistics. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_STATISTICS FALSE | |||
/** | |||
* @brief Debug option, system state check. | |||
* @details If enabled the correct call protocol for system APIs is checked | |||
* at runtime. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE | |||
/** | |||
* @brief Debug option, parameters checks. | |||
* @details If enabled then the checks on the API functions input | |||
* parameters are activated. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_ENABLE_CHECKS FALSE | |||
/** | |||
* @brief Debug option, consistency checks. | |||
* @details If enabled then all the assertions in the kernel code are | |||
* activated. This includes consistency checks inside the kernel, | |||
* runtime anomalies and port-defined checks. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_ENABLE_ASSERTS FALSE | |||
/** | |||
* @brief Debug option, trace buffer. | |||
* @details If enabled then the trace buffer is activated. | |||
* | |||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||
/** | |||
* @brief Trace buffer entries. | |||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#define CH_DBG_TRACE_BUFFER_SIZE 128 | |||
/** | |||
* @brief Debug option, stack checks. | |||
* @details If enabled then a runtime stack check is performed. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note The stack check is performed in a architecture/port dependent way. | |||
* It may not be implemented or some ports. | |||
* @note The default failure mode is to halt the system with the global | |||
* @p panic_msg variable set to @p NULL. | |||
*/ | |||
#define CH_DBG_ENABLE_STACK_CHECK FALSE | |||
/** | |||
* @brief Debug option, stacks initialization. | |||
* @details If enabled then the threads working area is filled with a byte | |||
* value when a thread is created. This can be useful for the | |||
* runtime measurement of the used stack. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#define CH_DBG_FILL_THREADS FALSE | |||
/** | |||
* @brief Debug option, threads profiling. | |||
* @details If enabled then a field is added to the @p thread_t structure that | |||
* counts the system ticks occurred while executing the thread. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note This debug option is not currently compatible with the | |||
* tickless mode. | |||
*/ | |||
#define CH_DBG_THREADS_PROFILING FALSE | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel hooks | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Threads descriptor structure extension. | |||
* @details User fields added to the end of the @p thread_t structure. | |||
*/ | |||
#define CH_CFG_THREAD_EXTRA_FIELDS \ | |||
/* Add threads custom fields here.*/ | |||
/** | |||
* @brief Threads initialization hook. | |||
* @details User initialization code added to the @p chThdInit() API. | |||
* | |||
* @note It is invoked from within @p chThdInit() and implicitly from all | |||
* the threads creation APIs. | |||
*/ | |||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||
/* Add threads initialization code here.*/ \ | |||
} | |||
/** | |||
* @brief Threads finalization hook. | |||
* @details User finalization code added to the @p chThdExit() API. | |||
*/ | |||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||
/* Add threads finalization code here.*/ \ | |||
} | |||
/** | |||
* @brief Context switch hook. | |||
* @details This hook is invoked just before switching between threads. | |||
*/ | |||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||
/* Context switch code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR enter hook. | |||
*/ | |||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ | |||
/* IRQ prologue code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR exit hook. | |||
*/ | |||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ | |||
/* IRQ epilogue code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread enter hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to activate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_ENTER_HOOK() { \ | |||
/* Idle-enter code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread leave hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to deactivate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||
/* Idle-leave code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle Loop hook. | |||
* @details This hook is continuously invoked by the idle thread loop. | |||
*/ | |||
#define CH_CFG_IDLE_LOOP_HOOK() { \ | |||
/* Idle loop code here.*/ \ | |||
} | |||
/** | |||
* @brief System tick event hook. | |||
* @details This hook is invoked in the system tick handler immediately | |||
* after processing the virtual timers queue. | |||
*/ | |||
#define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||
/* System tick event code here.*/ \ | |||
} | |||
/** | |||
* @brief System halt hook. | |||
* @details This hook is invoked in case to a system halting error before | |||
* the system is halted. | |||
*/ | |||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||
/* System halt code here.*/ \ | |||
} | |||
/** | |||
* @brief Trace hook. | |||
* @details This hook is invoked each time a new record is written in the | |||
* trace buffer. | |||
*/ | |||
#define CH_CFG_TRACE_HOOK(tep) { \ | |||
/* Trace code here.*/ \ | |||
} | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||
/*===========================================================================*/ | |||
#endif /* CHCONF_H */ | |||
/** @} */ |
@ -0,0 +1 @@ | |||
#include "ck4x4.h" |
@ -0,0 +1,15 @@ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
k00, k01, k02, k03, \ | |||
k10, k11, k12, k13, \ | |||
k20, k21, k22, k23, \ | |||
k30, k31, k32, k33 \ | |||
) {\ | |||
{ k00, k01, k02, k03 }, \ | |||
{ k10, k11, k12, k13 }, \ | |||
{ k20, k21, k22, k23 }, \ | |||
{ k30, k31, k32, k33 }, \ | |||
} |
@ -0,0 +1,70 @@ | |||
/* | |||
Copyright 2015 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6464 | |||
#define DEVICE_VER 0x0001 | |||
/* in python2: list(u"whatever".encode('utf-16-le')) */ | |||
/* at most 32 characters or the ugly hack in usb_main.c borks */ | |||
#define MANUFACTURER QMK | |||
#define PRODUCT CK4x4 | |||
#define DESCRIPTION Cannon Keys 4x4 MacroPad | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 4 | |||
#define MATRIX_COL_PINS { B7, B8, B9, B10 } | |||
#define MATRIX_ROW_PINS { B3, B4, B5, B6 } | |||
#define DIODE_DIRECTION COL2ROW | |||
//LEDS A6, RGB B15 | |||
/* define if matrix has ghost */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
@ -0,0 +1,353 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/halconf.h | |||
* @brief HAL configuration header. | |||
* @details HAL configuration file, this file allows to enable or disable the | |||
* various device drivers from your application. You may also use | |||
* this file in order to override the device drivers default settings. | |||
* | |||
* @addtogroup HAL_CONF | |||
* @{ | |||
*/ | |||
#ifndef _HALCONF_H_ | |||
#define _HALCONF_H_ | |||
#include "mcuconf.h" | |||
/** | |||
* @brief Enables the PAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_PAL TRUE | |||
#endif | |||
/** | |||
* @brief Enables the ADC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
#define HAL_USE_ADC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the CAN subsystem. | |||
*/ | |||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
#define HAL_USE_CAN FALSE | |||
#endif | |||
/** | |||
* @brief Enables the DAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_DAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the EXT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) | |||
#define HAL_USE_EXT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the GPT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
#define HAL_USE_GPT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the I2C subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2C FALSE | |||
#endif | |||
/** | |||
* @brief Enables the I2S subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2S FALSE | |||
#endif | |||
/** | |||
* @brief Enables the ICU subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
#define HAL_USE_ICU FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_MAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MMC_SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_MMC_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the PWM subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
#define HAL_USE_PWM FALSE | |||
#endif | |||
/** | |||
* @brief Enables the RTC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
#define HAL_USE_RTC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SDC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
#define HAL_USE_SDC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL over USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL_USB FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the UART subsystem. | |||
*/ | |||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
#define HAL_USE_UART FALSE | |||
#endif | |||
/** | |||
* @brief Enables the USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_USB TRUE | |||
#endif | |||
/** | |||
* @brief Enables the WDG subsystem. | |||
*/ | |||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
#define HAL_USE_WDG FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* ADC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
#define ADC_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* CAN driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Sleep mode related APIs inclusion switch. | |||
*/ | |||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
#define CAN_USE_SLEEP_MODE TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* I2C driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||
*/ | |||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
#define MAC_USE_ZERO_COPY FALSE | |||
#endif | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
#define MAC_USE_EVENTS TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MMC_SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
* This option is recommended also if the SPI driver does not | |||
* use a DMA channel and heavily loads the CPU. | |||
*/ | |||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define MMC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SDC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Number of initialization attempts before rejecting the card. | |||
* @note Attempts are performed at 10mS intervals. | |||
*/ | |||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
#define SDC_INIT_RETRY 100 | |||
#endif | |||
/** | |||
* @brief Include support for MMC cards. | |||
* @note MMC support is not yet implemented so this option must be kept | |||
* at @p FALSE. | |||
*/ | |||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
#define SDC_MMC_SUPPORT FALSE | |||
#endif | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
*/ | |||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define SDC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Default bit rate. | |||
* @details Configuration parameter, this is the baud rate selected for the | |||
* default configuration. | |||
*/ | |||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
#define SERIAL_DEFAULT_BITRATE 38400 | |||
#endif | |||
/** | |||
* @brief Serial buffers size. | |||
* @details Configuration parameter, you can change the depth of the queue | |||
* buffers depending on the requirements of your application. | |||
* @note The default is 64 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_BUFFERS_SIZE 16 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL_USB driver related setting. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Serial over USB buffers size. | |||
* @details Configuration parameter, the buffer size must be a multiple of | |||
* the USB data endpoint maximum packet size. | |||
* @note The default is 64 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_SIZE 1 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
#define SPI_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* USB driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
#define USB_USE_WAIT TRUE | |||
#endif | |||
#endif /* _HALCONF_H_ */ | |||
/** @} */ |
@ -0,0 +1,29 @@ | |||
/* | |||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com> | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT(KC_7, KC_8, KC_9, KC_MINUS, \ | |||
KC_4, KC_5, KC_6, KC_PLUS, \ | |||
KC_1, KC_2, KC_3, KC_ENTER, \ | |||
RESET, KC_NO, KC_NO, KC_NO \ | |||
), // test with KC_CAPS, KC_A, RESET | |||
}; | |||
const uint16_t fn_actions[] = { | |||
}; |
@ -0,0 +1,171 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#ifndef _MCUCONF_H_ | |||
#define _MCUCONF_H_ | |||
/* | |||
* STM32F0xx drivers configuration. | |||
* The following settings override the default settings present in | |||
* the various device driver implementation headers. | |||
* Note that the settings for each driver only have effect if the whole | |||
* driver is enabled in halconf.h. | |||
* | |||
* IRQ priorities: | |||
* 3...0 Lowest...Highest. | |||
* | |||
* DMA priorities: | |||
* 0...3 Lowest...Highest. | |||
*/ | |||
#define STM32F0xx_MCUCONF | |||
/* | |||
* HAL driver system settings. | |||
*/ | |||
#define STM32_NO_INIT FALSE | |||
#define STM32_PVD_ENABLE FALSE | |||
#define STM32_PLS STM32_PLS_LEV0 | |||
#define STM32_HSI_ENABLED TRUE | |||
#define STM32_HSI14_ENABLED TRUE | |||
#define STM32_HSI48_ENABLED FALSE | |||
#define STM32_LSI_ENABLED TRUE | |||
#define STM32_HSE_ENABLED FALSE | |||
#define STM32_LSE_ENABLED FALSE | |||
#define STM32_SW STM32_SW_PLL | |||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 | |||
#define STM32_PREDIV_VALUE 1 | |||
#define STM32_PLLMUL_VALUE 12 | |||
#define STM32_HPRE STM32_HPRE_DIV1 | |||
#define STM32_PPRE STM32_PPRE_DIV1 | |||
#define STM32_ADCSW STM32_ADCSW_HSI14 | |||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 | |||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK | |||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 | |||
#define STM32_ADCSW STM32_ADCSW_HSI14 | |||
#define STM32_USBSW STM32_USBSW_HSI48 | |||
#define STM32_CECSW STM32_CECSW_HSI | |||
#define STM32_I2C1SW STM32_I2C1SW_HSI | |||
#define STM32_USART1SW STM32_USART1SW_PCLK | |||
#define STM32_RTCSEL STM32_RTCSEL_LSI | |||
/* | |||
* ADC driver system settings. | |||
*/ | |||
#define STM32_ADC_USE_ADC1 FALSE | |||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||
#define STM32_ADC_IRQ_PRIORITY 2 | |||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 | |||
/* | |||
* EXT driver system settings. | |||
*/ | |||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 | |||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 | |||
/* | |||
* GPT driver system settings. | |||
*/ | |||
#define STM32_GPT_USE_TIM1 FALSE | |||
#define STM32_GPT_USE_TIM2 FALSE | |||
#define STM32_GPT_USE_TIM3 FALSE | |||
#define STM32_GPT_USE_TIM14 FALSE | |||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2 | |||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2 | |||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2 | |||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2 | |||
/* | |||
* I2C driver system settings. | |||
*/ | |||
#define STM32_I2C_USE_I2C1 FALSE | |||
#define STM32_I2C_USE_I2C2 FALSE | |||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3 | |||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3 | |||
#define STM32_I2C_USE_DMA TRUE | |||
#define STM32_I2C_I2C1_DMA_PRIORITY 1 | |||
#define STM32_I2C_I2C2_DMA_PRIORITY 1 | |||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||
/* | |||
* ICU driver system settings. | |||
*/ | |||
#define STM32_ICU_USE_TIM1 FALSE | |||
#define STM32_ICU_USE_TIM2 FALSE | |||
#define STM32_ICU_USE_TIM3 FALSE | |||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3 | |||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3 | |||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3 | |||
/* | |||
* PWM driver system settings. | |||
*/ | |||
#define STM32_PWM_USE_ADVANCED FALSE | |||
#define STM32_PWM_USE_TIM1 FALSE | |||
#define STM32_PWM_USE_TIM2 FALSE | |||
#define STM32_PWM_USE_TIM3 FALSE | |||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3 | |||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3 | |||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3 | |||
/* | |||
* SERIAL driver system settings. | |||
*/ | |||
#define STM32_SERIAL_USE_USART1 FALSE | |||
#define STM32_SERIAL_USE_USART2 FALSE | |||
#define STM32_SERIAL_USART1_PRIORITY 3 | |||
#define STM32_SERIAL_USART2_PRIORITY 3 | |||
/* | |||
* SPI driver system settings. | |||
*/ | |||
#define STM32_SPI_USE_SPI1 FALSE | |||
#define STM32_SPI_USE_SPI2 FALSE | |||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2 | |||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2 | |||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||
/* | |||
* ST driver system settings. | |||
*/ | |||
#define STM32_ST_IRQ_PRIORITY 2 | |||
#define STM32_ST_USE_TIMER 2 | |||
/* | |||
* UART driver system settings. | |||
*/ | |||
#define STM32_UART_USE_USART1 FALSE | |||
#define STM32_UART_USE_USART2 FALSE | |||
#define STM32_UART_USART1_IRQ_PRIORITY 3 | |||
#define STM32_UART_USART2_IRQ_PRIORITY 3 | |||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||
/* | |||
* USB driver system settings. | |||
*/ | |||
#define STM32_USB_USE_USB1 TRUE | |||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE | |||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 | |||
#endif /* _MCUCONF_H_ */ |
@ -0,0 +1,3 @@ | |||
# CK4x4 | |||
Cannon Keys 4x4 Macro Pad |
@ -0,0 +1,49 @@ | |||
# project specific files | |||
# SRC = matrix.c \ | |||
# led.c | |||
## chip/board settings | |||
# the next two should match the directories in | |||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) | |||
MCU_FAMILY = STM32 | |||
MCU_SERIES = STM32F0xx | |||
# linker script to use | |||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ | |||
# or <this_dir>/ld/ | |||
MCU_LDSCRIPT = STM32F072xB | |||
# startup code to use | |||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ | |||
MCU_STARTUP = stm32f0xx | |||
# it should exist either in <chibios>/os/hal/boards/ | |||
# or <this_dir>/boards | |||
BOARD = ST_STM32F072B_DISCOVERY | |||
# Cortex version | |||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 | |||
MCU = cortex-m0 | |||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 | |||
ARMV = 6 | |||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs, | |||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in | |||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have | |||
# a custom board definition that you plan to reuse). | |||
# If you're not setting it here, leave it commented out. | |||
# It is chip dependent, the correct number can be looked up here (page 175): | |||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf | |||
# This also requires a patch to chibios: | |||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch | |||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
CUSTOM_MATRIX = no # Custom matrix file | |||
DEFAULT_FOLDER = handwired/ck4x4 |