Co-authored-by: Ryan <fauxpark@gmail.com>pull/12468/head
@ -0,0 +1,123 @@ | |||
/* Copyright 2021 Jason Williams (Wilba) | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
// USB Device descriptor parameter | |||
#define VENDOR_ID 0x5241 // "RA" | |||
#define PRODUCT_ID 0x4B52 // "KR" | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER RAMA WORKS | |||
#define PRODUCT RAMA WORKS KARA | |||
// key matrix size | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 14 | |||
// M60-A PCB default pin-out | |||
#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 } | |||
#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 } | |||
#define UNUSED_PINS | |||
// IS31FL3731 driver | |||
#define DRIVER_COUNT 2 | |||
#define DRIVER_LED_TOTAL 72 | |||
// COL2ROW or ROW2COL | |||
#define DIODE_DIRECTION COL2ROW | |||
// Set 0 if debouncing isn't needed | |||
#define DEBOUNCE 5 | |||
// Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap | |||
#define LOCKING_SUPPORT_ENABLE | |||
// Locking resynchronize hack | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
// disable debug print | |||
//#define NO_DEBUG | |||
// disable print | |||
//#define NO_PRINT | |||
// disable action features | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
#define RGB_BACKLIGHT_ENABLED 1 | |||
// This conditionally compiles the backlight code for M60-A specifics | |||
#define RGB_BACKLIGHT_M60_A | |||
// enable/disable LEDs based on layout | |||
// they aren't really used if RGB_BACKLIGHT_M60_A defined | |||
#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 1 | |||
#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0 | |||
#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 | |||
#define RGB_BACKLIGHT_USE_7U_SPACEBAR 1 | |||
#define RGB_BACKLIGHT_USE_ISO_ENTER 0 | |||
#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 1 | |||
// disable backlight when USB suspended (PC sleep/hibernate/shutdown) | |||
#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0 | |||
// disable backlight after timeout in minutes, 0 = no timeout | |||
#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0 | |||
// the default brightness | |||
#define RGB_BACKLIGHT_BRIGHTNESS 255 | |||
// the default effect (RGB test) | |||
#define RGB_BACKLIGHT_EFFECT 255 | |||
// the default effect speed (0-3) | |||
#define RGB_BACKLIGHT_EFFECT_SPEED 0 | |||
// the default color1 and color2 | |||
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 } | |||
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 } | |||
// These define which keys in the matrix are alphas/mods | |||
// Used for backlight effects so colors are different for | |||
// alphas vs. mods | |||
// Each value is for a row, bit 0 is column 0 | |||
// Alpha=0 Mod=1 | |||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001 | |||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001 | |||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001 | |||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001 | |||
#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111 | |||
#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } | |||
#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } | |||
#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } | |||
#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 } | |||
// Backlight config starts after VIA's EEPROM usage, | |||
// dynamic keymaps start after this. | |||
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31 | |||
// VIA lighting is handled by the keyboard-level code | |||
#define VIA_CUSTOM_LIGHTING_ENABLE |
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "RAMA WORKS KARA", | |||
"url": "http://rama.works", | |||
"maintainer": "Wilba", | |||
"width": 15, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT_60_hhkb": { | |||
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] | |||
} | |||
} | |||
} |
@ -0,0 +1,55 @@ | |||
/* Copyright 2021 Jason Williams (Wilba) | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
// Default layout for RAMA WORKS KARA | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
// Default layer | |||
[0] = LAYOUT_60_hhkb( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_MO13, | |||
KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_MO23), | |||
// Fn1 Layer | |||
[1] = LAYOUT_60_hhkb( | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, | |||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
// Fn2 Layer | |||
[2] = LAYOUT_60_hhkb( | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
// Fn3 Layer | |||
[3] = LAYOUT_60_hhkb( | |||
KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC, BR_INC, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC, ES_INC, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
}; | |||
@ -0,0 +1 @@ | |||
#include "../default/keymap.c" |
@ -0,0 +1 @@ | |||
VIA_ENABLE = yes |
@ -0,0 +1,18 @@ | |||
/* Copyright 2021 Jason Williams (Wilba) | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef RGB_BACKLIGHT_M60_A | |||
#error RGB_BACKLIGHT_M60_A not defined | |||
#endif |
@ -0,0 +1,37 @@ | |||
/* Copyright 2021 Jason Williams (Wilba) | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h" | |||
#include "via.h" | |||
#define XXX KC_NO | |||
#define LAYOUT_60_hhkb( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ | |||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ | |||
K41, K42, K47, K4B, K4C \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ | |||
{ K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ | |||
{ XXX, K41, K42, XXX, XXX, XXX, XXX, K47, XXX, XXX, XXX, K4B, K4C, XXX } \ | |||
} | |||
@ -0,0 +1,13 @@ | |||
# RAMA WORKS KARA | |||
KARA is a keyboard PCB supporting HHKB layout and daughterboard USB-C. [More info at RAMA WORKS](https://rama.works/kara/) | |||
* Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582) | |||
* Hardware Supported: RAMA WORKS KARA PCB | |||
* Hardware Availability: [RAMA WORKS Store](https://ramaworks.store/) | |||
Make example for this keyboard (after setting up your build environment): | |||
make wilba_tech/rama_works_kara:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,38 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Do not put the microcontroller into power saving mode | |||
# when we get USB suspend event. We want it to keep updating | |||
# backlight effects. | |||
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
CIE1931_CURVE = yes | |||
LAYOUTS = 60_hhkb | |||
# project specific files | |||
SRC = keyboards/wilba_tech/wt_main.c \ | |||
keyboards/wilba_tech/wt_rgb_backlight.c \ | |||
quantum/color.c \ | |||
drivers/issi/is31fl3731.c \ | |||
drivers/avr/i2c_master.c |