Merge remote-tracking branch 'origin/master' into develop

keyboards/splitkb/zima/config.h

@@ -0,0 +1,93 @@
+/*
+Copyright 2019 Thomas Baart
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xF75B
+#define DEVICE_VER 0x0001
+#define MANUFACTURER splitkb
+#define PRODUCT Zima
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ */
+#define DIRECT_PINS { \
+    { C6, D6, D5 }, \
+    { C7, F7, D4 }, \
+    { E6, F5, F6 }, \
+    { F0, F1, F4 } \
+}
+
+#define UNUSED_PINS
+
+#define ENCODERS_PAD_A { B4 }
+#define ENCODERS_PAD_B { D7 }
+
+// #define QMK_ESC_OUTPUT B7
+// #define QMK_ESC_INPUT C6
+// #define QMK_SPEAKER B6
+
+#define B6_AUDIO
+#define AUDIO_CLICKY
+#define NO_MUSIC_MODE
+
+#define RGB_DI_PIN B5
+#define RGBLED_NUM 5
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_TWINKLE
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+#define FB_ERM_LRA 0
+#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#define FB_LOOPGAIN 1    /* For  Low:0, Medium:1, High:2, Very High:3 */
+
+/* Please refer to your datasheet for the optimal setting for your specific motor. */
+#define RATED_VOLTAGE 3
+#define V_PEAK 5
+
+#define DRV_GREETING alert_750ms
+#define DRV_MODE_DEFAULT buzz
+// EC11K encoders have a different resolution than other EC11 encoders.
+// When using the default resolution of 4, if you notice your encoder skipping
+// every other tick, lower the resolution to 2.
+#define ENCODER_RESOLUTION 2

keyboards/splitkb/zima/info.json

@@ -0,0 +1,25 @@
+{
+    "keyboard_name": "Zima",
+    "url": "splitkb.com",
+    "maintainer": "splitkb.com, drashna",
+    "width": 3,
+    "height": 4,
+    "layouts": {
+        "LAYOUT_ortho_4x3": {
+            "layout": [
+                {"label":"K00 (B0,B4)", "x":0, "y":1},
+                {"label":"K01 (B0,B5)", "x":1, "y":1},
+                {"label":"K02 (B0,B6)", "x":2, "y":1},
+                {"label":"K10 (B1,B4)", "x":0, "y":2},
+                {"label":"K11 (B1,B5)", "x":1, "y":2},
+                {"label":"K12 (B1,B6)", "x":2, "y":2},
+                {"label":"K20 (B2,B4)", "x":0, "y":3},
+                {"label":"K21 (B2,B5)", "x":1, "y":3},
+                {"label":"K22 (B2,B6)", "x":2, "y":3},
+                {"label":"K30 (B3,B4)", "x":0, "y":4},
+                {"label":"K31 (B3,B5)", "x":1, "y":4},
+                {"label":"K32 (B3,B6)", "x":2, "y":4}
+            ]
+        }
+    }
+}

keyboards/splitkb/zima/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/* Copyright 2019 Thomas Baart
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_4x3( /* Base */
+        KC_MUTE, TG(1),   TG(2),
+        KC_P7,   KC_P8,   KC_P9,
+        KC_P4,   KC_P5,   KC_P6,
+        KC_P1,   KC_P2,   KC_P3
+    ),
+    [1] = LAYOUT_ortho_4x3( /* Layer 1 */
+        RESET,   _______, XXXXXXX,
+        AU_ON,   AU_OFF,  XXXXXXX,
+        CK_TOGG, XXXXXXX, CK_UP,
+        CK_RST,  XXXXXXX, CK_DOWN
+    ),
+    [2] = LAYOUT_ortho_4x3( /* Layer 2*/
+        RGB_TOG, RGB_MOD, _______,
+        RGB_HUI, RGB_SAI, RGB_VAI,
+        RGB_HUD, RGB_SAD, RGB_VAD,
+        HPT_TOG, HPT_FBK, HPT_CONT
+    )
+};

keyboards/splitkb/zima/keymaps/default/readme.md

@@ -0,0 +1,7 @@
+# The default keymap for zima
+
+This includes support for the OLED and Encoder.  However, the actual code is found in the `zima.c` file. This can be replaced by adding your own `oled_task_user(void)` and `encoder_update_user` functinons. These will replace what is in the keyboard, and allow you to customize these features. 
+
+The reason that this is done this way, is so that this functionality will work on the [QMK Configurator](https://config.qmk.fm/#/splitkb/zima/LAYOUT_ortho_4x3)
+
+For reference, the code used for the oled and encoder defaults is in [zima.c](https://github.com/qmk/qmk_firmware/tree/master/keyboards/splitkb/zima/zima.c).

keyboards/splitkb/zima/readme.md

@@ -0,0 +1,17 @@
+# Zima
+
+![Zima](https://cdn.shopify.com/s/files/1/0227/9171/6941/products/Zima_Clear_Side.jpg?v=1596531772)
+
+A feature-packed twelve key macropad the size of a creditcard.
+
+* Keyboard Maintainer: [Thomas Baart](https://github.com/splitkb)
+* Hardware Supported: Onboard ATmega32u4 with speaker, encoder, RGB underglow, OLED and haptic support, with a Type C connector
+* Hardware Availability: [splitkb.com](https://splitkb.com/collections/keyboard-kits/products/zima)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make splitkb/zima:default
+    
+Keyboard can be put into bootloader mode by pressing the button to the right of the USB port on the underside of the PCB.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/splitkb/zima/rules.mk

@@ -0,0 +1,28 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes      # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no      # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no      # Enable Bluetooth
+AUDIO_ENABLE = yes         # Audio output
+
+ENCODER_ENABLE = yes       # ENables the use of one or more encoders
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+HAPTIC_ENABLE += DRV2605L  # Supported but not included by defaut
+
+LTO_ENABLE = yes

keyboards/splitkb/zima/zima.c

@@ -0,0 +1,112 @@
+/* Copyright 2019 Thomas Baart
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "zima.h"
+#include <stdio.h>
+
+#ifdef HAPTIC_ENABLE
+#    include "haptic.h"
+extern haptic_config_t haptic_config;
+#endif
+
+#ifdef OLED_DRIVER_ENABLE
+static bool is_asleep = false;
+static uint32_t oled_timer;
+
+void suspend_power_down_kb(void) {
+    is_asleep = true;
+    suspend_power_down_user();
+}
+
+void suspend_wakeup_init_kb(void) {
+    is_asleep = false;
+    suspend_wakeup_init_user();
+}
+
+__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; }
+
+__attribute__((weak)) void oled_task_user(void) {
+    if (is_asleep) {
+        oled_off();
+        return;
+    }
+
+    if (timer_elapsed32(oled_timer) < 30000) {
+        oled_on();
+        oled_scroll_off();
+        oled_write_P(PSTR("SplitKB's Zima"), false);
+        char layer[2] = {0};
+        snprintf(layer, sizeof(layer), "%d", get_highest_layer(layer_state));
+        oled_write_P(PSTR("   L:"), false);
+        oled_write_ln(layer, false);
+        oled_write_ln_P(PSTR("--------------"), false);
+        if (rgblight_is_enabled()) {
+            oled_write_P(PSTR("HSV: "), false);
+            char rgbs[14];
+            snprintf(rgbs, sizeof(rgbs), "%3d, %3d, %3d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val());
+            oled_write_ln(rgbs, false);
+        } else {
+            oled_write_ln_P(PSTR("RGB LIGHT DISABLED"), false);
+        }
+#    ifdef AUDIO_ENABLE
+        oled_write_P(PSTR("Audio:"), false);
+        is_audio_on() ? oled_write_P(PSTR(" on"), false) : oled_write_P(PSTR("off"), false);
+#        ifdef AUDIO_CLICKY
+        oled_write_P(PSTR(" Clicky:"), false);
+        (is_clicky_on() && is_audio_on()) ? oled_write_P(PSTR(" on"), false) : oled_write_P(PSTR("off"), false);
+#        endif
+#    endif
+    } else {
+        if (timer_elapsed32(oled_timer) < 120000) {
+            oled_on();
+            // clang-format off
+            static const char PROGMEM qmk_logo[] = {
+                0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+                0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+                0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+            // clang-format on
+            oled_write_ln_P(qmk_logo, false);
+            oled_scroll_right();
+        } else {
+            oled_off();
+        }
+    }
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
+    oled_timer = timer_read32();
+
+    return process_record_user(keycode, record);
+}
+#endif
+
+#ifdef ENCODER_ENABLE
+__attribute__((weak)) void encoder_update_user(uint8_t index, bool clockwise) {
+    if (clockwise) {
+        tap_code16(KC_VOLU);
+    } else {
+        tap_code16(KC_VOLD);
+    }
+#    ifdef OLED_DRIVER_ENABLE
+    oled_timer = timer_read32();
+#    endif
+#    if defined(AUDIO_ENABLE) && defined(AUDIO_CLICKY)
+    if (is_audio_on() && is_clicky_on()) clicky_play();
+#    endif
+#    ifdef HAPTIC_ENABLE
+    if (haptic_config.enable) haptic_play();
+#    endif
+}
+#endif

keyboards/splitkb/zima/zima.h

@@ -0,0 +1,29 @@
+/* Copyright 2019 Thomas Baart
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_4x3( \
+    k00, k01, k02, \
+    k03, k04, k05, \
+    k06, k07, k08, \
+    k09, k10, k11  \
+   ) { \
+    {k00, k01, k02}, \
+    {k03, k04, k05}, \
+    {k06, k07, k08}, \
+    {k09, k10, k11} }