* Initial Prime_E commit * Via support for Prime_EXL * Backlight testing * update libs * Clean up and addition of VIA compatibility. * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/primekb/prime_e/keymaps/default/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/primekb/prime_e/keymaps/default/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/primekb/prime_e/keymaps/default/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/handwired/prime_exl/keymaps/via/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * Update keyboards/primekb/prime_e/keymaps/default/keymap.c Co-Authored-By: holtenc <holtenc@gmail.com> * removed IS_COMMAND from config.h. updated GPIO commands * clean up libspull/5290/head
@ -0,0 +1,101 @@ | |||||
/* Copyright 2018 Holten Campbell | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
LAYOUT( | |||||
KC_NLCK, KC_LPRN, KC_RPRN, KC_PSLS, KC_PAST, KC_BSPC, KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||||
KC_F1, KC_F2, KC_P7, KC_P8, KC_P9, KC_DEL, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, | |||||
KC_F3, KC_F4, KC_P4, KC_P5, KC_P6, KC_PMNS, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(3), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, | |||||
KC_F5, KC_F6, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_LCTL, KC_LALT, KC_LBRC, KC_RBRC, MO(2), KC_SPC, KC_MINS, KC_EQL, KC_LGUI, MO(3), | |||||
KC_F7, KC_F8, MO(1), KC_PDOT, KC_P0, KC_PENT | |||||
), | |||||
LAYOUT( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_F9, KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(3), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_LALT, KC_LBRC, KC_RBRC, MO(2), KC_SPC, KC_MINS, KC_EQL, KC_LGUI, MO(3), | |||||
KC_LCTL, KC_LALT, TO(0), KC_P, KC_H, KC_SPC | |||||
), | |||||
LAYOUT( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_DEL, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_SCLN, KC_BSLS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, | |||||
BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
LAYOUT( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; | |||||
void matrix_init_user(void) { | |||||
// set CapsLock LED to output and low | |||||
setPinOutput(C6); | |||||
writePinHigh(C6); | |||||
// set NumLock LED to output and low | |||||
setPinOutput(B6); | |||||
writePinHigh(B6); | |||||
// set ScrollLock LED to output and low | |||||
setPinOutput(B5); | |||||
writePinHigh(B5); | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { | |||||
writePinLow(B6); | |||||
} else { | |||||
writePinHigh(B6); | |||||
} | |||||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { | |||||
writePinLow(B5); | |||||
} else { | |||||
writePinHigh(B5); | |||||
} | |||||
/* | |||||
if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { | |||||
writePinLow(C6); | |||||
} else { | |||||
writePinHigh(C6); | |||||
} | |||||
*/ | |||||
} | |||||
//function for layer indicator LED | |||||
uint32_t layer_state_set_user(uint32_t state) | |||||
{ | |||||
if (biton32(state) == 2) { | |||||
writePinLow(C6); | |||||
} else { | |||||
writePinHigh(C6); | |||||
} | |||||
return state; | |||||
} |
@ -0,0 +1 @@ | |||||
# The default keymap for prime_exl |
@ -0,0 +1,86 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Bootloader selection | |||||
# Teensy halfkay | |||||
# Pro Micro caterina | |||||
# Atmel DFU atmel-dfu | |||||
# LUFA DFU lufa-dfu | |||||
# QMK DFU qmk-dfu | |||||
# atmega32a bootloadHID | |||||
BOOTLOADER = atmel-dfu | |||||
# If you don't know the bootloader type, then you can specify the | |||||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) | |||||
# This is the VIA magic | |||||
RAW_ENABLE = yes | |||||
DYNAMIC_KEYMAP_ENABLE = yes | |||||
SRC += keyboards/wilba_tech/wt_main.c | |||||
@ -0,0 +1,72 @@ | |||||
/* | |||||
Copyright 2019 Holten Campbell | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0x5052 | |||||
#define PRODUCT_ID 0x0051 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER PrimeKB | |||||
#define PRODUCT Prime_E | |||||
#define DESCRIPTION Ergo_45 | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 4 | |||||
#define MATRIX_COLS 13 | |||||
/* Keyboard Matrix Assignments */ | |||||
#define MATRIX_ROW_PINS { E6, C7, B5, B4 } | |||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D6, D4, D5, D3, D2, D1, D0 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
#define BACKLIGHT_PIN B7 | |||||
#define BACKLIGHT_LEVELS 5 | |||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||||
#define DEBOUNCING_DELAY 5 | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4 | |||||
// EEPROM usage | |||||
// TODO: refactor with new user EEPROM code (coming soon) | |||||
#define EEPROM_MAGIC 0x451F | |||||
#define EEPROM_MAGIC_ADDR 32 | |||||
// Bump this every time we change what we store | |||||
// This will automatically reset the EEPROM with defaults | |||||
// and avoid loading invalid data from the EEPROM | |||||
#define EEPROM_VERSION 0x08 | |||||
#define EEPROM_VERSION_ADDR 34 | |||||
// Dynamic keymap starts after EEPROM version | |||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 35 | |||||
// Dynamic macro starts after dynamic keymaps (35+(4*13*4*2)) = (35+416) | |||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 451 | |||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 573 // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR | |||||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16 |
@ -0,0 +1,16 @@ | |||||
{ | |||||
"keyboard_name": "Prime_E", | |||||
"url": "https://www.primekb.com", | |||||
"maintainer": "holtenc", | |||||
"width": 13, | |||||
"height": 4, | |||||
"layouts": { | |||||
"LAYOUT": { | |||||
"layout": [{"x":0,"y":0,"w":1,"h":1}, {"x":1,"y":0,"w":1,"h":1}, {"x":2,"y":0,"w":1,"h":1}, {"x":3,"y":0,"w":1,"h":1}, {"x":4,"y":0,"w":1,"h":1}, {"x":5,"y":0,"w":1,"h":1}, {"x":7,"y":0,"w":1,"h":1}, {"x":8,"y":0,"w":1,"h":1}, {"x":9,"y":0,"w":1,"h":1}, {"x":10,"y":0,"w":1,"h":1}, {"x":11,"y":0,"w":1,"h":1}, {"x":12,"y":0,"w":1,"h":1}, {"x":13,"y":0,"w":1,"h":1}, | |||||
{"x":0,"y":1,"w":1.25,"h":1}, {"x":1.25,"y":1,"w":1,"h":1}, {"x":2.25,"y":1,"w":1,"h":1}, {"x":3.25,"y":1,"w":1,"h":1}, {"x":4.25,"y":1,"w":1,"h":1}, {"x":5.25,"y":1,"w":1,"h":1}, {"x":7.25,"y":1,"w":1,"h":1}, {"x":8.25,"y":1,"w":1,"h":1}, {"x":9.25,"y":1,"w":1,"h":1}, {"x":10.25,"y":1,"w":1,"h":1}, {"x":11.25,"y":1,"w":1,"h":1}, {"x":12.25,"y":1,"w":1.75,"h":1}, | |||||
{"x":0,"y":2,"w":1.75,"h":1}, {"x":1.75,"y":2,"w":1,"h":1}, {"x":2.75,"y":2,"w":1,"h":1}, {"x":3.75,"y":2,"w":1,"h":1}, {"x":4.75,"y":2,"w":1,"h":1}, {"x":5.75,"y":2,"w":1,"h":1}, {"x":6.75,"y":2,"w":1,"h":1}, {"x":7.75,"y":2,"w":1,"h":1}, {"x":8.75,"y":2,"w":1,"h":1}, {"x":9.75,"y":2,"w":1,"h":1}, {"x":10.75,"y":2,"w":1,"h":1}, {"x":11.75,"y":2,"w":1,"h":1}, {"x":12.75,"y":2,"w":1.25,"h":1}, | |||||
{"x":0,"y":3,"w":1.25,"h":1}, {"x":1.25,"y":3,"w":1.25,"h":1}, {"x":3.5,"y":3,"w":1.25,"h":1}, {"x":4.75,"y":3,"w":2,"h":1}, {"x":6.75,"y":3,"w":2.25,"h":1}, {"x":9,"y":3,"w":1.25,"h":1}, {"x":11.5,"y":3,"w":1.25,"h":1}, {"x":12.75,"y":3,"w":1.25,"h":1} | |||||
] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,74 @@ | |||||
/* Copyright 2018 Holten Campbell | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
LAYOUT( | |||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, | |||||
KC_LCTL, KC_LALT, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_LGUI, TO(1) | |||||
) | |||||
}; | |||||
void matrix_init_user(void) { | |||||
// set CapsLock LED to output and low | |||||
setPinOutput(B1); | |||||
writePinHigh(B1); | |||||
// set NumLock LED to output and low | |||||
setPinOutput(B2); | |||||
writePinHigh(B2); | |||||
// set ScrollLock LED to output and low | |||||
setPinOutput(B3); | |||||
writePinHigh(B3); | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { | |||||
writePinLow(B2); | |||||
} else { | |||||
writePinHigh(B2); | |||||
} | |||||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { | |||||
writePinLow(B1); | |||||
} else { | |||||
writePinHigh(B1); | |||||
} | |||||
/* | |||||
if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { | |||||
writePinLow(B3); | |||||
} else { | |||||
writePinHigh(B3); | |||||
}*/ | |||||
} | |||||
//function for layer indicator LED | |||||
uint32_t layer_state_set_user(uint32_t state) | |||||
{ | |||||
if (biton32(state) == 1) { | |||||
writePinLow(B3); | |||||
} else { | |||||
writePinHigh(B3); | |||||
} | |||||
return state; | |||||
} |
@ -0,0 +1,2 @@ | |||||
# The default keymap for Prime_E | |||||
This is the default keymap for Prime_E. |
@ -0,0 +1,73 @@ | |||||
/* Copyright 2018 Holten Campbell | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
LAYOUT( | |||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, | |||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, MO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, | |||||
KC_LCTL, KC_LALT, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_LGUI, TO(1) | |||||
) | |||||
}; | |||||
void matrix_init_user(void) { | |||||
// set CapsLock LED to output and low | |||||
setPinOutput(B1); | |||||
writePinHigh(B1); | |||||
// set NumLock LED to output and low | |||||
setPinOutput(B2); | |||||
writePinHigh(B2); | |||||
// set ScrollLock LED to output and low | |||||
setPinOutput(B3); | |||||
writePinHigh(B3); | |||||
} | |||||
void matrix_scan_user(void) { | |||||
} | |||||
void led_set_user(uint8_t usb_led) { | |||||
if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { | |||||
writePinLow(B2); | |||||
} else { | |||||
writePinHigh(B2); | |||||
} | |||||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { | |||||
writePinLow(B1); | |||||
} else { | |||||
writePinHigh(B1); | |||||
} | |||||
/* | |||||
if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { | |||||
writePinLow(B3); | |||||
} else { | |||||
writePinHigh(B3); | |||||
}*/ | |||||
} | |||||
//function for layer indicator LED | |||||
uint32_t layer_state_set_user(uint32_t state) | |||||
{ | |||||
if (biton32(state) == 1) { | |||||
writePinLow(B3); | |||||
} else { | |||||
writePinHigh(B3); | |||||
} | |||||
return state; | |||||
} |
@ -0,0 +1,2 @@ | |||||
# The VIA keymap for Prime_E | |||||
This keymap is for compatibility with the VIA configurator. |
@ -0,0 +1,85 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Bootloader selection | |||||
# Teensy halfkay | |||||
# Pro Micro caterina | |||||
# Atmel DFU atmel-dfu | |||||
# LUFA DFU lufa-dfu | |||||
# QMK DFU qmk-dfu | |||||
# atmega32a bootloadHID | |||||
BOOTLOADER = atmel-dfu | |||||
# If you don't know the bootloader type, then you can specify the | |||||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) | |||||
# This is the VIA magic | |||||
RAW_ENABLE = yes | |||||
DYNAMIC_KEYMAP_ENABLE = yes | |||||
SRC += keyboards/wilba_tech/wt_main.c |
@ -0,0 +1,22 @@ | |||||
/* Copyright 2019 Holten Campbell | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "prime_e.h" | |||||
void led_set_kb(uint8_t usb_led) { | |||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here | |||||
led_set_user(usb_led); | |||||
} |
@ -0,0 +1,34 @@ | |||||
/* Copyright 2019 Holten Campbell | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
#define LAYOUT( \ | |||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ | |||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K112, \ | |||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ | |||||
K300, K301, K303, K304, K306, K308, K311, K312 \ | |||||
) { \ | |||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012 }, \ | |||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, KC_NO, K112 }, \ | |||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ | |||||
{ K300, K301, KC_NO, K303, K304, KC_NO, K306, KC_NO, K308, KC_NO, KC_NO, K311, K312 } \ | |||||
} | |||||
@ -0,0 +1,16 @@ | |||||
# Prime_E | |||||
![Prime_E](https://imgur.com/7Rl4JOA.jpg) | |||||
An ergonomic 45%. | |||||
Keyboard Maintainer: [Holtenc](https://github.com/holtenc/) | |||||
Hardware Supported: Prime_E PCB, ATMega32u4 | |||||
Hardware Availability: Group Buy, Retail | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make prime_e:default | |||||
make prime_e:via (when using VIA configurator) | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,80 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Processor frequency. | |||||
# This will define a symbol, F_CPU, in all source code files equal to the | |||||
# processor frequency in Hz. You can then use this symbol in your source code to | |||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||||
# automatically to create a 32-bit value in your source code. | |||||
# | |||||
# This will be an integer division of F_USB below, as it is sourced by | |||||
# F_USB after it has run through any CPU prescalers. Note that this value | |||||
# does not *change* the processor frequency - it should merely be updated to | |||||
# reflect the processor speed set externally so that the code can use accurate | |||||
# software delays. | |||||
F_CPU = 16000000 | |||||
# | |||||
# LUFA specific | |||||
# | |||||
# Target architecture (see library "Board Types" documentation). | |||||
ARCH = AVR8 | |||||
# Input clock frequency. | |||||
# This will define a symbol, F_USB, in all source code files equal to the | |||||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||||
# at the end, this will be done automatically to create a 32-bit value in your | |||||
# source code. | |||||
# | |||||
# If no clock division is performed on the input clock inside the AVR (via the | |||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||||
F_USB = $(F_CPU) | |||||
# Interrupt driven control endpoint task(+60) | |||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||||
# Bootloader selection | |||||
# Teensy halfkay | |||||
# Pro Micro caterina | |||||
# Atmel DFU atmel-dfu | |||||
# LUFA DFU lufa-dfu | |||||
# QMK DFU qmk-dfu | |||||
# atmega32a bootloadHID | |||||
BOOTLOADER = atmel-dfu | |||||
# If you don't know the bootloader type, then you can specify the | |||||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line | |||||
# Teensy halfKay 512 | |||||
# Teensy++ halfKay 1024 | |||||
# Atmel DFU loader 4096 | |||||
# LUFA bootloader 4096 | |||||
# USBaspLoader 2048 | |||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700) | |||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450) | |||||
CONSOLE_ENABLE = no # Console for debug(+400) | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = yes # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||||
UNICODE_ENABLE = no # Unicode | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) |